feat(zones): skip on slave servers

Introduce 'nsd:opmode' pillar option, allowing the zone file management
to be skipped on slave DNS servers.

Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>

kitchen.yml

@@ -283,10 +283,10 @@ platforms:
   - name: ubuntu-1604-3000-8-py2
     driver:
       image: saltimages/salt-3000.8-py2:ubuntu-16.04
-# - name: arch-base-latest-3000-8-py2
-#   driver:
-#     image: saltimages/salt-3000.8-py2:arch-base-latest
-#     run_command: /usr/lib/systemd/systemd
+  # - name: arch-base-latest-3000-8-py2
+  #   driver:
+  #     image: saltimages/salt-3000.8-py2:arch-base-latest
+  #     run_command: /usr/lib/systemd/systemd
 
 provisioner:
   name: salt_solo
@@ -336,33 +336,33 @@ suites:
     verifier:
       inspec_tests:
         - path: test/integration/default
-# - name: gentoo
-#   includes:
-#     - gentoo-stage3-latest-master-py3
-#     - gentoo-stage3-systemd-master-py3
-#     - gentoo-stage3-latest-3002-5-py3
-#     - gentoo-stage3-systemd-3002-5-py3
-#     - gentoo-stage3-latest-3001-6-py3
-#     - gentoo-stage3-systemd-3001-6-py3
-#     - gentoo-stage3-latest-3000-8-py3
-#     - gentoo-stage3-systemd-3000-8-py3
-#   provisioner:
-#     state_top:
-#       base:
-#         '*':
-#           - nsd._mapdata
-#           - nsd
-#     pillars:
-#       top.sls:
-#         base:
-#           '*':
-#             - nsd
-#             - gentoo
-#             - define_roles
-#     pillars_from_files:
-#       nsd.sls: pillar.example
-#       gentoo.sls: test/salt/pillar/gentoo.sls
-#       define_roles.sls: test/salt/pillar/define_roles.sls
-#   verifier:
-#     inspec_tests:
-#       - path: test/integration/default
+  # - name: gentoo
+  #   includes:
+  #     - gentoo-stage3-latest-master-py3
+  #     - gentoo-stage3-systemd-master-py3
+  #     - gentoo-stage3-latest-3002-5-py3
+  #     - gentoo-stage3-systemd-3002-5-py3
+  #     - gentoo-stage3-latest-3001-6-py3
+  #     - gentoo-stage3-systemd-3001-6-py3
+  #     - gentoo-stage3-latest-3000-8-py3
+  #     - gentoo-stage3-systemd-3000-8-py3
+  #   provisioner:
+  #     state_top:
+  #       base:
+  #         '*':
+  #           - nsd._mapdata
+  #           - nsd
+  #     pillars:
+  #       top.sls:
+  #         base:
+  #           '*':
+  #             - nsd
+  #             - gentoo
+  #             - define_roles
+  #     pillars_from_files:
+  #       nsd.sls: pillar.example
+  #       gentoo.sls: test/salt/pillar/gentoo.sls
+  #       define_roles.sls: test/salt/pillar/define_roles.sls
+  #   verifier:
+  #     inspec_tests:
+  #       - path: test/integration/default

nsd/_test_dependencies.sls

@@ -5,7 +5,7 @@
 {%- else %}
 {%    set package = 'dnsutils' %}
 {%- endif %}
-
+  
 nsd-_test_dependencies--package--installed:
   pkg.installed:
     - name: {{ package }}

nsd/config/file.sls

@@ -4,6 +4,7 @@
 {#- Get the `tplroot` from `tpldir` #}
 {%- set tplroot = tpldir.split('/')[0] %}
 {%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- from tplroot ~ "/macros.jinja" import config_file with context %}
 {%- from tplroot ~ "/map.jinja" import mapdata as nsd with context %}
 {%- from tplroot ~ "/libtofs.jinja" import files_switch with context %}
 
@@ -28,3 +29,12 @@ nsd-config-file-file-managed:
     - context:
         nsd: {{ nsd | json }}
     - check_cmd: nsd-checkconf
+
+{%- set config_data = nsd.get('config_data', {}) %}
+
+{%- if config_data | length > 0 %}
+
+{{    config_file('10-salt', 'pillar-configuration') }}
+
+{%- endif %}
+

nsd/config/init.sls

@@ -6,3 +6,4 @@ include:
   - .config_files
   - .file
   - .zones
+  - .keys

nsd/config/keys.sls

@@ -0,0 +1,14 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- from tplroot ~ "/map.jinja" import mapdata as nsd with context %}
+{%- from tplroot ~ "/macros.jinja" import config_file with context %}
+
+{%- set keys = nsd.get('keys', {}) %}
+
+{%- if keys | length > 0 %}
+
+{{    config_file('80-generated-keys', 'generated-keys') }}
+
+{%- endif %}

nsd/config/zones.sls

@@ -10,11 +10,14 @@
 {%- from tplroot ~ "/macros.jinja" import zonefile_name with context %}
 
