For simplicity 160Mhz and 80+80Mhz were grouped together when
parsing the VHT capabilities, but the 80+80 bits were left in
vht_widht_map. This could cause an overflow when getting the
width map.
wiphy_select_akm will now check if BIP is supported, and if MFPR is
set in the scan_bss before returning either SAE AKMs. This will allow
fallback to another PSK AKM (e.g. hybrid APs) if any of the requirements
are not met.
Replace existing uses of memset to clear secrets with explicit_bzero to
make sure it doesn't get optimized away. This has some side effects as
documented in gcc docs but is still recommended.
In eap_secret_info_free make sure we clear both strings in the case of
EAP_SECRET_REMOTE_USER_PASSWORD secrets.
Environments with several AP's, all at low signal strength may
want to lower the roaming RSSI threshold to prevent IWD from
roaming excessively. This adds an option 'roam_rssi_threshold',
which is still defaulted to -70.
Also printing keys with l_debug conditional on an environment variable
as someone wanting debug logs, or leaving debug on accidentally, does
not necessarily want the keys in the logs and in memory.
At some point the connect command builder was modified, and the
control port over NL80211 check was moved to inside if (is_rsn).
For WPS, no supplicant_ie was set, so CONTROL_PORT_OVER_NL80211
was never set into CMD_CONNECT. This caused IWD to expect WPS
frames over netlink, but the kernel was sending them over the
legacy route.
This commit hardens the iwd.service.in template file for systemd
services. The following is a short explanation for each added directive:
+PrivateTmp=true
If true, sets up a new file system namespace for the executed processes
and mounts private /tmp and /var/tmp directories inside it that is not
shared by processes outside of the namespace.
+NoNewPrivileges=true
If true, ensures that the service process and all its children can never
gain new privileges through execve() (e.g. via setuid or setgid bits, or
filesystem capabilities).
+PrivateDevices=true
If true, sets up a new /dev mount for the executed processes and only
adds API pseudo devices such as /dev/null, /dev/zero or /dev/random (as
well as the pseudo TTY subsystem) to it, but no physical devices such as
/dev/sda, system memory /dev/mem, system ports /dev/port and others.
+ProtectHome=yes
If true, the directories /home, /root and /run/user are made
inaccessible and empty for processes invoked by this unit.
+ProtectSystem=strict
If set to "strict" the entire file system hierarchy is mounted
read-only, except for the API file system subtrees /dev, /proc and /sys
(protect these directories using PrivateDevices=,
ProtectKernelTunables=, ProtectControlGroups=).
+ReadWritePaths=/var/lib/iwd/
Sets up a new file system namespace for executed processes. These
options may be used to limit access a process might have to the file
system hierarchy. Each setting takes a space-separated list of paths
relative to the host's root directory (i.e. the system running the
service manager). Note that if paths contain symlinks, they are resolved
relative to the root directory set with RootDirectory=/RootImage=.
Paths listed in ReadWritePaths= are accessible from within
the namespace with the same access modes as from outside of
it.
+ProtectControlGroups=yes
If true, the Linux Control Groups (cgroups(7)) hierarchies accessible
through /sys/fs/cgroup will be made read-only to all processes of the
unit.
+ProtectKernelModules=yes
If true, explicit module loading will be denied. This allows module
load and unload operations to be turned off on modular kernels.
For further explanation to all directives see `man systemd.directives`
Hostapd has now been updated to include the group number when rejecting
the connection with UNSUPP_FINITE_CYCLIC_GROUP. We still need the existing
len == 0 check because old hostapd versions will still behave this way.
The single-use password is apparently sent in plaintext over the network
but at least try to prevent it from staying in the memory until we know
it's been used.
station.c generates the IEs we will need to use for the
Authenticate/Associate and EAPoL frames and sets them into the
handshake_state object. However the driver may modify some of them
during CMD_CONNECT and we need to use those update values so the AP
isn't confused about differing IEs in diffent frames from us.
Specifically the "wl" driver seems to do this at least for the RSN IE.
The KDF function processes data in 32 byte chunks so for groups which
primes are not divisible by 32 bytes, you will get a buffer overflow
when copying the last chunk of data.
