pbot/doc/QuickStart.md

QuickStart

• Installation
  • Installing Perl
  • Installing CPAN modules
  • Installing PBot
    • git (recommended)
    • Download zip archive
• Initial Setup
  • Clone data-directory
  • Configuration
    • Recommended settings for IRC Networks
      • Freenode
      • IRCnet
      • Other networks
• Starting PBot
  • Usage
    • Overriding directories
    • Overriding registry
  • First-time start-up
    • Using default Freenode settings
    • Using custom settings
      • Custom recommended Freenode settings
      • Custom recommended IRCnet/other network settings
  • Regular start-up
• Additional configuration
  • Creating your bot owner admin account
  • Adding other users and admins
  • Adding channels
• Further Reading
  • Commands
  • Factoids
  • Plugins
  • Modules

Installation

Installing Perl

PBot uses the Perl programming language. Perl is usually part of a base Linux install. If you do not have Perl installed, please see your system’s documentation to install it.

Installing CPAN modules

Some of PBot’s features depend on the availability of Perl modules written by third parties. To use such PBot features, the modules listed in the MODULES file need to be installed.

The modules may be installed with a simple command:

$ cpan -f -i $(cat MODULES)

Some CPAN modules may fail to pass certain tests due to outdated variables. Despite these test failures, their core functionality should still work as expected.

Installing PBot

git (recommended)

The recommended way to install PBot is with git. This will allow you easily update to the latest version of PBot via the git update process by issuing the git pull command. Also, if you become interested in contributing improvements to PBot, you will be able to submit them through git.

The command to install with git is:

$ git clone https://github.com/pragma-/pbot.git

Download zip archive

Alternatively, you may download a ZIP archive.

Initial Setup

After git-cloning (or unpacking the ZIP archive) you should have a directory named pbot/ (or pbot-master/). It should contain at least these directories and files:

Name	Description
PBot/	PBot source tree
Plugins/	Dynamically loadable internal plugins
modules/	External command-line executables invokable as PBot commands
data/	Default data-directory
doc/	Helpful documentation
pbot	executable used to launch PBot

You may create a symbolic link to the pbot executable in $HOME/bin/ or even in /usr/local/bin/.

Clone data-directory

PBot uses a data-directory to store all its configuration settings and data. You must clone this data-directory for each instance of PBot you want to run, otherwise they will become quite confused with each other and things will break horribly.

Even if you’re using just one instance of PBot it is still strongly recommended to clone the default data-directory, especially if you used git to install PBot.

Here we clone the data-directory for two PBot instances, naming them after the IRC network they will connect to:

$ cd pbot (or pbot-master)
$ cp -r data freenode
$ cp -r data ircnet

Alternatively, you could name your new data directory after your bot’s nickname:

$ cp -r data coolbot

Configuration

PBot configuration is stored in a registry of key/value pairs grouped by sections. For more information, see the Registry documentation.

For initial first-time setup, you may configure registry settings via the PBot command-line options. We’ll show you how to do that soon! First, read on to see what settings you should configure.

Alternatively, you can edit the registry file in your cloned data-directory. See editing registry file for more information.

Here is a table of basic initial settings you should configure:

Registry key	Description	Default value
irc.botnick	IRC nickname. This is the name people see when you talk. Required.	undefined
irc.username	IRC username. This is the USER field of your hostmask.	pbot3
irc.realname	IRC gecos/realname. This is the general information or real-name field, as seen in WHOIS.	https://github.com/pragma-/pbot
irc.server	IRC server address to connect.	irc.freenode.net
irc.port	IRC server port.	6667
general.trigger	Bot trigger. Can be a character class containing multiple trigger characters. Can be overridden per-channel.	[!]

For a list of other available settings see this table in the Registry documentation.

Recommended settings for IRC Networks

Freenode

The default settings are tailored for the Freenode IRC network. It is strongly recommended that you register an account with NickServ and to request a hostmask cloak. Register your channels with ChanServ. These services will protect your nickname, IP address and channels.