 {%- set zones = nsd.get('zones', {}) %}
+{%- set opmode = nsd.get('opmode', 'master') %}
 
 {%- if zones | length > 0 %}
 
 {{    config_file('90-generated-zones', 'generated-zones') }}
 
+{%- if opmode == 'master' %}
+
 nsd-config-zones-file-directory:
   file.directory:
     - name: {{ nsd.zones_dir }}
@@ -28,10 +31,14 @@ nsd-config-zones-file-directory:
 "{{ identifier }}":
   file.managed:
     - name: "{{ nsd.zones_dir }}/{{ zonefile_name(name, config) }}"
+    {%- if 'zone_source' in config %}
+    - source: {{ config['zone_source'] }}
+    {%- else %}
     - source: {{ files_switch([template, template+'.jinja'],
                               lookup=identifier
                  )
               }}
+    {%- endif %}
     - mode: 644
     - user: root
     - group: {{ nsd.rootgroup }}
@@ -49,3 +56,4 @@ nsd-config-zones-file-directory:
 
 {%-   endfor %}
 {%- endif %}
+{%- endif %}

nsd/files/default/generated-keys.conf.jinja

@@ -0,0 +1,11 @@
+########################################################################
+# File managed by Salt at <{{ source }}>.
+# Your changes will be overwritten.
+########################################################################
+
+{%- for name, config in nsd.get('keys').items() %}
+key:
+  name: "{{ name }}"
+  algorithm: "{{ config['algorithm'] }}"
+  secret: "{{ config['secret'] }}"
+{%- endfor %}

nsd/files/default/generated-zones.conf.jinja

@@ -1,4 +1,5 @@
 {%- from "nsd/macros.jinja" import zonefile_name with context -%}
+{%- set extraopts = ['allow-notify', 'request-xfr', 'outgoing-interface'] -%}
 ########################################################################
 # File managed by Salt at <{{ source }}>.
 # Your changes will be overwritten.
@@ -8,4 +9,9 @@
 zone:
   name: "{{ name }}"
   zonefile: "{{ nsd.zones_dir }}/{{ zonefile_name(name, config) }}"
+  {%- for option in extraopts %}
+  {%- if option in config %}
+  {{ option }}: {{ config[option] }}
+  {%- endif %}
+  {%- endfor %}
 {%- endfor %}

nsd/files/default/pillar-configuration.conf.jinja

@@ -0,0 +1,12 @@
+{%- for category, config in nsd.get('config_data').items() %}
+{{ category }}:
+{%- for option, value in config.items() %}
+  {%- if value is string or value is number %}
+  {{ option }}: {{ value }}
+  {%- elif value is iterable %}
+  {%- for item in value %}
+  {{ option }}: {{ item }}
+  {%- endfor %}
+  {%- endif %}
+{%- endfor %}
+{%- endfor %}

nsd/macros.jinja

@@ -25,7 +25,6 @@
       - file: nsd-config-file-file-managed
     - context:
         nsd: {{ nsd | json }}
-    - check_cmd: nsd-checkconf
     - watch_in:
       - service: nsd-service-running-service-running
 {%- endmacro %}

pillar.example

@@ -17,18 +17,51 @@ nsd:
   # config_include_glob: *.conf
 
   # Configuration is separated into several files which have their own templates
-  config_files:
-    10-server: local-nsd-for-unbound
-    # 90-generated-zones is reserved for zones generated by this formula
+  # config_files:
+  #   10-server: local-nsd-for-unbound
+  #   # 90-generated-zones is reserved for zones generated by this formula
+  #   # 10-salt is reserved for general configuration generated by this formula
+
+  # If this section is present in your Pillar data,
+  # nsd.conf.d/80-generated-keys will be created and managed
+  keys:
+    examplekey:
+      algorithm: hmac-sha512
+      secret: encryptme
 
   # If this section is present in your Pillar data,
   # nsd.conf.d/90-generated-zones will be created and managed.
   zones:
     example.test:
-      multi-master-check: 'no'
+      # Just for testing purpuses
+      multi-master-check: no
     "168.192.in-addr.arpa": {}
     # NSD's include-pattern directive may be a better way to share configuration
     # across zones than using YAML anchors.
+    #
+    # You can load the zone file from a custom source and specify additional configuration options:
+    # example.com:
+    #   zone_source: salt://zones/example.com.zone
+    #   request-xfr: 192.168.0.1
+
+  # If this section is present in your Pillar data,
+  # nsd.conf.d/10-salt.conf will be created and managed
+  config_data:
+    server:
+      hide-version: 'yes'
+      ip-address: 127.0.0.1
+      # to use an option multiple times, make it a list:
+      # ip-address:
+      #   - 127.0.0.1
+      #   - 192.168.0.1
+      verbosity: 2
+      port: 53530
+    remote-control:
+      control-enable: 'yes'
+      control-interface: /run/nsd.sock
+
+  # If this option is defined and set to 'slave', no DNS zone files will be installed
+  # opmode: slave
 
