Limnoria/INSTALL.md

# Common

**Note: there is easier [installation guide in documentation!](http://doc.supybot.aperio.fr/en/latest/use/install.html)**

First things first: Supybot *requires* at least Python 2.6.  There
isn't any way to get around it.  You can get it from [Python homepage].

[Python homepage]:http://python.org/

# Recommended Software

The following libraries are not needed for running Limnoria, but enable
extra features you may want. (Order by decreasing estimated usefulness)

[charade] -- enables better encoding handling

[pytz] and [python-dateutil] -- enable additional features of the `Time` plugin

[python-gnupg] -- enables user authentication with GPG

[charade]:https://pypi.python.org/pypi/charade
[pytz]:https://pypi.python.org/pypi/pytz
[python-dateutil]:https://pypi.python.org/pypi/python-dateutil
[python-gnupg]:https://pypi.python.org/pypi/python-gnupg

To install them, run 

`pip install -r requirements.txt`

or if you don't have or don't want to use root, 

`pip install -r requirements.txt --user`

For more information and help on how to use Supybot, checkout
the documents under [docs/], especially [GETTING_STARTED] and
[CONFIGURATION], or on [the website]

[docs/]:docs/index.rst
[GETTING_STARTED]:docs/GETTING_STARTED.rst
[CONFIGURATION]:docs/CONFIGURATION.rst
[the website]:http://supybot.aperio.fr/doc/use/index.html

So what do you do?  That depends on which operating system you're
running.  We've split this document up to address the different
methods, so find the section for your operating system and continue
from there.

# UNIX/Linux/BSD

If you use [Debian or Ubuntu, click here](INSTALL.md#debian) or [Fedora, click here.](INSTALL.md#fedora)

If you're installing Python using your distributor's packages, you may
need a python-dev or python3-dev package installed, too.  If you don't have
a '/usr/lib/python2.x/distutils' directory or 
'/usr/lib/python2.x/config/Makefile' or with Python 3 
'/usr/lib/python3.x/distutils' or '/usr/lib/python3.x/config/Makefile' (assuming '/usr/lib/python2.x' or '/usr/lib/python3.x' is where your Python 
libs are installed), then you will need a python-dev or python3-dev package.

## git

First start by git cloning Limnoria and moving to the cloned repository.

```
git clone https://github.com/ProgVal/Limnoria.git
cd Limnoria
```

The rest depends on do you have root access and do you want to perform global or local install.

### Global install

Run

```
python setup.py install
```

`python` can be replaced with `python2` (if your distribution 
uses Python 3 by default) or `python3` if you want to use Python 3 
version.

Now you have several new programs installed where Python scripts are normally
installed on your system ('/usr/bin' or '/usr/local/bin' are common on
UNIX systems).  The two that might be of particular interest to you, the
new user, are 'supybot' and 'supybot-wizard'.  The former, 'supybot', is
the script to run an actual bot; the latter, 'supybot-wizard', is an
in-depth wizard that provides a nice user interface for creating a
registry file for your bot.

### Local install

Run

```
python setup.py install --user
```

`python` can be replaced with `python2` (if your distribution 
uses Python 3 by default) or `python3` if you want to use Python 3 
version.

and you will have new programs installed in ~/.local/bin. The two that might be of particular interest to you, the
new user, are 'supybot' and 'supybot-wizard'.  The former, 'supybot', is
the script to run an actual bot; the latter, 'supybot-wizard', is an
in-depth wizard that provides a nice user interface for creating a
registry file for your bot.

By default you must run the bot with full path to the binary unless you specify $PATH.

Run the following command to fix your PATH. We presume that you use bash 
and if you don't, you most probably know how to do this with other shell.

```
echo 'PATH="$HOME/.local/bin:$PATH"' >> ~/.bashrc
source ~/.bashrc
```

## Debian

*Debian packages are automatically build nightly at 00:00Z.*

For Debian and other distributions based on it (Ubuntu etc.), there are
packages which you can install with

```
wget http://builds.progval.net/limnoria/debian/python2/limnoria-master-HEAD.deb
sudo dpkg -i limnoria-master-HEAD.deb
```

## Fedora

*Fedora packages are automatically build nightly at 00:00Z.*

For Fedora and other distributions using rpm (RHEL, CentOS etc.), there are
packages which you can install with

```
yum install http://builds.progval.net/limnoria/fedora/python2/limnoria-master-HEAD.noarch.rpm
```

## Pip

To install with pip run

```
sudo pip install -r https://raw.githubusercontent.com/ProgVal/Limnoria/master/requirements.txt
sudo pip install git+https://github.com/ProgVal/Limnoria.git@master
```

or without root if you don't have it or don't want to use it.

```
pip install -r https://raw.githubusercontent.com/ProgVal/Limnoria/master/requirements.txt --user
pip install git+https://github.com/ProgVal/Limnoria.git@master --user
```

If you wish to use Python 3 or 2 instead of default of your distribution 
run `pipX` where X is either 2 or 3 instead of `pip`.

If pip gives error immediately instead of doing anything and you have git$ installd, try upgrading pip with `sudo pip install pip --upgrade` or without
root, `pip install pip --upgrade --user`.

### Upgrading

#### git

To upgrade, return to the cloned Limnoria repository and run:

```
git pull
```

and then install Limnoria normally. "python setup.py install" doesn't affect config files of the bot any way.

If you don't have the cloned Limnoria repository, clone it again using the installation instructions.

### Debian/Fedora

Run the same commands as before on [Debian](INSTALL.md#debian) or 
[Fedora](INSTALL.md#fedora) section of this file.

### Pip

Run the first install command again, but add `--upgrade` to the 
end. Then run the second install command.

## Upgrading to Python 3

Upgrading Python3 happens the same way, but if you want to move from 2 to 3 
or 3 to 2, you must remove the build/ directory and the executable 
supybot* files first. The build/ directory is on same directory as this 
file and supybot* are usually in /usr/local/bin or ~/.local/bin

```
rm -rf build/
rm /usr/local/bin/supybot*
rm ~/.local/bin/supybot*
```

## Windows

**Note**: If you are using an IPV6 connection, you will not be able
to run Supybot under Windows (unless Python has fixed things).  Current
versions of Python for Windows are *not* built with IPV6 support. This
isn't expected to be fixed until Python 2.4, at the earliest.

Now that you have Python installed, open up a command prompt.  The
easiest way to do this is to open the run dialog (Programs -> run) and
type "cmd" (for Windows 2000/XP/2003) or "command" (for Windows 9x).  In
order to reduce the amount of typing you need to do, I suggest adding
Python's directory to your path.  If you installed Python using the
default settings, you would then do the following in the command prompt
(otherwise change the path to match your settings)::

```
set PATH=C:\Python2x\;%PATH%
```

You should now be able to type 'python' to start the Python
interpreter.  Exit by pressing CTRL-Z and then Return.  Now that that's
setup, you'll want to cd into the directory that was created when you
unzipped Supybot; I'll assume you unzipped it to 'C:\Supybot' for these
instructions.  From 'C:\Supybot', run 

```
python setup.py install
```

This will install Supybot under 'C:\Python2x\'.  You will now have several new
programs installed in 'C:\Python2x\Scripts\'.  The two that might be of
particular interest to you, the new user, are 'supybot' and 'supybot-wizard'.
The former, 'supybot', is the script to run an actual bot; the latter,
'supybot-wizard', is an in-depth wizard that provides a nice user interface for
creating a registry file for your bot.