132 KiB

Raw Permalink Blame History

PyLink 3.1.0 (2023-01-03)

This will be my (@jlu5’s) last release.

Changes since 3.1-beta1:

Feature changes

Allow loading a custom CA certificate via a ssl_cafile option (#677). Thanks to @paigeadelethompson for contributing

Bug fixes

relay: strip slashes (/) from idents
raw: fix permission check logic

PyLink 3.1-beta1 (2021-12-30)

Feature changes

PyLink now requires Python >= 3.7
protocols/inspircd now defaults to InspIRCd 3.x mode (target_version=insp3)
Default to system IPv4/IPv6 preference when resolving hostnames. For existing users, this means that PyLink will most likely default to IPv6 when resolving hostnames if your server supports it!
- You can override this by setting ipv6: false in your server config block or using an explicit bindhost. Connections made to IPs directly are not affected.
[SECURITY] exec and raw plugins are now locked behind config options, to disable running arbitrary code by admins
Implement path configuration for PyLink data files (#659)

Bug fixes

Various fixes as detected by pylint, thanks to @Celelibi for reporting
ircs2s_common: fix parsing clash if the sender’s nick matches an IRC command (e.g. on UnrealIRCd)
ircs2s_common: gracefully handle QUIT messages without a reason (seen on Anope / InspIRCd)
Properly handle EAGAIN in non-blocking sockets
relay: fix “channel not found” errors on LINK when the remote casemapping differs. This mainly affects channels with “|” and other RFC1459 special cases in their name
unreal: bounce attempts to CHGIDENT/HOST/NAME services clients
unreal: fix formatting of outgoing /kill (#671)
opercmds: remove double “Killed by” prefixes in the kill command

Internal improvements

Added best-effort tracking of user SSL/TLS status (#169)
Add support for oper notices (GLOBOPS/OPERWALL) (#511)
relay: better ident sanitizing for IRCd-Hybrid
Refactored UID generators to be more concise

PyLink 3.0.0 (2020-04-11)

Changes since 3.0-rc1:

Added new install instructions via Docker
global: fix type-safety errors when connected to pylink-discord
Various code cleanup

For a broader summary of changes since 2.0.x, consult the below release notes for PyLink 3.0-rc1.

PyLink 3.0-rc1 (2020-02-22)

PyLink 3.0 brings PyLink up to date with the latest IRCds (InspIRCd 3, UnrealIRCd 5), and introduces Discord integration via the pylink-discord contrib module. It also improves support for Unicode nicks in Relay and Clientbot.

Major changes since PyLink 2.0.x

Added support for InspIRCd 3 and UnrealIRCd 5.x:
- To enable InspIRCd 3 link mode (highly recommended) on InspIRCd 3 networks, set the target_version: insp3 option in the relevant network’s server block.
- For UnrealIRCd 5 support, no changes in PyLink are necessary.
Updated list of required dependencies: added cachetools, removed ircmatch and expiringdict
Relay: added an optional dependency on unidecode, to translate Unicode nicks to ASCII on networks not supporting it.
- Also, nick normalization is now skipped on protocols where it is not necessary (Clientbot, Discord)
Relay now tracks kill/mode/topic clashes and will stop relaying when it detects such a conflict (issue#23)
Changehost now supports network-specific configuration (issue#611) and listening for services account changes - this allows for consistent account based hostmasks for SASL gateways, etc.
Clientbot: added an option to continuously rejoin channels the bot is not in. issue#647
Antispam: added optional quit/part message filtering (issue#617)

API changes

API Break: Channel, Server, and User keys may now be type int - previously, they were always strings.
API Break: PyLink now supports having multiple UIDs mapping to the same nick, as this is common on platforms like Discord.
- nick_to_uid() has been reworked to optionally return multiple nicks when multi=True
- Using nick_to_uid() without this option will raise a warning if duplicate nicks are present, and may be deprecated in the future.
Added utils.match_text(), a general (regex-based) glob matcher to replace ircmatch calls (issue#636).
Editing hook payloads is now officially supported in plugin hook handlers (issue#452)
Added new protocol module capabilities:
- can-manage-bot-channels
- freeform-nicks
- has-irc-modes
- virtual-server
SQUIT hooks now track a list of affected servers (SIDs) in the affected_servers field

This branch was previously known as PyLink 2.1. For more detailed changes between 3.0-rc1 and individual 2.1 snapshots, see their separate changelogs below.

Changes since PyLink 2.1-beta1

Feature changes

Added a Dockerfile for PyLink, thanks to @jameswritescode. Official images will be available on Docker Hub before the final 2.1 release.
unreal: declare support for usermodes +G (censor) and +Z (secureonlymsg)
The version command now prints the Python interpreter version to assist with debugging

Bug fixes

Fix desync when removing multiple ban modes in one MODE command (regression from 2.1-beta1)
p10: properly ignore ACCOUNT subcommands other than R, M, and U
Fix extraneous lowercasing of the network name in the $account exttarget, causing per-network matches to fail if the network name had capital letters
inspircd: negotiate casemapping setting on link for InspIRCd 3. issue#654
ircs2s_common: fix crash when failing to extract KILL reason

Documentation changes

relay-quickstart: describe delinking another network from channels owned by the caller’s network
Refreshed mode list documentation

Internal improvements

Debug logs for mode parsers and other miscellaneous internals are now less noisy
inspircd: warn when using InspIRCd 2 compat mode on an InspIRCd 3 uplink - some commands like KICK are not translated correctly in this mode
classes: fix SyntaxWarning: "is" with a literal on Python 3.8

PyLink 2.1-beta1 (2019-12-08)

Feature changes

Declare support for UnrealIRCd 5.0.0-rc2+. Since the S2S protocol has not changed significantly, no protocol changes are needed for this to work.
- UnrealIRCd 5.0.0-rc1 suffers from a message routing bug and is not supported.
clientbot: added an option to continuously rejoin channels the bot is not in. issue#647
changehost: added support for network-specific options. issue#611
changehost: listen for services account changes - this allows for consistent account based hostmasks for SASL gateways, etc.
relay_clientbot: rpm now deals with duplicate nicks and nicks including spaces (e.g. on Discord)
Relay now merges together network specific clientbot_styles options with global settings, instead of ignoring the latter if the network specific options are set. issue#642
ts6: add support for hiding PyLink servers ((H) in server description)
commands: various improvements to the showuser command

Bug fixes

More fixes for InspIRCd 3 support:
- Fix crash on receiving SVSTOPIC on InspIRCd 3
- Fix incorrect handling of PING to PyLink subservers - this caused harmless but confusing “high latency” warnings
inspircd: revert change disallowing _ in hosts; this has been enabled by default for quite some time
Fixed various edge cases in mode handling (+b-b ban cycles, casefolding mode arguments, etc.)
automode: add better handling for protocols where setting IRC modes isn’t possible
automode: disable on networks where IRC modes aren’t supported. issue#638

Internal improvements

Added test cases for shared protocol code (mode parsers, state checks, etc.)
Added more IRC parsing tests based off ircdocs/parser-tests
Add get_service_options method to merge together global & local network options. issue#642
Enhancements to UnrealIRCd protocol module:
- unreal: read supported user modes on link when available (UnrealIRCd 4.2.3 and later)
- unreal: stop sending NETINFO on link; this suppresses protocol version/network name mismatch warnings
- unreal: declare support for msgbypass and timedban extbans
Added new protocol capabilities: has-irc-modes, can-manage-bot-channels
relay: handle acting extbans for ban exceptions +e, which is supported by InspIRCd and UnrealIRCd

PyLink 2.1-alpha2 (2019-07-14)

PyLink now requires Python 3.5 or later!

This release includes all changes from PyLink 2.0.3, plus the following:

Feature changes

Added cachetools as a core runtime dependency (relay and expiringdict)
Added beta support for InspIRCd 3 (issue#644):
- The target IRCd version can be configured via a target_version server option, which supports insp20 (InspIRCd 2.0, default) and insp3.
Removed dependencies on ircmatch (issue#636) and expiringdict (issue#445)
Increased Passlib requirement to 1.7.0+ to remove deprecated calls
- pylink-mkpasswd: use hash() instead of encrypt()
Relay updates:
- Relay now tracks kill/mode/topic clashes and will stop relaying when it detects such a conflict (issue#23)
- Skip nick normalization on protocols where they aren’t actually required (Clientbot, Discord)
Support @servicenick as a fantasy trigger prefix (useful on Discord)
commands: add a shownet command to show server info (issue#578)
antispam: added optional quit/part message filtering (issue#617)

Bug fixes

SECURITY: only whitelist permissions for the defined login:user if a legacy account is enabled
clientbot: fix crash when MODES is defined in ISUPPORT without a value (affects connections to Oragono)
relay: fix KILL message formatting (regression from issue#520)
relay: consistency fixes when handling hideoper mode changes (issue#629)
exttargets: coerse services_account to string before matching (issue#639)

Internal improvements

API Break: Reworked PyLinkNetworkCore.nick_to_uid() specification to support duplicate nicks and user filtering
- Reworked most plugins (commands, bots, opercmds) to deal with duplicate nicks more robustly
Revised handling of KILL and QUIT hooks: the userdata argument is now always defined
- If we receive both a KILL and a QUIT for any client, only the one received first will be sent as a hook.
Added new protocol module capabilities: freeform-nicks, virtual-server
Added utils.match_text(), a general glob matching function to replace ircmatch calls (issue#636)
Editing hook payloads is now officially supported in plugin hook handlers (issue#452)
ClientbotWrapperProtocol: override _get_UID() to only return non-virtual clients, ensuring separate namespaces between internal and external clients.
ClientbotBaseProtocol: disallow part() from the main pseudoclient by default, as this may cause desyncs if not supported
Moved IRCv3 message tags parser from clientbot to ircs2s_common
Merged relay’s showchan, showuser commands into the commands plugin, for better tracking of errors and duplicate nicks

PyLink 2.1-alpha1 (2019-05-02)

This release focuses on internal improvements to better integrate with pylink-discord. It includes all fixes from 2.0.2, plus the following:

Feature changes

Various Relay improvements:
- Relay now sanitizes UTF-8 nicks and idents where not supported, optionally using the unidecode module to decode Unicode names more cleanly to ASCII
  - This introduces a new option relay::use_unidecode which is enabled by default when the module is installed
- The fallback character to replace invalid nick characters is now - instead of |
- Add protocol-level support for hiding users in Relay - this is used by pylink-discord to optionally hide invisible/offline users
Decrease default log file size from 50 MiB to 20 MiB

Bug fixes

changehost: only send a host change if new host != original
- This prevents duplicate host changes on InspIRCd, since it echoes back successful host changes
clientbot: fix /names parsing errors on networks supporting colors in hosts. issue#641
inspircd: disallow _ in hosts since CHGHOST does not treat it as valid
relay: allow trailing .’s in subserver names (e.g. relay. is now an accepted server suffix)
stats: hide login blocks in /stats O when not relevant to the caller’s network
unreal: work around a potential race when sending kills on join

Internal improvements

log: use pylinkirc as logger name; this prevents other libraries’ debug output from making it to the PyLink log by default
clientbot: properly bounce kicks on networks not implementing them
classes: remove channels, modes substitutions from User.get_fields()
various: type-safety fixes to support numeric channel, server, and user IDs (they were previously always strings)
SQUIT hooks now track a list of affected servers (SIDs) in the affected_servers field
relay: minor optimizations

PyLink 2.0.3 (2019-10-11)

Changes since 2.0.2:

Feature changes

Switch to more secure password hashing defaults, using pbkdf2-sha256 as the default hash method
Introduce a login::cryptcontext_settings option to further tweak passlib settings if desired

Bug fixes

SECURITY: Only allow the defined login:user to take all permissions when legacy accounts are enabled
clientbot: fix /names handling on networks with colours in hostnames
clientbot: fix crash when MODES is defined in ISUPPORT but given no value (affects connections to Oragono)
changehost: only send a host change if new host != original
relay: fix inconsistent handling of the hideoper setting. issue#629
unreal: work around a potential race when sending kills on join

PyLink 2.0.2 (2019-03-31)

Changes since 2.0.1:

Feature changes

Antispam now supports filtering away Unicode lookalike characters when processing text
Allow disabling dynamic channels via a new “join_empty_channels” option
relay: add an explicit forcetag command, since IRC kills are now relayed between networks

Bug fixes

launcher: fix crash when –no-pid is set
relay: fix DB corruption when editing modedelta modes
automode: fix sending joins to the wrong network when editing remote channels

Internal improvements

relay: minor optimizations and cleanup
Disable throttling on S2S links by default, since it usually isn’t necessary there

PyLink 2.0.1 (2018-10-06)

Changes since 2.0.0:

Feature changes

Slashes (/) in hosts is now supported on UnrealIRCd.
Added an ignore_ts_errors server option to suppress bogus TS warnings.

Bug fixes

clientbot: fix desync when the bot is told to kick itself (issue#377)
launcher: fix PID files not being read if psutil isn’t installed
relay_clientbot no longer relays list modes set during a server burst (issue#627)
Fixed stray “bogus TS 0” warnings on some UnrealIRCd mode commands

Internal improvements

unreal: bump protocol version to 4200 (UnrealIRCd 4.2.0)
unreal: use SJOIN in join() to work around non-deterministic TS when forwarding to other servers

PyLink 2.0.0 (2018-07-31)

Changes since 2.0-rc1:

Fixed various bugs affecting Relay and Clientbot:
- handlers: don’t delete the PyLink service UID if it leaves all cahnnels
- Relay sometimes sent an empty channel to kick() when relaying kills to kick
- Fix “Relay plugin unloaded” parts on Clientbot links causing a flood of “Clientbot was force parted” kicks
setup.py: Work around TypeError in distutils.util.rfc822_escape() when installing on Python 3.4

For a summary of changes since 1.3.x, consult the release notes for PyLink 2.0-rc1 below.

