Initial commit.

.gitignore

@@ -0,0 +1,5 @@
+pkg/
+metadata.json
+*.idea
+*.swp
+*.tmp

LICENSE

@@ -0,0 +1,20 @@
+   Copyright (c) 2014 David Bezuidenhout <tinuva@ipv6.za.org>
+
+   NOTICE THE LICENSE EXCEPTIONS BELOW.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+
+   EXCEPTIONS:
+   You MAY NOT upload parts or the whole work of this product on Github or
+   any other platform again UNLESS you are in possession of an agreement
+   by the author OR use the function called "FORK" provided on Github itself.
+   Other parts of the specified license above are not affected.

README.rst

@@ -0,0 +1,68 @@
+===========
+firewalld-formula
+===========
+
+Salt Stack Formula to set up and configure Firewalld, dynamically managed firewall with support for network/firewall zones to define the trust level of network connections or interfaces
+
+NOTICE BEFORE YOU USE
+=====================
+
+* This formula aims to follow the conventions and recommendations described at http://docs.saltstack.com/topics/conventions/formulas.html
+
+TODO
+====
+
+* configure local pre-commit hooks (code syntax check based on file extension, check for ugly *utf-8 mac os white space*)
+
+Instructions
+============
+
+1. Add this repository as a `GitFS <http://docs.saltstack.com/topics/tutorials/gitfs.html>`_ backend in your Salt master config.
+
+2. Configure your Pillar top file (``/srv/pillar/top.sls``), see pillar.example
+
+3. Include this Formula within another Formula or simply define your needed states within the Salt top file (``/srv/salt/top.sls``).
+
+Available states
+================
+
+.. contents::
+    :local:
+
+``firewalld``
+-------
+Manage firewalld
+
+Additional resources
+====================
+
+None
+
+Formula Dependencies
+====================
+
+None
+
+Contributions
+=============
+
+Contributions are always welcome. All development guidelines you have to know are
+
+* write clean code (proper YAML+Jinja syntax, no trailing whitespaces, no empty lines with whitespaces, LF only)
+* set sane default settings
+* test your code
+* update README.rst doc
+
+Salt Compatibility
+==================
+
+Tested with:
+
+* 2014.1.x
+
+OS Compatibility
+================
+
+Tested with:
+
+* CentOS 7

VERSION

@@ -0,0 +1 @@
+0.1.0

firewalld/_config.sls

@@ -0,0 +1,29 @@
+# == State: firewalld._config
+#
+# This state configures firewalld.
+#
+
+/etc/firewalld/:
+  file.directory:            # make sure this is a directory
+    - user: root
+    - group: root
+    - mode: 750
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in:
+      - service: firewalld   # restart service
+
+/etc/firewalld/firewalld.conf:
+  file:
+    - managed
+    - name: /etc/firewalld/firewalld.conf
+    - user: root
+    - group: root
+    - mode: 640
+    - source: salt://firewalld/files/firewalld.conf
+    - template: jinja
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in: 
+      - service: firewalld   # restart service
+

firewalld/_service.sls

@@ -0,0 +1,41 @@
+# == State: firewalld._service
+#
+# This state ensures that /etc/firewalld/services/ exists.
+#
+/etc/firewalld/services:
+  file.directory:            # make sure this is a directory
+    - user: root
+    - group: root
+    - mode: 750
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in:
+      - service: firewalld   # restart service
+
+
+# == Define: firewalld._service
+#
+# This defines a service configuration, see firewalld.service (5) man page.
+# You usually don't need this, you can simply add ports to zone.
+
+{% for k, v in salt['pillar.get']('firewalld:services', {}).items() %}
+{% set s_name = v.name|default(k) %}
+
+/etc/firewalld/services/{{ s_name }}.xml:
+  file:
+    - managed
+    - name: /etc/firewalld/services/{{ s_name }}.xml
+    - user: root
+    - group: root
+    - mode: 644
+    - source: salt://firewalld/files/service.xml
+    - template: jinja
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in: 
+      - service: firewalld   # restart service
+    - context:
+        name: {{ s_name }}
+        service: {{ v }}
+
+{% endfor %}