Once you register your botnick with NickServ, it is recommended to set these additional settings:

Registry key	Description	Recommended value
irc.identify_password	Password to use to identify to NickServ	<password>
irc.randomize_nick	Randomize IRC nickname when connecting to server. PBot will change to irc.botnick when logged-in. This prevents users from monitoring the botnick to catch its IP address before it is identified.	1
general.autojoin_wait_for_nickserv	Wait for NickServ login before auto-joining channels. This prevents PBot from joining channels before it is identified and cloaked.	1
general.identify_command	Command to send to NickServ to identify. $nick will be replaced with irc.botnick; $password will be replaced with irc.identify_password. If you wish to login to a NickServ account different than the irc.botnick you may replace the $nick text with a literal value.	identify $nick $password

IRCnet

IRCnet is one of the oldest IRC networks still running. It has no Services like NickServ and ChanServ. Instead, its nicknames and channels are protected by custom bots.

These settings may be useful:

Registry key	Description	Default value	Recommended value
general.identify_nick	Who to /msg for login/identify/authentication. Defaults to NickServ, can be overridden to a custom bot.	NickServ	<service botnick>
general.identify_command	Command to send to general.identify_nick to login.	identify $nick $password	<service bot command>
general.op_nick	Who to /msg to request channel OP status. Defaults to ChanServ, can be overridden to a custom bot.	ChanServ	<service botnick>
general.op_command	Command to send to general.op_nick to request channel OP status.	op $channel	<service bot command>

Other networks

Other networks are untested. They should be very similiar to either Freenode or IRCnet, and so one or both of those recommended settings should suffice. If you have any issues, please report them here or in the #pbot2 channel on the Freenode network.

Starting PBot

Usage

$ pbot [directory overrides...] [registry overrides...]

Overriding directories

You may override PBot’s default directory locations via the command-line.

$ pbot data_dir=/path/to/data plugin_dir=/path/to/Plugins modules_dir=/path/to/modules

Overriding registry

You may override any of your Registry values via the command-line. Any overrides made will be saved to the registry file. You do not need to use the override every time you launch PBot.

$ pbot irc.botnick=coolbot irc.server=irc.example.com irc.port=6667 [...]

First-time start-up

Using default Freenode settings

The default settings will connect to the Freenode IRC network.

At minimum, the registry key irc.botnick must be set before PBot will connect to any IRC servers.

The following command will use the coolbot data-directory that we cloned in the initial setup, and set the irc.botnick registry key to the same name. It will automatically connect to the Freenode IRC network.

$ pbot data_dir=coolbot irc.botnick=coolbot

Using custom settings

To connect to a specific IRC server or to configure additional settings, you may override the directory paths and override the registry values. Read on to the next section for examples.

Custom recommended Freenode settings

The following command is based on the Recommended settings for IRC Networks section earlier in this document. The irc.server and irc.port settings are omitted because the default values will connect to the Freenode IRC network.

Replace the placeholders, marked X, with values you want to use. Note that this is just for the first-time start-up. Regular subsequent start-up needs only data_dir to be overridden.

• If you have registered your botnick with Freenode’s NickServ service, use this command:

  pbot data_dir=X irc.botnick=X irc.identify_password=X irc.randomize_nick=1 general.autojoin_wait_for_nickserv=1

• Otherwise, use this one:

  pbot data_dir=X irc.botnick=X

Custom recommended IRCnet/other network settings

The following command is based on the Recommended settings for IRC Networks section earlier in this document.

Replace the placeholders, marked X, with values you want to use. Note that this is just for the first-time start-up. Regular subsequent start-up needs only data_dir to be overridden.

• If you want PBot to identify with a custom bot or service on IRCnet/other networks, use this command:

  pbot data_dir=X irc.botnick=X irc.server=X irc.port=X general.identify_nick=X general.op_nick=X

• Otherwise, use this one:

  pbot data_dir=X irc.botnick=X irc.server=X irc.port=X

Regular start-up

After your initial start-up command, you only need to use the data_dir directory override when starting PBot. Any previously used registry overrides have been saved to your data-directory’s registry file.

