Updated master config file to 2014.7

Fixed explanations, and improved logic code to client_acl

salt/files/master.d/_defaults.conf

@@ -21,25 +21,27 @@
 
 # Per default, the master will automatically include all config files
 # from master.d/*.conf (master.d is a directory in the same directory
-# as the main master config file)
+# as the main master config file).
 {{ get_config('default_include', 'master.d/*.conf') }}
 
-# The address of the interface to bind to
+# The address of the interface to bind to:
 {{ get_config('interface', '0.0.0.0') }}
 
 # Whether the master should listen for IPv6 connections. If this is set to True,
-# the interface option must be adjusted too (for example: "interface: '::'")
+# the interface option must be adjusted, too. (For example: "interface: '::'")
 {{ get_config('ipv6', 'False') }}
 
-# The tcp port used by the publisher
+# The tcp port used by the publisher:
 {{ get_config('publish_port', '4505') }}
 
-# The user to run the salt-master as. Salt will update all permissions to
+# The user under which the salt master will run. Salt will update all
-# allow the specified user to run the master. If the modified files cause
+# permissions to allow the specified user to run the master. The exception is
-# conflicts set verify_env to False.
+# the job cache, which must be deleted if this user is changed. If the
+# modified files cause conflicts, set verify_env to False.
 {{ get_config('user', 'root') }}
 
 # Max open files
+#
 # Each minion connecting to the master uses AT LEAST one file descriptor, the
 # master subscription connection. If enough minions connect you might start
 # seeing on the console (and then salt-master crashes):
@@ -52,42 +54,47 @@
 # If you wish to set a different value than the default one, uncomment and
 # configure this setting. Remember that this value CANNOT be higher than the
 # hard limit. Raising the hard limit depends on your OS and/or distribution,
-# a good way to find the limit is to search the internet for(for example):
+# a good way to find the limit is to search the internet. For example:
 #   raise max open files hard limit debian
 #
 {{ get_config('max_open_files', '100000') }}
 
-# The number of worker threads to start, these threads are used to manage
+# The number of worker threads to start. These threads are used to manage
-# return calls made from minions to the master, if the master seems to be
+# return calls made from minions to the master. If the master seems to be
-# running slowly, increase the number of threads
+# running slowly, increase the number of threads.
 {{ get_config('worker_threads', '5') }}
 
 # The port used by the communication interface. The ret (return) port is the
-# interface used for the file server, authentication, job returnes, etc.
+# interface used for the file server, authentication, job returns, etc.
 {{ get_config('ret_port', '4506') }}
 
-# Specify the location of the daemon process ID file
+# Specify the location of the daemon process ID file:
 {{ get_config('pidfile', '/var/run/salt-master.pid') }}
 
 # The root directory prepended to these options: pki_dir, cachedir,
 # sock_dir, log_file, autosign_file, autoreject_file, extension_modules,
-# key_logfile, pidfile.
+# key_logfile, pidfile:
 {{ get_config('root_dir', '/') }}
 
-# Directory used to store public key data
+# Directory used to store public key data:
 {{ get_config('pki_dir', '/etc/salt/pki/master') }}
 
-# Directory to store job and cache data
+# Directory to store job and cache data:
 {{ get_config('cachedir', '/var/cache/salt/master') }}
 
-# Verify and set permissions on configuration directories at startup
+# Directory for custom modules. This directory can contain subdirectories for
+# each of Salt's module types such as "runners", "output", "wheel", "modules",
+# "states", "returners", etc.
+{{ get_config('extension_modules', '<no default>') }}
+
+# Verify and set permissions on configuration directories at startup:
 {{ get_config('verify_env', 'True') }}
 
-# Set the number of hours to keep old job information in the job cache
+# Set the number of hours to keep old job information in the job cache:
 {{ get_config('keep_jobs', '24') }}
 
-# Set the default timeout for the salt command and api, the default is 5
+# Set the default timeout for the salt command and api. The default is 5
-# seconds
+# seconds.
 {{ get_config('timeout', '5') }}
 