Now l_checksum_get_digest is limited to the bytes remaining in the
buffer, or 32, whichever is the smallest.
Since eapol_encrypt_key_data already calculates the key data length and
encodes it into the key frame, we can just return this length and avoid
having to obtain it again from the frame.
Similar to SAE, EAP-PWD derives an ECC point (PWE). It is possible
for information to be gathered from the timing of this derivation,
which could be used to to recover the password.
This change adapts EAP-PWD to use the same mitigation technique as
SAE where we continue to derive ECC points even after we have found
a valid point. This derivation loop continues for a set number of
iterations (20 in this case), so anyone timing it will always see
the same timings for every run of the protocol.
This is not used by any of the scan notify callback implementations and
for P2P we're going to need to scan on an interface without an ifindex
so without this the other changes should be mostly contained in scan.
Also add a mask parameter to wiphy_get_supported_iftypes to make sure
the SupportedModes property only contains the values that can be used
as Device.Mode.
dbus_iftype_to_string returns NULL for unknown iftypes, the strdup will
also return NULL and ret[i] will be assigned a NULL. As a result
the l_strjoinv will not print the known iftypes that might have come
after that and will the l_strfreev will leak the strduped strings.
sc->state would get set when the TRIGGERED event arrived or when the
triggered callback for our own SCAN_TRIGGER command is received.
However it would not get reset to NOT_RUNNING when the NEW_SCAN_RESULTS
event is received, instead we'd first request the results with GET_SCAN
and only reset sc->state when that returns. If during that command a
new scan gets triggered, the GET_SCAN callback would still reset
sc->state and clobber the value set by the new scan.
To fix that repurpose sc->state to only track that period from the
TRIGGERED signal to the NEW_SCAN_RESULTS signal. sc->triggered can be
used to check if we're still waiting for the GET_SCAN command and
sc->start_cmd_id to check if we're waiting for the scan to get
triggered, so one of these three variables will now always indicate if
a scan is in progress.
We can crash if we abort the connection, but the connect command has
already gone through. In this case we will get a sequence of
authenticate_event, associate_event, connect_event. The first and last
events don't crash since they check whether netdev->connected is true.
However, this causes an annoying warning to be printed.
Fix this by introducing an 'aborting' flag and ignore all connection
related events if it is set.
++++++++ backtrace ++++++++
Now that the OWE failure/retry is handled in netdev, we can catch
all associate error status' inside owe_rx_associate rather than only
catching UNSUPP_FINITE_CYCLIC_GROUP.
Apart from OWE, the association event was disregarded and all association
processing was done in netdev_connect_event. This led to
netdev_connect_event having to handle all the logic of both success and
failure, as well as parsing the association for FT and OWE. Also, without
checking the status code in the associate frame there is the potential
for the kernel to think we are connected even if association failed
(e.g. rogue AP).
This change introduces two flags into netdev, expect_connect_failure and
ignore_connect_event. All the FT processing that was once in
netdev_connect_event has now been moved into netdev_associate_event, as
well as non-FT associate frame processing. The connect event now only
handles failure cases for soft/half MAC cards.
Note: Since fullmac cards rely on the connect event, the eapol_start
and netdev_connect_ok were left in netdev_connect_event. Since neither
auth/assoc events come in on fullmac we shouldn't have any conflict with
the new flags.
Once a connection has completed association, EAPoL is started from
netdev_associate_event (if required) and the ignore_connect_event flag can
be set. This will bypass the connect event.
If a connection has failed during association for whatever reason, we can
set expect_connect_failure, the netdev reason, and the MPDU status code.
This allows netdev_connect_event to both handle the error, and, if required,
send a deauth telling the kernel that we have failed (protecting against the
rogue AP situation).
OWE processing can be completely taken care of inside
netdev_authenticate_event and netdev_associate_event. This removes
the need for OWE specific checks inside netdev_connect_event. We can
now return early out of the connect event if OWE is in progress.
Several Auth/Assoc failure status codes indicate that the connection
failed for reasons such as bandwidth issues, poor channel conditions
etc. These conditions should not result in the BSS being blacklisted
since its likely only a temporary issue and the AP is not actually
"broken" per-se.
This adds support in station.c to temporarily blacklist these BSS's
on a per-network basis. After the connection has completed we clear
out these blacklist entries.
