diff --git a/salt/files/master.d/_defaults.conf b/salt/files/master.d/_defaults.conf index c3e00a6..9d363bb 100644 --- a/salt/files/master.d/_defaults.conf +++ b/salt/files/master.d/_defaults.conf @@ -21,28 +21,30 @@ # Per default, the master will automatically include all config files # from master.d/*.conf (master.d is a directory in the same directory -# as the main master config file) +# as the main master config file). {{ get_config('default_include', 'master.d/*.conf') }} -# The address of the interface to bind to +# The address of the interface to bind to: {{ get_config('interface', '0.0.0.0') }} # Whether the master should listen for IPv6 connections. If this is set to True, -# the interface option must be adjusted too (for example: "interface: '::'") +# the interface option must be adjusted, too. (For example: "interface: '::'") {{ get_config('ipv6', 'False') }} -# The tcp port used by the publisher +# The tcp port used by the publisher: {{ get_config('publish_port', '4505') }} -# The user to run the salt-master as. Salt will update all permissions to -# allow the specified user to run the master. If the modified files cause -# conflicts set verify_env to False. +# The user under which the salt master will run. Salt will update all +# permissions to allow the specified user to run the master. The exception is +# the job cache, which must be deleted if this user is changed. If the +# modified files cause conflicts, set verify_env to False. {{ get_config('user', 'root') }} # Max open files +# # Each minion connecting to the master uses AT LEAST one file descriptor, the # master subscription connection. If enough minions connect you might start -# seeing on the console(and then salt-master crashes): +# seeing on the console (and then salt-master crashes): # Too many open files (tcp_listener.cpp:335) # Aborted (core dumped) # @@ -52,42 +54,47 @@ # If you wish to set a different value than the default one, uncomment and # configure this setting. Remember that this value CANNOT be higher than the # hard limit. Raising the hard limit depends on your OS and/or distribution, -# a good way to find the limit is to search the internet for(for example): +# a good way to find the limit is to search the internet. For example: # raise max open files hard limit debian # {{ get_config('max_open_files', '100000') }} -# The number of worker threads to start, these threads are used to manage -# return calls made from minions to the master, if the master seems to be -# running slowly, increase the number of threads +# The number of worker threads to start. These threads are used to manage +# return calls made from minions to the master. If the master seems to be +# running slowly, increase the number of threads. {{ get_config('worker_threads', '5') }} # The port used by the communication interface. The ret (return) port is the -# interface used for the file server, authentication, job returnes, etc. +# interface used for the file server, authentication, job returns, etc. {{ get_config('ret_port', '4506') }} -# Specify the location of the daemon process ID file +# Specify the location of the daemon process ID file: {{ get_config('pidfile', '/var/run/salt-master.pid') }} # The root directory prepended to these options: pki_dir, cachedir, # sock_dir, log_file, autosign_file, autoreject_file, extension_modules, -# key_logfile, pidfile. +# key_logfile, pidfile: {{ get_config('root_dir', '/') }} -# Directory used to store public key data +# Directory used to store public key data: {{ get_config('pki_dir', '/etc/salt/pki/master') }} -# Directory to store job and cache data +# Directory to store job and cache data: {{ get_config('cachedir', '/var/cache/salt/master') }} -# Verify and set permissions on configuration directories at startup +# Directory for custom modules. This directory can contain subdirectories for +# each of Salt's module types such as "runners", "output", "wheel", "modules", +# "states", "returners", etc. +{{ get_config('extension_modules', '') }} + +# Verify and set permissions on configuration directories at startup: {{ get_config('verify_env', 'True') }} -# Set the number of hours to keep old job information in the job cache +# Set the number of hours to keep old job information in the job cache: {{ get_config('keep_jobs', '24') }} -# Set the default timeout for the salt command and api, the default is 5 -# seconds +# Set the default timeout for the salt command and api. The default is 5 +# seconds. {{ get_config('timeout', '5') }} # The loop_interval option controls the seconds for the master's maintenance @@ -95,49 +102,136 @@ # job cache and executes the scheduler. {{ get_config('loop_interval', '60') }} -# Set the default outputter used by the salt command. The default is "nested" +# Set the default outputter used by the salt command. The default is "nested". {{ get_config('output', 'nested') }} -# By default output is colored, to disable colored output set the color value -# to False +# Return minions that