wsc_attr_builder_start_attr and wsc_attr_builder_free look at
builder->curlen to see whether the TLV's length needs to be updated to
include the previous attribute. If builder->curlen is 0
wsc_attr_builder_start_attr assumes there's no previous attribute and
starts writing at current builder->offset. If the previous attribute
length was 0 curlen would stay at 0 and that attribute would get
overwritten with the new one. To solve this add the 4 bytes of the T
and L to curlen as soon as a new attribute is started, and subtract
them when writing the L value. The alternative would be to set a flag
to say whether an attribute was started.
The spec explicitly allows 0-length attributes in section 12:
"The variable length string attributes, e.g., Device Name, are encoded
without null-termination, i.e., no 0x00 octets added to the end of the
value. If the string is empty, the attribute length is set to zero."
Add ability to populate search domains for resolvconf based systems.
Search domains are added using the 'search' directive and added using
the <ifname>.domain key into resolvconf.
Introduce a new resolvconf_invoke function that takes care of all the
details of invoking resolvconf and simplify the code a bit.
Introduce have_dns that tracks whether DNS servers were actually
provided. If no DNS info was provided, do not invoke resolvconf to
remove it.
Instead of interface index, resolvconf is now invoked with the printable
name of the interface and the dns entries are placed in the "dns"
protocol. This makes it a bit simpler to add additional info to
resolvconf instead of trying to generate a monolithic entry.
Resolve module does not currently track any state that has been set on
a per ifindex basis. This was okay while the set of information we
supported was quite small. However, with dhcpv6 support being prepared,
a more flexible framework is needed.
Change the resolve API to allocate and return an instance for a given
ifindex that has the ability to track information that was provided.
Found using lsan:
==29896==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 9 byte(s) in 1 object(s) allocated from:
#0 0x7fcd41e0c710 in __interceptor_malloc /var/tmp/portage/sys-devel/gcc-8.2.0-r6/work/gcc-8.2.0/libsanitizer/asan/asan_malloc_linux.cc:86
#1 0x606abd in l_malloc ell/util.c:62
#2 0x460230 in ie_tlv_vendor_ie_concat src/ie.c:140
#3 0x4605d1 in ie_tlv_extract_wfd_payload src/ie.c:216
#4 0x4a8773 in scan_parse_bss_information_elements src/scan.c:1105
#5 0x4a94a8 in scan_parse_attr_bss src/scan.c:1181
#6 0x4a99f8 in scan_parse_result src/scan.c:1238
#7 0x4abe4e in get_scan_callback src/scan.c:1451
#8 0x6442d9 in process_unicast ell/genl.c:979
#9 0x6453ff in received_data ell/genl.c:1087
#10 0x62e1a4 in io_callback ell/io.c:126
#11 0x628fca in l_main_iterate ell/main.c:473
#12 0x6294e8 in l_main_run ell/main.c:520
#13 0x629d8b in l_main_run_with_signal ell/main.c:642
#14 0x40681b in main src/main.c:505
#15 0x7fcd40a55bdd in __libc_start_main (/lib64/libc.so.6+0x21bdd)
When the client is interrupted in the middle of user input entry and the
input is masked, the terminal might be left in a weird state. Make sure
to reset the prompt if the agent is being cleaned up in the middle of an
operation.
This commit has all the changes to extend and generalise the current
eap-wsc.c code to handle both the Enrollee and Registrar side of the
protocol, reusing existing functions and structures.
Alongside the current EAP-WSC enrollee side support, add the initial
part of registrar side. In the same file, register a new method with
the name string of "WSC-R". In this patch only the load_settings
method is added. validate_identity and handle_response are added in
later patches.
Handle EAPoL-EAP frames using our eap.c methods in authenticator mode
same as we do on the supplicant side. The user (ap.c) will only need to
set a valid 8021x_settings in the handshake object, same as on the
supplicant side.
The goal is to add specifically EAP-WSC registrar side and it looks like
extending our EAP and EAPoL code to support both supplicant and
authenticator-side methods is simpler than adding just EAP-WSC as a
special case.
Since EAP-WSC always ends in an EAP failure, I haven't actually tested
the success path.
On the supplicant side eapol_register would only register the eapol_sm
on a given netdev to start receiving frames and an eapol_start call is
required for the state machine to start executing. On the authenticator
side we shouldn't have the "early frame" problem but there's no reason
for the semantics of the two methods to be different. Somehow we were
doing everything in eapol_register and not using eapol_start if
hs->authenticator was true, so bring this in line with the supplicant
side and require eapol_start to be called also from ap.c.
Move the update of station->networks_sorted order to before we set
station->connected_network NULL to avoid a crash when we attempt to
use the NULL pointer.
Besides being undefined behaviour, signed integer overflow can cause
unexpected comparison results. In the case of network_rank_compare(),
a connected network with rank INT_MAX would cause newly inserted
networks with negative rank to be inserted earlier in the ordered
network list. This is reflected in the GetOrderedMethods() DBus method
as can be seen in the following iwctl output:
[iwd]# station wlan0 get-networks
Network name Security Signal
----------------------------------------------------
BEOLAN 8021x **** }
BeoBlue psk *** } all unknown,
UI_Test_Network psk *** } hence assigned
deneb_2G psk *** } negative rank
BEOGUEST open **** }
> titan psk ****
Linksys05274_5GHz_dmt psk ****
Lyngby-4G-4 5GHz psk ****
Doing so ensures that the currently connected network is always at the
beginning of the list. Previously, the list would only get updated after
a scan.
This fixes the documented behaviour of GetOrderedNetworks() DBus method,
which states that the currently connected network is always at the
beginning of the returned array.