firewalld/_zone.sls

@@ -0,0 +1,140 @@
+# == State: firewalld._zone
+#
+# This state ensures that /etc/firewalld/zones/ exists.
+#
+/etc/firewalld/zones:
+  file.directory:            # make sure this is a directory
+    - user: root
+    - group: root
+    - mode: 750
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in:
+      - service: firewalld   # restart service
+      
+
+# == Define: firewalld._zone
+#
+# This defines a zone configuration, see firewalld.zone (5) man page.
+#
+{% for k, v in salt['pillar.get']('firewalld:zones', {}).items() %}
+{% set z_name = v.name|default(k) %}
+
+/etc/firewalld/zones/{{ z_name }}.xml:
+  file:
+    - managed
+    - name: /etc/firewalld/zones/{{ z_name }}.xml
+    - user: root
+    - group: root
+    - mode: 644
+    - source: salt://firewalld/files/zone.xml
+    - template: jinja
+    - require:
+      - pkg: firewalld       # make sure package is installed
+    - watch_in: 
+      - service: firewalld   # restart service
+    - context:
+        name: {{ z_name }}
+        zone: {{ v }}
+
+{% endfor %}
+
+
+
+# === Parameters
+#
+# [*target*]		can be one of {'ACCEPT', '%%REJECT%%', 'DROP'}.
+#			Used to accept, reject or drop every packet that
+#			doesn't match any rule (port, service, etc.).
+#			Default (when target is not specified) is reject.
+# [*short*]		short readable name
+# [*description*]	long description of zone
+# [*interfaces*]	list of interfaces to bind to a zone
+# [*sources*]		list of source addresses or source address
+#			ranges ("address/mask") to bind to a zone
+# [*ports*]
+#   list of ports to open
+#	ports  => [{
+#		comment  => optional, string
+#		port     => mandatory, string, e.g. '1234'
+#		protocol => mandatory, string, e.g. 'tcp' },...]
+# [*services*]		list of predefined firewalld services
+# [*icmp_blocks*]	list of predefined icmp-types to block
+# [*masquerade*]	enable masquerading ?
+# [*forward_ports*]
+#   list of ports to forward to other port and/or machine
+#	forward_ports  => [{
+#		comment  => optional, string
+#		portid   => mandatory, string, e.g. '123'
+#		protocol => mandatory, string, e.g. 'tcp'
+#		to_port  => mandatory to specify either to_port or/and to_addr
+#		to_addr  => mandatory to specify either to_port or/and to_addr },...]
+# [*rich_rules*]
+#   list of rich language rules (firewalld.richlanguage(5))
+#	You have to specify one (and only one)
+#	of {service, port, protocol, icmp_block, masquerade, forward_port}
+#	and one (and only one) of {accept, reject, drop}
+#	family - 'ipv4' or 'ipv6', optional, see Rule in firewalld.richlanguage(5)
+#	source  => {  optional, see Source in firewalld.richlanguage(5)
+#		address  => mandatory, string, e.g. '192.168.1.0/24'
+#		invert   => optional, bool, e.g. true }
+#	destination => { optional, see Destination in firewalld.richlanguage(5)
+#		address => mandatory, string
+#		invert  => optional, bool, e.g. true }
+#	service - string, see Service in firewalld.richlanguage(5)
+#	port => { see Port in firewalld.richlanguage(5)
+#		portid   => mandatory
+#			protocol => mandatory }
+#	protocol - string, see Protocol in firewalld.richlanguage(5)
+#	icmp_block - string, see ICMP-Block in firewalld.richlanguage(5)
+#	masquerade - bool, see Masquerade in firewalld.richlanguage(5)
+#	forward_port => { see Forward-Port in firewalld.richlanguage(5)
+#		portid   => mandatory
+#		protocol => mandatory
+#		to_port  => mandatory to specify either to_port or/and to_addr
+#		to_addr  => mandatory to specify either to_port or/and to_addr }
+#	log => {   see Log in firewalld.richlanguage(5)
+#		prefix => string, optional
+#		level  => string, optional
+#		limit  => string, optional }
+#	audit => {  see Audit in firewalld.richlanguage(5)
+#		limit => string, optional }
+#	accept - any value, e.g. true, see Action in firewalld.richlanguage(5)
+#	reject => { see Action in firewalld.richlanguage(5)
+#		type => string, optional }
+#	drop - any value, e.g. true, see Action in firewalld.richlanguage(5)
+#
+# === Examples
+#
+#  firewalld::zone { "custom":
+#	description	=> "This is an example zone",
+#	services	=> ["ssh", "dhcpv6-client"],
+#	ports		=> [{
+#			comment		=> "for our dummy service",
+#			port		=> "1234",
+#			protocol	=> "tcp",},],
+#	masquerade	=> true,
+#	forward_ports	=> [{
+#			comment		=> 'forward 123 to other machine',
+#			portid		=> '123',
+#			protocol	=> 'tcp',
+#			to_port		=> '321',
+#			to_addr		=> '1.2.3.4',},],
+#	rich_rules	=> [{
+#			family		=> 'ipv4',
+#			source		=> {
+#				address		=> '192.168.1.0/24',
+#				invert		=> true,},
+#			port		=> {
+#				portid		=> '123-321',
+#				protocol	=> 'udp',},
+#			log		=> {
+#				prefix		=> 'local',
+#				level		=> 'notice',
+#				limit		=> '3/s',},
+#			audit		=> {
+#				limit		=> '2/h',},
+#			reject		=> {
+#				type		=> 'icmp-host-prohibited',},
+#			},],}
+#