Certain error conditions require that a BSS be blacklisted only for
the duration of the current connection. The existing blacklist
does not allow for this, and since this blacklist is shared between
all interfaces it doesnt make sense to use it for this purpose.
Instead, each network object can contain its own blacklist of
scan_bss elements. New elements can be added with network_blacklist_add.
The blacklist is cleared when the connection completes, either
successfully or not.
Now inside network_bss_select both the per-network blacklist as well as
the global blacklist will be checked before returning a BSS.
Several netdev events benefit from including event data in the callback.
This is similar to how the connect callback works as well. The content
of the event data is documented in netdev.h (netdev_event_func_t).
By including event data for the two disconnect events, we can pass the
reason code to better handle the failure in station.c. Now, inside
station_disconnect_event, we still check if there is a pending connection,
and if so we can call the connect callback directly with HANDSHAKE_FAILED.
Doing it this way unifies the code path into a single switch statment to
handle all failures.
In addition, we pass the RSSI level index as event data to
RSSI_LEVEL_NOTIFY. This removes the need for a getter to be exposed in
netdev.h.
On successful send, scan_send_start(..) used to set msg to NULL,
therefore the further management of the command by the caller was
impossible. This patch removes wrapper around l_genl_family_send()
and lets the callers to take responsibility for the command.
This change cleans up the mess of status vs reason codes. The two
types of codes have already been separated into different enumerations,
but netdev was still treating them the same (with last_status_code).
A new 'event_data' argument was added to the connect callback, which
has a different meaning depending on the result of the connection
(described inside netdev.h, netdev_connect_cb_t). This allows for the
removal of netdev_get_last_status_code since the status or reason
code is now passed via event_data.
Inside the netdev object last_status_code was renamed to last_code, for
the purpose of storing either status or reason. This is only used when
a disconnect needs to be emitted before failing the connection. In all
other cases we just pass the code directly into the connect_cb and do
not store it.
All ocurrences of netdev_connect_failed were updated to use the proper
code depending on the netdev result. Most of these simply changed from
REASON_CODE_UNSPECIFIED to STATUS_CODE_UNSPECIFIED. This was simply for
consistency (both codes have the same value).
netdev_[authenticate|associate]_event's were updated to parse the
status code and, if present, use that if their was a failure rather
than defaulting to UNSPECIFIED.
Even though .check_settings in our EAP method implementations does the
settings validation, .load_settings also has minimum sanity checks to
rule out segfaults if the settings have changed since the last
.check_settings call.
If OWE fails in association there is no reason to send a disconnect
since its already known that we failed. Instead we can directly
call netdev_connect_failed
Instead of sending a reason_code to netdev_setting_keys_failed, make it
take an errno (negative) instead. Since key setting failures are
entirely a system / software issue, and not a protocol issue, it makes
no sense to use a protocol error code.
Some users may need their own control over 2.4/5GHz preference. This
adds a new user option, 'rank_5g_factor', which allows users to increase
or decrease their 5G preference.
This adds support for parsing the VHT IE, which allows a BSS supporting
VHT (80211ac) to be ranked higher than a BSS supporting only HT/basic
rates. Now, with basic/HT/VHT parsing we can calculate the theoretical
maximum data rate for all three and rank the BSS based on that.
This adds HT IE parsing and data rate calculation for HT (80211n)
rates. Now, a BSS supporting HT rates will be ranked higher than
a basic rate BSS, assuming the RSSI is at an acceptable level.
The spec dictates RSSI thresholds for different modulation schemes, which
correlate to different data rates. Until now were were ranking a BSS with
only looking at its advertised data rate, which may not even be possible
if the RSSI does not meet the threshold.
Now, RSSI is taken into consideration and the data rate returned from
parsing (Ext) Supported Rates IE(s) will reflect that.
All over the place we do "ie[1] + 2" for getting the IE length. It
is much clearer to use a macro to do this. The macro also checks
for NULL, and returns zero in this case.
Supported rates will soon be parsed along with HT/VHT capabilities
to determine the best data rate. This will remove the need for the
supported_rates uintset element in scan_bss, as well as the single
API to only parse the supported rates IE. AP still does rely on
this though (since it only supports basic rates), so the parsing
function was moved into ap.c.