timeout when running commands like test.ping +{{ get_config('show_timeout', 'True') }} + +# By default, output is colored. To disable colored output, set the color value +# to False. {{ get_config('color', 'True') }} -# Set the directory used to hold unix sockets +# Do not strip off the colored output from nested results and state outputs +# (true by default). +{{ get_config('strip_colors', 'False') }} + +# Set the directory used to hold unix sockets: {{ get_config('sock_dir', '/var/run/salt/master') }} # The master can take a while to start up when lspci and/or dmidecode is used # to populate the grains for the master. Enable if you want to see GPU hardware # data for your master. -# {{ get_config('enable_gpu_grains', 'False') }} -# The master maintains a job cache, while this is a great addition it can be +# The master maintains a job cache. While this is a great addition, it can be # a burden on the master for larger deployments (over 5000 minions). # Disabling the job cache will make previously executed jobs unavailable to # the jobs system and is not generally recommended. -# {{ get_config('job_cache', 'True') }} # Cache minion grains and pillar data in the cachedir. {{ get_config('minion_data_cache', 'True') }} +# Store all returns in the given returner. +# Setting this option requires that any returner-specific configuration also +# be set. See various returners in salt/returners for details on required +# configuration values. (See also, event_return_queue below.) +# +{{ get_config('event_return', 'mysql') }} + +# On busy systems, enabling event_returns can cause a considerable load on +# the storage system for returners. Events can be queued on the master and +# stored in a batched fashion using a single transaction for multiple events. +# By default, events are not queued. +{{ get_config('event_return_queue', '0') }} + +# Only events returns matching tags in a whitelist +{% if 'event_return_whitelist' in master -%} +event_return_whitelist: + {%- for event_return in event_return_whitelist %} + - {{ event_return }} + {%- endfor -%} +{% elif 'event_return_whitelist' in salt -%} +event_return_whitelist: + {%- for event_return in event_return_whitelist %} + - {{ event_return }} + {%- endfor -%} +{% else -%} +# event_return_whitelist: +# - salt/master/a_tag +# - salt/master/another_tag +{% endif %} + +# Store all event returns _except_ the tags in a blacklist +{% if 'event_return_blacklist' in master -%} +event_return_blacklist: + {%- for event_return in event_return_blacklist %} + - {{ event_return }} + {%- endfor -%} +{% elif 'event_return_blacklist' in salt -%} +event_return_blacklist: + {%- for event_return in event_return_blacklist %} + - {{ event_return }} + {%- endfor -%} +{% else -%} +# event_return_blacklist: +# - salt/master/not_this_tag +# - salt/master/or_this_one + +{% endif %} + +# Passing very large events can cause the minion to consume large amounts of +# memory. This value tunes the maximum size of a message allowed onto the +# master event bus. The value is expressed in bytes. +{{ get_config('max_event_size', '1048576') }} + +# By default, the master AES key rotates every 24 hours. The next command +# following a key rotation will trigger a key refresh from the minion which may +# result in minions which do not respond to the first command after a key refresh. +# +# To tell the master to ping all minions immediately after an AES key refresh, set +# ping_on_rotate to True. This should mitigate the issue where a minion does not +# appear to initially respond after a key is rotated. +# +# Note that ping_on_rotate may cause high load on the master immediately after +# the key rotation event as minions reconnect. Consider this carefully if this +# salt master is managing a large number of minions. +# +# If disabled, it is recommended to handle this event by listening for the +# 'aes_key_rotate' event with the 'key' tag and acting appropriately. +{{ get_config('ping_on_rotate', 'False') }} + +# By default, the master deletes its cache of minion data when the key for that +# minion is removed. To preserve the cache after key deletion, set +# 'preserve_minion_cache' to True. +# +# WARNING: This may have security implications if compromised minions auth with +# a previous deleted minion ID. +{{ get_config('preserve_minion_cache', 'False') }} + +# If max_minions is used in large installations, the master might experience +# high-load situations because of having to check the number of connected +# minions for every authentication. This cache provides the minion-ids of +# all connected minions to all MWorker-processes and greatly improves the +# performance of max_minions. +{{ get_config('con_cache', 'False') }} + # The master can include configuration from other files. To enable this, # pass a list of paths to this option. The paths can be either relative or # absolute; if relative, they are considered to be relative to the directory # the main master configuration file lives in (this file). Paths can make