firewalld/files/firewalld.conf

@@ -0,0 +1,35 @@
+{{pillar['headers']['salt']['file']}}
+{% set firewalld  = pillar.get('firewalld', {}) -%}
+# firewalld config file
+
+# default zone
+# The default zone used if an empty zone string is used.
+# Default: public
+DefaultZone={{ firewalld.default_zone|default('public') }}
+
+# Minimal mark
+# Marks up to this minimum are free for use for example in the direct 
+# interface. If more free marks are needed, increase the minimum
+# Default: 100
+MinimalMark={{ firewalld.minimal_mark|default('100') }}
+
+# Clean up on exit
+# If set to no or false the firewall configuration will not get cleaned up
+# on exit or stop of firewalld
+# Default: yes
+CleanupOnExit={{ firewalld.cleanup_on_exit|default('yes') }}
+
+# Lockdown
+# If set to enabled, firewall changes with the D-Bus interface will be limited
+# to applications that are listed in the lockdown whitelist.
+# The lockdown whitelist file is lockdown-whitelist.xml
+# Default: no
+Lockdown={{ firewalld.lockdown|default('no') }}
+
+# IPv6_rpfilter
+# Performs a reverse path filter test on a packet for IPv6. If a reply to the
+# packet would be sent via the same interface that the packet arrived on, the 
+# packet will match and be accepted, otherwise dropped.
+# The rp_filter for IPv4 is controlled using sysctl.
+# Default: yes
+IPv6_rpfilter={{ firewalld.IPv6_rpfilter|default('yes') }}

firewalld/files/service.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+{{pillar['headers']['salt']['xml']}}
+<service>
+{% if 'short' in service %}<short>{{ service.short }}</short>{% else %}<short>{{ name }}</short>{% endif %}
+{% if 'description' in service %}<description>{{ service.description }}</description>{% endif %}
+{% if 'ports' in service %}
+  {% if 'tcp' in service.ports %}
+    {% for v in service.ports.tcp %}<port port="{{ v }}" protocol="tcp" />{% endfor %}   
+  {% endif %}
+  {% if 'udp' in service.ports %}
+    {% for v in service.ports.udp %}<port port="{{ v }}" protocol="udp" />{% endfor %}
+  {% endif %}
+  {% if 'modules' in service %}
+    {% for v in service.modules %}<module name="{{ v }}" />{% endfor %}
+  {% endif %}
+{% endif %}
+{% if 'destinations' in service %}
+  {% if 'ipv4' in service.destinations %}
+    {% for v in service.destinations.ipv4 %}<destination ipv4="{{ v }}" />{% endfor %}
+  {% endif %}
+  {% if 'ipv6' in service.destinations %}
+    {% for v in service.destinations.ipv6 %}<destination ipv6="{{ v }}" />{% endfor %}
+  {% endif %}
+{% endif %}
+</service>