PyLink 2.0-rc1 (2018-07-18)

PyLink 2.0 comes with a ton of new features, refinements, and optimizations. Here is a summary of the most interesting changes - for detailed changelogs, consult the release notes for individual snapshots below.

This release does not preserve compatibility with third-party plugins written for PyLink 1.x!

New features

Added support for ngIRCd, ChatIRCd, and beware-ircd (via protocol modules ngircd, ts6, and p10 respectively)
Add support for extbans on UnrealIRCd, Charybdis (and derivatives), InspIRCd, and Nefarious.
U-lined services servers can now be configured for use with Relay:
- CLAIM restrictions are relaxed for service bots, which may now join with ops and set simple modes. This prevents mode floods when features such as DEFCON are enabled, and when a channel is accidentally registered on a network not on the CLAIM list.
- DEFCON modes set by services are ignored by Relay instead of bounced, and do not forward onto other networks unless the setting network is also in the channel’s CLAIM list.
- To keep the spirit of CLAIM, opped services not in a channel’s CLAIM list are still not allowed to kick remote users, set prefix modes (e.g. op) on others, or modify list modes such as bans.
New Antispam plugin, with the ability to kill / kick / block mass-highlight spam and configured “spam” strings.
Added TLS certificate verification, which is enabled by default on Clientbot networks. issue#592
- This adds the options ssl_validate_hostname and ssl_accept_invalid_certs options which have defaults as follows:
  - Server type ssl_validate_hostname ssl_accept_invalid_certs
    
    Full links (S2S) false (implied by ssl_accept_invalid_certs: true) true
    
    Clientbot networks (C2S) true false
  - ssl_validate_hostname determines whether a network’s TLS certificate will be checked for a matching hostname.
  - ssl_accept_invalid_certs disables certificate checking entirely when enabled, and also turns off ssl_validate_hostname.
  - The existing TLS certificate fingerprint options are unchanged and can be turned on and off regardless of these new options.
New Relay features:
- LINKACL now supports whitelisting networks in addition to the original blacklist implementation (see help LINKACL). issue#394
- Relay IP sharing now uses a pool-based configuration scheme (relay::ip_share_pools), deprecating the relay::show_ips and relay_no_ips options.
  - IPs and real hosts are shared bidirectionally between all networks in an ipshare pool, and masked as 0.0.0.0 when sending to a network not in a pool and when receiving those networks’ users.
- KILL handling received a major rework (issue#520:
  - Instead of always bouncing, kills to a relay client can now be forwarded between networks in a killshare pool (relay::kill_share_pools).
  - If the sender and target’s networks are not in a killshare pool, the kill is forwarded as a kick to all shared channels that the sender has CLAIM access on (e.g. when they are the home network, whitelisted in CLAIM, and/or an op).
- relay_clientbot now supports setting clientbot styles by network. issue#455
- The defaults for CLAIM (on or off) and LINKACL (whitelist or blacklist mode) can now be pre-configured for new channels. issue#581
- New relay::allow_free_oper_links option allows disabling oper access to CREATE/LINK/DELINK/DESTROY/CLAIM by default
- relay_clientbot: add support for showing prefix modes in relay text, via a new $mode_prefix expansion. issue#540
Clientbot is now more featureful:
- Added support for IRCv3 caps account-notify, account-tag, away-notify, chghost, extended-join, and userhost-in-names
- Clientbot now supports expansions such as $nick in autoperform.
- Configurable alternate / fallback nicks are now supported: look for the pylink_altnicks option in the example config.
- Added support for WHOX.
- Clientbot can now optionally sync ban lists when it joins a channel, allowing Relay modesync to unset bans properly. See the fetch_ban_lists option in the example config.
- Failed attempts to join channels are now logged to warning. issue#533
New commands for the opercmds plugin, including:
- chghost, chgident, and chgname, for IRCds that don’t expose them as commands.
- massban, masskill, massbanre, and masskillre, which allow setting mass bans/kills/G/KLINEs on users matching a nick!user@host mask, exttarget, or regular expression. The hope is that these tools can help opers actively fight botnets as they are connected, similar to atheme’s clearchan and Anope’s chankill commands.
- checkban and checkbanre, which return the users matching a target
Messages sent by most commands are now transparently word-wrapped to prevent cutoff. issue#153
PyLink accounts are now implicitly matched: i.e. user1 is now equivalent to $pylinkacc:user1.
PyLink now responds to remote /STATS requests (/stats c, u, and o) if the stats plugin is loaded.
The PyLink service client no longer needs to be in channels to log to them.

Server type	`ssl_validate_hostname`	`ssl_accept_invalid_certs`
Full links (S2S)	false (implied by `ssl_accept_invalid_certs: true`)	true
Clientbot networks (C2S)	true	false

Feature changes

The ratbox protocol module has been merged into ts6, with a new ircd: ratbox option introduced to declare Ratbox as the target IRCd. issue#543
The raw command has been split into a new plugin (plugins/raw.py) with two permissions: raw.raw for Clientbot networks, and raw.raw.unsupported_network for other protocols. Using raw commands outside Clientbot is not supported. issue#565
Some options were deprecated and renamed:
- The p10_ircd option for P10 servers is now named ircd, though the old option will still be read from.
- The use_elemental_modes setting on ts6 networks has been deprecated and replaced with an ircd option targeting charybdis, elemental-ircd, or chatircd. Supported values for ircd include charybdis, elemental, and chatircd.
The fml command in the games plugin was removed.

Bug fixes

clientbot: fix errors when connecting to networks with mixed-case server names (e.g. AfterNET)
Fix irc.parse_modes() incorrectly mangling modes changes like +b-b *!*@test.host *!*@test.host into +b *!*@test.host. issue#573
clientbot: fixed sending duplicate JOIN hooks and AWAY status updates. issue#551

Internal improvements

Reading from sockets now uses a select-based backend instead of one thread per network.
Major optimizations to user tracking that lets PyLink handle Relay networks of 500+ users.
- This is done via a new UserMapping class in pylinkirc.classes, which stores User objects by UID and provides a bynick attribute mapping case-normalized nicks to lists of UIDs.
- classes.User.nick is now a property, where the setter implicitly updates the bynick index with a pre-computed case-normalized version of the nick (also stored to User.lower_nick)
Service bot handling was completely redone to minimize desyncs when mixing Relay and services. issue#265

Changes in this RC build

From 2.0-beta1:

Bug fixes

relay: CHANDESC permissions are now given to opers if the relay::allow_free_oper_links option is true.
Relay no longer forwards kills from servers, preventing extraneous kills for nick collisions and the like.
bots: the join command now correctly uses bots.join as its permission name (keeping it consistent with the command name).
- The previous name bots.joinclient is still supported for compatibility reasons.

Documentation updates

Rewrote the Relay Quick Start Guide. issue#619
FAQ: expanded Relay section with common questions regarding Relay mechanics (i.e. kill, mode, and server bans handling)
docs/technical, docs/permissions-reference: many updates to bring up to date with PyLink 2.0
various: updated the GitHub repository address

PyLink 2.0-beta1 (2018-06-27)

This release contains all changes from 2.0-alpha3 as well as the following:

New features

Added TLS certificate verification, which is now enabled by default on Clientbot networks. issue#592
- This adds the options ssl_validate_hostname and ssl_accept_invalid_certs options which have defaults as follows:
  - Server type ssl_validate_hostname ssl_accept_invalid_certs
    
    Full links (S2S) false (implied by ssl_accept_invalid_certs: true) true
    
    Clientbot networks (C2S) true false
  - ssl_validate_hostname determines whether a network’s TLS certificate will be checked for a matching hostname.
  - ssl_accept_invalid_certs disables certificate checking entirely when enabled, and also turns off ssl_validate_hostname.
  - The existing TLS certificate fingerprint options are unchanged by this and can be turned on and off regardless of these new options.
New Relay features:
- LINKACL now supports whitelisting networks in addition to the original blacklist implementation (see help LINKACL). issue#394
- relay: The defaults for CLAIM (on or off) and LINKACL (whitelist or blacklist mode) can now be pre-configured for new channels. issue#581
- You can now set descriptions for channels in LINKED via the CHANDESC command. issue#576
- relay_clientbot now supports setting clientbot styles by network. issue#455
- New relay::allow_free_oper_links option allows disabling oper access to CREATE/LINK/DELINK/DESTROY/CLAIM by default
New Antispam features (see the antispam: example block for configuration details):
- Antispam now supports text filtering with configured bad strings. issue#359
- Added block as a punishment to only hide messages from other plugins like relay. issue#616
- Antispam can now process PMs to PyLink clients for spam - this can be limited to service bots, enabled for all PyLink clients (including relay clones), or disabled entirely (the default).
- IRC formatting (bold, underline, colors, etc.) is now removed before processing text. issue#615
IPv4/IPv6 address selection is now automatic, detecting when an IPv6 address or bindhost is given. issue#212
Messages sent by most commands are now transparently word-wrapped to prevent cutoff. issue#153
The Global plugin now supports configuring exempt channels. issue#453
Automode now allows removing entries by entry numbers. issue#506

Server type	`ssl_validate_hostname`	`ssl_accept_invalid_certs`
Full links (S2S)	false (implied by `ssl_accept_invalid_certs: true`)	true
Clientbot networks (C2S)	true	false

Feature changes

Relay feature changes:
- Relay IP sharing now uses a pool-based configuration scheme (relay::ip_share_pools), deprecating the relay::show_ips and relay_no_ips options.
  - IPs and real hosts are shared bidirectionally between all networks in an ipshare pool, and masked as 0.0.0.0 when sending to a network not in a pool and when receiving those networks’ users.
- KILL handling received a major rework (issue#520:
  - Instead of always bouncing, kills to a relay client can now be forwarded between networks in a killshare pool (relay::kill_share_pools).
  - If the sender and target’s networks are not in a killshare pool, the kill is forwarded as a kick to all shared channels that the sender has CLAIM access on (e.g. when they are the home network, whitelisted in CLAIM, and/or an op).
The PyLink service client no longer needs to be in channels to log to them.

Bug fixes

Fixed ping timeout handling (this was broken sometime during the port to select).
relay: block networks not on the claim list from merging in modes when relinking (better support for modes set by e.g. services DEFCON).
Reworked relay+clientbot op checks on to be more consistent.
inspircd: fix potential desyncs when sending a kill by removing the target immediately. issue#607
UserMapping: fixed a missing reference to the parent irc instance causing errors on nick collisions.
clientbot: suppress warnings if /mode #channel doesn’t show arguments to +lk, etc. issue#537
Relay now removes service persistent channels on unload, and when the home network for a link disconnects.
relay: raise an error when trying to delink a leaf channel from another leaf network.
- Previously this would (confusingly) delink the channel from the network the command was called on instead of the intended target.
opercmds: forbid killing the main PyLink client.

Internal changes

Login handling was rewritten and moved entirely from coremods.corecommands to coremods.login. issue#590
New stuff for the core network classes:
- is_privileged_service(entityid) returns whether the given UID or SID belongs to a privileged service (IRC U:line).
- User, Channel TS values are now consistently stored as int. issue#594
- match_host() was split into match_host() and match_text(); the latter is now preferred as a simple text matcher for IRC-style globs.
New stuff in utils:
- remove_range() removes a range string of (one-indexed) items from the list, where range strings are indices or ranges of them joined together with a “,” (e.g. “5”, “2”, “2-10”, “1,3,5-8”) - issue#506
- get_hostname_type() takes in an IP or hostname and returns an int representing the detected address type: 0 (none detected), 1 (IPv4), 2 (IPv6) - issue#212
- parse_duration() takes in a duration string (in the form 1w2d3h4m5s, etc.) and returns the equiv. amount of seconds - issue#504
The TLS/SSL setup bits in IRCNetwork were broken into multiple functions: _make_ssl_context(), _setup_ssl, and _verify_ssl()
Removed deprecated attributes: irc.botdata, irc.conf, utils.is* methods, PyLinkNetworkCoreWithUtils.check_authenticated() - issue#422
PyLinkNCWUtils: The allowAuthed, allowOper options in is_oper() are now deprecated no-ops (they are set to False and True respectively)

PyLink 2.0-alpha3 (2018-05-10)

This release contains all changes from 1.3.0, as well as the following:

New features

Experimental daemonization support via pylink -d. issue#187
New (alpha-quality) antispam plugin targeting mass-highlight spam: it supports any combination of kick, ban, quiet (mute), and kill as punishment. issue#359
Clientbot now supports expansions such as $nick in autoperform.
Relay now translates STATUSMSG messages (e.g. @#channel messages) for target networks instead of passing them on as-is. issue#570
Relay endburst delay on InspIRCd networks is now configurable via the servers::NETNAME::relay_endburst_delay option.
The servermaps plugin now shows the uplink server name for Clientbot links
Added --trace / -t options to the launcher for integration with Python’s trace module.