In the methods' check_settings do a more complete early check for
possible certificate / private key misconfiguration, including check
that the certificate and the private key are always present or absent
together and that they actually match each other. Do this by encrypting
and decrypting a small buffer because we have no better API for that.
A method's .check_settings method checks for inconsistent setting files
and prints readable errors so there's no need to do that again in
.load_settings, although at some point after removing the duplicate
error messages from the load_settings methods we agreed to keep minimum
checks that could cause a crash e.g. in a corner case like when the
setting file got modified between the check_settings and the
load_settings call. Some error messages have been re-added to
load_settings after that (e.g. in
bb4e1ebd4f) but they're incomplete and not
useful so remove them.
Previously, the storage dir has only been created after a successful
network connection, causing removal of Known Network interface from
Dbus and failure to register dir watcher until daemon is restarted.
A length check was still assuming the 256 bit ECC group. This
was updated to scale with the group. The commit buffer was also
not properly sized. This was changed to allow for the largest
ECC group supported.
SAE was hardcoded to work only with group 19. This change fixes up the
hard coded lengths to allow it to work with group 20 since ELL supports
it. There was also good amount of logic added to support negotiating
groups. Before, since we only supported group 19, we would just reject
the connection to an AP unless it only supported group 19.
This did lead to a discovery of a potential bug in hostapd, which was
worked around in SAE in order to properly support group negotiation.
If an AP receives a commit request with a group it does not support it
should reject the authentication with code 77. According to the spec
it should also include the group number which it is rejecting. This is
not the case with hostapd. To fix this we needed to special case a
length check where we would otherwise fail the connection.
Most of this work was already done after moving ECC into ELL, but
there were still a few places where the 256-bit group was assumed.
This allows the 384-bit group to be used, and theoretically any
other group added to ELL in the future.
If we have a BSS list where all BSS's have been blacklisted we still
need a way to force a connection to that network, instead of having
to wait for the blacklist entry to expire. network_bss_select now
takes a boolean 'fallback_to_blacklist' which causes the selection
to still return a connectable BSS even if the entire list was
blacklisted.
In most cases this is set to true, as these cases are initiated by
DBus calls. The only case where this is not true is inside
station_try_next_bss, where we do want to honor the blacklist.
This both prevents an explicit connect call (where all BSS's are
blacklisted) from trying all the blacklisted BSS's, as well as the
autoconnect case where we simply should not try to connect if all
the BSS's are blacklisted.
There are is some implied behavior here that may not be obvious:
On an explicit DBus connect call IWD will attempt to connect to
any non-blacklisted BSS found under the network. If unsuccessful,
the current BSS will be blacklisted and IWD will try the next
in the list. This will repeat until all BSS's are blacklisted,
and in this case the connect call will fail.
If a connect is tried again when all BSS's are blacklisted IWD
will attempt to connect to the first connectable blacklisted
BSS, and if this fails the connect call will fail. No more
connection attempts will happen until the next DBus call.
If IWD fails to connect to a BSS we can attempt to connect to a different
BSS under the same network and blacklist the first BSS. In the case of an
incorrect PSK (MMPDU code 2 or 23) we will still fail the connection.
station_connect_cb was refactored to better handle the dbus case. Now the
netdev result switch statement is handled before deciding whether to send
a dbus reply. This allows for both cases where we are trying to connect
to the next BSS in autoconnect, as well as in the dbus case.
This makes __station_connect_network even less intelligent by JUST
making it connect to a network, without any state changes. This makes
the rekey logic much cleaner.
We were also changing dbus properties when setting the state to
CONNECTING, so those dbus property change calls were moved into
station_enter_state.
A new driver extended feature bit was added signifying if the driver
supports PTK replacement/rekeying. During a connect, netdev checks
for the driver feature and sets the handshakes 'no_rekey' flag
accordingly.
At some point the AP will decide to rekey which is handled inside
eapol. If no_rekey is unset we rekey as normal and the connection
remains open. If we have set no_rekey eapol will emit
HANDSHAKE_EVENT_REKEY_FAILED, which is now caught inside station. If
this happens our only choice is to fully disconnect and reconnect.