use # of shell-style globbing. If no files are matched by a path passed to this -# option then the master will log a warning message. -# +# option, then the master will log a warning message. # # Include a config file from some other path: -#include: /etc/salt/extra_config +# include: /etc/salt/extra_config # # Include config from several files and directories: -#include: -# - /etc/salt/extra_config +# include: +# - /etc/salt/extra_config {{ get_config('include', '[]') }} - ##### Security settings ##### ########################################## # Enable "open mode", this mode still maintains encryption, but turns off @@ -150,6 +244,12 @@ # public keys from the minions. Note that this is insecure. {{ get_config('auto_accept', 'False') }} +# Time in minutes that a incoming public key with a matching name found in +# pki_dir/minion_autosign/keyid is automatically accepted. Expired autosign keys +# are removed when the master checks the minion_autosign directory. +# 0 equals no timeout +{{ get_config('autosign_timeout', '120') }} + # If the autosign_file is specified, incoming keys specified in the # autosign_file will be automatically accepted. This is insecure. Regular # expressions as well as globing lines are supported. @@ -158,34 +258,52 @@ # Works like autosign_file, but instead allows you to specify minion IDs for # which keys will automatically be rejected. Will override both membership in # the autosign_file and the auto_accept setting. -{{ get_config('autoreject_file', '/etc/salt/autosign.conf') }} +{{ get_config('autoreject_file', '/etc/salt/autoreject.conf') }} -# Enable permissive access to the salt keys. This allows you to run the +# Enable permissive access to the salt keys. This allows you to run the # master or minion as root, but have a non-root group be given access to -# your pki_dir. To make the access explicit, root must belong to the group -# you've given access to. This is potentially quite insecure. -# If an autosign_file is specified, enabling permissive_pki_access will allow group access -# to that specific file. +# your pki_dir. To make the access explicit, root must belong to the group +# you've given access to. This is potentially quite insecure. If an autosign_file +# is specified, enabling permissive_pki_access will allow group access to that +# specific file. {{ get_config('permissive_pki_access', 'False') }} # Allow users on the master access to execute specific commands on minions. # This setting should be treated with care since it opens up execution # capabilities to non root users. By default this capability is completely # disabled. -# #client_acl: # larry: # - test.ping # - network.* -# -{{ get_config('client_acl', '{}') }} +{% if 'client_acl' in master -%} +client_acl: +{%- for name, user in master['client_acl']|dictsort %} + {{ name}}: +{%- for command in user %} + - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %} +{%- endfor -%} +{%- endfor -%} +{% elif 'client_acl' in salt -%} +client_acl: +{%- for name, user in salt['client_acl']|dictsort %} + {{ name }}: +{%- for command in user %} + - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %} +{%- endfor -%} +{%- endfor -%} +{% else -%} +#client_acl: +# larry: +# - test.ping +# - network.* +{%- endif %} # Blacklist any of the following users or modules # # This example would blacklist all non sudo users, including root from # running any commands. It would also blacklist any use of the "cmd" -# module. -# This is completely disabled by default. +# module. This is completely disabled by default. # {% if 'client_acl_blacklist' in master %} client_acl_blacklist: @@ -216,14 +334,17 @@ client_acl_blacklist: # - cmd {% endif %} +# Enforce client_acl & client_acl_blacklist when users have sudo +# access to the salt command. +# +{{ get_config('sudo_acl', 'False') }} + # The external auth system uses the Salt auth modules to authenticate and # validate users to access areas of the Salt system. -# #external_auth: # pam: # fred: # - test.* -# {{ get_config('external_auth', '{}') }} # Time (in seconds) for a newly generated token to live. Default: 12 hours @@ -234,8 +355,7 @@ client_acl_blacklist: {{ get_config('file_recv', 'False') }} # Set a hard-limit on the size of the files that can be pushed to the master. -# It will be interpreted as megabytes. -# Default: 100 +# It will be interpreted as megabytes. Default: 100 {{ get_config('file_recv_max_size', '100') }} # Signature verification on messages published from the master. @@ -249,20 +369,19 @@ client_acl_blacklist: # no signature, it will still be accepted, and a warning message will be logged. # Conversely, if sign_pub_messages is False, but a minion receives a signed # message it will be accepted, the signature will not be checked, and a warning message -# will be logged. This behavior will go away in Salt 0.17.6 (or Hydrogen RC1, whichever -# comes first) and these two situations will cause minion to throw an exception and -# drop the message. -# +# will be logged. This