Feature changes

Reverted the commit making SIGHUP shutdown the PyLink daemon. Now, SIGUSR1 and SIGHUP both trigger a rehash, while SIGTERM triggers a shutdown.
The raw command has been split into a new plugin (plugins/raw.py) with two permissions: raw.raw for Clientbot networks, and raw.raw.unsupported_network for other protocols. Using raw commands outside Clientbot is not supported. issue#565
The servermaps plugin now uses two permissions for map and localmap: servermaps.map and servermaps.localmap respectively
showuser and showchan now consistently report times in UTC

Bug fixes

protocols/clientbot: fix errors when connecting to networks with mixed-case server names (e.g. AfterNET)
relay: fix KeyError when a local client is kicked from a claimed channel. issue#572
Fix irc.parse_modes() incorrectly mangling modes changes like +b-b *!*@test.host *!*@test.host into +b *!*@test.host. issue#573
automode: fix handling of channels with multiple #’s in them
launcher: prevent protocol module loading errors (e.g. non-existent protocol module) from blocking the setup of other networks.
- This fixes a side-effect which can cause relay to stop functioning (world.started is never set)
relay_clientbot: fix STATUSMSG (@#channel) notices from being relayed to channels that it shouldn’t
Fixed various 2.0-alpha2 regressions:
- Relay now relays service client messages as PRIVMSG and P10 WALL* commands as NOTICE
- protocols/inspircd: fix supported modules list being corrupted when an indirectly linked server shuts down. issue#567
networks: remote now properly errors if the target service is not available on a network. issue#554
commands: fix showchan displaying status prefixes in reverse
stats: route permission error replies to notice instead of PRIVMSG
- This prevents “Unknown command” flood loops with services which poll /stats on link.
clientbot: fixed sending duplicate JOIN hooks and AWAY status updates. issue#551

Internal improvements

Reading from sockets now uses select instead of one thread per network.
- This new code uses the Python selectors module, which automatically chooses the fastest polling backend available (epoll|kqueue|devpoll > poll > select).
API Break: significantly reworked channel handling for service bots. issue#265
- The ServiceBot.extra_channels attribute in previous versions is replaced with ServiceBot.dynamic_channels, which is accessed indirectly via new functions ServiceBot.add_persistent_channel(), ServiceBot.remove_persistent_channel(), ServiceBot.get_persistent_channels(). This API also replaces ServiceBot.join() for most plugins, which now joins channels non-persistently.
- This API change provides plugins with a way of registering dynamic persistent channels, which are consistently rejoined on kick or kill.
- Persistent channels are also “dynamic” in the sense that PyLink service bots will now part channels marked persistent when they become empty, and rejoin when it is recreated.
- This new implementation is also plugin specific, as plugins must provide a namespace (usually the plugin name) when managing persistent channels using ServiceBot.(add|remove)_persistent_channel().
- New abstraction: ServiceBot.get_persistent_channels() which fetches the list of all persistent channels on a network (i.e. both the config defined channels and what’s registered in dynamic_channels).
- New abstraction: ServiceBot.part() sends a part request to channels and only succeeds if it is not marked persistent by any plugin. This effectively works around the long-standing issue of relay-services conflicts. issue#265
Major optimizations to irc.nick_to_uid: PyLinkNetworkCore.users and classes.User now transparently maintain an index mapping nicks to UIDs instead of doing reverse lookup on every call.
- This is done via a new UserMapping class in pylinkirc.classes, which stores User objects by UID and provides a bynick attribute mapping case-normalized nicks to lists of UIDs.
- classes.User.nick is now a property, where the setter implicitly updates the bynick index with a pre-computed case-normalized version of the nick (also stored to User.lower_nick)
Various relay optimizations: reuse target SID when bursting joins, and only look up nick once in normalize_nick
Rewritten CTCP plugin, now extending to all service bots. issue#468, issue#407
Relay no longer spams configured U-lines with “message dropped because you aren’t in a common channel” errors
The endburst_delay option to spawn_server() was removed from the protocol spec, and replaced by a private API used by protocols/inspircd and relay.
New API: hook handlers can now filter messages from lower-priority handlers by returning False. issue#547
New API: added irc.get_server_option() to fetch server-specific config variables and global settings as a fallback. issue#574
automode: replace assert checks with proper exceptions
Renamed methods in log, utils, conf to snake case. issue#523
Remove structures.DeprecatedAttributesObject; it’s vastly inefficient for what it accomplishes
clientbot: removed unreliable pre-/WHO join bursting with userhost-in-names
API change: kick and kill command funcitons now raise NotImplementedError when not supported by a protocol
relay, utils: remove remaining references to deprecated irc.proto

PyLink 2.0-alpha2 (2018-01-16)

This release includes all changes from 1.2.2-dev, plus the following:

New features

relay_clientbot: add support for showing prefix modes in relay text, via a new $mode_prefix expansion. issue#540
Added new modedelta feature to Relay:
- Modedelta allows specifying a list of (named) modes to only apply on leaf channels, which can be helpful to fight spam if leaf networks don’t have adequate spam protection.
relay: added new option server::<networkname>:relay_forcetag_nicks, a per-network list of nick globs to always tag when introducing users onto a network. issue#564
Added support for more channel modes in Relay:
- blockcaps: inspircd +B, elemental-ircd +G
- exemptchanops: inspircd +X
- filter: inspircd +g, unreal extban ~T:block (issue#557)
- hidequits: nefarious +Q, snircd +u
- history: inspircd +H
- largebanlist: ts6 +L
- noamsg: snircd/nefarious +T
- blockhighlight: inspircd +V (extras module)
- kicknorejoin: elemental-ircd +J (issue#559)
- kicknorejoin_insp: inspircd +J (with argument; issue#559)
- repeat: elemental-ircd +E (issue#559)
- repeat_insp: inspircd +K (with argument; issue#559)
Added support for UnrealIRCd extban ~T in Relay. issue#557
p10: added proper support for STATUSMSG notices (i.e. messages to @#channel and the like) via WALLCHOPS/WALLHOPS/WALLVOICES
p10: added outgoing /knock support by sending it as a notice
ts6: added incoming /knock handling
relay: added support for relaying /knock

Backwards incompatible changes

The ratbox protocol module has been merged into ts6, with a new ircd: ratbox option introduced to declare Ratbox as the target IRCd. issue#543

Bug fixes

Fix default permissions not applying on startup (2.0-alpha1 regression). issue#542
Fix rejoin-on-kill for the main PyLink bot not working (2.0-alpha1/94e05a6 regression).
Clientbot fixes:
- Fix desyncs caused by incomplete nick collision checking when a user on a Clientbot link changes their nick to match an existing virtual client. issue#535
- Fix desync involving ghost users when a person leaves a channel, changes their nick, and rejoins. issue#536
- Treat 0 as “no account” when parsing WHOX responses; this fixes incorrect “X is logged in as 0” output on WHOIS.
protocols/p10: fix the use_hashed_cloaks server option not being effective.
Fix long standing issues where relay would sometimes burst users multiple times on connect. issue#529
- Also fix a regression from 2.0-alpha1 where users would not be joined if the hub link is down (issue#548)
Fix $a:account extbans being dropped by relay (they were being confused with $a). issue#560
Fix corrupt arguments when mixing the remote and mode commands. issue#538
Fix lingering queue threads when networks disconnect. issue#558
The relay and global plugins now better handle empty / poorly formed config blocks.
bots: don’t allow spawnclient on protocol modules with virtual clients (e.g. clientbot)
bots: fix KeyError when trying to join previously nonexistent channels

Internal improvements

Channel.sort_prefixes() now consistently sorts modes from highest to lowest (i.e. from owner to voice). Also removed workaround code added to deal with the wonkiness of this function.
ircs2s_common: add handling for nick@servername messages.
IRCNetwork should no longer send multiple disconnect hooks for one disconnection.
protocols/ts6 no longer requires SAVE support from the uplink. issue#545
ts6, hybrid: miscellaneous cleanup
protocols/inspircd now tracks module (un)loads for m_chghost.so and friends. issue#555
Clientbot now logs failed attempts in joining channels. issue#533

PyLink 2.0-alpha1 (2017-10-07)

The “Eclectic” release. This release includes all changes from 1.2.1, plus the following:

New features

Login blocks can now be limited by network, user hostname, and IRCop status: see the new “require_oper”, “hosts”, and “networks” options in the example config.
Added support for ngIRCd, ChatIRCd, and beware-ircd (via protocol modules ngircd, ts6, p10 respectively)
Add support for extbans in protocols and relay: this is supported on UnrealIRCd, Charybdis (and derivatives), InspIRCd, and Nefarious P10.
- Yes, this means you can finally mute bothersome relay users.
Clientbot is now more featureful:
- Added support for IRCv3 caps account-notify, account-tag, away-notify, chghost, extended-join, and userhost-in-names
- Configurable alternate / fallback nicks are now supported: look for the pylink_altnicks option in the example config.
- Added support for WHOX, to complement IRCv3 account-notify and account-tag.
- Relay_clientbot can now relay mode changes as text.
- Clientbot can now optionally sync ban lists when it joins a channel, allowing Relay modesync to unset bans properly. See the fetch_ban_lists option in the example config.
PyLink received a new launcher, which now checks for stale PID files (when psutil is installed) and supports shutdown/restart/rehash via the command line.
New commands for the opercmds plugin, including:
- chghost, chgident, and chgname, for IRCds that don’t expose them as commands.
- massban, masskill, massbanre, and masskillre - these commands allow setting kickbans, kills, or glines on users matching a PyLink mask (n!u@h mask/exttarget) or regular expression. The hope is that these tools can help opers actively fight botnets as they are connected, similar to atheme’s clearchan and Anope’s chankill commands.
- checkbanre - a companion to checkban, using regex matching
Better support for (pre-defined) U-lined services servers in relay:
- CLAIM restrictions are relaxed for service bots, which may now join with ops and set simple modes. This prevents mode floods when features such as DEFCON are enabled, and when a channel is accidentally registered on a network not on the CLAIM list.
- DEFCON modes set by services are ignored by Relay instead of bounced, and do not forward onto other networks unless the setting network is also in the channel’s CLAIM list.
- To keep the spirit of CLAIM alive, opped services not in a channel’s CLAIM list are still not allowed to kick remote users, set prefix modes (e.g. op) on others, or set list modes such as bans.
Service bots’ hostnames and real names are now fully configurable, globally and per network.
Added per-network configuration of relay server suffixes.
Added IRC /STATS support via the stats plugin (/stats c, u, and o are supported so far)
PyLink’s connection time is now displayed when WHOISing service bots. This info can be turned off using the pylink:whois_show_startup_time option.
More specific permissions for the remote command, which now allows assigning permissions by target network, service bot, and command.
New $service exttarget which matches service bots by name.

Backwards incompatible changes

Signal handling on Unix was updated to use SIGUSR1 for rehash and SIGHUP for shutdown - this changes PyLink to be more in line with foreground programs, which generally close with the owning terminal.
Some options were deprecated and renamed:
- The p10_ircd option for P10 servers is now named ircd, though the old option will still be read from.
- The use_elemental_modes setting on ts6 networks has been deprecated and replaced with an ircd option targeting charybdis, elemental-ircd, or chatircd. Supported values for ircd include charybdis, elemental, and chatircd.
PID file checking is now enabled by default, along with checks for stale PID files only when psutil is installed. Users upgrading from PyLink < 1.1-dev without psutil installed will need remove PyLink’s PID files before starting the service.
The fml command in the games plugin was removed.

Bug fixes

Relay should stop bursting channels multiple times on startup now. (initialize_channel now skips execution if another thread is currently initializing the same channel)
Fixed a long standing bug where fantasy responses would relay before a user’s original command if the fantasy plugin was loaded before relay. (Bug #123)

Internal changes

API Break: The protocol module layer is completely rewritten, with the Irc and Protocol-derived classes combining into one. Porting will be needed for old protocol modules and plugins targetting 1.x; see the new (WIP) protocol specification for details.
API Break: Channels are now stored in two linked dictionaries per IRC object: once in irc._channels, and again in irc.channels. The main difference is that irc._channels implicitly creates new channels when accessing them if they didn’t previously exist (prefer this for protocol modules), while irc.channels does not raises and raises KeyError instead (prefer this for plugins).
API Break: Most methods in utils and classes were renamed from camel case to snake case. log, conf, and others will be ported too before the final 2.0 release.
API Break: IRC protocol modules’ server introductions must now use post_connect() instead of connect() to prevent name collisions with the base connection handling code.
Channels are now stored case insensitively internally, so protocol modules and new plugins no longer need to manually coerse names to lowercase.
Plugins can now bind hooks as specific priorities via an optional priority option in utils.add_hook. Hooks with higher priorities will be called first; the default priority value us 500.
Commands can now be properly marked as aliases, so that duplicates don’t show in the list command.
Added basic GLINE/KLINE support for most IRCds; work is ongoing to polish this off.
PyLink accounts are now implicitly matched: i.e. user1 is now equivalent to $pylinkacc:user1
Added complete support for “Network Administrator” and “Network Service” as oper types on IRCds using user modes to denote them (e.g. UnrealIRCd, charybdis).
User and server hop counts are now tracked properly instead of being hardcoded as 1.
protocols/p10 now bursts IPv6 IPs to supported uplinks.
Fixed compatibility with ircd-hybrid trunk after commit 981c61e (EX and IE are no longer sent in the capability list)

PyLink 1.3.0 (2018-05-08)

The 1.3 update focuses on backporting some commonly requested and useful features from the WIP 2.0 branch. This release includes all changes from 1.3-beta1, plus the following:

Errors due to missing permissions now log to warning. issue#593
Documentation updates to advanced-relay-config.md and the FAQ

PyLink 1.3-beta1 (2018-04-07)

The 1.3 update focuses on backporting some commonly requested and useful features from the WIP 2.0 branch. This beta release includes all changes from 1.2.1, plus the following:

New features

Backported the launcher from 2.0-alpha2:
- Added support for daemonization via the --daemon/-d option. issue#187
- Added support for shutdown/restart/rehash via the command line. issue#244
- The launcher now detects and removes stale PID files when psutil (an optional dependency) is installed, making restarting from crashes a more streamlined process. issue#512
- PID file checking is now enabled by default, with the --check-pid/-c option retained as a no-op option for compatibility with PyLink <= 1.2
- Following 2.0 changes, sending SIGUSR1 to the PyLink daemon now triggers a rehash (along with SIGHUP).
Service bot idents, hosts, and realnames can now be configured globally and on a per-network basis. issue#281
Relay server suffix is now configurable by network (servers::<netname>::relay_server_suffix option). issue#462
Login blocks can now be restricted to specific networks, opered users, and hostmasks. issue#502
Relay now supports relaying more channel modes, including inspircd blockhighlight +V and exemptchanops +X (the whitelist was synced with 2.0-alpha3)

Bug fixes

automode: fix errors when managing channels with multiple #’s in its name
protocols/p10: fix the use_hashed_cloaks option not working correctly (it mistakenly read the value of use_account_cloaks instead)
relay_clientbot: fix @#channel messages being relayed to channels other than the target
Fixed sporadic disconnect issues on BlockingIOError, ssl.SSLWantReadError, and ssl.SSLWantWriteError
protocols/unreal: fix the wrong hook name being sent when receiving legacy (Unreal 3.2) user introductions
global: ignore empty global: configuration blocks

Misc changes

Config loading now uses yaml.safe_load() instead of yaml.load() so that arbitrary code cannot be executed. issue#589
Significantly revised example-conf for wording and consistency.
protocols/unreal: bumped protocol version to 4017 (no changes needed)

PyLink 1.2.1 (2017-09-19)

The “Dancer” release. Changes from 1.2.0:

Bug fixes

unreal: fix TypeError when relaying prefix modes via mode()
Fix wrong database and PID filenames if the config file name includes a period (“.”)
automode: don’t send empty mode lines if no users match the ACL
networks: check in “remote” that the remote network is actually connected
Fix commonly reported crashes on logging: config syntax errors (49136d5)
Backported fixes from 2.0-dev:
- p10: fix wrong hook name for user introduction
- clientbot: warn when an outgoing message is blocked (e.g. due to bans) (#497)
- ts6: fix setting real host of users to ‘None’ if it wasn’t given

Misc changes

Removed incorrect descriptions regarding P10 extended_accounts. Both X3 and atheme support extended accounts, and this needs to match your IRCd settings regardless.
Updated definitions in channel/user-modes.csv.