   tofs:
     # The files_switch key serves as a selector for alternative

test/integration/default/controls/services.rb

@@ -22,38 +22,38 @@ control 'nsd.service.running' do
   end
 
   describe command('nslookup -port=53530 ns1.example.test 127.0.0.1') do
-    its('stdout') { should match '192.168.0.1' }
+    its('stdout') { should match "192.168.0.1" }
   end
 
   describe command('nslookup -port=53530 ns2.example.test 127.0.0.1') do
-    its('stdout') { should match '192.168.0.2' }
+    its('stdout') { should match "192.168.0.2" }
   end
 
   describe command('nslookup -port=53530 example.test 127.0.0.1') do
-    its('stdout') { should match '192.168.0.10' }
+    its('stdout') { should match "192.168.0.10" }
   end
 
   describe command('nslookup -port=53530 www.example.test 127.0.0.1') do
-    its('stdout') { should match '192.168.0.10' }
+    its('stdout') { should match "192.168.0.10" }
   end
 
   describe command('nslookup -port=53530 mail.example.test 127.0.0.1') do
-    its('stdout') { should match '192.168.0.11' }
+    its('stdout') { should match "192.168.0.11" }
   end
 
   describe command('nslookup -port=53530 192.168.0.1 127.0.0.1') do
-    its('stdout') { should match 'ns1.example.test' }
+    its('stdout') { should match "ns1.example.test" }
   end
 
   describe command('nslookup -port=53530 192.168.0.2 127.0.0.1') do
-    its('stdout') { should match 'ns2.example.test' }
+    its('stdout') { should match "ns2.example.test" }
   end
 
   describe command('nslookup -port=53530 192.168.0.10 127.0.0.1') do
-    its('stdout') { should match 'example.test' }
+    its('stdout') { should match "example.test" }
   end
 
   describe command('nslookup -port=53530 192.168.0.11 127.0.0.1') do
-    its('stdout') { should match 'mail.example.test' }
+    its('stdout') { should match "mail.example.test" }
   end
 end

test/integration/default/files/_mapdata/amazonlinux-1.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/amazonlinux-2.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/arch-base-latest.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/centos-6.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/centos-7.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/centos-8.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/debian-10.yaml

@@ -7,8 +7,15 @@ values:
   added_in_pillar: pillar_value
   arch: amd64
   config: /etc/nsd/nsd.conf
-  config_files:
-   10-server: local-nsd-for-unbound
+  config_data:
+    remote-control:
+      control-enable: 'yes'
+      control-interface: /run/nsd.sock
+    server:
+      hide-version: 'yes'
+      ip-address: 127.0.0.1
+      port: 53530
+      verbosity: 2
   config_include_dir: "/etc/nsd/nsd.conf.d"
   config_include_glob: "*.conf"
   lookup:
@@ -47,3 +54,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/debian-9.yaml

@@ -7,8 +7,15 @@ values:
   added_in_pillar: pillar_value
   arch: amd64
   config: /etc/nsd/nsd.conf
-  config_files:
-   10-server: local-nsd-for-unbound
+  config_data:
+    remote-control:
+      control-enable: 'yes'
+      control-interface: /run/nsd.sock
+    server:
+      hide-version: 'yes'
+      ip-address: 127.0.0.1
+      port: 53530
+      verbosity: 2
   config_include_dir: "/etc/nsd/nsd.conf.d"
   config_include_glob: "*.conf"
   lookup:
@@ -47,3 +54,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/fedora-31.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/fedora-32.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/fedora-33.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/gentoo-2-sysd.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/gentoo-2-sysv.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/opensuse-15.yaml

@@ -7,8 +7,15 @@ values:
   added_in_pillar: pillar_value
   arch: amd64
   config: /etc/nsd/nsd.conf
-  config_files:
-   10-server: local-nsd-for-unbound
+  config_data:
+    remote-control:
+      control-enable: 'yes'
+      control-interface: /run/nsd.sock
+    server:
+      hide-version: 'yes'
+      ip-address: 127.0.0.1
+      port: 53530
+      verbosity: 2
   config_include_dir: "/etc/nsd/nsd.conf.d"
   config_include_glob: "*.conf"
   lookup:
@@ -47,3 +54,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/opensuse-tumbleweed.yaml

@@ -7,8 +7,15 @@ values:
   added_in_pillar: pillar_value
   arch: amd64
   config: /etc/nsd/nsd.conf
-  config_files:
-   10-server: local-nsd-for-unbound
+  config_data:
+    remote-control:
+      control-enable: 'yes'
+      control-interface: /run/nsd.sock
+    server:
+      hide-version: 'yes'
+      ip-address: 127.0.0.1
+      port: 53530
+      verbosity: 2
   config_include_dir: "/etc/nsd/nsd.conf.d"
   config_include_glob: "*.conf"
   lookup:
@@ -47,3 +54,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/oraclelinux-7.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/oraclelinux-8.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/ubuntu-16.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/ubuntu-18.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+

test/integration/default/files/_mapdata/ubuntu-20.yaml

@@ -47,3 +47,4 @@ values:
     example.test:
       multi-master-check: false
   zones_dir: "/etc/nsd/zones"
+