behavior went away in Salt 2014.1.0 and these two situations +# will cause minion to throw an exception and drop the message. {{ get_config('sign_pub_message', 'False') }} + ##### Master Module Management ##### ########################################## -# Manage how master side modules are loaded +# Manage how master side modules are loaded. -# Add any additional locations to look for master runners +# Add any additional locations to look for master runners: {{ get_config('runner_dirs', '[]') }} -# Enable Cython for master side modules +# Enable Cython for master side modules: {{ get_config('cython_enable', 'False') }} @@ -276,6 +395,7 @@ client_acl_blacklist: # The master_tops option replaces the external_nodes option by creating # a plugable system for the generation of external top data. The external_nodes # option is deprecated by the master_tops option. +# # To gain the capabilities of the classic external_nodes system, use the # following configuration: # master_tops: @@ -319,10 +439,17 @@ client_acl_blacklist: # output for each changed state if set to 'full', but if set to 'terse' # the output will be shortened to a single line. If set to 'mixed', the output # will be terse unless a state failed, in which case that output will be full. +# If set to 'changes', the output will be full unless the state didn't change. {{ get_config('state_output', 'full') }} -{{ get_config('yaml_utf8', 'False') }} - +# Automatically aggregate all states that have support for mod_aggregate by +# setting to True. Or pass a list of state module names to automatically +# aggregate just those types. +# +# state_aggregate: +# - pkg +# +#state_aggregate: False ##### File Server settings ##### ########################################## @@ -344,6 +471,7 @@ client_acl_blacklist: # prod: # - /srv/salt/prod/services # - /srv/salt/prod/states + {% if 'file_roots' in master -%} file_roots: {%- for name, roots in master['file_roots']|dictsort %} @@ -366,10 +494,12 @@ file_roots: # - /srv/salt {%- endif %} - # The hash_type is the hash to use when discovering the hash of a file on # the master server. The default is md5, but sha1, sha224, sha256, sha384 # and sha512 are also supported. +# +# Prior to changing this value, the master should be stopped and all Salt +# caches should be cleared. {{ get_config('hash_type', 'md5') }} # The buffer size in the file server can be adjusted here: @@ -419,18 +549,17 @@ file_ignore_glob: {% endif %} # File Server Backend +# # Salt supports a modular fileserver backend system, this system allows # the salt master to link directly to third party systems to gather and # manage the files available to minions. Multiple backends can be # configured and will be searched for the requested file in the order in which # they are defined here. The default setting only enables the standard backend # "roots" which uses the "file_roots" option. -# #fileserver_backend: # - roots # # To use multiple backends list them in the order they are searched: -# #fileserver_backend: # - git # - roots @@ -445,31 +574,27 @@ fileserver_backend: # symlinks when walking the filesystem tree. This is set to True # by default. Currently this only applies to the default roots # fileserver_backend. -# {{ get_config('fileserver_followsymlinks', 'False') }} # # Uncomment the line below if you do not want symlinks to be # treated as the files they are pointing to. By default this is set to # False. By uncommenting the line below, any detected symlink while listing # files on the Master will not be returned to the Minion. -# {{ get_config('fileserver_ignoresymlinks', 'True') }} - # # By default, the Salt fileserver recurses fully into all defined environments # to attempt to find files. To limit this behavior so that the fileserver only # traverses directories with SLS files and special Salt directories like _modules, # enable the option below. This might be useful for installations where a file root # has a very large number of files and performance is impacted. Default is False. -# {{ get_config('fileserver_limit_traversal', 'False') }} # # The fileserver can fire events off every time the fileserver is updated, # these are disabled by default, but can be easily turned on by setting this # flag to True {{ get_config('fileserver_events', 'False') }} -# -# Git fileserver backend configuration + +# Git File Server Backend Configuration # # Gitfs can be provided by one of two python modules: GitPython or pygit2. If # using pygit2, both libgit2 and git must also be installed. @@ -501,7 +626,7 @@ gitfs_remotes: {%- endif -%} {%- endfor -%} {%- endif %} -# + #gitfs_remotes: # - git://github.com/saltstack/salt-states.git # - file:///var/git/saltmaster @@ -513,7 +638,6 @@ gitfs_remotes: # is a security concern, you may want to try using the ssh transport. {{ get_config('gitfs_ssl_verify', 'True') }} # -# # The gitfs_root option gives the ability to serve files from a subdirectory # within the repository. The path is defined relative to the root of the # repository