Internal improvements

Backported improvements from 2.0-dev:
- Fix support for Hybrid 8.x trunk
- Minor logging cleanup for relay and Irc.matchHost().
- Fix cmode +p mapping on TS6 networks.

PyLink 1.2.0 (2017-08-14)

The “Dragons” release. Changes since 1.2.0-rc1:

Feature changes

Make relay nick tagging configurable per-network; backported from 2.0-dev (#494)

Bug fixes

Fix extraneous removal of PID files even when -n/--no-check-pid was set or if the PID file already existed on launch (PyLink would quit and delete the old PID file in these cases)
servprotect: bump default threshold up to 10 hits/10 seconds, as the old limit was too prone to false positives
Fix extraneous queue threads not being stopped when a network disconnects (0d5afd2)
Fix relay errors on disconnect due to race conditions in network handling (a0a295f)

Misc changes

Updated example config and FAQ.

For a summary of major changes since 1.1.x, see the changelog for 1.2.0-rc1.

PyLink 1.2.0-rc1

The “Droplet” release. Changes since 1.2-beta1:

Bug fixes

relay: fix channel claim disabling (i.e. “CLAIM #channel -” was broken since 1.2-alpha1)
IRCS2SProtocol: fix UnboundLocalError in “message coming from wrong way” error
ts6: fix parsing of the INVITE command’s ts argument
automode: fix formatting and examples in setacc help text
p10: fix rejoin-on-kick relaying by also acknowledging kicks sent from PyLink to its clients with a PART

Major changes since 1.1.x

Added support for snircd, ircu, and other (generic) P10 variants. The target IRCd can be chosen using the new server-specific p10_ircd option; see the example config for details (#330).
The nefarious protocol module was renamed to p10, as it is no longer Nefarious-specific. You should update your configuration to use the new name!
Certain configuration options were renamed / deprecated:
- The bot: configuration block was renamed to pylink:, with the old name now deprecated.
- logging:stdout is now logging:console (the previous name was a misnomer since text actually went to stderr).
- The bot:prefix option is deprecated: you should instead define the prefixes setting in a separate config block for each service you wish to customize (e.g. set automode:prefix and games:prefix)
Using new-style accounts exclusively (i.e. specifying things under login:accounts) now requires a permissions: block for PyLink to start (#413).
New stats (uptime info) and global (global announcement) plugins.
Plugins and protocol modules can now be loaded from any directory, using the new plugin_dirs and protocol_dirs options. (#350)
- The pylink-contribdl utility was dropped as it is now it obsolete.
Relay message formatting became more flexible, and messages from servers (e.g. spurious invite announcements) can now be dropped: look for the relay_weird_senders and accept_weird_senders options.
Relay now forbids linking to channels where the home network is down, which previously caused errors due to unreliable target TS (#419). This, along with the regular TS check, can be overridden with a new link --force option.
The remote command now routes replies back to the caller network, and supports service bots that aren’t the main PyLink bot via a --service option.
Service bot spawning can now be disabled via the global spawn_services and per-service spawn_service options; doing so will merge the relevant commands into the main PyLink bot.
Added a pylink::show_unknown_commands option to optionally disable “unknown command” errors. This option can also be overridden per-server and per-service (#441).
Added a pylink::prefer_private_replies option to default to private command replies (#409).
Relay can now announce to leaf channels when the home network disconnects; see the relay::disconnect_announcement option (#421).

For a full list of changes since 1.1.x, consult the changelogs for the 1.2.x beta and alpha releases below.

PyLink 1.2-beta1

The “Dynamo” release. This release includes all fixes from 1.1.2, plus the following:

Feature changes

Added configurable encoding support via the encoding option in server config blocks (#467).
Certain configuration options were renamed / deprecated:
- The bot: configuration block was renamed to pylink:, with the old name now deprecated.
- logging:stdout is now logging:console (the previous name was a misnomer since text actually went to stderr).
- The bot:prefix option is deprecated: you should instead define the prefixes setting in a separate config block for each service you wish to customize (e.g. set automode:prefix and games:prefix)
Added new $and and $network exttargets - see the new exttargets documentation page for how to use them.
Hostmasks can now be negated in ban matching: e.g. !*!*@localhost now works. Previously, this negation was limited to exttargets only.
relay_clientbot no longer colours network names by default. It is still possible to restore the old behaviour by defining custom clientbot styles.
relay_clientbot no longer uses dark blue as a random colour choice, as it is difficult to read on clients with dark backgrounds.

Bug fixes

Fix service respawn on KILL not working at all - this was likely broken for a while but never noticed…
Fix kick-on-rejoin not working on P10 IRCds when joinmodes is set. (a.k.a. acknowledge incoming KICKs with a PART per the P10 specification)
servprotect: only track kills and saves to PyLink clients, not all kills on a network!
Fix ~#channel prefix messages not working over relay on RFC1459-casemapping networks (#464).
Show errors when trying to use showchan on a secret channel in the same way as actually non-existent channels. Previously this error response forced replies as a private notice, potentially leaking the existence of secret/private channels.
example-conf: fix reversed description for the password encryption setting.

Internal changes

Portions of the IRC/relay stack were refactored to prevent various hangs on shutdown.
Performance improvements for outgoing message queuing: the queue system now blocks when no messages are in the queue instead of polling it multiple times a minute.
Logging fixes: startup warnings (e.g. from config deprecations) now log to files as well as the console.

PyLink 1.2-alpha1

The “Darkness” release. This release includes all fixes from 1.1.2, plus the following summary of changes:

Feature changes

Added support for snircd, ircu, and other (generic) P10 variants. The target IRCd can be chosen using the new server-specific p10_ircd option; see the example config for details (#330).
The nefarious protocol module was renamed to p10 - you should update your configuration to use the new name!
Plugins and protocol modules can now be loaded from any directory, making pylink-contrib 20% more useful! Look for the plugin_dirs and protocol_dirs options in the example config. (#350)
- The pylink-contribdl utility was dropped as this makes it obsolete.
Relay now forbids linking to channels where the home network is down, which previously caused errors due to unreliable target TS (#419). This, along with the regular TS check, can be overridden with a new link --force option.
SASL timeout for clientbot is now configurable, with the default raised to 15 seconds
New-style accounts (i.e. anything under login:accounts) now require a permissions: block for PyLink to start (#413).
New stats (uptime info) and global (global announcement) plugins
Improvements to the remote command of the networks plugin:
- Plugin replies are now routed back to the sender’s network.
- Added an optional --service option to call commands for service bots other than the main PyLink service.
servprotect KILL/SAVE limits and expiry time are now configurable (#417)
Added the pylink::show_unknown_commands option to optionally disable “unknown command” errors. This option can also be overridden per-server and per-service (#441).
Added the pylink::prefer_private_replies option to default to private command replies (#409)
Relay message formatting became more flexible, and messages from user-less senders can now be dropped (fa30d3c c03f2d7)
Added global and per-service spawn_service(s) options to optionally disable service bot spawning
The bots plugin now allows specifying channel prefixes (e.g. @+) in join
exec: Added iexec, ieval, peval, pieval: i* commands run code in an isolated, persistent local scope, while p* commands evaluate expressions while pretty-printing the output
Relay: implement optional network disconnect announcements (see the relay::disconnect_announcement option; #421)

Bug fixes

Service bots no longer throw errors when attempting to call empty commands via fantasy.
Protocol modules now send PONG immediately instead of queuing it, which should prevent ping timeouts at times of very high activity.

Internal improvements

Protocols now verify that incoming messages originate from the right direction (#405)
Irc.matchHost now supports matching CIDR ranges (#411)
Added an utils.IRCParser class based off argparse, for flexible argument parsing (#6).
Rewrote outgoing message queues to use queue.Queue (#430), and support a limit to the amount of queued lines (#442)
- Also, added a clearqueue command to force clear the queue on a network.
PyLink protocol capabilities were introduced, reducing the amount of protocol name hardcoding in plugins (#337)
Service bots no longer create stubs on Clientbot networks, and instead route replies through the main bot (#403)
The default throttle time was halved from 0.01s to 0.005s.
ServiceBot is now more flexible in help formatting, fixing indented lines and consecutive newlines not showing on IRC.
Configuration validation no longer uses skippable asserts (#414)
inspircd: better support for OPERTYPE on InspIRCd 3.x
Clientbot now tracks channel modes and channel TS on join.
Clientbot now generates PUIDs/PSIDs with the nick or server name as prefix, and checks to make sure incoming senders don’t clash with one.
commands: showchan now shows TS on connections without the has-ts protocol capability as well, even though this value may be unreliable

Misc changes

The bot: config block is renamed to pylink:. Existing configurations will still work, as the bot and pylink blocks are always merged together (#343).
Added better documentation for generic options available to all service bots (nick, ident, prefix for fantasy, etc.)
Irc.botdata, Irc.conf, Irc.checkAuthenticated() have been deprecated: use conf.conf['pylink'], conf.conf, and the permissions API respectively instead!

PyLink 1.1.2

The “Calamari” release.

Bug fixes

Multiple fixes for the unreal protocol module when using UnrealIRCd 3.2 links:
- fccec3a Fix crashes on processing SJOIN when a user behind a 3.2 server has a nick starting with a symbol
- 8465edd Fix kicks to Unreal 3.2 users (PUIDs) not updating the internal state - this would’ve caused odd prefix mode desyncs if a user was kicked and rejoined.
- df4acbf Fix prefix modes not being set on Unreal 3.2 users (affects Automode, etc.)
Backported SASL fixes from 1.2-dev:
- b14ea4f Send CAP LS before NICK/USER so that we consistently get a SASL response before connect - this fixes SASL on networks like freenode, where connections can often complete before a SASL response from services is ever received.
- 84448e9 22ceb3f The above commit rewrites SASL to depend on a timely response from the server, so a configurable timeout for SASL/CAP is also introduced. (#424)

Feature changes

22ceb3f Added the sasl_timeout option for Clientbot networks (this defaults to 15 seconds if not set).

Internal improvements

Backported stability improvements from 1.2-dev:
- d70ca9f Rewrite connection error handling to include RuntimeError and SystemExit (#438)

PyLink 1.1.1

The “Crush” release. Changes from 1.1.0:

Bug fixes

The pylink-mkpasswd program is actually installed now when using pip (PyPI) or setup.py.
Backported protocol module fixes from 1.2-dev:
- unreal: fix crashes when receiving SJOIN with only a prefix and no UID
- inspircd: work around extraneous letters sent in FJOIN timestamps (Anope 1.8.x bug)
- nefarious: fix a typo causing crashes on user mode changes
Relay: in claim, show a less ambiguous error when a relay channel doesn’t exist on the caller’s network.
corecommands: removed extraneous irc.checkAuthenticated() call

Feature changes

pylink-mkpasswd now supports interactive password input via getpass, which is more secure than passing passwords raw on the command line.

Misc changes

More prominent migration notes regarding permissions and new accounts system.

PyLink 1.1.0

The “Calico” release. This is mostly a cleanup and documentation update from 1.1-beta2, with the following additional change: - Made passlib an optional dependency (password hashing will be disabled if passlib isn’t installed), simplifying the upgrade process.

For a full list of changes since 1.0.x, see the release notes for the 1.1 alpha & beta series. Summary of major changes since 1.0.x:

🔐 Redone authentication configuration, now supporting multiple accounts, hashed passwords, and fine-tuned permissions.
- Old configurations using login:user and login:password will still work, but are now deprecated. Consider migrating to the new login: block in the example config.
- This also adds a new optional dependency of passlib (https://passlib.readthedocs.io/en/stable/), which is required for the password hashing portion.
Protocol modules now wrap long messages (SJOIN and MODE) to prevent cutoff shenanigans from happening.
- This fixes a particularly nasty bug that can corrupt the TS on UnrealIRCd channels if a MODE command sets more than 12 modes at once (#393).
Added utilities to download contrib modules (pylink-contribdl) and hash passwords for the new accounts configuration (pylink-mkpasswd).
Most plugins were ported to the permissions API.
Clientbot now supports mode syncing, SASL (with optional reauth), and IRCv3 multi-prefix.
Services bots now support setting modes on themselves on join: see “joinmodes” in the example conf
Changehost gained a few new features, including optional (per network) vHost enforcement.
Added a bindhost option in server blocks, for multi-homed hosts.
PID file checking was implemented - Run PyLink with the --check-pid argument in order to turn it on.
The ts6 protocol module now supports KICK without arguments and legacy UID introduction (for older servers / services).
Relay: added a purge command to remove all relays involving a network.
Added support for ircd-ratbox (ratbox protocol module).
Changing the console log level via REHASH now works.
New servermaps plugin, displaying network /map’s from the PyLink server’s perspective.

