This bit of code was throwing exceptions if a test cleaned up files that
test-runner was expecting to clean up. Specifically testHotspot swaps out
main.conf and PSK files many times. This led to the exception being thrown,
caught, and ignored but further on test-runner would print:
"File _X_ not cleaned up!"
Now the files will be checked if they exist before trying to remove it.
There were a few places in dpp/dpp-util which passed a single byte but
was being read in with va_arg(va, size_t). On some architectures this was
causing failures presumably from the compiler using an integer type
smaller than size_t. As we do elsewhere, cast to size_t to force the
compiler to pass a properly sized iteger to va_arg.
Similarly to ofono/phonesim allow tests to be skipped if wpa_supplicant
is not found on the system.
This required some changes to DPP/P2P where Wpas() should be called first
since this can now throw a SkipTest exception.
The Wpas class was also made to allow __del__ to be called without
throwing additional exceptions in case wpa_supplicant was not found.
This allows the EAP tests to pass, but the fix really needs to be in
hostapd itself. Hostapd currently tries to lookup the EAP session
immediately after receiving EAPOL_REAUTH. This uses the identity
it has stored which, in the case of PEAP/TTLS, will always be a phase2
identity. During this initial lookup hostapd hard codes the identity
to be phase1 which is not true for PEAP/TTLS, and the lookup fails.
The current way this was being done was to import collections and
use collections.Mapping. This has been deprecated since python 3.3
but has worked up until python 3.10. After python 3.10 this will
no longer work, and Mapping must be imported from collections.abc.
This was passing IFNAME= along with EAPOL_REAUTH which does not work
in the context of a hostapd socket where the iface is already implied.
This fixes that issue as well as resets the events array and actually
waits for the required events afterwards.
After one of the eap-tls-common-based methods succeeds keep the TLS
tunnel instance until the method is freed, rather than free it the
moment the method succeeds. This fixes repeated method runs where until
now each next run would attempt to create a new TLS tunnel instance
but would have no authentication data (CA certificate, client
certificate, private key and private key passphrase) since those are
were by the old l_tls object from the moment of the l_tls_set_auth_data()
call.
Use l_tls_reset() to reset the TLS state after method success, followed
by a new l_tls_start() when the reauthentication starts.
The signal agent notifications were changed which breaks this test.
Specifically commit ce227e7b94 sends a notification when connected
which breaks the 'agent.calls' check. Since this check is done both
after connecting and once already connected the initial value may
be 1 or 0. Because of this that check was removed entirely.
This test was just piping the PSK files into /tmp/iwd/ssidCCMP.psk
which is a bit fragile if the storage dir was ever to change. Instead
use copy_to_storage and the 'name' keyword to copy the file.
If the user specifies the same parent directory for several outfiles
skip mounting since it already exists. For example:
--monitor /outfiles/monitor.txt --result /outfiles/result.txt
Inside the virtual environments /tmp is mounted as its own FS and not
taken from the host. This poses issues if any output files are directly
under /tmp since test-runner tries to mount the parent directory (/tmp).
The can be fixed by ensuring these output files are either not under
/tmp or at least one folder down the tree (e.g. /tmp/outputs/outfile.txt).
Now this requirement is enforced and test-runner will not start if any
output files parent directory is /tmp.
Usually the test home directory is a git repo somewhere e.g. under
/home. But if the home directory is located under /tmp this poses
a problem since UML remounts /tmp. To handle both cases mount
the home directory explicity.
Certain aspects of QEMU like mounting host directories may still require
root access but for UML this is not the case. To handle both cases first
check if SUDO_UID/GID are set and use those to obtain the actual users
ID's. Otherwise if running as non-root use the UID/GID of the user
directly.
A user reported that IWD was failing to FT in some cases and this was
due to the AP setting the Retry bit in the frame type. This was
unexpected by IWD since it directly checks the frame type against
0x00b0 which does not account for any B8-B15 bits being set.
IWD doesn't need to verify the frame type field for a few reasons:
First mpdu_validate checks the management frame type, Second the kernel
checks prior to forwarding the event. Because of this the check was
removed completely.
Reported-By: Michael Johnson <mjohnson459@gmail.com>
station_signal_agent_notify() has been refactored so that its usage is
simpler. station_rssi_level_changed() has been replaced by an inlined
call to station_signal_agent_notify().
The call to netdev_rssi_level_init() in netdev_connect_common() is
currently a no-op, because netdev->connected has not yet been set at
this stage of the connection attempt. Because netdev_rssi_level_init()
is only used twice, it's been replaced by two inlined calls to
netdev_set_rssi_level_idx().
The SignalLevelAgent API is currently broken by the system bus's
security policy, which blocks iwd's outgoing method call messages. This
patch punches a hole for method calls on the
net.connman.iwd.SignalLevelAgent interface.
