The reason code field was being obtained as a uint8_t value, while it is
actually a uint16_t in little-endian byte order.
Fixes: f3cc96499c44 ("netdev: added support for SA Query")
The reason code from deauthentication frame was being obtained as a
uint8_t instead of a uint16_t. The value was only ever used in an
informational statement. Since the value was in little endian, only the
first 8 bits of the reason code were obtained. Fix that.
Fixes: 2bebb4bdc7ee ("netdev: Handle deauth frames prior to association")
Some APs don't include the RSNE in the associate reply during
the OWE exchange. This causes IWD to be incompatible since it has
a hard requirement on the AKM being included.
This relaxes the requirement for the AKM and instead warns if it
is not included.
Below is an example of an association reply without the RSN element
IEEE 802.11 Association Response, Flags: ........
Type/Subtype: Association Response (0x0001)
Frame Control Field: 0x1000
.000 0000 0011 1100 = Duration: 60 microseconds
Receiver address: 64:c4:03:88:ff:26
Destination address: 64:c4:03:88:ff:26
Transmitter address: fc:34:97:2b:1b:48
Source address: fc:34:97:2b:1b:48
BSS Id: fc:34:97:2b:1b:48
.... .... .... 0000 = Fragment number: 0
0001 1100 1000 .... = Sequence number: 456
IEEE 802.11 wireless LAN
Fixed parameters (6 bytes)
Tagged parameters (196 bytes)
Tag: Supported Rates 6(B), 9, 12(B), 18, 24(B), 36, 48, 54, [Mbit/sec]
Tag: RM Enabled Capabilities (5 octets)
Tag: Extended Capabilities (11 octets)
Ext Tag: HE Capabilities (IEEE Std 802.11ax/D3.0)
Ext Tag: HE Operation (IEEE Std 802.11ax/D3.0)
Ext Tag: MU EDCA Parameter Set
Ext Tag: HE 6GHz Band Capabilities
Ext Tag: OWE Diffie-Hellman Parameter
Tag Number: Element ID Extension (255)
Ext Tag length: 51
Ext Tag Number: OWE Diffie-Hellman Parameter (32)
Group: 384-bit random ECP group (20)
Public Key: 14ba9d8abeb2ecd5d95e6c12491b16489d1bcc303e7a7fbd…
Tag: Vendor Specific: Broadcom
Tag: Vendor Specific: Microsoft Corp.: WMM/WME: Parameter Element
Reported-By: Wen Gong <quic_wgong@quicinc.com>
Tested-By: Wen Gong <quic_wgong@quicinc.com>
Disable power save if the wiphy indicates its needed. Do this
before issuing GET_LINK so the netdev doesn't signal its up until
power save is disabled.
In try_handshake_complete() we return early if all the keys had
been installed before (initial associations). For rekeys we can
now emit the REKEY_COMPLETE event which lets AP mode reset the
rekey timer for that station.
When the TK is installed the 'ptk_installed' flag was never set to
zero. For initial associations this was fine (already zero) but for
rekeys the flag needs to be unset so try_handshake_complete knows
if the key was installed. This is consistent with how gtk/igtk keys
work as well.
The netdev_copy_tk function was being hard coded with authenticator
set to false. This isn't important for any ciphers except TKIP but
now that AP mode supports TKIP it needs to be fixed.
Both CMD_ASSOCIATE and CMD_CONNECT paths were using very similar code to
build RSN specific attributes. Use a common function to build these
attributes to cut down on duplicated code.
While here, also start using ie_rsn_cipher_suite_to_cipher instead of
assuming that the pairwise / group ciphers can only be CCMP or TKIP.
This finalizes the refactor by moving all the handshake prep
into FT itself (most was already in there). The netdev-specific
flags and state were added into netdev_ft_tx_associate which
now avoids any need for a netdev API related to FT.
The NETDEV_EVENT_FT_ROAMED event is now emitted once FT completes
(netdev_connect_ok). This did require moving the 'in_ft' flag
setting until after the keys are set into the kernel otherwise
netdev_connect_ok has no context as to if this was FT or some
other connection attempt.
In addition the prev_snonce was removed from netdev. Restoring
the snonce has no value once association begins. If association
fails it will result in a disconnect regardless which requires
a new snonce to be generated
This forwards Action, Authentication and Association frames to
ft.c via their new hooks in netdev.
Note that this will break FT-over-Air temporarily since the
auth-proto still is in use.
Currently netdev handles caching FT auth information and uses FT
parsers/auth-proto to manage the protocol. This sets up to remove
this state machine from netdev and isolate it into ft.c.