PyLink 1.1-beta2

The “Conscience” release. Changes from 1.1-beta1:

Bug fixes

Protocol modules now wrap longer messages (SJOIN and MODE) to prevent cutoff shenanigans from happening.
- This fixes a particularly nasty bug that can corrupt the TS on UnrealIRCd channels if a MODE command sets more than 12 modes at once (#393).
Pong handling is a lot less strict now (it just makes sure the sender is the uplink). In other words, fix issues on UnrealIRCd where PONGs get ignored if the argument doesn’t match the server name exactly (e.g. different case).
Clientbot protocol fixes:
- Fix SASL PLAIN auth on Python 3.4 (TypeError with bytes formatting with %b).
- Don’t repeat KICK hooks if the source is internal: this prevents KICK events from being relayed twice to Clientbot links, when the kicked user is also a Clientbot user.
- Clientbot now explicitly sends /names after join, to guarantee a response.
- Fix message recognition treating nick prefixes without ident@host as servers (this polluted the state)
- Fix prefix mode changes for unknown/missing users in /who causing KeyError crashes
ts6: fix setting mode -k * not working due to wrongly ordered logic (1.1-dev regression)
ts6: fix handling of KICK without a reason argument
Automode: remove some repeated “Error:” text in error messages
IrcChannel no longer assumes +nt on new channels, as this is not necessarily correct

Feature changes

Changing the console log level via REHASH is now supported.
Added a bind host option for multi-homed hosts.

Internal improvements

updateTS now ignores any broken TS values lower than 750000, instead of propagating them (e.g. over relay) and making the problem worse.
The UnrealIRCd protocol module was updated to actually use extended SJOIN (SJ3). This should make bursts/startup more efficient, as modes, users, and bans are now sent together.

PyLink 1.1-beta1

The “Crunchy” release. This release includes all bug fixes from PyLink 1.0.4, along with the following:

Changes from 1.1-alpha1

Feature changes

Most plugins were ported to use the permissions API, meaning multiple accounts are actually useful now!
- Having a PyLink login with new style accounts no longer implies access to everything on the PyLink daemon. See the updated example conf regarding the new permissions: block.
- Logins implying admin access is limited to old accounts ONLY (i.e. logins defined via login:user/password)
- The commands plugin now has permissions checks for echo, showuser, showchan, and status. The latter three are granted to all users (*!*@*) by default, while echo is restricted.
Clientbot now supports IRCv3 SASL (with optional reauth!) and multi-prefix. See the example conf for details on the former (the latter is enabled automatically when available).
PID file checking is now disabled by default for better migration from 1.0.x. Run PyLink with --check-pid in order to turn it on.
commands: add a new logout command (#370)
The list command now supports optionally filtering commands by plugin.

Bug fixes

The permission to use servermaps is now servermaps.map instead of servermap.map.
networks: fix the remote command to work with permissions (i.e. override the correct account name)
relay: add missing permissions check on the linked command

Internal fixes / improvements

relay: rewrite host normalization to whitelist instead of blacklist characters. This should improve compatibility with IRCds as previously untested characters are introduced.
relay_clientbot: faster colour hashing using built-in hash() instead of md5
opercmds: removed the source argument from kick and kill; it’s confusing and isn’t very useful

Misc. changes

Documentation updates: add a permissions reference, document advanced relay config, etc.

PyLink 1.0.4

Tagged as 1.0.4 by jlu5

The “Bonfire” release.

Bug fixes

protocols: implement basic nick collision detection in UID handlers. This fixes users potentially going missing on UnrealIRCd networks, if the remote IRCd introduces a user of the same nick after PyLink does. Thanks to kevin for reporting!
relay: strip underscores (_) from hosts on ts6 and ratbox, fixing possible invalid user@host errors
Backported fixes from 1.1.x / devel:
- Demote “unknown user” warnings in mode handling to DEBUG, suppressing warnings when old services like Anope 1.8 set modes on users as they quit.
- Fix irc.matchHost() confusing the realhost boolean to be the same as ip.
- changehost: add missing permissions check to applyhosts; it now requires the changehost.applyhost permission.

Misc changes

networks: update help for disconnect to reflect how it now always disables autoconnect.

PyLink 1.1-alpha1

The “Candescent” release.

Changes from 1.0.3

Feature changes

Clientbot now supports optional mode syncing 🎉 See the example conf for how to configure it (look for “modesync”).
PID file checking has been implemented and is turned on by default. ⚠️ When upgrading from 1.0.x, remove pylink.pid before starting!
Revamped login configuration system, which now supports multiple accounts and hashed passwords
- ⚠️ login:user and login:password are now deprecated and may be removed in a future release. Consider migrating to the new login: block in the example config.
- Hashing new passwords can be done using the mkpasswd command via IRC, or the new command line utility pylink-mkpasswd.
Services bots now support setting modes on themselves on join: see “joinmodes” in the example conf
Added a contrib module downloader (pylink-contribdl)
Relay now uses the PyLink permission system. The following permissions are now available:
- Granted to opers by default:
  - relay.create
  - relay.destroy
  - relay.claim
  - relay.link
  - relay.delink
  - relay.linkacl.view
  - relay.linkacl
- Granted to all users by default:
  - relay.linked
- And the following which is not explicitly granted:
  - relay.savedb
Relay: added a purge command to remove all relays involving a network
Automode now supports remote channel manipulation in the form netname#channel (#352)
protocols/ts6 now supports legacy UID introduction, for older servers / services
Changehost gained a few new features (look for “changehost:” in the example conf):
- Optional (per network) vHost enforcement: now you can create spoofs like freenode without using their IRCd!
- Enforcement exceptions for the feature above
- Options to enable/disable matching users by IP and real host
New protocol support for ircd-ratbox, based off ts6
New servermaps plugin, displaying network /map’s from the PyLink server’s perspective. Relay links can be expanded as well to make this more detailed!
Oper status tracking is now a network-specific option, for better security. Look for “track_oper_statuses” in the example config.
The PyLink launcher now sets the terminal title on launch (Windows & POSIX)
relay: implement a complementary showchan command, showing a list of relay links

Bug fixes

Relay is potentially less crashy when PyLink is split off while it tries to introduce users (#354).
The bots plugin now allows JOIN/NICK/PART on all service bots
Relay: skip channel TS check for Clientbot (some users had this as a sporadic issue)
Irc: explicitly kill connect loop threads after an Irc object has been removed. This fixes various freezing issues caused by ghosted connections after a network splits (#351).
Relay: don’t error when removing a channel from a network that isn’t connected. (AttributeError on removeChannel() if irc.pseudoclient isn’t set)

Internal fixes / improvements

Server ID and service client name (if applicable) are now stored inside IrcUser objects, removing the need for some expensive reverse lookups
Relay and Automode now use a centralized DataStore (backwards compatible) in structures for their database implementation
Docstring rewrapping is now supported for neater, wrappable docstrings! (#307)
Irc.error() was added for easier error replies; it is a simple wrapper around Irc.reply()
Relay now uses locks in DB read/writes, for thread safety
Most camel case functions in Relay were renamed to lowercase with underscores (PEP 8)

Misc. changes

exec: Drop raw text logging to DEBUG to prevent information leakage (e.g. passwords on Clientbot)
Removed update.sh (my convenience script for locally building + running PyLink)

PyLink 1.0.3

Tagged as 1.0.3 by jlu5 on 2016-11-20T04:51:11Z

The “Buoyant” release.

Changes from 1.0.2

Bug fixes

Fixed invalid database names such as “automode-/tmp/test.db” from being generated when PyLink is started with an absolute path to its config.
Backported fixes from 1.1-dev:
- relay: skip channel TS checks for Clientbot, preventing possible “channel too old” errors on link.

Feature changes

Backported features from 1.1-dev:
- Relay: allow configuring custom relay server suffixes

Misc. changes

Various spelling/grammar fixes in the example config.

PyLink 1.0.2

Tagged as 1.0.2 by jlu5 on 2016-10-15T05:52:37Z

The “Baluga” release.

Changes from 1.0.1

Bug fixes

Clientbot: Fixed nick collisions between virtual clients and real users (#327)
Fix typo in example conf that caused log::filerotation to become an empty, None-valued block. This in turn caused the log module to crash.

Feature changes

Clientbot now uses a more specific realname fallback (“PyLink Relay Mirror Client”) instead of potentially misleading text such as “PyLink Service Client”. In the future, this text may be made configurable.

Internal fixes / improvements

setup.py: reworded warnings if git describe --tags fails / fallback version is used. Also, the internal VCS version for non-Git builds is now -nogit instead of -dirty.

PyLink 1.0.1

Tagged as 1.0.1 by jlu5 on 2016-10-06T02:13:42Z

The “Beam” release.

Changes from 1.0.0

Bug fixes

Fix PyLink being uninstallable via PyPI due to missing VERSION and README.md
ts6: don’t crash when CHGHOST target is a nick instead of UID
relay: clobber colour codes in hosts
bots: allow JOIN/NICK/QUIT on ServiceBot clients

PyLink 1.0.0

Tagged as 1.0.0 by jlu5 on 2016-09-17T05:25:51Z

The “Benevolence” release.

Changes from 1.0-beta1

Bug fixes

Clientbot now relays text sent from service bots.
Fixed KeyErrors in Clientbot when receiving WHO replies for clients we don’t know – these are now ignored.
Relay now skips mode type definitions when doing reverse mode lookup. This fixes channel mode +l mever being relayed UnrealIRCd, because +l happened to be the only supported type C mode.
protocols/nefarious: fix UnboundLocalError when no modes are given on user introduction
fantasy: don’t error when bots are removed while processing a message (e.g. on shutdown)

Feature changes

Automode now limits listacc to opers instead of all users (with default permissions settings).

Internal fixes / improvements

Fixed incomplete hook payload keys from 1.0-beta1 (oldchan/chandata -> channeldata)
services_support: hack away nick clashes between service clients & real users from Clientbot networks
clientbot: downgrade bad updateClient() calls to warning

Misc. changes

Documentation updates: Automode+permissions guide, README refresh, others.
Example configuration changes:
- Automode’s bot nick now defaults to “Automode” instead of “ModeBot” for consistency.
- Added a debug log example ^{^{^{because nobody knew how to
  turn it on}}}
- Fix inverted option description for Relay’s show_netsplits option.

PyLink 1.0-beta1

Tagged as 1.0-beta1 by jlu5 on 2016-09-03T07:49:12Z

The “Badgers” release. Note: This is an beta build and may not be completely stable!

Changes from 0.10-alpha1

Bug fixes

Fixes for the Clientbot protocol module:
- Fix nick() referring to the wrong variables (and thus not working at all)
- Fix crashes caused by forced nick changes on connect
- Clientbot now only sends CHGHOST/CHGIDENT/CHGNAME hooks the field has actually changed
Automode now joins the Modebot client on setacc, if not already present

Feature changes

Irc: implement basic message queueing (1 message sent per X seconds, where X defaults to 0.01 for servers) .
- This appears to also workaround sporadic SSL errors causing disconnects (https://github.com/jlu5/PyLink/issues/246)
relay: CLAIM is now more resistant to things like /OJOIN abuse^{^{^{Seriously people, show some
respect for your linked networks ;)}}}.
core: New permissions system, used exclusively by Automode at this time. See example-permissions.yml in the Git tree for configuration options.
relay_clientbot now optionally supports PMs with users linked via Clientbot. This can be enabled via the relay::allow_clientbot_pms option, and provides the following behaviour:
- Private messages and notices TO Clientbot users are forwarded from the Relay bot as NOTICE.
- Private messages can be sent FROM Clientbot users using the rpm command in relay_clientbot
The PyLink launcher now shows the full VCS version in pylink -v
Revert “relay_clientbot: always lowercase network name (stylistic choice)”

Internal fixes / improvements

protocols/unreal: use umode +xt instead of blind /SETHOST when spawning users
protocols/clientbot: handle numerics 463 (ERR_NOPERMFORHOST), 464 (ERR_PASSWDMISMATCH), and 465 (ERR_YOUREBANNEDCREEP) as fatal errors
protocols: various fields in hook payloads are renamed for consistency:
- The chandata field in SQUIT payloads is renamed to channeldata
- The oldchan field in MODE payloads is renamed to channeldata
Irc.msg() should no longer send empty text strings (which are technically illegal) in things like help strings.
Irc: make sending of loopback hooks in msg() optional
relay_clientbot: switch to irc.msg() for relayed text

Misc. changes

Various to documentation update and installation instruction improvements.

PyLink 0.10-alpha1

Tagged as 0.10-alpha1 by jlu5 on 2016-08-22T00:04:34Z

The “Balloons” release. Note: This is an alpha build and may not be completely stable! This version includes all fixes from PyLink 0.9.2, with the following additions:

Changes from 0.9.2

Bug fixes

Improved syncing between Automode and Relay on JOINs. In other words: fixed Automode sometimes setting modes on join before all of a target’s relay clones have joined corresponding relay channels on remote networks.
protocols/inspircd now tracks required modules for vHost updating (CHGHOST/IDENT/NAME), instead of potentially sending unknown commands to the IRCd and causing a netsplit.
changehost now explicitly forbids $host from being used in expansion fields, preventing vHosts from potentially being set in a loop whenever applyhosts is called.
eval now formats empty strings correctly, instead of having no visible reply. In other words, it now wraps all output with repr().
relay: fix reversed prefix mode order in bursts (e.g. +@~UID instead of ~@+UID). Fortunately, this is minor detail; no noticeable adverse effects to IRCd linking was ever experienced.