 # The loop_interval option controls the seconds for the master's maintenance
@@ -95,39 +102,127 @@
 # job cache and executes the scheduler.
 {{ get_config('loop_interval', '60') }}
 
-# Set the default outputter used by the salt command. The default is "nested"
+# Set the default outputter used by the salt command. The default is "nested".
 {{ get_config('output', 'nested') }}
 
-# By default output is colored, to disable colored output set the color value
+# Return minions that timeout when running commands like test.ping
-# to False
+{{ get_config('show_timeout', 'True') }}
+
+# By default, output is colored. To disable colored output, set the color value
+# to False.
 {{ get_config('color', 'True') }}
 
-# Set the directory used to hold unix sockets
+# Do not strip off the colored output from nested results and state outputs
+# (true by default).
+{{ get_config('strip_colors', 'False') }}
+
+# Set the directory used to hold unix sockets:
 {{ get_config('sock_dir', '/var/run/salt/master') }}
 
 # The master can take a while to start up when lspci and/or dmidecode is used
 # to populate the grains for the master. Enable if you want to see GPU hardware
 # data for your master.
-#
 {{ get_config('enable_gpu_grains', 'False') }}
 
-# The master maintains a job cache, while this is a great addition it can be
+# The master maintains a job cache. While this is a great addition, it can be
 # a burden on the master for larger deployments (over 5000 minions).
 # Disabling the job cache will make previously executed jobs unavailable to
 # the jobs system and is not generally recommended.
-#
 {{ get_config('job_cache', 'True') }}
 
 # Cache minion grains and pillar data in the cachedir.
 {{ get_config('minion_data_cache', 'True') }}
 
+# Store all returns in the given returner.
+# Setting this option requires that any returner-specific configuration also 
+# be set. See various returners in salt/returners for details on required
+# configuration values. (See also, event_return_queue below.)
+#
+{{ get_config('event_return', 'mysql') }}
+
+# On busy systems, enabling event_returns can cause a considerable load on
+# the storage system for returners. Events can be queued on the master and
+# stored in a batched fashion using a single transaction for multiple events.
+# By default, events are not queued.
+{{ get_config('event_return_queue', '0') }}
+
+# Only events returns matching tags in a whitelist
+{% if 'event_return_whitelist' in master -%}
+event_return_whitelist:
+  {%- for event_return in event_return_whitelist %}
+  - {{ event_return }}
+  {%- endfor -%}
+{% elif 'event_return_whitelist' in salt -%}
+event_return_whitelist:
+  {%- for event_return in event_return_whitelist %}
+  - {{ event_return }}
+  {%- endfor -%}
+{% else -%}
+# event_return_whitelist:
+#   - salt/master/a_tag
+#   - salt/master/another_tag
+{% endif %}
+
+# Store all event returns _except_ the tags in a blacklist
+{% if 'event_return_blacklist' in master -%}
+event_return_blacklist:
+  {%- for event_return in event_return_blacklist %}
+  - {{ event_return }}
+  {%- endfor -%}
+{% elif 'event_return_blacklist' in salt -%}
+event_return_blacklist:
+  {%- for event_return in event_return_blacklist %}
+  - {{ event_return }}
+  {%- endfor -%}
+{% else -%}
+# event_return_blacklist:
+#   - salt/master/not_this_tag
+#   - salt/master/or_this_one
+
+{% endif %}
+
+# Passing very large events can cause the minion to consume large amounts of
+# memory. This value tunes the maximum size of a message allowed onto the
+# master event bus. The value is expressed in bytes.
+{{ get_config('max_event_size', '1048576') }}
+
+# By default, the master AES key rotates every 24 hours. The next command
+# following a key rotation will trigger a key refresh from the minion which may
+# result in minions which do not respond to the first command after a key refresh.
+#
+# To tell the master to ping all minions immediately after an AES key refresh, set
+# ping_on_rotate to True. This should mitigate the issue where a minion does not
+# appear to initially respond after a key is rotated.
+#
+# Note that ping_on_rotate may cause high load on the master immediately after
+# the key rotation event as minions reconnect. Consider this carefully if this
+# salt master is managing a large number of minions.
+#
+# If disabled, it is recommended to handle this event by listening for the 
+# 'aes_key_rotate' event with the 'key' tag and acting appropriately.
+{{ get_config('ping_on_rotate', 'False') }}
+
+# By default, the master deletes its cache of minion data when the key for that
+# minion is removed. To preserve the cache after key deletion, set 
+# 'preserve_minion_cache' to True.
+#
+# WARNING: This may have security implications if compromised minions auth with
+# a previous deleted minion ID.
+{{ get_config('preserve_minion_cache', 'False') }}
+
+# If max_minions is used in large installations, the master might experience
+# high-load situations because of having to check the number of connected
+# minions for every authentication. This cache provides the minion-ids of
+# all connected minions to all MWorker-processes and greatly improves the
+# performance of max_minions.
+{{ get_config('con_cache', 'False') }}
+
 # The master can include configuration from other files. To enable this,
 # pass a list of paths to this option. The paths can be either relative or
 # absolute; if relative, they are considered to be relative to the directory
 # the main master configuration file lives in (this file). Paths can make use
 # of shell-style globbing. If no files are matched by a path passed to this
-# option then the master will log a warning message.
+# option, then the master will log a warning message.
-#
 #
 # Include a config file from some other path:
 # include: /etc/salt/extra_config
@@ -137,7 +232,6 @@
 #   - /etc/salt/extra_config
 {{ get_config('include', '[]') }}
 
