3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-05 03:29:28 +01:00
Commit Graph

6023 Commits

Author SHA1 Message Date
James Prestwood
18d1c752f4 ap: add support for DHCPv4 server
The DHCP server can be enabled by enabling network configuration
with [General].EnableNetworkConfiguration. If an IP is not set
on the interface before the AP is started a valid IP range must
also be provided under [General].APRanges in IP prefix format e.g.

[General]
EnableNetworkConfiguration=true
APRanges=192.168.1.1/24

Each AP started will get assigned a new subnet within the range
specified by APRanges as to not conflict with other AP interfaces.
If there are no subnets left in the pool when an AP is started
it will fail with -EEXIST. Any AP's that are stopped will release
their subnet back into the pool to be used with other APs.

The DHCP IP pool will be automatically chosen by the ELL DHCP
implementation (+1 the AP's IP to *.254). The remaining DHCP
settings will be defaults chosen by ELL (DNS, lease time, etc).
2020-10-27 16:19:47 -05:00
Alvin Sipraga
01912a427a monitor: print survey info results
Example output:

  > Result: New Survey Results (0x33) len 76 [multi]         14.062327
    Interface Index: 6 (0x00000006)
    Survey Info: len 64
        Frequency: 2472 (0x000009a8)
        Noise dBm: -89
        Survey Time: 100 (0x0000000000000064)
        Busy Time: 4 (0x0000000000000004)
        RX Time: 3 (0x0000000000000003)
        TX Time: 0 (0x0000000000000000)
2020-10-27 09:53:49 -05:00
James Prestwood
f769d8f1b3 unit: add test for util_ip_prefix_tohl 2020-10-26 16:17:13 -05:00
James Prestwood
42605c9e76 util: add util_ip_prefix_tohl
Parses an IP prefix notation string into prefix, start, end, and
netmask. All values are returned in host order.
2020-10-26 16:16:12 -05:00
James Prestwood
b7e2a98628 ap: add error out param to ap_start
This allows the caller to extract a bit more information about what
exactly went wrong.
2020-10-26 14:30:34 -05:00
James Prestwood
3e69c33f74 auto-t: only return expected number from list_devices
If the caller specifies the number of devices only return that many.
Some sub-tests may only need a subset of the total number of devices
for the test. If the number of devices expected is less than the total
being returned, python would throw an exception.
2020-10-26 14:27:09 -05:00
James Prestwood
26c4b8b4fe test-runner: add switch for genl debugging
Providing 'iwd-genl' in the list of verbose options will enable
IWD_GENL_DEBUG.
2020-10-22 09:24:55 -05:00
James Prestwood
334b03478b test-runner: enable valgrind track origins
This gives a more exact location to where a memory problem
is happening. It also uses more RAM so the VM was upgraded to
256MB from 192MB.
2020-10-22 09:24:55 -05:00
James Prestwood
017d5f56df build: add ELL dhcp-server.c to build 2020-10-20 13:31:26 -05:00
James Prestwood
ebd712af4e auto-t: no hostapd instance graceful failure
If a test does not need any hostapd instances but still loads
hostapd.py for some reason we want to gracefully throw an
exception rather than fail in some other manor.
2020-10-20 13:30:43 -05:00
Denis Kenzior
9c72d2f546 build: Add dhcp-util.c from ell 2020-10-19 17:21:36 -05:00
Andrew Zaborowski
e28c211c36 autotests: Add testP2P
Add two P2P client connection scenarios.
2020-10-19 17:20:21 -05:00
Andrew Zaborowski
939a67255a autotests: Move some variables from IWD class to instance
These variables were probably meant as instance members and not class
members.
2020-10-19 17:20:21 -05:00
Andrew Zaborowski
719646df4d autotests: Add basic wpa_supplicant P2P python wrapper
Add the new wpas.Wpas class roughly based on hostapd.HostapdCLI but only
adding methods for the P2P-related stuff.