There may be situations where DNS information should not be set (for
example in auto-tests where the resolver daemon is not running) or if a
user wishes to ignore DNS information obtained.
Allows granularly specifying the DHCP logging level. This allows the
user to tailor the output to what they need. By default, always display
info, errors and warnings to match the rest of iwd.
Setting `IWD_DHCP_DEBUG` to "debug", "info", "warn", "error" will limit
the logging to that level or higher allowing the default logging
verbosity to be reduced.
Setting `IWD_DHCP_DEBUG` to "1" as per the current behavior will
continue to enable debug level logging.
Use scapy library which allows one to easily construct and fudge various
network packets. This makes constructing spoofed packets much easier
and more readable compared to hex-encoded, hand-crafted frames.
The TA/BSSID addresses of spoofed disassociate frames were set
incorrectly. They should be using the 02:00:00:XX:XX:XX address, but
instead were being converted over to 42:00:00:XX:XX:XX address
After the initial handshake, once the TK has been installed, all frames
coming to the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to various attacks.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAPoL frames
received after the initial handshake has been completed.
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAP-Failure frame generated by
an adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAP frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAPoL 1/4 frame generated by an
adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted PTK 1/4 frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Do not fail an ongoing handshake when an invalid EAPoL frame is
received. Instead, follow the intent of 802.11-2020 section 12.7.2:
"EAPOL-Key frames containing invalid field values shall be silently
discarded."
This prevents a denial-of-service attack where receipt of an invalid,
unencrypted EAPoL 1/4 frame generated by an adversary results in iwd
terminating an ongoing connection.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Periodic scan requests are meant to be performed with a lower priority
than normal scan requests. They're thus given a different priority when
inserting them into the wiphy work queue. Unfortunately, the priority
is not taken into account when they are inserted into the
sr->requests queue. This can result in the scanning code being confused
since it assumes the top of the queue is always the next scheduled or
currently ongoing scan. As a result any further wiphy_work might never be
started properly.
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_timeout() 1
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 4
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_done() Work item 3 done
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_notify() Scan notification Trigger Scan(33)
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_request_triggered() Passive scan triggered for wdev 1
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_triggered() Periodic scan triggered for wdev 1
In the above log, scan request 5 (triggered by dbus) is started before
scan request 4 (periodic scan). Yet the scanning code thinks scan
request 4 was triggered.
Fix this by using the wiphy_work priority to sort the sr->requests queue
so that the scans are ordered in the same manner.
Reported-by: Alvin Šipraga <ALSI@bang-olufsen.dk>
update_config=1 lets wpa_supplicant write config changes
to the config file. In the real world this is what you want
so your DPP credentials are persistant. But for testing this
is not correct since multiple tests use the same config file
and expect it to be pristine.
Occationally wpa_supplicant was connecting to the AP without
running DPP because the config already had the network
credentials.
The upstream code immediately retransmitted any no-ACK frames.
This would work in cases where the peer wasn't actively switching
channels (e.g. the ACK was simply lost) but caused unintended
behavior in the case of a channel switch when the peer was not
listening.
If either IWD or the peer needed to switch channels based on the
authenticate request the response may end up not getting ACKed
because the peer is idle, or in the middle of the hardware changing
channels. IWD would get no-ACK and immediately send the frame again
and most likely the same behavior would result. This would very
quickly increment frame_retry past the maximum and DPP would fail.
Instead when no ACK is received wait 1 second before sending out
the next frame. This can re-use the existing frame_pending buffer
and the same logic for re-transmitting.
There is a potential corner case of an offchannel frame callback
being called after ROC has ended.
This could happen in theory if a received frame is queued right as
the ROC session expires. If the ROC cancel event makes it to user
space before the frame IWD will schedule another ROC then receive
the frame. This doesn't prevent IWD from sending out another
frame since OFFCHANNEL_TX_OK is used, but it will prevent IWD from
receiving a response frame since no dwell duration is used with DPP.
To handle this an roc_started bool was added to the dpp_sm which
tracks the ROC state. If dpp_send_frame is called when roc_started
is false the frame will be saved and sent out once the ROC session
is started again.
ConnectHiddenNetwork creates a temporary network object and initiates a
connection with it. If the connection fails (due to an incorrect
passphrase or other reasons), then this temporary object is destroyed.
Delay its destruction until network_disconnected() since
network_connect_failed is called too early. Also, re-order the sequence
in station_reset_connection_state() in order to avoid using the network
object after it has been freed by network_disconnected().
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
station_hide_network will remove and free the network object, so calling
network_close_settings will result in a crash. Make sure this is done
prior to network object's destruction.
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
This only posed a problem oddly if the kernel binary was in the same
directory as test-runner. Resolving the absolute path with the
argument parser resolves the issue.