-
 #####        Security settings       #####
 ##########################################
 # Enable "open mode", this mode still maintains encryption, but turns off
@@ -150,6 +244,12 @@
 # public keys from the minions. Note that this is insecure.
 {{ get_config('auto_accept', 'False') }}
 
+# Time in minutes that a incoming public key with a matching name found in
+# pki_dir/minion_autosign/keyid is automatically accepted. Expired autosign keys
+# are removed when the master checks the minion_autosign directory.
+# 0 equals no timeout
+{{ get_config('autosign_timeout', '120') }}
+
 # If the autosign_file is specified, incoming keys specified in the
 # autosign_file will be automatically accepted. This is insecure.  Regular
 # expressions as well as globing lines are supported.
@@ -158,34 +258,52 @@
 # Works like autosign_file, but instead allows you to specify minion IDs for
 # which keys will automatically be rejected. Will override both membership in
 # the autosign_file and the auto_accept setting.
-{{ get_config('autoreject_file', '/etc/salt/autosign.conf') }}
+{{ get_config('autoreject_file', '/etc/salt/autoreject.conf') }}
 
 # Enable permissive access to the salt keys. This allows you to run the
 # master or minion as root, but have a non-root group be given access to
 # your pki_dir. To make the access explicit, root must belong to the group
-# you've given access to.  This is potentially quite insecure.
+# you've given access to. This is potentially quite insecure. If an autosign_file
-# If an autosign_file is specified, enabling permissive_pki_access will allow group access
+# is specified, enabling permissive_pki_access will allow group access to that
-# to that specific file.
+# specific file.
 {{ get_config('permissive_pki_access', 'False') }}
 
 # Allow users on the master access to execute specific commands on minions.
 # This setting should be treated with care since it opens up execution
 # capabilities to non root users. By default this capability is completely
 # disabled.
-#
 #client_acl:
 #  larry:
 #    - test.ping
 #    - network.*
-#
+{% if 'client_acl' in master -%}
-{{ get_config('client_acl', '{}') }}
+client_acl:
+{%- for name, user in master['client_acl']|dictsort %}
+  {{ name}}:
+{%- for command in user %}
+    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
+{%- endfor -%}
+{%- endfor -%}
+{% elif 'client_acl' in salt -%}
+client_acl:
+{%- for name, user in salt['client_acl']|dictsort %}
+  {{ name }}:
+{%- for command in user %}
+    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
+{%- endfor -%}
+{%- endfor -%}
+{% else -%}
+#client_acl:
+#  larry:
+#    - test.ping
+#    - network.*
+{%- endif %}
 