and defaults to the repository root. @@ -548,7 +672,7 @@ pillar_roots: # base: # - /srv/pillar {% endif %} - +# {% if 'ext_pillar' in master %} ext_pillar: {% for pillar in master['ext_pillar'] %} @@ -565,6 +689,11 @@ ext_pillar: # - cmd_yaml: cat /etc/salt/yaml {% endif %} +# The ext_pillar_first option allows for external pillar sources to populate +# before file system pillar. This allows for targeting file system pillar from +# ext_pillar. +{{ get_config('ext_pillar_first', 'False') }} + # The pillar_gitfs_ssl_verify option specifies whether to ignore ssl certificate # errors when contacting the pillar gitfs backend. You might want to set this to # false if you're using a git backend that uses a self-signed certificate but @@ -595,13 +724,13 @@ ext_pillar: # this master where to receive commands from. {{ get_config('syndic_master', 'masterofmaster') }} -# This is the 'ret_port' of the MasterOfMaster +# This is the 'ret_port' of the MasterOfMaster: {{ get_config('syndic_master_port', '4506') }} -# PID file of the syndic daemon +# PID file of the syndic daemon: {{ get_config('syndic_pidfile', '/var/run/salt-syndic.pid') }} -# LOG file of the syndic daemon +# LOG file of the syndic daemon: {{ get_config('syndic_log_file', 'syndic.log') }} ##### Peer Publish settings ##### @@ -615,14 +744,12 @@ ext_pillar: # of regular expressions to match functions. The following will allow the # minion authenticated as foo.example.com to execute functions from the test # and pkg modules. -# #peer: # foo.example.com: # - test.* # - pkg.* # # This will allow all minions to execute all commands: -# #peer: # .*: # - .* @@ -654,13 +781,11 @@ peer: # # All peer runner support is turned off by default and must be enabled before # using. This will enable all peer runners for all minions: -# #peer_run: # .*: # - .* # # To enable just the manage.up runner for the minion foo.example.com: -# #peer_run: # foo.example.com: # - manage.up @@ -682,27 +807,27 @@ peer_run: {% endfor %} {% endif %} + ##### Mine settings ##### ########################################## # Restrict mine.get access from minions. By default any minion has a full access # to get all mine data from master cache. In acl definion below, only pcre matches # are allowed. -# # mine_get: # .*: # - .* # -# Example below enables minion foo.example.com to get 'network.interfaces' mine data only -# , minions web* to get all network.* and disk.* mine data and all other minions won't get -# any mine data. -# +# The example below enables minion foo.example.com to get 'network.interfaces' mine +# data only, minions web* to get all network.* and disk.* mine data and all other +# minions won't get any mine data. # mine_get: # foo.example.com: -# - network.inetrfaces +# - network.interfaces # web.*: # - network.* # - disk.* + ##### Logging settings ##### ########################################## # The location of the master log file @@ -739,7 +864,7 @@ peer_run: # example sets the main salt library at the 'warning' level, but sets # 'salt.modules' to log at the 'debug' level: # log_granular_levels: -# 'salt': 'warning', +# 'salt': 'warning' # 'salt.modules': 'debug' # {% if 'log_granular_levels' in master %} @@ -759,9 +884,8 @@ log_granular_levels: ##### Node Groups ##### ########################################## -# Node groups allow for logical groupings of minion nodes. -# A group consists of a group name and a compound target. -# +# Node groups allow for logical groupings of minion nodes. A group consists of a group +# name and a compound target. #nodegroups: # group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com and bl*.domain.com' # group2: 'G@os:Debian and foo.domain.com' @@ -781,20 +905,19 @@ nodegroups: ##### Range Cluster settings ##### ########################################## # The range server (and optional port) that serves your cluster information -# https://github.com/grierj/range/wiki/Introduction-to-Range-with-YAML-files +# https://github.com/ytoolshed/range/wiki/%22yamlfile%22-module-file-spec # {{ get_config('range_server', 'range:80') }} - ##### Windows Software Repo settings ##### ############################################## -# Location of the repo on the master +# Location of the repo on the master: {{ get_config('win_repo', '/srv/salt/win/repo') }} -# Location of the master's repo cache file +# Location of the master's repo cache file: {{ get_config('win_repo_mastercachefile', '/srv/salt/win/repo/winrepo.p') }} -# List of git repositories to include with the local repo +# List of git repositories to include with the local repo: {% if 'win_gitrepos' in master %} win_gitrepos: {% for repo in master['win_gitrepos'] %} @@ -810,6 +933,11 @@ win_gitrepos: # - 'https://github.com/saltstack/salt-winrepo.git' {% endif %} +##### Returner settings ###### +############################################ +# Which returner(s) will be used for minion's result: +#return: mysql + {% if 'halite' in master %} ##### Halite ##### ##########################################