Feature changes

WIP Clientbot protocol module: allows PyLink to connect as a bot to servers, for purposes such as relay.
- Some features such as flood protection, services account tracking, and IRCv3 support are still missing.
- For Clientbot relay support, remember to also load the relay_clientbot plugin!
Added the ability to rotate logs at certain sizes, keeping X backups for reference.
REHASH now updates file logging settings.
Relay now allows configuring a list of nick globs to always tag nicks (forcetag_nicks: block in relay:)
networks: new reloadproto command, allowing in-place reloading of protocol modules without restart.
Ctrl-C / KeyboardInterrupt now cleanly shuts down PyLink (in most cases).
SSL cert file and key file are now optional.
changehost: show more friendly errors when an expansion field is unavailable
protocols/inspircd: add support for SAKICK, ALLTIME.
protocols/ unreal: add support for TSCTL ALLTIME.
Added support for /time requests.

Internal fixes / improvements

Shutdown now cleanly quits the PyLink service bot instead of simply splitting off.
PyLink now shows a better error if a protocol module chosen is missing.
Config key validation is now protocol-specific.
The IrcUser.identified attribute was renamed to IrcUser.account.
exec: make pylinkirc and importlib accessible for easier debugging.
SQUIT hooks get a few more arguments, such as nicks (affected nicks) and serverdata (old IrcServer object).
Retrieving the hostname used by the current PyLink instance is now a shared function: irc.hostname()
Better handling of empty lines in command help - these are now sent as a single space instead of passing invalid text like :<UID> NOTICE <UID> : to the IRCd (no text in the text parameter).
protocols/ts6: handle incoming ETB (extended topic burst) and EOPMOD (partial support; op moderated +z messages are converted to forms like @#channel).
protocols/unreal: explicitly declare support for ESVID, or account name arguments in service stamps. Realistically this doesn’t seem to affect S2S traffic, but it is the correct thing to do.

Misc. changes

FakeIRC and FakeProto are removed (unused and not updated for 0.10 internal APIs)

PyLink 0.9.2

Tagged as 0.9.2 by jlu5 on 2016-08-21T23:59:23Z

The “Acorn” release.

Changes from 0.9.1

Bug fixes

Relay now treats {} as valid characters in nicks.
Fixed services login tracking for older Anope services + UnrealIRCd. Previously, PyLink would incorrectly store login timestamps as the account name, instead of the user’s nick.
Relay now normalizes / to . in hostnames on IRCd-Hybrid.
Cloaked hosts for UnrealIRCd 3.2 users are now applied instead of the real host being visible.

PyLink 0.9.1

Tagged as 0.9.1 by jlu5 on 2016-08-07T03:05:01Z

Important, backwards incompatible changes for those upgrading from 0.8.x!

The configuration file is now pylink.yml by default, instead of config.yml.
PyLink now requires installing itself as a module, instead of simply running from source. Do this via python3 setup.py install --user.
The use_experimental_whois option for InspIRCd servers and the spawn_servers option in Relay have been removed, as they are now implied.

Changes from 0.9.0

Bug fixes

Fixed various bugs in channel TS handling (this should reduce mode desyncs with relay).
protocols/unreal: fixed services account support for older services (e.g. Anope < 2.0) that don’t explicitly use account names for logins (#296).
Mode changes are no longer sorted alphabetically when relayed: sorting now only applies for displaying a list of modes, such as in WHOIS.
Invalid autojoin channels are now ignored, instead of passing potentially invalid data to the IRCd.

Feature changes

setup.py now explicitly forbids installing on Python 2 (#297).
The nefarious protocol module now forwards MODE and KICK through servers if the sender isn’t opped, preventing many mode bounces, kick failures, and HACK server notices.

Internal fixes / improvements

protocols/hybrid,ts6,unreal: Casemapping-specific lowercasing is now consistently used for channel names
Relay now catches errors on network removal and ignores them.
Channels names are now case normalized when receiving @#channel messages.

Misc. changes

Minor example configuration updates, including a mention of passwordless UnrealIRCd links by setting recvpass and sendpass to *.

PyLink 0.9.0

Tagged as 0.9.0 by jlu5 on 2016-07-25T05:49:55Z

Important, backwards incompatible changes for those upgrading from 0.8.x!

The configuration file is now pylink.yml by default, instead of config.yml.
PyLink now requires installing itself as a module, instead of simply running from source. Do this via python3 setup.py install --user.
The use_experimental_whois option for InspIRCd servers and the spawn_servers option in Relay have been removed, as they are now implied.

Changes from 0.9-beta1

Added / changed / removed features

PyLink is now slightly more descriptive if you try to start it with missing dependencies or a missing conf file.
The PyLink API reference is now at https://pylink.github.io/ instead of in docs/technical.
The exec and eval commands now have access to the pylinkirc and importlib imports by default.
jupe from the opercmds plugin now requires the admin login instead of just oper.
opercmds: kick now treat channels case insensitively.
Documentation update: there are now guides to Automode and PyLink’s Services API.

Bug fixes

Fixed the reload command (again).
Fixed compatibility with ircmatch 1.2: PyLink previously used features that were only available in the unreleased Git version.
The identify command now responds with NOTICE instead of PM, behaving like any other command. Thanks to @Techman- for pointing this out.
The identify command must be called in private again.
Relay now shows secret channels in linked to those inside the channel, regardless of whether they’re opered.
$channel:#channel:prefixmode exttarget matching no longer raises errors if the target isn’t in the specified channel.

Internal improvements

Redone version handling so __init__.py isn’t committed anymore.
update.sh now passes arguments to the pylink launcher.

PyLink 0.9-beta1

Tagged as 0.9-beta1 by jlu5 on 2016-07-14T02:11:07Z

Important, backwards incompatible changes for those upgrading from 0.8.x

The configuration file is now pylink.yml by default, instead of config.yml.
PyLink now requires installing itself as a module, instead of simply running from source. Do this via python3 setup.py install --user.

Changes from 0.9-alpha1

Added / changed / removed features

The use_experimental_whois option for InspIRCd servers is removed, and is now implied.
New config option bot: whois_show_extensions_to_bots, which optionally disables extended WHOIS replies for users marked as a bot (+B).
- This increases security when relay is enabled, for bots that look for services logins in WHOIS.
Automode has new clearacc and syncacc commands, for clearing and syncing access lists respectively.
Relay now allows nick tagging to be turned off by default, via the option relay: tag_nicks (#116)
- This is experimental, and nick tagging is still enabled by default.
- Any attempts to KILL or SVSNICK a relay client are treated to force tag a nick, so things like /ns release, /ns ghost, and /ns regain should work with network services.
Automode now only sends one MODE command per sync, to prevent changes from flooding channels.
Relay separators can now be configured globally (relay: separator option), with server-specific overriding that value if given.

Bug fixes

corecommands: fix unload failing to remove hooks and commands (0.9.x regression).
protocols/nefarious: only send EOB_ACK to the direct uplink, preventing stray “acknowledged end of net.burst” messages from showing up. Thanks to Speakz on Evilnet IRC for reporting.
protocols/unreal: fix server name of the uplink server not being saved (#268)
Channel prefixes are now sorted in WHOIS output (i.e. no more wrong @~#channel), and only the highest prefix shown
Fixed issues in internal channel mode tracking (c1cd6f4 58d71b0)
WHOIS requests to the PyLink server for clients that aren’t PyLink bots now work (syntax: /raw whois pylink.server somenick). “No such nick” errors are also sent when the target is missing, instead of raising warnings.
- These WHOIS responses were previously sent from the wrong source (the server that the client was on, instead of the PyLink server), causing them to be ignored if they were going the wrong way.
Automode now treat channels case insensitively in delacc.
ascii and rfc1459 case mappings now treat Unicode case sensitively, in the same way an IRCd would.

Internal improvements

Removed inaccurate references to signon time in WHOIS and elsewhere.
Changes to user timestamps are now tracked on NICK and SAVE commands
Relay now creates relay clones with the current time as nick TS, instead of the origin user’s TS.
- This has the effect of purposely losing nick collisions against local users, so that it’s easier to reclaim nicks.

PyLink 0.9-alpha1

Tagged as 0.9-alpha1 by jlu5 on 2016-07-09T07:27:47Z

Summary of changes from 0.8.x

Backwards incompatible changes

Configuration file is now pylink.yml by default, instead of config.yml.
PyLink now requires installing itself as a module, instead of simply running from source. Do this via python3 setup.py install --user.

Added / changed / removed features

New ctcp plugin, handling CTCP VERSION and PING ~~(and perhaps an easter egg?!)~~
New automode plugin, implementing basic channel ACL by assigning prefix modes like +o to hostmasks and exttargets.
New exttarget support: see https://github.com/jlu5/PyLink/blob/0.9-alpha1/coremods/exttargets.py#L15 for a list of supported ones.
Relay can now handle messages sent by users not in a target channel (e.g. for channels marked -n)
Relay subserver spawning is now always on - the spawn_servers option is removed
Relay can now optionally show netsplits from remote networks, using a show_netsplits option in the relay: block
The channels configuration option in server: blocks is now optional, and defaults to no channels if not specified
The maxnicklen configuration option is also now optional, with a default value of 30 characters.
--version, --no-pid, and --help are now implemented by PyLink’s command line script
Test cases were dropped - they were broken and poorly maintained.
CPUlimit wrapper scripts were removed.
Service bots now allow plugins to define service descriptions and mark commands as featured when adding them.
Command replies for services bots are now consolidated into core. In general, FANTASY commands now reply in channel as PRIVMSG, while all commands sent in PM reply as private notices.
protocols/inspircd: new use_experimental_whois server option, which forces PyLink to handle WHOIS requests locally. This allows relay WHOIS extensions like account name and origin server name (whois_show_* options) to actually work on InspIRCd networks.
PyLink can now optionally protect its services clients by setting servprotect modes (InspIRCd umode +k, +S elsewhere). The option for this is protect_services in the bot: block.
The networks now deletes IRC objects when disconnect is used. To reconnect all disconnected networks, use the rehash command.
Relay now hides disconnected leaf networks from LINKED output.

Bug fixes

Services bots will now ignore unhandled CTCP requests, instead of responding with “Unknown command”
The sid field for TS6 servers now accepts unquoted numeric SIDs (integers) by normalize the SID to a string
protocols/nefarious: fix wrong variable in “/join 0” handling causing crashes
The PyLink bot now rejoins relay channels when it is killed
protocols/ts6: fix wrong args in TB handling

Internal improvements

coreplugin.py is split into coremods/, with many different submodules for easier maintenance.
Rewritten channel TS handling to be more concise and reusable
protocols/unreal: warn about mode bounces instead of fighting with the uplink
protocols/ts6, protocols/nefarious: use protocol-specific ban bursting instead of sending a regular MODE
Irc.parseModes() now handles strings given as the mode list properly, instead of only accepting a list of modestring arguments
SQUIT handlers now return an uplink field with the SID of the server that the target was split from
protocols/ts6: send 12 users (SJOIN) and 10 modes (TMODE) per line, instead of 10 and 9 respectively
Relay is now slightly more careful when normalizing nicks: they can’t have invalid characters, start with a hyphen (-), etc.
Modes are now sorted when joined. You’ll now see things like +Hiow instead of +wHoi
protocols/inspircd: services clients with mode +k now have the “Network Service” oper type, in WHOIS replies and elsewhere
SQUIT and KILL handling are moved into a protocols/ircs2s.py module, as the handling is basically the same on both TS6 and P10.
protocols/nefarious,ts6,unreal: KILL handling (inbound & outbound) now supports kill paths and formats kill reasons properly
protocols: encapsulated (ENCAP) commands are now implicitly expanded, so protocol modules no longer need to bother with IF statement chains in a handle_encap()

PyLink 0.8-alpha4

Tagged as 0.8-alpha4 by jlu5 on 2016-06-30T18:56:42Z

Major changes in this snapshot release:

SECURITY: Forbid SSLv2 and SSLv3 in SSL socket creation (0fbf9e1)
Configurable nicks for services (per-net and global, #220, #229)
Resolve server hostnames when connecting (#158).
protocols/ts6: fix incorrect WHOIS syntax causing connection abort (6060a88)
protocols/nefarious: fix bad /join 0 handling causing connection abort (b1e138d)
relay: forbid linking two channels on the same network (e47738c)
protocols: various fixes for mode definitions, including missing +i handling on ts6 and unreal (26df48c, 3e19e9c)
Consistent defaults to ping frequency and timeout (now 90 and 180 seconds respectively)
Example conf: fix various typos (0edb516, cd4bf55) and be more clear about link blocks only being examples
Various freezes and crash bugs fixed (dd08c01, 1ad8b2e, 504a9be, 5f2da1c)

Full diff: https://github.com/jlu5/PyLink/compare/0.8-alpha3…0.8-alpha4

PyLink 0.8-alpha3

Tagged as 0.8-alpha3 by jlu5 on 2016-06-01T02:58:49Z

relay: support relaying a few more channel modes (flood, joinflood, freetarget, noforwards, and noinvite)
Introduce a new (WIP) API to create simple service bots (#216).
The main PyLink client now spawns itself with hideoper whenever available, to avoid filling up /lusers and /stats P/p. (#194)
The fantasy plugin now supports per-bot prefixes; see example conf for details.
Purge c_ and u_ prefixes from PyLink’s internal named modes definitions (#217).
Various documentation updates.
New games plugin, currently implementing eightball, dice, and fml.
Various fixes to the Nefarious protocol module (89ed92b46a4376abf69698b76955fec010a230b4…c82cc9d822ad46f441de3f2f820d5203b6e70516, #209, #210).