 # Blacklist any of the following users or modules
 #
 # This example would blacklist all non sudo users, including root from
 # running any commands. It would also blacklist any use of the "cmd"
-# module.
+# module. This is completely disabled by default.
-# This is completely disabled by default.
 #
 {% if 'client_acl_blacklist' in master %}
 client_acl_blacklist:
@@ -216,14 +334,17 @@ client_acl_blacklist:
 #    - cmd
 {% endif %}
 
+# Enforce client_acl & client_acl_blacklist when users have sudo
+# access to the salt command. 
+#
+{{ get_config('sudo_acl', 'False') }}
+
 # The external auth system uses the Salt auth modules to authenticate and
 # validate users to access areas of the Salt system.
-#
 #external_auth:
 #  pam:
 #    fred:
 #      - test.*
-#
 {{ get_config('external_auth', '{}') }}
 
 # Time (in seconds) for a newly generated token to live. Default: 12 hours
@@ -234,8 +355,7 @@ client_acl_blacklist:
 {{ get_config('file_recv', 'False') }}
 
 # Set a hard-limit on the size of the files that can be pushed to the master.
-# It will be interpreted as megabytes.
+# It will be interpreted as megabytes. Default: 100
-# Default: 100
 {{ get_config('file_recv_max_size', '100') }}
 
 # Signature verification on messages published from the master.
@@ -249,20 +369,19 @@ client_acl_blacklist:
 # no signature, it will still be accepted, and a warning message will be logged.
 # Conversely, if sign_pub_messages is False, but a minion receives a signed
 # message it will be accepted, the signature will not be checked, and a warning message
-# will be logged.  This behavior will go away in Salt 0.17.6 (or Hydrogen RC1, whichever
+# will be logged. This behavior went away in Salt 2014.1.0 and these two situations
-# comes first) and these two situations will cause minion to throw an exception and
+# will cause minion to throw an exception and drop the message.
-# drop the message.
-#
 {{ get_config('sign_pub_message', 'False') }}
 
+
 #####    Master Module Management    #####
 ##########################################
-# Manage how master side modules are loaded
+# Manage how master side modules are loaded.
 
-# Add any additional locations to look for master runners
+# Add any additional locations to look for master runners:
 {{ get_config('runner_dirs', '[]') }}
 
-# Enable Cython for master side modules
+# Enable Cython for master side modules:
 {{ get_config('cython_enable', 'False') }}
 
 
@@ -276,6 +395,7 @@ client_acl_blacklist:
 # The master_tops option replaces the external_nodes option by creating
 # a plugable system for the generation of external top data. The external_nodes
 # option is deprecated by the master_tops option.
+#
 # To gain the capabilities of the classic external_nodes system, use the
 # following configuration:
 # master_tops:
@@ -319,10 +439,17 @@ client_acl_blacklist:
 # output for each changed state if set to 'full', but if set to 'terse'
 # the output will be shortened to a single line.  If set to 'mixed', the output
 # will be terse unless a state failed, in which case that output will be full.
+# If set to 'changes', the output will be full unless the state didn't change.
 {{ get_config('state_output', 'full') }}
 
-{{ get_config('yaml_utf8', 'False')  }}
+# Automatically aggregate all states that have support for mod_aggregate by
-
+# setting to True. Or pass a list of state module names to automatically
+# aggregate just those types.
+#
+# state_aggregate:
+#   - pkg
+#
+#state_aggregate: False
 
 #####      File Server settings      #####
 ##########################################
@@ -344,6 +471,7 @@ client_acl_blacklist:
 #   prod:
 #     - /srv/salt/prod/services
 #     - /srv/salt/prod/states
+
 {% if 'file_roots' in master -%}
 file_roots:
 {%- for name, roots in master['file_roots']|dictsort %}
@@ -366,10 +494,12 @@ file_roots:
 #    - /srv/salt
 {%- endif %}
 
-
 # The hash_type is the hash to use when discovering the hash of a file on
 # the master server. The default is md5, but sha1, sha224, sha256, sha384
 # and sha512 are also supported.
+#
+# Prior to changing this value, the master should be stopped and all Salt 
+# caches should be cleared.
 {{ get_config('hash_type', 'md5') }}
 