This does not break the existing auth-proto (hence the slight
modifications, which will be removed soon).
Eventually the auth-proto will be removed from FT entirely, replaced
just by an FT state machine, similar to how EAPoL works (netdev hooks
to TX/RX frames).
The warnings in the authenticate and connect events were identical
so it could be difficult knowing which print it was if IWD is not
in debug mode (to see more context). The prints were changed to
indicate which event it was and for the connect event the reason
attribute is also parsed.
Note the resp_ies_len is also initialized to zero now. After making
the changes gcc was throwing a warning.
Support for MAC address changes while powered was recently added to
mac80211. This avoids the need to power down the device which both
saves time as well as preserves any allowed frequencies which may
have been disabled if the device powered down.
The code path for changing the address was reused but now just the
'up' callback will be provided directly to l_rtnl_set_mac. Since
there aren't multiple stages of callbacks the rtnl_data structure
isn't strictly needed, but the code looks cleaner and more
consistent between the powered/non-powered code paths.
The comment/debug error print was also updated to be more general
between the two MAC change code paths.
netdev does not keep any pointers to struct scan_bss arguments that are
passed in. Make this explicitly clear by modifying the API definitions
and mark these as const.
Add extra logging around CQM events to help track wifi status. This is
useful for headless systems that can only be accessed over the network
and so information in the logs is invaluable for debugging outages.
Prior to this change, the only log for CQM messages is saying one was
received. This adds details to what attributes were set and the
associated data with them.
The signal strength log format was chosen to roughly match
wpa_supplicant's which looks like this:
CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-60 noise=-96 txrate=6000
Certain module dependencies were missing, which could cause a crash on
exit under (very unlikely) circumstances.
#0 l_queue_peek_head (queue=<optimized out>) at ../iwd-1.28/ell/queue.c:241
#1 0x0000aaaab752f2a0 in wiphy_radio_work_done (wiphy=0xaaaac3a129a0, id=6)
at ../iwd-1.28/src/wiphy.c:2013
#2 0x0000aaaab7523f50 in netdev_connect_free (netdev=netdev@entry=0xaaaac3a13db0)
at ../iwd-1.28/src/netdev.c:765
#3 0x0000aaaab7526208 in netdev_free (data=0xaaaac3a13db0) at ../iwd-1.28/src/netdev.c:909
#4 0x0000aaaab75a3924 in l_queue_clear (queue=queue@entry=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:107
#5 0x0000aaaab75a3974 in l_queue_destroy (queue=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:82
#6 0x0000aaaab7522050 in netdev_exit () at ../iwd-1.28/src/netdev.c:6653
#7 0x0000aaaab7579bb0 in iwd_modules_exit () at ../iwd-1.28/src/module.c:181
In this particular case, wiphy module was de-initialized prior to the
netdev module:
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/wiphy.c:wiphy_free() Freeing wiphy phy0[0]
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/netdev.c:netdev_free() Freeing netdev wlan0[45]
The call to netdev_rssi_level_init() in netdev_connect_common() is
currently a no-op, because netdev->connected has not yet been set at
this stage of the connection attempt. Because netdev_rssi_level_init()
is only used twice, it's been replaced by two inlined calls to
netdev_set_rssi_level_idx().
In certain rare cases IWD gets a link down event before nl80211 ever sends
a disconnect event. Netdev notifies station of the link down which causes
station to be freed, but netdev remains in the same state. Then later the
disconnect event arrives and netdev still thinks its connected, calls into
(the now freed) station object and causes a crash.
To fix this netdev_connect_free() is now called on any link down events
which will reset the netdev object to a proper state.
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/netdev.c:netdev_mlme_notify() MLME notification Del Station(20)
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/netdev.c:netdev_mlme_notify() MLME notification Deauthenticate(39)
src/netdev.c:netdev_deauthenticate_event()
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/station.c:station_free()
src/netconfig.c:netconfig_destroy()
src/resolve.c:resolve_systemd_revert() ifindex: 16
src/station.c:station_roam_state_clear() 16
src/netdev.c:netdev_mlme_notify() MLME notification Disconnect(48)
src/netdev.c:netdev_disconnect_event()
Received Deauthentication event, reason: 3, from_ap: false
0 0x472fa4 in station_disconnect_event src/station.c:2916
1 0x472fa4 in station_netdev_event src/station.c:2954
2 0x43a262 in netdev_disconnect_event src/netdev.c:1213
3 0x43a262 in netdev_mlme_notify src/netdev.c:5471
4 0x6706eb in process_multicast ell/genl.c:1029
5 0x6706eb in received_data ell/genl.c:1096
6 0x65e630 in io_callback ell/io.c:120
7 0x65a94e in l_main_iterate ell/main.c:478
8 0x65b0b3 in l_main_run ell/main.c:525
9 0x65b0b3 in l_main_run ell/main.c:507
10 0x65b5cc in l_main_run_with_signal ell/main.c:647
11 0x4124d7 in main src/main.c:532
If netdev_connect_failed is called before netdev_get_oci_cb() the
netdev's handshake will be destroyed and ultimately crash when the
callback is called.