If we receive handshake message 1/4 after we are already connected
the AP is attempting to rekey. This may not be allowed and if not
we do not process the rekey and emit HANDSHAKE_EVENT_REKEY_FAILED
so any listeners can handle accordingly.
The AP structure was getting cleaned up twice. When the DBus stop method came
in we do AP_STOP on nl80211. In this callback the AP was getting freed in
ap_reset. Also when the DBus interface was cleaned up it triggered ap_reset.
Since ap->started gets set to false in ap_reset, we now check this and bail
out if the AP is already stopped.
Fixes:
++++++++ backtrace ++++++++
0 0x7f099c11ef20 in /lib/x86_64-linux-gnu/libc.so.6
1 0x43fed0 in l_queue_foreach() at ell/queue.c:441 (discriminator 3)
2 0x423a6c in ap_reset() at src/ap.c:140
3 0x423b69 in ap_free() at src/ap.c:162
4 0x44ee86 in interface_instance_free() at ell/dbus-service.c:513
5 0x451730 in _dbus_object_tree_remove_interface() at ell/dbus-service.c:1650
6 0x405c07 in netdev_newlink_notify() at src/netdev.c:4449 (discriminator 9)
7 0x440775 in l_hashmap_foreach() at ell/hashmap.c:534
8 0x4455d3 in process_broadcast() at ell/netlink.c:158
9 0x4439b3 in io_callback() at ell/io.c:126
10 0x442c4e in l_main_iterate() at ell/main.c:473
11 0x442d1c in l_main_run() at ell/main.c:516
12 0x442f2b in l_main_run_with_signal() at ell/main.c:644
13 0x403ab3 in main() at src/main.c:504
14 0x7f099c101b97 in /lib/x86_64-linux-gnu/libc.so.6
+++++++++++++++++++++++++++
This will allow for blacklisting a BSS if the connection fails. The
actual blacklist module is simple and must be driven by station. All
it does is add BSS addresses, a timestamp, and a timeout to a queue.
Entries can also be removed, or checked if they exist. The blacklist
timeout is configuratble in main.conf, as well as the blacklist
timeout multiplier and maximum timeout. The multiplier is used after
a blacklisted BSS timeout expires but we still fail to connect on the
next connection attempt. We multiply the current timeout by the
multiplier so the BSS remains in the blacklist for a larger growing
amount of time until it reaches the maximum (24 hours by default).
Soon BSS blacklisting will be added, and in order to properly decide if
a BSS should be blacklisted we need the status code on a failed
connection. This change stores the status code when there is a failure
in netdev and adds a getter to retrieve later. In many cases we have
the actual status code from the AP, but in some corner cases its not
obtainable (e.g. an error sending an NL80211 command) in which case we
just default to MMPDU_REASON_CODE_UNSPECIFIED.
Rather than continue with the pattern of setting netdev->result and
now netdev->last_status_code, the netdev_connect_failed function was
redefined so its no longer used as both a NL80211 callback and called
directly. Instead a new function was added, netdev_disconnect_cb which
just calls netdev_connect_failed. netdev_disconnect_cb should not be
used for all the NL80211 disconnect commands. Now netdev_connect_failed
takes both a result and status code which it sets in the netdev object.
In the case where we were using netdev_connect_failed as a callback we
still need to set the result and last_status_code but at least this is
better than having to set those in all cases.
Remove an unneeded buffer and its memcpy, remove the now unneeded use of
l_checksum_digest_length and use l_checksum_reset instead of creating a
new l_checksum for each chunk.
ELL ECC supports group 20 (P384) so OWE can also support it. This also
adds group negotiation, where OWE can choose a different group than the
default if the AP requests it.
A check needed to be added in netdev in order for the negotiation to work.
The RFC says that if a group is not supported association should be rejected
with code 77 (unsupported finite cyclic group) and association should be
started again. This rejection was causing a connect event to be emitted by
the kernel (in addition to an associate event) which would result in netdev
terminating the connection, which we didn't want. Since OWE receives the
rejected associate event it can intelligently decide whether it really wants
to terminate (out of supported groups) or try the next available group.
This also utilizes the new MIC/KEK/KCK length changes, since OWE dictates
the lengths of those keys.