 # The buffer size in the file server can be adjusted here:
@@ -419,18 +549,17 @@ file_ignore_glob:
 {% endif %}
 
 # File Server Backend
+#
 # Salt supports a modular fileserver backend system, this system allows
 # the salt master to link directly to third party systems to gather and
 # manage the files available to minions. Multiple backends can be
 # configured and will be searched for the requested file in the order in which
 # they are defined here. The default setting only enables the standard backend
 # "roots" which uses the "file_roots" option.
-#
 #fileserver_backend:
 #  - roots
 #
 # To use multiple backends list them in the order they are searched:
-#
 #fileserver_backend:
 #  - git
 #  - roots
@@ -445,31 +574,27 @@ fileserver_backend:
 # symlinks when walking the filesystem tree. This is set to True
 # by default. Currently this only applies to the default roots
 # fileserver_backend.
-#
 {{ get_config('fileserver_followsymlinks', 'False') }}
 #
 # Uncomment the line below if you do not want symlinks to be
 # treated as the files they are pointing to. By default this is set to
 # False. By uncommenting the line below, any detected symlink while listing
 # files on the Master will not be returned to the Minion.
-#
 {{ get_config('fileserver_ignoresymlinks', 'True') }}
-
 #
 # By default, the Salt fileserver recurses fully into all defined environments
 # to attempt to find files. To limit this behavior so that the fileserver only
 # traverses directories with SLS files and special Salt directories like _modules,
 # enable the option below. This might be useful for installations where a file root
 # has a very large number of files and performance is impacted. Default is False.
-#
 {{ get_config('fileserver_limit_traversal', 'False') }}
 #
 # The fileserver can fire events off every time the fileserver is updated,
 # these are disabled by default, but can be easily turned on by setting this
 # flag to True
 {{ get_config('fileserver_events', 'False') }}
-#
+
-# Git fileserver backend configuration
+# Git File Server Backend Configuration
 #
 # Gitfs can be provided by one of two python modules: GitPython or pygit2. If
 # using pygit2, both libgit2 and git must also be installed.
@@ -501,7 +626,7 @@ gitfs_remotes:
 {%- endif -%}
 {%- endfor -%}
 {%- endif %}
-#
+
 #gitfs_remotes:
 #  - git://github.com/saltstack/salt-states.git
 #  - file:///var/git/saltmaster
@@ -513,7 +638,6 @@ gitfs_remotes:
 # is a security concern, you may want to try using the ssh transport.
 {{ get_config('gitfs_ssl_verify', 'True') }}
 #
-#
 # The gitfs_root option gives the ability to serve files from a subdirectory
 # within the repository. The path is defined relative to the root of the
 # repository and defaults to the repository root.
@@ -548,7 +672,7 @@ pillar_roots:
 #  base:
 #    - /srv/pillar
 {% endif %}
-
+#
 {% if 'ext_pillar' in master %}
 ext_pillar:
 {% for pillar in master['ext_pillar'] %}
@@ -565,6 +689,11 @@ ext_pillar:
 #  - cmd_yaml: cat /etc/salt/yaml
 {% endif %}
 
+# The ext_pillar_first option allows for external pillar sources to populate
+# before file system pillar. This allows for targeting file system pillar from
+# ext_pillar.
+{{ get_config('ext_pillar_first', 'False') }}
+
 # The pillar_gitfs_ssl_verify option specifies whether to ignore ssl certificate
 # errors when contacting the pillar gitfs backend. You might want to set this to
 # false if you're using a git backend that uses a self-signed certificate but
@@ -595,13 +724,13 @@ ext_pillar:
 # this master where to receive commands from.
 {{ get_config('syndic_master', 'masterofmaster') }}
 
-# This is the 'ret_port' of the MasterOfMaster
+# This is the 'ret_port' of the MasterOfMaster:
 {{ get_config('syndic_master_port', '4506') }}
 
-# PID file of the syndic daemon
+# PID file of the syndic daemon:
 {{ get_config('syndic_pidfile', '/var/run/salt-syndic.pid') }}
 