Adding "wpa_supplicant" to -v will enable output from the wpa_supplicant
process to be printed and "wpa_supplicant-dbg" will make it more verbose
("wpa_supplicant" is not needed because it seems to be automatically
enabled because of the glob matching in ctx.is_verbose)
2020-10-19 17:20:21 -05:00
Andrew Zaborowski
550f8f454c autotests: Basic P2P python API
Add a basic wrapper for the P2P-related DBus interfaces similar to the
existing classes in iwd.py.  WFD is not included.
2020-10-19 17:20:21 -05:00
Andrew Zaborowski
04487f575b test-runner: Reserve radios for wpa_supplicant
Add support for a WPA_SUPPLICANT section in  hw.conf where
'radN=<config_path>' lines will only reserve radios and create
interfaces for the autotest to be able to start wpa_supplicant on them,
i.e. this prevents iwd or hostapd from being started on them but doesn't
start a wpa_supplicant instance by itself.
2020-10-19 17:20:21 -05:00
James Prestwood
313d8dbbed auto-t: remove requirement for /var/lib/{ead,iwd}
The host systems configuration directories for IWD/EAD were
being mounted in the virtual machine. This required that the
host create these directories before hand. Instead we can
just set up the system and IWD/EAD to use directories in /tmp
that we create when we start the VM. This avoids the need for
any host configuration.
2020-10-14 13:03:17 -05:00
Andrew Zaborowski
008b29f359 doc: Fix SignalLevelAgent interface name and filename pointers
When the SignalLevelAgent doc blurb was moved to station-api.txt it
seems the interface was changed to Station.SignalLevelAgent in some
places but not in most and not in the code.  Also fix the pointers to
the doc file.
2020-10-14 13:01:48 -05:00
Andrew Zaborowski
1f89ebb86a station: Fix .Scanning being reset early
periodic_scan_stop is called whenever we exit the autoscan state but a
periodic scan may not be running at the time.  If we have a
user-triggered scan running, or the autoconnect_quick scan, and we reset
Scanning to false before that scan finished, a client could en up
calling GetOrderedNetwork too early and not receiving the scan results.
2020-10-14 13:01:18 -05:00
Andrew Zaborowski
9815fb38cf network: Check if network busy before new connection
Check if we have an ongoing agent call before starting a new connection
attempt and potentially overwriting network->agent_request.
2020-10-08 10:08:20 -05:00
Andrew Zaborowski
758dba214e station: Make Disconnect() cancel ConnectHiddenNetwork()
ConnectHiddenNetwork can be seen a triggering this sequence:
1. the active scan,
2. the optional agent request,
3. the Authentication/Association/4-Way Handshake/netconfig,
4. connected state