PyLink 0.8-alpha2

Tagged as 0.8-alpha2 by jlu5 on 2016-05-08T04:40:17Z

protocols/nefarious: fix incorrect decoding of IPv6 addresses (0e0d96e)
protocols/(hybrid|nefarious): add missing BURST/SJOIN->JOIN hook mappings, fixing problems with relay missing users after a netjoin
protocols/unreal: fix JOIN handling storing channels with the wrong case (b78b911323)
protocols/inspircd: fix wrong username being sent when formatting KILL text
commands: Fix loglevel command being ineffective (#208)
relay: Fix various race conditions, especially when multiple networks happen to lose connection simultaneously
API changes: many commands from utils were split into either Irc() or a new structures module (#199)

Full diff

PyLink 0.8-alpha1

Tagged as 0.8-alpha1 by jlu5 on 2016-04-23T03:14:21Z

New protocol support: IRCd-Hybrid 8.x and Nefarious IRCu
Track user IPs of UnrealIRCd 3.2 users (#196)
SIGHUP now rehashes PyLink on supported platforms (#179)
Improved mode support for Charybdis (#203)
Fix disconnect logic during ping timeouts

Full diff

PyLink 0.7.2-dev

Tagged as 0.7.2-dev by jlu5 on 2016-04-19T14:03:50Z

Bug fix release:

Support mixed Unreal 3.2/4.0 networks (#193)
More complete APIs for checking channel access (#168)
New servprotect plugin for KILL/SAVE flood protection. This was split out of relay due to expiringdict not being installable via pip.
Documentation update (protocol module variables, mention new WHOIS, VERSION hooks)
Minor fixes for Windows support. (#183)
SIGTERM should now shut down the daemon cleanly. (#179)

8ee64d5ec1 readme: mention why expiringdict is broken in pip3
528dfdba2a pmodule-spec: mention cmodes, umodes, prefixmodes variables
cb3187c5e9 ts6_common: do reverse nick lookup for KICK targets
55afa1bff6 unreal: log instances of PUID manging to debug
75984c3c4c ts6_common: add abstraction to convert UIDs->outgoing nicks
9f20f8f767 unreal: update SJOIN matching regex
4157cb5671 ts6_common: use a better variable name for _getSid()
e687bb0a78 unreal: remove outfilter hack, this doesn’t handle text including PUIDs properly
0136ff2c3a example conf: mention using spaces to indent
86781d37ba README: fix typo
9fde35fd77 relay: handle server name conflicts more correctly
c01b449741 relay: treat network names case-sensitively
02ec50826b unreal: fix super() syntax in SQUIT handling
16779aa5ce classes: remove lower() call when storing netname
6acfbb4125 unreal: case-desensitize legacy server names when handling user introductions from them
62da384cae README: unreal 3.2 mixed networks are supported now, sorta
5d0f450c73 Merge branches ‘master’ and ‘devel’ into devel+unreal32
956167538a unreal: add warnings & more descriptive errors regarding mixed_link
f3ceefe87f unreal: initialize legacy users on the right server
efd13d20ee example-conf: add sample unreal block, documenting mixed_link
44b102ffce networks: allow all opers to run ‘autoconnect’
13e97177e2 docs: Add a PyLink oper guide
c4273e68a4 unreal: fix for Python 3.4 support
4f08894227 unreal: typofix
10be962318 unreal: actually return the hook data for NICK & KILL
44dc856ffa unreal: use an awful outFilter hack to convert PUIDs->nicks when sending outgoing commands
74ee1ded4d unreal: Start work on some really hacky Unreal 3.2 compat code (#193)
3e7255e4b2 classes: remove ts6-specific hack in Protocol.removeClient
514072804c README: mention the implications of #193
fd32bbf45f unreal: fix typo in last commit
efcc30c983 unreal: don’t confuse legacy SERVER introductions from our uplink with protocol negotiation
fab404f8d6 Merge branches ‘master’ and ‘wip/relay-fixes’ into devel
3a8b0aa123 relay: catch OSError too when loading DB
1bcadbe12b Use more flexible shebangs (/usr/bin/env python3)
9e33081bc9 relay: fix typo in comment
d21344342d relay: experimental fix for #183
8b7a9f6b45 Merge pull request #189 from DanielOaks/devel+ignore-env
d287a22aec gitignore: Ignore env folder for virtualenvs
58519011b8 coreplugin: modularize shutdown routines, handle SIGTERM->shutdown
b100f30cfe fantasy: break if IRC object isn’t ready
cf363432f0 pylink: use abspath() to get the source directory
662d1ce03f inspircd: warn that inspircd 2.2 support is experimental
4a0ee6f54c relay: be more thread-safe via dict.copy()
305db9f754 utils: also don’t crash in applyModes for bad mode targets
e70dfb0811 Merge branch ‘master’ into devel
08c3b99dfb relay: fix ambiguous logging in KICK blocking
4125ff33b1 pylink: prettier “Loaded plugins” log message on start
d5d3c2422b inspircd: define minimum & target protocol versions instead of hardcoding them
70b9bde2c4 unreal: fix a little typo
ad517f80da unreal: bump protocol version to 4000
19ac5b59a5 protocols: drop underscores from pre-defined opertypes
c71d2bfcb9 coreplugin: sync opertype changes in handle_operup
9278e56dd8 coreplugin: normalize WHOIS output format
44083ccd5e core: Store opertype info in all IrcUser objects
bdbc1020f2 Merge branch ‘master’ into devel
fbd8659a7d classes: spawn PyLink clients with a custom opertype
a91fa46549 Regenerate pydoc documentation
c8a3514776 hooks-reference: add VERSION and WHOIS
f618b96b34 inspircd: add VERSION handling
00552a41a7 Move detailed version string generation to utils
23056e97e3 protocols & coreplugin: add handlers for VERSION requests
45c2abdae7 Irc: run initVars() on connect too
aedb05608e relay: actually, just kill handle_spawnmain
b2b04c8e75 classes: really ignore errors when shutting down sockets
ce3d3cf697 relay: check to make sure network is ready before handling spawnmain
0bb54d88e0 New servprotect plugin (anti-KILL/SAVE flood)
9fe3373906 relay: get rid of kill/save protection
75ec95b8d3 Merge branch ‘master’ into devel
03b53aee59 Merge branch ‘staging’ into devel
e183078645 protocols: Remove “secret” testing channel name
6962f3b73e ts6: unset has_eob correctly on reconnects
c176c90bb6 coreplugin: use IrcChannel.getPrefixModes in whois replies
f5f0df52ce classes: raise KeyError, not return KeyError…
c86a02e044 relay: use IrcChannel.getPrefixModes
e948db5c7b classes: support looking at older versions of prefix modes mappings
d84cfbcda1 utils: simplify prefix modes handling in applyModes
e8b0018585 classes: Implement IrcChannel.is(Voice|Halfop|Op)Plus (#168)
ed333a6d1b classes: implement IrcChannel.isOp, isVoice, getPrefixmodes, etc
8135f3a735 core: Depluralize prefixmodes mappings (#168)
1d4350c4fd classes: provide IrcChannel objects with their own name using KeyedDefaultdict
544d6e1041 utils: add KeyedDefaultdict

PyLink 0.7.1-dev

Tagged as 0.7.1-dev by jlu5 on 2016-03-31T01:42:41Z

Bugfix release. Lingering errata which you may still encounter: #183.

0fd093644c utils: don’t crash when mode target is invalid
1930739aad Revert “Irc: don’t call initVars() on IRC object initialization”
2b16f25b61 classes.Irc: clear state on disconnect, not on connect
a4395ed989 log: respect child loggers’ levels if they are lower than the main one’s
46922ce879 relay: remove dead networks’ servers from the servers index unconditionally
f2a21148e7 Irc: run initVars() on connect too
9cd1635f68 unreal: fix wrong variable name in handle_umode2
2169a9be28 utils: actually abort when mode target is invalid

PyLink 0.7.0-dev

Tagged as 0.7.0-dev by jlu5 on 2016-03-21T19:09:12Z

Changes from 0.6.1-dev:

d12e70d5e5 ts6: unset has_eob correctly on reconnects
5b2c9c593b Add .mailmap
abce18a5ba log: split multi-line channel logs into multiple PRIVMSGs
a8303d0110 commands: sort channel list in ‘showuser’ output
0dd8b80a21 docs/t: use rawgit links to serve HTML
506ae011a4 Update autogenerated docs (adding a script to do this now)
d8e5202e5b world: use a better module description
2adb67d38e runtests: remove .py extension, only run tests when ran as a script
da7bd649d2 conf: fix testconf missing the logging: section
557efc369f docs/t: mark hooks-reference as finished in README
9d0fcb5395 docs: finish off hooks-reference (#113)
15b35f1853 ts6: support charybdis +T mode (closes #173)
359bfcd9da bots: map ‘msg’ command to ‘say’ too
b6889fb097 irc: fix spacing in certificate fingerprint logging
7f5bc52152 relay: fix errors in KILL handling when target isn’t in any relay channels
3527960d18 coreplugin: tell plugins to exit cleanly before closing connections
9b0db81068 changehost: modularize, add a command to apply cloaks now, match IPs too
14388d932f utils.getHostmask: add option to return IP address
5fed4629a6 networks: remove networks with autoconnect off in ‘disconnect’
8ac5436152 relay: allow admins to destroy channels hosted on other networks
4df027cac4 coreplugin: ignore services’ attempts to send accountname before user introduction
1ce2725f1e bots: update help for ‘msg’ command (reflect changes made for #161)
54dc51aed4 bots: make source client names optional (Closes #161)
34ca973047 relay: cleanup, consistently include the function in log.debug calls
a740163cbe relay: implement DB exporting using threading.Timer, similar to classes.Irc.schedulePing
d531201850 Merge branch ‘master’ into devel
ae8f369f2e relay: only show networks that are actually connected in LINKED
de1a9a7995 relay: various cleanup
eec8e0dca4 log: attempt to remedy #164 (more testing needed)
40d76c8bb6 coreplugin: demote successful oper-up messages to debug
df23b79780 commands: reformat ‘showuser’ output, and show services login info (#25)
decdf141fd unreal: don’t use updateClient to update hostname of clients internally
2ebdb4bad6 unreal: support services account tracking (#25), fix handle_SVSMODE applying modes on the wrong target
cabdb11f86 inspircd: implement services account tracking (#25)
0fff91edfd ts6: implement services account tracking (#25)
cf15bed58d classes: add services_account field in IrcUser (#25), default ‘identified’ attribute to empty string instead of None
584f952113 conf: check to make sure logging block exists in config
5877031203 Merge branch ‘master’ into devel
21167e8fb3 example conf: use 1 “#” without trailing space for commented-out options
0d4655c381 core: support multiple channel loggers with DIFFERENT log levels & fix example conf (#83)
669e889e6f Support configurable SSL fingerprint hash types (Closes #157)
08fd50d3d8 Logging improvements, including support for custom file targets (#83)
de84a5b437 log: default level should be INFO, not DEBUG
cf1de08457 commands: support rehashing channel loggers
2503bd3ee5 commands: In rehash, use irc.disconnect() to disconnect networks removed from conf
14efb27fe8 Initial experimental support for logging to channels (#83)
4b939ea641 ts6: rewrite end-of-burst code (EOB is literally just a PING in ts6)
5a68dc1bc5 Irc: don’t call initVars() on IRC object initialization

PyLink 0.6.1-dev

Tagged as 0.6.1-dev by jlu5 on 2016-03-02T05:15:22Z

Bug fix release.
- unreal: fix handing of users connecting via IPv4 3c3ae10
- ts6: fix incorrect recording of null IPs as 0 instead of 0.0.0.0 fdad7c9
- inspircd, ts6: don’t crash when receiving an unrecognized UID 341c208
- inspircd: format kill reasons like Killed (sourcenick (reason)) properly.

PyLink 0.6.0-dev

Tagged as 0.6.0-dev by jlu5 on 2016-01-23T18:24:10Z

Notable changes in this release:

New “opercmds” plugin:
- This merges some functionality from the bots plugin, but also adds new commands such as jupe, kill, topic, and checkban.
New “changehost” plugin - Automated configurable vHost setting on connect.
Some core changes will break protocol modules and plugins written for older PyLink versions:
- Some functions have been renamed:
  - utils.nickToUid(irc, nick) -> irc.nickToUid(nick)
  - utils.isInternalClient(irc, uid) -> irc.isInternalClient(uid)
  - utils.isInternalServer(irc, uid) -> irc.isInternalServer(uid)
  - utils.clientToServer(irc, uid) -> utils.getServer(uid)
  - utils.getProtoModule(...) -> utils.getProtocolModule(...)
- Protocol specification is rewritten, with “Client” and “Server” dropped from the suffix of most outgoing commands: see acdd7dbb782765f581…2fd0a8ae741a663d.
exec plugin: add inject and raw commands (4e7396b).
exec plugin: support newline (and other) escapes in exec (375dbe8).
protocols: allow changing remote users’ hosts in updateClient (741fed9).
Speed up and clean up shutdown sequence, fixing hangs due to sockets not shutting down cleanly (#152).
protocols/unreal: Support cloaking with user mode +x (#136).
Various bug fixes - see https://github.com/jlu5/PyLink/compare/0.5-dev…0.6.0-dev for a full diff.

PyLink 0.5-dev

Tagged as 0.5-dev by jlu5 on 2015-12-06T17:54:02Z

The “We’re getting somewhere…” release.

Changes

Bug fixes, all the bug fixes.

Core

Support IPv6 connections in config.
The offending hook data is now logged whenever a hook function errors, for more convenient debugging.
Add sanity checks for autoconnect - delay has to be at least 1 second now, to prevent connect floods that go on without any delay in between!
Add irc.reply() to send command replies to callers in the right context (channel or PM).
More base commands are in coreplugin instead of commands.py now, making the latter reloadable without restart.
Don’t crash when REHASH loads a config file that’s invalid.
utils: Replace imp (deprecated) with importlib.