$ pbot data_dir=X

Additional configuration

Once you’ve launched PBot, you can type directly into its terminal to execute commands as the built-in PBot console admin user account. This will allow you to use admin commands to create new users or join channels.

Creating your bot owner admin account

To create your own fully privileged admin user account, use the following commands in the PBot terminal console.

Suppose your nick is Bob and your hostmask is Bob!~user@some.domain.com.

useradd Bob global Bob!~user@*.domain.com botowner

This will create a user account named Bob with the botowner user-capability that can administrate all channels. Note the wildcard replacing some in some.domain.com. Now as long as your connected hostmask matches your user account hostmask, you will be recognized.

In your own IRC client, connected using the hostmask we just added, type the following command:

my password

This will show you the randomly generated password that was assigned to your user account. You can change it – if you want to – with:

my password <new password>

Then you can login with:

login <password>

Now you can use /msg in your own IRC client to administrate PBot, instead of the terminal console.

Adding other users and admins

To add users to PBot, use the useradd command.

useradd <account name> <channel> <hostmask> [capabilities [password]]

If you omit the capabilities argument, the user will be a normal unprivileged user. See user-capabilities for more information about user-capabilities.

If you omit the password argument, a random password will be generated. The user can use the my command to view or change it.

Users may view and change their own metadata by using the my command.

my [key [value]]

For more information, see the Admin documentation.

Adding channels

To temporarily join channels, use the join command.

join <channel>

To permanently add a channel to PBot, use the chanadd command. PBot will automatically join permanently added channels.

chanadd <channel>

To configure a permanent channel’s settings, use the chanset command:

chanset <channel> [key [value]]

You can chanset the following keys:

Name	Description	Default value
enabled	If set to false, PBot will not autojoin or respond to this channel.	1
chanop	If set to true, PBot will perform OP duties in this channel.	0
permop	If set to true, PBot will not de-OP itself in this channel.	0

For more information, see the Channels documentation.

Further Reading

That should get you started. For further information about PBot, check out these topics.

Commands

PBot has several core built-in commands. You’ve seen some of them in this document, for setting up channels and admins. Additional commands can be added to PBot through Plugins and Factoids.

For more information, see the Commands documentation.

Factoids

Factoids are a very special type of command. Anybody interacting with PBot can create, edit, delete and invoke factoids.

In their most basic form, a factoid merely displays the text the creator sets.

<pragma-> !factadd hello /say Hello, $nick!
   <PBot> hello added to global channel.

<pragma-> PBot, hello
   <PBot> Hello, pragma-!

Significantly more complex factoids can be built by using $variables, command-substitution, command-piping, /code invocation, and more!

For more information, see the Factoids documentation.

Plugins

Plugins provide optional PBot features. The default plugins loaded by PBot is set by the plugin_autoload file in your data-directory. To autoload additional plugins, add their name to this file.

You may manually load plugins using the plug command.

plug <plugin>

You may unload plugins using the unplug command.

unplug <plugin>

Plugins can be quickly reloaded by using the replug command.

replug <plugin>

Currently loaded plugins may be listed with the pluglist command.

<pragma-> !pluglist
   <PBot> Loaded plugins: ActionTrigger, AntiAway, AntiKickAutoRejoin, AntiNickSpam, AntiRepeat,
          AntiTwitter, AutoRejoin, Counter, Date, GoogleSearch, Quotegrabs, RemindMe, UrlTitles,
          Weather

For more information, see the Plugins documentation.

Modules

Modules are external command-line executable programs and scripts that can be loaded as PBot commands.

Suppose you have the Qalculate! command-line program and you want to provide a PBot command for it. You can create a very simple shell script containing:

#!/bin/sh
qalc "$*"

And let’s call it qalc.sh and put it in PBot’s modules/ directory.

Then you can use the PBot load command to load the modules/qalc.sh script as the qalc command:

!load qalc qalc.sh

Now you have a Qalculate! calculator in PBot!

<pragma-> !qalc 2 * 2
   <PBot> 2 * 2 = 4

For more information, see the Modules documentation.