Currently Disconnect() interrupts 3 and 4, allow it to also interrupt
state 1.  It's difficult to tell whether we're in state 2 from within
station.c.
2020-10-08 08:54:01 -05:00
Denis Kenzior
84e32ba448 monitor: Improve RTM_NEWADDR/GETADDR/DELADDR decoding 2020-10-05 22:42:13 -05:00
Denis Kenzior
e9179c4270 monitor: Nicely print scope field 2020-10-05 22:40:29 -05:00
Andrew Zaborowski
db038022e8 test-runner: Make hwsim medium optional
Allow the "hwsim_medium=no" setting in hw.conf's SETUP section to
disable starting hwsim.  It looks like the packets going through
userspace add enough latency that active scans don't work, probe
responses don't arrive within the "dwell time" or probe requests are not
ACKed on time.  I've tried modifying tools/hwsim.c to respond with the
HWSIM_CMD_TX_INFO_FRAME cmd as the first thing after receiving a
HWSIM_CMD_FRAME and even skipping the queue in ell/genl.c by writing the
command synchronously, but neither helped enough to make the scans work.
This does not rule out that hwsim or the way our scans are done can be
fixed and that would obviously be better than what I did in this patch.
2020-09-29 13:20:29 -05:00
Andrew Zaborowski
b321db20ad test-runner: Add flags for DHCP and TLS verbose output
Add "iwd-tls" and "iwd-dhcp" flags for -v.  These should automatically
enable "-v iwd" output because of the substring matching.
2020-09-29 13:20:26 -05:00
Andrew Zaborowski
15c04bb395 test-runner: Enable --p2p when creating interfaces
Enable p2p for the hwsim radios so that we can test P2P.  This can be
made optional for the tests but it seems safe to enable always.
2020-09-29 13:20:24 -05:00
Andrew Zaborowski
d5c7b47745 p2p: Respond to Probe Requests when in discovery
Since our DBus API and our use cases only support initiating connections
and not accepting incoming connections we don't really need to reply to
Probe Requests on the P2P-Device interface.  Start doing it firstly so
that we can test the scenario where we get discovered and pre-authorized
to connect in an autotest (wpa_supplicant doesn't seem to have a way to
authorize everyone, which is probably why most Wi-Fi Display dongles
don't do it and instead reply with "Fail: Information not available" and
then restart connection from their side) and secondly because the spec
wants us to do it.
2020-09-29 13:14:28 -05:00
Andrew Zaborowski
ef902c5f7e p2p: Fix adding peers from Probe Request info
Make sure dev->peer_list is non-NULL before using l_queue_push_tail()
same as we do when the peer info comes from a Probe Response (active
scan in Find Phase).  Otherwise peers discovered through Probe Requests
before any Probe Responses are received will be lost.
2020-09-29 13:14:12 -05:00
Andrew Zaborowski
520ad56f83 scan: Drop unused frequency list parsing 2020-09-29 13:14:06 -05:00
Andrew Zaborowski
975696c5e0 wscutil: Fix subcategory string lookup
The device type category array is indexed by the category ID so if we're
skipping i == 0 in the iteration, we should also skip the 0'th element
in device_type_categories.
2020-09-29 13:11:07 -05:00
Andrew Zaborowski
fab764967b frame-xchg: Cancel NL80211_CMD_FRAME commands when interrupted
The callback for the FRAME command was causing a crash in
wiphy_radio_work_done when not cancelled when the wiphy was being
removed from the system.  This was likely to happen if this radio work
item was waiting for another item to finish.  When the first one was
being cancelled due to the wiphy being removed, this one would be
started and immediately stopped by the radio work queue.

Now this crash could be fixed by dropping all frame exchange instances
on an interface that is being removed which is easy to do, but properly
cancelling the commands saves us the headache of analysing whether
there's a race condition in other situations where a frame exchange is
being aborted.
2020-09-29 13:10:23 -05:00
Andrew Zaborowski
3de345e903 frame-xchg: Add no-cck-rate flag only for P2P interfaces
We want to use this flag only on the interfaces with one of the three
P2P iftypes so set the flag automatically depending on the iftype from
the last 'config' notification.
2020-09-29 13:09:05 -05:00
Denis Kenzior
cbd73f8067 build: Add net-private.h 2020-09-29 13:09:05 -05:00
James Prestwood
1a02fdcefd test-runner: add iwmon options
This extends test-runner to also use iwmon if --log is enabled.
For this case the iwmon log will be found inside each test
log directory.

A new option, --monitor <file> was added in case full logging isn't
desired (potentially for timing issues) but a iwmon log is needed.
Be aware that when --monitor is used test-runner will mount the
entire parent directory. test-runner itself will only write to the
file specified, but just know that the parent directory is available
as read-write inside the VM.

--log takes precedence over --monitor, meaning the iwmon log will
be written to <logdir>/<test>/iwmon instead of the file specified
with --monitor if both options are provided.
2020-09-29 09:10:07 -05:00
Andrew Zaborowski
c51e187462 ap: Use frame-xchg when sending frames
Convert ap_send_mgmt_frame() to use frame_xchg_start for sending frames,
this fixes among other things the ACK-received checks.

