mikaela.github.io/blog/_posts/2015-02-24-znc160-ssl.md
2018-11-26 00:51:24 +02:00

136 lines
5.9 KiB
Markdown

---
layout: post
comments: true
title: "ZNC 1.6.0 & SSL certificate verification"
category: [english]
tags: [irc, english]
redirect_from:
- /zncssl.html
- /english/2015/02/24/znc160-ssl.html
---
**TL;DR: if you don't verify SSL certificates, don't use SSL!**
ZNC 1.6.0 was released on 2015-02-12 21:05:48Z. It brings multiple
improvements such as taking IP addresses from round-robins randomly instead
of always resolving them into same IP and most notably it actually verifies
SSL certificates.
* [Changelog](http://wiki.znc.in/ChangeLog/1.6.0)
ZNC 1.6.0 also doesn't have option to blindly accept certificates, which
would be stupid, but sadly
[Quakenet is right about most of people just accepting certificates blindly](https://www.quakenet.org/articles/99-trust-is-not-transitive-or-why-irc-over-ssl-is-pointless)
as people are asking how to disable the SSL certificate verification on
\#znc at freenode a lot.
Some people even wrote [a patch and scripts to disable the verification.](https://gist.github.com/KindOne-/52cfade7b937ee8b4c37)
This isn't a good idea as patching ZNC can cause all kinds of issues as
sometimes seen with zncstrap [1](https://github.com/ProjectFirrre/zncstrap/issues/16) [2](https://github.com/ProjectFirrre/zncstrap/issues/18) [3](https://github.com/znc/znc/issues/384).
See also [contributing (reporting bugs) guidelines of ZNC.](https://github.com/znc/znc/issues/384)
I believe same policy should apply to patching ZNC as to config files,
patch ZNC or edit config file and you will forfeit all support.
And to the subject
------------------
If you don't verify SSL certificates, you only have a false sense of
security as you let anyone between your ZNC and the IRC network. This is
called as [Man-in the middle (or shortly MITM) attack.](https://en.wikipedia.org/wiki/Man-in-the-middle_attack)
There are also people asking for ZNC to trust the certificate for the
first time and then be alerted if the certificate changes. What if the
MITM is there during your first connection attempt and then you are
alerted when the real IRC server gives you wrong certificate?
So what is the correct way?
---------------------------
* Check the website of your IRC network in case the fingerprints are
listed on their website.
* Try asking the operators of your IRC network somewhere else if you know
them (like another network or email).
* This might not be so recommended, but also check the fingerprints from
multiple locations.
> But the IRC network has hundreds of servers with different certificates!
In this case do what was recommened before ZNC 1.6.0, check some of the
servers that are geographically close to you and use them.
## Checking the fingerprint from multiple locations
I have shell function (which you can find later on this page) which I run
from multiple places:
* my home, Kotka, Finland
* [Kapsi (shell)](https://www.kapsi.fi/english.html), somewhere in Finland
* my VPS, DigitalOcean, London, the UK
```bash
# Get server SSL certificate fingerprint in MD5, SHA1 and SHA256.
# Note that OpenSSL doesn't support IPv6 at time of writing (2015-01-13).
serversslcertfp () {
SSSLCFFN=$(openssl s_client -showcerts -connect $1 < /dev/null)
# To see all validity information
echo "$SSSLCFFN"
# For getting the fingerprints
echo "$SSSLCFFN" | openssl x509 -md5 -fingerprint -noout
echo "$SSSLCFFN" | openssl x509 -sha1 -fingerprint -noout
echo "$SSSLCFFN" | openssl x509 -sha256 -fingerprint -noout
echo "$SSSLCFFN" | openssl x509 -sha512 -fingerprint -noout
unset SSSLCFFN
}
```
I hope this article has helped you to understand the issues with blindly
accepting SSL certificates or at least to understand that *if you don't
want to verify SSL certificates, don't use SSL.*
* *Updated on 2015-02-26 10:43Z: just use environment variables in the
function like suggested by @DarthGandalf on \#znc.*
## I am asked to verify fingerprint for network with valid certificate
*Added on 2015-09-03. 4. added on 2016-01-26.*
There are usually four causes for this. Lets use freenode as example
network.
1. You don't have the `ca-certificates` package installed (`ca_root_nss`
on FreeBSD), so your system trusts no certificate authority. Install it
and try again.
2. You are connecting to wrong address. freenode's certificate is valid for
\*.freenode.net, but there are CNAMEs pointing there. If you connect to
CNAME and the certificate isn't valid for that CNAME, the certificate
is invalid.
* You should always connect to either `irc.freenode.net` or
`chat.freenode.net` where it points to.
3. There is MITM which is unlikely, but unlikely is not impossible.
Validating the certificates either by trusted certificates or verifying
the fingerprints securely manually protect you from this. If MITM is the
case, you shouldn't connect.
4. You have `ca-certificates` installed, but the remote certificate is
signed by CA that is not included in it. You could try installing
system updates in case `ca-certificates` have been updated or you will
have to treat the certificate as invalid until ZNC starts supporting
it's own CA storage. See (and comment if you encounter this)
[znc/znc#909](https://github.com/znc/znc/issues/909).
* * * * *
Section added on 2018-11-10: I have started using the new option to allow
invalid SSL certificates in some cases as this post is only written with
clearnet in mind.
I am on some networks over Yggdrasil or Cjdns which already have E2EE like
Tor hidden services so as long as they are accessed directly, all benefits
of TLS are there already and TLS certificates are an additional burden as
with LetsEncrypt they will change often and LetsEncrypt doesn't support
any network I mentioned.
* * * * *
*As I seem to be updating this page more than I originally thought I should
probably add [this link to changelog here.](https://github.com/Mikaela/mikaela.github.io/commits/master/_posts/2015-02-24-znc160-ssl.md)*