Fix a logic error which prevented iwd from using SAE/WPA3 when
attempting to connect to APs that are in transition mode. The SAE/WPA3
check incorrectly required mfpr bit to be set, which is true for
APs in WPA3-Personal only mode, but is set to 0 for APs in
WPA3-Personal transition mode.
This patch also adds a bit more diagnostic output to help diagnose
causes for connections where WPA3 is not attempted even when advertised
by the AP.
Replace the usage of eap_send_response() in the method implementations
with a new eap_method_respond that skips the redundant "type" parameter.
The new eap_send_packet is used inside eap_method_respond and will be
reused for sending request packets in authenticator side EAP methods.
Throughout the supplicant mode we'd use the eapol_sm_write wrapper but
in the authenticator mode we'd call __eapol_tx_packet directly. Adapt
eapol_sm_write to use the right destination address and use it
consistently.
sm->handshake already contains our RSN/WPA IE so there's no need to
rebuild it for msg 3/4, especially since we hardcode the fact that we
only support one pairwise cipher. If we start declaring more supported
ciphers and need to include a second RSNE we can first parse
sm->hs->authenticator_ie into a struct ir_rsn_info, overwrite the cipher
and rebuild it from that struct.
This way we duplicate less code and we hardcode fewer facts about the AP
in eapol.c which also helps in adding EAP-WSC.
In both FT or FILS EAPoL isn't used for the initial handshake and only
for the later re-keys. For FT we added the
eapol_sm_set_require_handshake mechanism to tell EAPoL to not require
the initial handshake and we can re-use it for FILS.
Currently an adversary can retransmit EAPOL Msg4/4 to make the AP
reinstall the PTK. Against older Linux kernels this can subsequently
be used to decrypt, replay, and possibly decrypt frames. See the
KRACK attacks research at krackattacks.com for attack scenarios.
In this case no machine-in-the-middle position is needed to trigger
the key reinstallation.
Fix this by using the ptk_complete boolean to track when the 4-way
handshake has completed (similar to its usage for clients). When
receiving a retransmitted Msg4/4 accept this frame but do not reinstall
the PTK.
Credits to Chris M. Stone, Sam Thomas, and Tom Chothia of Birmingham
University to help discover this issue.
Instead of creating the results->bss_list l_queue lazily, always create
one before sending the GET_SCAN command. This is to make sure that an
empty list is passed to the scan callback (e.g. in station.c) instead of
a NULL. Passing NULL has been causing difficult to debug crashes in
station.c, in fact I think I've been seeing them for over a year now
but can't be sure. station_set_scan_results has been taking ownership
of the new BSS list and, if station->connected_bss was not on the list,
it would try to add it not realizing that l_queue_push_tail() was doing
nothing. Always passing a valid list may help us prevent similar
problems in the future.
The crash might start with:
==120489== Invalid read of size 8
==120489== at 0x425D38: network_bss_select (network.c:709)
==120489== by 0x415BD1: station_try_next_bss (station.c:2263)
==120489== by 0x415E31: station_retry_with_status (station.c:2323)
==120489== by 0x415E31: station_connect_cb (station.c:2367)
==120489== by 0x407E66: netdev_connect_failed (netdev.c:569)
==120489== by 0x40B93D: netdev_connect_event (netdev.c:1801)
==120489== by 0x40B93D: netdev_mlme_notify (netdev.c:3678)
The Gtk.Switch representing the p2p.Device's Enabled property should use
the "delayed state change" logic as described in Gtk.Switch docs, i.e.
we need to use .set_state() instead of .set_active() when we get
confirmation of the property having changed its value in the
PropertiesChanged handler. The ::active property is automatically
changed by Gtk.Switch on user input.
This way the UI gives visual feedback of when the device enable/disable
op starts and ends (or fails).
Subscribe to InterfacesAdded/Removed/PropertiesChanged signals before
using GetManagedObjects. For some reason when iwd starts after the
client, we consistently get the managed objects list from before Adapter
interfaces are added but we miss the subsequent InterfacesAdded
signals, probably has to do with the GetManagedObjects and the AddMatch
calls all being synchronous.
Secondly call self.populate_devices() on init as it won't be called if
IWD is not on the bus.
Incorporate the LGPL v2.1 licensed implementation of ARC4, taken from
the Nettle project (https://git.lysator.liu.se/nettle/nettle.git,
commit 3e7a480a1e351884), and tweak it a bit so we don't have to
operate on a skip buffer to fast forward the stream cipher, but can
simply invoke it with NULL dst or src arguments to achieve the same.
This removes the dependency [via libell] on the OS's implementation of
ecb(arc4), which may be going away, and which is not usually accelerated
in the first place.
Use a constant control flow in the derivation loop, avoiding leakage
in the iteration succesfuly converting the password.
Increase number of iterations (20 to 30) to avoid issues with
passwords needing more iterations.
Define a bunch of stream parameters each with a getter and an optional
setter. In the right pane of the window show widgets for these
properties, some as just labels and some as editable controls depending
on the type of the property. Parse the EDID data.
With some devices the 10 seconds are not enough for the P2P Group Owner
to give us an address but I think we still want to use a timeout as
short as possible so that the user doesn't wait too long if the
connection isn't working.
p2p_connection_reset may be called as a result of a WFD service
unregistering and p2p_own_wfd is going to be NULL, don't update
p2p_own_wfd->available in this case.
With some WFD devices we occasionally get a Disconnect before or during
the DHCP setup on the first connection attempt to a newly formeg group,
with the reason code MMPDU_REASON_CODE_PREV_AUTH_NOT_VALID. Retrying a
a few times makes the connections consistently successful. Some
conditions are simplified/update in this patch because
conn_dhcp_timeout now implies conn_wsc_bss, and both imply
conn_retry_count.