One side effect is that we're no longer sending Probe Responses with the
don't-wait-for-ack flag because frame-xchg doesn't support it, but other
AP implementations don't use that flag either.

Another side-effect is that we do use the no-cck-rate flag
unconditionally, something we may want to fix but would need to add
another parameter to frame-xchg.
2020-09-21 22:13:38 -05:00
Andrew Zaborowski
311e91b944 p2p: Free response frame payloads 2020-09-21 22:13:32 -05:00
Andrew Zaborowski
c58b91dfd4 p2p: Free parsed frame data in p2p_go_negotiation_confirm_cb 2020-09-21 22:13:24 -05:00
Andrew Zaborowski
47596c67d3 p2p: Free peer->wfd in p2p_peer_free 2020-09-21 22:13:21 -05:00
James Prestwood
df0b64f8d0 auto-t: add EAD autotest 2020-09-17 16:20:04 -05:00
James Prestwood
9897efe75c test-runner: allow EAD-based autotests
The virtual environment changed slightly adding two network adatpers
which are connected to the same backend so they can communicate with
each other (basically connected to a switch). The hostapd command
line was modified to allow no interfaces to be passed in which lets
us create zero radios but still specify a radius_config file.
2020-09-17 16:19:39 -05:00
James Prestwood
c707bee6ac auto-t: add ead.py module
This module is essentially a heavily stripped down version of iwd.py
to work with EAD. Class names were changed to match EAD but basically
the EAD, Adapter, and AdapterList classes map 1:1 to IWD, Device, and
DeviceList.
2020-09-17 16:19:37 -05:00
James Prestwood
ab51228b38 auto-t: allow IWDDBusAbstract to work with any service
This is somewhat of a hack, but the IWDDBusAbstract is a very
convenient abstraction to DBus objects. The only piece that restricts
it to IWD is the hardcoded IWD_SERVICE. Instead we can pass in a
keyword argument which defaults to IWD_SERVICE. That way other modules
(like EAD) can utilize this abstraction with their own service simply
by changing that service argument.
2020-09-17 16:18:31 -05:00
James Prestwood
4cc067e58e doc: update hostapd.conf with DRIVER_WIRED 2020-09-17 16:18:27 -05:00
James Prestwood
5cf748e98b auto-t: modify copy_to_storage to take optional dir
This is to prepare for testing EAD, and in this case we need
to copy the 8021x config to /var/lib/ead instead of IWD's
config dir.
2020-09-17 16:18:03 -05:00
James Prestwood
1e8fedce6c auto-t: fix testNetconfig
The interface was hard coded to wln0 which works when running single
tests but not when running multiple. Instead use the actual ifname
that hostapd is using.
2020-09-17 16:17:57 -05:00
Andrew Zaborowski
ee4e1368d2 p2p: Try IP allocation during 4-Way handshake on client 2020-09-16 17:25:44 -05:00
Andrew Zaborowski
68cb9d38bf p2p: Start a basic P2P Group after GO Negotiation
Use the ap.c API to start an AP on a P2P_GO interface after we've been
selected as the GO in the GO Negotiation.
2020-09-16 17:25:44 -05:00
Andrew Zaborowski
185b676f31 ap: Rename wpa2_psk to wpa2_passphrase on DBus
Use the passphrase naming instead of PSK.
2020-09-16 17:25:44 -05:00
Andrew Zaborowski
fbe7e0bd36 ap: Support working without passphrase
Add a "psk" setting to allow the user to pass the binary PSK directly
instead of generating it from the passphrase and the SSID.  In that case
we'll only send the PSK to WSC enrollees.
2020-09-16 17:25:44 -05:00
Andrew Zaborowski
1f68696578 ap: Pass "ops" struct to ap_start()
Pass the event callback function pointer in a "struct ap_ops" instead of
as individual ap_start() argument to make adding new callbacks easier.
2020-09-16 17:25:34 -05:00