Station was really a misnomer, it should have been AccessPoint. Also
mark the API as experimental. It will be moved to the Diagnostics
interface eventually.
A sorted list of hidden network BSSs observed in the recent scan
is kept for the informational purposes of the clients. In addition,
it has deprecated the usage of seen_hidden_networks variable.
Refactor the network->psk and network->passphrase loading and saving
logic to not require the PreSharedKey entry in the psk config file and
to generate network->psk lazily on request. Still cache the computed
PSK in memory and in the .psk file to avoid recomputing it which uses
many syscalls. While there update the ask_psk variable to
ask_passphrase because we're specifically asking for the passphrase.
According to the specification, Supported rates IE is supposed
to have a maximum length of eight rate bytes. In the wild an
Access Point is found to add 12 bytes of data instead of placing
excess rate bytes in an Extended Rates IE.
BSS: len 480
BSSID 44:39:C4:XX:XX:XX
Probe Response: true
TSF: 0 (0x0000000000000000)
IEs: len 188
...
Supported rates:
1.0(B) 2.0(B) 5.5(B) 6.0(B) 9.0 11.0(B) 12.0(B) 18.0 Mbit/s
24.0(B) 36.0 48.0 54.0 Mbit/s
82 84 8b 8c 12 96 98 24 b0 48 60 6c .......$.H`l
DSSS parameter set: channel 3
03
...
Any following IEs decode nicely, thus it seems that we can relax
Supported Rates IE length handling to support this thermostat.
After moving AP EAPoL code into eapol.c there were a few functions that
no longer needed to be public API's. These were changed to static's and
the header definition was removed.
Set an upper limit on a fragmented EAP-TLS request size similar to how
we do it in EAP-TTLS. While there make the code more similar to the
EAP-TTLS flag processing to keep them closer in sync. Note that the
spec suggests a 64KB limit but it's not clear if that is for the TLS
record or EAP request although it takes into account the whole TLS
negotiation so it might be good for both.
==24195== Syscall param socketcall.sendto(msg) points to uninitialised byte(s)
==24195== at 0x4F3DBEF: sendto (in /lib64/libc-2.26.so)
==24195== by 0x13A453: can_write_data (netlink.c:119)
==24195== by 0x13866B: io_callback (io.c:149)
==24195== by 0x137365: l_main_iterate (main.c:389)
==24195== by 0x1374A3: l_main_run (main.c:436)
==24195== by 0x113524: main (main.c:832)
==24195== Address 0x5205f99 is 57 bytes inside a block of size 88 alloc'd
==24195== at 0x4C2D0AF: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24195== by 0x133931: l_malloc (util.c:62)
==24195== by 0x13AEF3: l_netlink_send (netlink.c:411)
==24195== by 0x112351: rtm_interface_send_message (main.c:276)
==24195== by 0x1126F3: iwmon_interface_lookup (main.c:405)
==24195== by 0x11351F: main (main.c:830)
==24195== Uninitialised value was created by a heap allocation
==24195== at 0x4C2D0AF: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24195== by 0x133931: l_malloc (util.c:62)
==24195== by 0x11217B: rtm_interface_send_message (main.c:234)
==24195== by 0x1126F3: iwmon_interface_lookup (main.c:405)
==24195== by 0x11351F: main (main.c:830)
Some of the TTLS server implementations set the L flag in the fragment
packets other than the first one. To stay interoperable with such devices,
iwd is relaxing the L bit check.
==23290== Invalid read of size 4
==23290== at 0x12D334: timeout_destroy (timeout.c:61)
==23290== by 0x12CDD1: l_main_exit (main.c:466)
==23290== by 0x111F3B: main (main.c:835)
==23290== Address 0x5211d80 is 0 bytes inside a block of size 32 free'd
==23290== at 0x4C2E1BB: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x111F36: main (main.c:833)
==23290== Block was alloc'd at
==23290== at 0x4C2CF8F: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x12A74D: l_malloc (util.c:62)
==23290== by 0x12D40F: timeout_create_with_nanoseconds (timeout.c:135)
==23290== by 0x112A31: signal_handler (main.c:661)
==23290== by 0x12D03A: signal_callback (signal.c:82)
==23290== by 0x12CC6D: l_main_iterate (main.c:387)
==23290== by 0x12CD3B: l_main_run (main.c:434)
==23290== by 0x1121F2: main (main.c:821)
==23290==
==23290== Invalid read of size 8
==23290== at 0x12D33B: timeout_destroy (timeout.c:64)
==23290== by 0x12CDD1: l_main_exit (main.c:466)
==23290== by 0x111F3B: main (main.c:835)
==23290== Address 0x5211d90 is 16 bytes inside a block of size 32 free'd
==23290== at 0x4C2E1BB: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x111F36: main (main.c:833)
==23290== Block was alloc'd at
==23290== at 0x4C2CF8F: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x12A74D: l_malloc (util.c:62)
==23290== by 0x12D40F: timeout_create_with_nanoseconds (timeout.c:135)
==23290== by 0x112A31: signal_handler (main.c:661)
==23290== by 0x12D03A: signal_callback (signal.c:82)
==23290== by 0x12CC6D: l_main_iterate (main.c:387)
==23290== by 0x12CD3B: l_main_run (main.c:434)
==23290== by 0x1121F2: main (main.c:821)
==23290==
==23290== Invalid write of size 4
==23290== at 0x12D33F: timeout_destroy (timeout.c:62)
==23290== by 0x12CDD1: l_main_exit (main.c:466)
==23290== by 0x111F3B: main (main.c:835)
==23290== Address 0x5211d80 is 0 bytes inside a block of size 32 free'd
==23290== at 0x4C2E1BB: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x111F36: main (main.c:833)
==23290== Block was alloc'd at
==23290== at 0x4C2CF8F: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==23290== by 0x12A74D: l_malloc (util.c:62)
==23290== by 0x12D40F: timeout_create_with_nanoseconds (timeout.c:135)
==23290== by 0x112A31: signal_handler (main.c:661)
==23290== by 0x12D03A: signal_callback (signal.c:82)
==23290== by 0x12CC6D: l_main_iterate (main.c:387)
==23290== by 0x12CD3B: l_main_run (main.c:434)
==23290== by 0x1121F2: main (main.c:821)
Switch EAP-MD5 to use the common password setting key nomenclature.
The key name has been changed from PREFIX-MD5-Secret to PREFIX-Password.
Note: The old key name is supported.
In addition, this patch adds an ability to request Identity and/or
Password from user.