firewalld/files/zone.xml

@@ -0,0 +1,97 @@
+<?xml version="1.0" encoding="utf-8"?>
+{{pillar['headers']['salt']['xml']}}
+<zone{% if 'target' in zone %} target="{{ zone.target }}"{% endif %}>
+{% if 'short' in zone %}<short>{{ zone.short }}</short>{% else %}<short>{{ name }}</short>{% endif %}
+{% if 'description' in zone %}<description>{{ zone.description }}</description>{% endif %}
+
+{% if 'interfaces' in zone %}
+  {% for v in zone.interfaces %}<interface name="{{ v }}" />{% endfor %}
+{% endif %}
+{% if 'sources' in zone %}
+  {% for v in zone.sources %}<source name="{{ v }}" />{% endfor %}
+{% endif %}
+{% if 'services' in zone %}
+  {% for v in zone.services %}<service name="{{ v }}" />{% endfor %}
+{% endif %}
+{% if 'ports' in zone %}
+  {% for v in zone.ports %}
+    {% if 'comment' in v %}
+    <!-- {{ v.comment }} -->
+    {% endif %}
+    <port port="{{ v.port }}" protocol="{{ v.protocol }}"/>
+  {% endfor %}
+{% endif %}
+{% if 'icmp_blocks' in zone %}
+  {% for v in zone.icmp_blocks %}<icmp-block name="{{ v }}" />{% endfor %}
+{% endif %}
+{% if 'masquerade' in zone %}{% if zone.masquerade %}<masquerade/>{% endif %}{% endif %}
+{% if 'forward_ports' in zone %}
+  {% for v in zone.forward_ports %}
+    {% if 'comment' in v %}
+    <!-- {{ v.comment }} -->
+    {% endif %}
+    <forward-port port="{{ v.portid }}" protocol="{{ v.protocol }}"{% if 'to_port' in v %} to-port="{{ v.to_port }}"{% endif %}{% if 'to_addr' in v %} to-addr="{{ v.to_addr }}"{% endif %} />
+  {% endfor %}
+{% endif %}
+
+{% if 'rich_rules' in zone %}
+  {% for rule in zone.rich_rules %}
+    {% if 'family' in rule %}
+    <rule family="{{ rule.family }}">
+    {% else %}
+    <rule>
+    {% endif %}    
+    {% if 'source' in rule %}
+    <source address="{{ rule.source.address }}" {% if 'invert' in rule.source %}invert="{{ rule.source.invert }}"{% endif %}/>
+    {% endif %}    
+    {% if 'destination' in rule %}
+    <destination address="{{ rule.destination.address }}" {% if 'invert' in rule.destination %}invert="{{ rule.destination.invert }}"{% endif %}/>
+    {% endif %}    
+    {% if 'service' in rule %}
+    <destination name="{{ rule.service }}"/>
+    {% endif %}    
+    {% if 'port' in rule %}
+    <port port="{{ rule.port.portid }}" protocol="{{ rule.port.protocol }}"/>
+    {% endif %}    
+    {% if 'protocol' in rule %}
+    <protocol value="{{ rule.protocol }}"/>
+    {% endif %}    
+    {% if 'icmp_block' in rule %}
+    <icmp_block name="{{ rule.icmp_block }}"/>
+    {% endif %}    
+    {% if 'masquerade' in rule %}
+      {% if rule.masquerade %}<masquerade/>{% endif %}
+    {% endif %}    
+    {% if 'forward_port' in rule %}
+      {% if 'comment' in rule.forward_port %}
+        <!-- {{ rule.forward_port.comment }} -->
+      {% endif %}
+      <forward-port port="{{ rule.forward_port.portid }}" protocol="{{ rule.forward_port.protocol }}"{% if 'to_port' in rule.forward_port %} to-port="{{ rule.forward_port.to_port }}"{% endif %}{% if 'to_addr' in rule.forward_port %} to-addr="{{ rule.forward_port.to_addr }}"{% endif %} />
+    {% endif %}    
+    {% if 'log' in rule %}
+    <log{% if 'prefix' in rule.log %} prefix="{{ rule.log.prefix }}"{% endif %}{% if 'level' in rule.log %} level="{{ rule.log.level }}"{% endif %}>
+      {% if 'limit' in rule.log %}
+      <limit value="{{ rule.log.limit }}"/>
+      {% endif %}
+    </log>
+    {% endif %}    
+    {% if 'audit' in rule %}
+    <audit>{% if 'limit' in rule.audit %} <limit value="{{ rule.audit.limit }}"/>{% endif %}</audit>
+    {% endif %}    
+    {% if 'accept' in rule %}
+      <accept/>
+    {% endif %}    
+    {% if 'reject' in rule %}
+      <reject{% if 'type' in rule.reject %} type="{{ rule.reject.type }}"{% endif %}/>
+    {% endif %}    
+    {% if 'drop' in rule %}
+      <drop/>
+    {% endif %}    
+    </rule>
+  {% endfor %}
+{% endif %}
+
+</zone>
+
+
+