This patch moves the cancelation into netdev_connect_free rather than
netdev_free.
++++++++ backtrace ++++++++
0 0x7f4e1787d320 in /lib64/libc.so.6
1 0x42634c in handshake_state_set_chandef() at src/handshake.c:1057
2 0x40a11b in netdev_get_oci_cb() at src/netdev.c:2387
3 0x483d7b in process_unicast() at ell/genl.c:986
4 0x480d3c in io_callback() at ell/io.c:120
5 0x48004d in l_main_iterate() at ell/main.c:472 (discriminator 2)
6 0x4800fc in l_main_run() at ell/main.c:521
7 0x48032c in l_main_run_with_signal() at ell/main.c:649
8 0x403e95 in main() at src/main.c:532
9 0x7f4e17867b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
Like in ap.c, allow the event callback to mark the handshake state as
destroyed, without causing invalid accesses after the callback has
returned. In this case the crash was because try_handshake_complete
needed to access members of handshake_state after emitting the event,
as well as access the netdev, which also has been destroyed:
==257707== Invalid read of size 8
==257707== at 0x408C85: try_handshake_complete (netdev.c:1487)
==257707== by 0x408C85: try_handshake_complete (netdev.c:1480)
(...)
==257707== Address 0x4e187e8 is 856 bytes inside a block of size 872 free'd
==257707== at 0x484621F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==257707== by 0x437887: ap_stop_handshake (ap.c:151)
==257707== by 0x439793: ap_del_station (ap.c:316)
==257707== by 0x43EA92: ap_station_disconnect (ap.c:3411)
==257707== by 0x43EA92: ap_station_disconnect (ap.c:3399)
==257707== by 0x454276: p2p_group_event (p2p.c:1006)
==257707== by 0x439147: ap_event (ap.c:281)
==257707== by 0x4393AB: ap_new_rsna (ap.c:390)
==257707== by 0x4393AB: ap_handshake_event (ap.c:1010)
==257707== by 0x408C7F: try_handshake_complete (netdev.c:1485)
==257707== by 0x408C7F: try_handshake_complete (netdev.c:1480)
(...)
- Mostly problems with whitespace:
- Use of spaces instead of tabs
- Stray spaces before closing ')
- Missing spaces
- Missing 'void' from function declarations & definitions that
take no arguments.
- Wrong indentation level
Direct leak of 64 byte(s) in 1 object(s) allocated from:
#0 0x7fa226fbf0f8 in __interceptor_malloc (/usr/lib/gcc/x86_64-pc-linux-gnu/9.4.0/libasan.so.5+0x10c0f8)
#1 0x688c98 in l_malloc ell/util.c:62
#2 0x6c2b19 in msg_alloc ell/genl.c:740
#3 0x6cb32c in l_genl_msg_new_sized ell/genl.c:1567
#4 0x424f57 in netdev_build_cmd_authenticate src/netdev.c:3285
#5 0x425b50 in netdev_sae_tx_authenticate src/netdev.c:3385
The disconnect event handler was mistakenly bailing out if FT or
reassociation was going on. This was done because a disconnect
event is sent by the kernel when CMD_AUTH/CMD_ASSOC is used.
The problem is an AP could also disconnect IWD which should never
be ignored.
To fix this always parse the disconnect event and, if issued by
the AP, always notify watchers of the disconnect.
The way a SA Query was done following a channel switch was slightly
incorrect. One because it is only needed when OCVC is set, and two
because IWD was not waiting a random delay between 0 and 5000us as
lined out by the spec. This patch fixes both these issues.
802.11 requires an STA initiate the SA Query procedure on channel
switch events. This patch refactors sending the SA Query into its
own routine and starts the procedure when the channel switch event
comes in.
In addition the OCI needs to be verified, so the channel info is
parsed and set into the handshakes chandef.