-# LOG file of the syndic daemon
+# LOG file of the syndic daemon:
 {{ get_config('syndic_log_file', 'syndic.log') }}
 
 #####      Peer Publish settings     #####
@@ -615,14 +744,12 @@ ext_pillar:
 # of regular expressions to match functions. The following will allow the
 # minion authenticated as foo.example.com to execute functions from the test
 # and pkg modules.
-#
 #peer:
 #  foo.example.com:
 #    - test.*
 #    - pkg.*
 #
 # This will allow all minions to execute all commands:
-#
 #peer:
 #  .*:
 #    - .*
@@ -654,13 +781,11 @@ peer:
 #
 # All peer runner support is turned off by default and must be enabled before
 # using. This will enable all peer runners for all minions:
-#
 #peer_run:
 #  .*:
 #    - .*
 #
 # To enable just the manage.up runner for the minion foo.example.com:
-#
 #peer_run:
 #  foo.example.com:
 #    - manage.up
@@ -682,27 +807,27 @@ peer_run:
   {% endfor %}
 {% endif %}
 
+
 #####         Mine settings     #####
 ##########################################
 # Restrict mine.get access from minions. By default any minion has a full access
 # to get all mine data from master cache. In acl definion below, only pcre matches
 # are allowed.
-#
 # mine_get:
 #   .*:
 #     - .*
 #
-# Example below enables minion foo.example.com to get  'network.interfaces' mine data only
+# The example below enables minion foo.example.com to get 'network.interfaces' mine
-# , minions web* to get all network.* and disk.* mine data and all other minions won't get
+# data only, minions web* to get all network.* and disk.* mine data and all other
-# any mine data.
+# minions won't get any mine data.
-#
 # mine_get:
 #   foo.example.com:
-#     - network.inetrfaces
+#     - network.interfaces
 #   web.*:
 #     - network.*
 #     - disk.*
 
+
 #####         Logging settings       #####
 ##########################################
 # The location of the master log file
@@ -739,7 +864,7 @@ peer_run:
 # example sets the main salt library at the 'warning' level, but sets
 # 'salt.modules' to log at the 'debug' level:
 #   log_granular_levels:
-#     'salt': 'warning',
+#     'salt': 'warning'
 #     'salt.modules': 'debug'
 #
 {% if 'log_granular_levels' in master %}
@@ -759,9 +884,8 @@ log_granular_levels:
 
 #####         Node Groups           #####
 ##########################################
-# Node groups allow for logical groupings of minion nodes.
+# Node groups allow for logical groupings of minion nodes. A group consists of a group
-# A group consists of a group name and a compound target.
+# name and a compound target.
-#
 #nodegroups:
 #  group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com and bl*.domain.com'
 #  group2: 'G@os:Debian and foo.domain.com'
@@ -781,20 +905,19 @@ nodegroups:
 #####     Range Cluster settings     #####
 ##########################################
 # The range server (and optional port) that serves your cluster information
-# https://github.com/grierj/range/wiki/Introduction-to-Range-with-YAML-files
+# https://github.com/ytoolshed/range/wiki/%22yamlfile%22-module-file-spec
 #
 {{ get_config('range_server', 'range:80') }}
 
-
 #####     Windows Software Repo settings #####
 ##############################################
-# Location of the repo on the master
+# Location of the repo on the master:
 {{ get_config('win_repo', '/srv/salt/win/repo') }}
 
-# Location of the master's repo cache file
+# Location of the master's repo cache file:
 {{ get_config('win_repo_mastercachefile', '/srv/salt/win/repo/winrepo.p') }}
 
-# List of git repositories to include with the local repo
+# List of git repositories to include with the local repo:
 {% if 'win_gitrepos' in master %}
 win_gitrepos:
   {% for repo in master['win_gitrepos'] %}
@@ -810,6 +933,11 @@ win_gitrepos:
 #  - 'https://github.com/saltstack/salt-winrepo.git'
 {% endif %}
 
+#####      Returner settings          ######
+############################################
+# Which returner(s) will be used for minion's result:
+#return: mysql
+
 {% if 'halite' in master %}
 #####             Halite             #####
 ##########################################