Plugins

commands: Add a command to set log level (#124).
commands: Update irc.botdata (bot: data in config) in REHASH.
fantasy: Support nick prefixes (e.g. PyLink: help), along with a configurable prefix.

Protocols

protocols/TS6: Fix SQUIT handling and introduction of SID-less servers (i.e. atheme’s /os JUPE) (#119)
protocols/unreal: Add (experimental) support for UnrealIRCd 4.0.x!
plugins: More complete INFO logging: plugin loading/unloading, unknown commands called, successful operups

Full diff:https://github.com/jlu5/PyLink/compare/0.4.6-dev…0.5-dev

PyLink 0.4.6-dev

Tagged as 0.4.6-dev by jlu5 on 2015-10-01T23:44:20Z

Bugfix release:

f20e677577 relay: fix PMs across the relay (7d919e6 regression)
55d9eb240f classes.Irc: prettier repr

PyLink 0.4.5-dev

Tagged as 0.4.5-dev by jlu5 on 2015-09-30T04:14:22Z

The “fancy stuff!” release.

New features including in-place config reloading (rehashing) (#89), FANTASY support (#111), and plugin (re/un)loading without a restart.

Full diff since 0.4.0-dev: https://github.com/jlu5/PyLink/compare/0.4.0-dev…0.4.5-dev

PyLink 0.3.50-dev

Tagged as 0.3.50-dev by jlu5 on 2015-09-19T18:28:24Z

Many updates to core, preparing for an (eventual) 0.4.x release. Commits:

63189e9 relay: look at the right prefix mode list when rejoining from KILL
cb83db4 relay: don’t allow creating a channel that’s already part of a relay
8faf86a relay: rejoin killed users to the RIGHT channels
2e0a5e5 utils.parseModes: fix IndexError on empty query
1f95774 inspircd: add proper fallback value for OPERTYPE?
d6cb9d4 Merge commit ‘320de2079a78202e99c7b6aeb53c28c13f43ba47’
320de20 relay: add INVITE support (Closes #94)
60dc3fe relay: use “Channel delinked.” part message when delinking channels
9a47ff8 Merge branch ‘master’ into devel
ace0ddf relay: use JOIN instead of SJOIN for non-burst joins
c2ee9ef Merge branch ‘master’ into devel
19fa31d relay: fix incorrect logging in getSupportedUmodes()
2f760c8 relay: Don’t send empty user mode changes
4f40fae relay: in logs, be a bit more specific why we’re blocking KILLs and KICKs
0b590d6 relay/protocols: use utils.toLower() for channel names, respecting IRCd casemappings
4525b81 relay.handle_kill: prevent yet another RuntimeError
26e102f Show oper types on WHOIS
8d19057 relay: set umode +H (hideoper) on all remote opered clients
5480ae1 classes: Remove “opertype” IrcUser() argument
531ebbb Merge branch ‘master’ into devel
f9b4457 Decorate relay clients, etc. with custom OPERTYPEs
4a964b1 Merge branch ‘master’ into devel
1062e47 classes.IrcChannel: default modes to +nt on join
d270a18 Remove unused imports
94f83eb relay.showuser: show home network/nick, and relay nicks regardless of oper status
5503477 commands: distinguish commands with multiple binds in ‘list’
8976322 Replace admin.showuser with prettier whois-style cmds in ‘commands’ and ‘relay’
e1e31f6 Allow multiple plugins to bind to one command name!
afd6d8c Refactor conf loading; skip the file-loading parts entirely for tests (#56)
cda54c7 main: Fix b71e508.
a58bee7 Modularize tests using common classes, add our custom test runner (#56)
549a1d1 classes: IrcServer.users is now a set()
adb9ef1 classes: fixes for the test API
973aba6 Move utils’ global variables to world.py
b71e508 classes.Irc no longer needs a conf argument; tweak tests again
ad5fc97 Many fixes to test API, utils.reverseModes stub
ab4cb4d Merge branch ‘master’ into devel
2fe9b62 Consistently capitalize errors and other messages
bc7765b Let’s use consistent “Unknown command” errors, right?
d059bd4 Move ‘exec’ command into its separate plugin
3d621b0 Move checkAuthenticated() to utils, and give it and isOper() toggles for allowing oper/PyLink logins
090fa85 Move Irc() from main.py to classes.py

PyLink 0.3.1-dev

Tagged as 0.3.1-dev by jlu5 on 2015-09-03T06:56:48Z

Bugfix release + LINKACL support for relay. Commits since 0.3.0-dev:

043fccf447 Fix previous commit (Closes #100)
708d949164 relay: join remote users before sending ours
8d44830d5c relay.handle_kill: prevent yet another RuntimeError
6d6606900e relay: coerse “/” to “|” in nicks if “/” isn’t present in the separator
c8e7b72065 protocols: lowercase channel names in PRIVMSG handling
37eecd7d69 pr/inspircd: use OPERTYPE to oper up clients correctly, and handle the metadata accordingly 9f0f4cb124 relay: burst the right set of modes
7620cd7433 pr/inspircd: fix compatibility with channel mode +q (~)
3523f8f766 LINKACL support
51389b96e2 relay: LINKACL command (Closes #88)

PyLink 0.2.5-dev

Tagged as 0.2.5-dev by jlu5 on 2015-08-16T05:39:34Z

See the diff for this development build: https://github.com/jlu5/PyLink/compare/0.2.3-dev…0.2.5-dev

PyLink 0.2.3-dev

Tagged as 0.2.3-dev by jlu5 on 2015-07-26T06:11:20Z

The “prevent PyLink from wrecking my server’s CPU” release.

Mostly bug fixes here, with a couple of scripts added (start-cpulimit.sh and kill.sh) added to assist running PyLink under the protection of CPUlimit. :)

New features

relay: Block most duplicate modes from being relayed (#71)
main: write a PID file to pylink.pid (f85fbd934b)
ts6: support +AOS charybdis extension modes, warning if the IRCd doesn’t support them (146ab5e)

Fixes

relay: quit users who aren’t on any shared channels after KICK (71a3464)
Use RFC1459 for case mapping on InspIRCd (01220b3)
relay: Fix handling of local SAVE (e4da670) and KILL (a4da9b5) commands
relay: fix nick collision loop on SAVE + when both tagged (i.e. _42XAAAAAA) and untagged (42XAAAAAA) versions of a UID nick exist (e354ada)
relay: Fix command arguments of DELINK on home networks (c07cfb1)
relay: SJOIN users once, and only once (#71, b681a67)
main.Irc: catch OSError (bad file descriptor) errors and disconnect
ts6: add QS as a required capability (69e16e5)
ts6: fix JOIN handling and parse_as key handling in hooks (ddefd38)
relay: only wait for irc.connected once per network (4d7d7ce)

Full diff: https://github.com/jlu5/PyLink/compare/0.2.2-dev…0.2.3-dev

PyLink 0.2.2-dev

Tagged as 0.2.2-dev by jlu5 on 2015-07-24T18:09:44Z

The “please don’t break again :(” release.

Added WHOIS handling support for TS6 IRCds.
ts6: fix handling of SID, CHGHOST, and SQUIT commands.
Support noctcp (mode +C) on charybdis, and wallops (+w) in relay.
Raised fallback ping frequency to 30

…And of course, lots and lots of bug fixes; I won’t bother to list them all.

Full diff: https://github.com/jlu5/PyLink/compare/0.2.0-dev…0.2.2-dev

PyLink 0.2.0-dev

Tagged as 0.2.0-dev by jlu5 on 2015-07-23T04:44:17Z

Many changes in this development release, including:

New ts6 protocol module, for charybdis 3.x.
relay: add nick collision handling via SAVE (#61).
relay: trivial tasks like TOPIC, MODE, KICK and PART no longer spawn new clients for their senders, and are routed through the pseudoserver when applicable instead (e76d31d c0f8259).
Irc: be safer against UnicodeDecodeError caused by socket.recv() cutoff, by decoding each individual line instead (06d17d5).
relay: make the nick/net separator a per-network config option. (ad34f6c).
relay: Use a whitelist when it comes to relaying modes (#54), and strip out bans that don’t match nick!user@host syntax (#55).
relay: Handle user mode changes (#64).
Support different case mappings for nicknames (RFC1459 vs ASCII) (#75).
inspircd: remove RSQUIT command handler (3494d4f).

And of course, many, many bug fixes! (relay should now work properly with more than 2 networks, for example…)

Full diff: https://github.com/jlu5/PyLink/compare/0.1.6-dev…0.2.0-dev

PyLink 0.1.6-dev

Tagged as 0.1.6-dev by jlu5 on 2015-07-20T06:09:40Z

Bug fixes and improvements from 0.1.5-dev

Irc.send: catch AttributeError when self.socket doesn’t exist; i.e. when initial connection fails (b627513)
Log output to log/pylink.log, along with console (#52, 61804b1 fbc2fbf)
main/coreplugin: use log.exception() instead of traceback.print_exc(), so logs aren’t only printed to screen (536366d)
relay: don’t relay messages sent to the PyLink client (688675d)
relay: add a save command, and make rescheduling optional in exportDB() (c00da49)
utils: add getHostmask() (1b09a00)
various: Log command usage, exec usage, successful logins, and access denied errors in admin.py’s commands (57e9bf6)

Full diff: https://github.com/jlu5/PyLink/compare/0.1.5-dev…0.1.6-dev

PyLink 0.1.5-dev

Tagged as 0.1.5-dev by jlu5 on 2015-07-18T20:01:39Z

New features

Hooks for CHGHOST, CHGIDENT, and CHGNAME (f9d8215 35f1c88)
IrcUser: Implement user channel tracking via an IrcUser.channels attribute (d97fce8)
Send PING to our uplink periodically, and quit if we don’t get a response (#42, #57)
- New server pingfreq option is introduced to set the time between PINGs.
relay: Only spawn clients if they share a channel, and quit them when they leave all shared channels (cf32461)
Support autoreconnecting to networks! A new autoconnect server setting is added to set autoconnect delay.
New PYLINK_DISCONNECT hook to keep track of network disconnections (3f6f78b)
relay: add a LINKED command (#65, bbcd70b)
commands: add a HELP command (#8, 6508cb3 4553eda)

Bug fixes

relay: don’t spawn tagged clones for the internal PyLink client (40fd9e3)
relay: don’t send empty MODE commands if there are no supported modes left after filtering (2a586a6)
protocol/inspircd: don’t raise KeyError when removing channel from user fails (73c625a)
relay: only join PyLink to channels & set topics if there’s actually a relay on the network (49943a7)
relay: fix the wrong modes being propagated to the wrong channels on LINK (#53, ccf7596)
relay: fix “RuntimeError: dictionary changed size during iteration” in handle_part (d30890c)
relay: Only allow messaging users in common channels / channels that you’re in (#62, 024ac16)

Misc. changes

Move client/server spawning, hook calling, command handling, and KILL/KICK detection outside the protocol module (0aa2f98 fdea348)
Fix fakeirc and tests for relay (#56, a51cfcb)

Removed features

commands: remove debug command; it’s useless now that exec, showchan, and showuser exist (50665ec)
admin: tell command has been removed. Rationale: limited usefulness; doesn’t wrap long messages properly. (4553eda)

You can view the full diff here: https://github.com/jlu5/PyLink/compare/0.1.0-dev…0.1.5-dev

PyLink 0.1.0-dev

Tagged as 0.1.0-dev by jlu5 on 2015-07-16T06:27:12Z

PyLink’s first pre-alpha development snapshot.

Working protocol modules: - InspIRCd 2.0.x - inspircd

Working plugins: - admin - hooks - commands - relay

132 KiB Raw Permalink Blame History Unescape Escape

PyLink 3.1.0 (2023-01-03)

Feature changes

Bug fixes

PyLink 3.1-beta1 (2021-12-30)

Feature changes

Bug fixes

Internal improvements

PyLink 3.0.0 (2020-04-11)

PyLink 3.0-rc1 (2020-02-22)

Major changes since PyLink 2.0.x

API changes

Changes since PyLink 2.1-beta1

Feature changes

Bug fixes

Documentation changes

Internal improvements

PyLink 2.1-beta1 (2019-12-08)

Feature changes

Bug fixes

Internal improvements

PyLink 2.1-alpha2 (2019-07-14)

Feature changes

Bug fixes

Internal improvements

PyLink 2.1-alpha1 (2019-05-02)

Feature changes

Bug fixes

Internal improvements

PyLink 2.0.3 (2019-10-11)

Feature changes

Bug fixes

PyLink 2.0.2 (2019-03-31)

Feature changes

Bug fixes

Internal improvements

PyLink 2.0.1 (2018-10-06)

Feature changes

Bug fixes

Internal improvements

PyLink 2.0.0 (2018-07-31)

PyLink 2.0-rc1 (2018-07-18)

New features

Feature changes

Bug fixes

Internal improvements

Changes in this RC build

Bug fixes

Documentation updates

PyLink 2.0-beta1 (2018-06-27)

New features

Feature changes

Bug fixes

Internal changes

PyLink 2.0-alpha3 (2018-05-10)

New features

Feature changes

Bug fixes

Internal improvements

PyLink 2.0-alpha2 (2018-01-16)

New features

Backwards incompatible changes

Bug fixes

Internal improvements

PyLink 2.0-alpha1 (2017-10-07)

New features

Backwards incompatible changes

Bug fixes

Internal changes

PyLink 1.3.0 (2018-05-08)

PyLink 1.3-beta1 (2018-04-07)

New features

Bug fixes

Misc changes

PyLink 1.2.1 (2017-09-19)

Bug fixes

Misc changes

Internal improvements

PyLink 1.2.0 (2017-08-14)

Feature changes

132 KiB

Raw Permalink Blame History