firewalld/init.sls

@@ -0,0 +1,41 @@
+
+# == State: firewalld
+#
+# This state installs/runs firewalld.
+#
+
+
+{% if salt['pillar.get']('firewalld:enabled') %}
+include:
+  - firewalld._config
+  - firewalld._service
+  - firewalld._zone
+
+# iptables service that comes with rhel/centos
+iptables:
+  service:
+    - disabled
+    - enable: False
+    
+ip6tables:
+  service:
+    - disabled
+    - enable: False
+
+firewalld:
+  pkg:
+    - installed
+  service:
+    - running              # ensure it's running
+    - enable: True         # start on boot
+    - require:
+      - pkg: firewalld
+      - file: /etc/firewalld/firewalld.conf # require this file
+      - service: iptables         # ensure it's stopped
+      - service: ip6tables        # ensure it's stopped
+{% else %}
+firewalld:
+  service:
+    - dead                 # ensure it's not running
+    - enable: False        # don't start on boot
+{% endif %}

pillar.example.sls

@@ -0,0 +1,56 @@
+# CentOS7 FirewallD firewall
+firewalld:
+  enabled: True
+  default_zone: public
+  services:
+    sshcustom:
+      short: sshcustom
+      description: SSH on port 3232 and 5252. Secure Shell (SSH) is a protocol for logging into and executing commands on remote machines. It provides secure encrypted communications. If you plan on accessing your machine remotely via SSH over a firewalled interface, enable this option. You need the openssh-server package installed for this option to be useful.
+      ports:
+        tcp: 
+          - 3232
+          - 5252
+      modules: 
+        - some_module_to_load
+      destinations:
+        ipv4: 
+          - 224.0.0.251
+          - 224.0.0.252
+        ipv6: 
+          - ff02::fb
+          - ff02::fc
+  zones:
+    public:
+      short: Public
+      description: "For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted."
+      services:
+        - http
+        - https
+        - ssh
+        - dhcpv6-client
+#      ports: 
+#        - comment: For our dummy service
+#          port: 1234
+#          protocol: tcp
+#      forward_ports:
+#        - comment: forward 123 to other machine
+#          portid: 123
+#          protocol: tcp
+#          to_port: 321
+#          to_addr: 1.2.3.4
+#      rich_rules:
+#        - family: ipv4
+#          source:
+#            address: 192.168.1.0/24
+#            invert: true
+#          port:
+#            portid: 123-321
+#            protocol: udp
+#          log:
+#            prefix: local
+#            level: notice
+#            limit: 3/s
+#          audit:
+#            limit: 2/h
+#          reject:
+#            type: icmp-host-prohibited