3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-27 19:22:34 +01:00
iwd/autotests/testSAE/connection_test.py
James Prestwood e296a61e3f auto-t: refactor/fix testSAE
The SAE test made some assumptions on certain conditions due to
there being no way of checking if those conditions were met
Mainly the use of H2E/hunt-and-peck.

We assumed that when we told hostapd to use H2E or hunt/peck it
would but in reality it was not. Hostapd is apparently not very
good at swapping between the two with a simple "reload" command.
Once H2E is enabled it appears that it cannot be undone.
Similarly the vendor elements seem to carry over from test to
test, and sometimes not which causes unintended behavior.

To fix this create separate APs for the specific scenario being
tested:
 - Hunt and peck
 - H2E
 - Special vendor_element simulating buggy APs

Another issue found was that if password identifies are used
hostapd automatically chooses H2E which was not intented, at
least based on the test names (in reality it wasn't causing any
problems).

The tests have also been improved to use hostapds "sta_status"
command which contains the group number used when authenticating,
so now that at least can be verified.
2024-02-27 13:55:37 -06:00

99 lines
2.9 KiB
Python

#!/usr/bin/python3
import unittest
import sys
sys.path.append('../util')
import iwd
from iwd import IWD
from iwd import PSKAgent
from iwd import NetworkType
from hostapd import HostapdCLI
import testutil
class Test(unittest.TestCase):
def validate_connection(self, wd, ssid, hostapd, expected_group):
psk_agent = PSKAgent("secret123")
wd.register_psk_agent(psk_agent)
devices = wd.list_devices(1)
self.assertIsNotNone(devices)
device = devices[0]
device.disconnect()
network = device.get_ordered_network(ssid, full_scan=True)
self.assertEqual(network.type, NetworkType.psk)
network.network_object.connect(wait=False)
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
wd.wait(2)
testutil.test_iface_operstate(intf=device.name)
testutil.test_ifaces_connected(if0=device.name, if1=hostapd.ifname)
sta_status = hostapd.sta_status(device.address)
self.assertEqual(int(sta_status["sae_group"]), expected_group)
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(network.network_object, condition)
wd.unregister_psk_agent(psk_agent)
def test_SAE(self):
self.hostapd.wait_for_event("AP-ENABLED")
self.validate_connection(self.wd, "ssidSAE", self.hostapd, 19)
def test_SAE_force_group_19(self):
# Vendor data from APs which require group 19 be used first
self.hostapd.reload()
self.hostapd.wait_for_event("AP-ENABLED")
self.validate_connection(self.wd, "ssidSAE-default-group", self.hostapd_defgroup, 19)
def test_SAE_Group20(self):
self.hostapd.set_value('sae_groups', '20')
self.hostapd.reload()
self.hostapd.wait_for_event("AP-ENABLED")
self.validate_connection(self.wd, "ssidSAE", self.hostapd, 20)
def test_SAE_H2E(self):
self.hostapd_h2e.set_value('sae_groups', '19')
self.hostapd_h2e.reload()
self.hostapd_h2e.wait_for_event("AP-ENABLED")
self.validate_connection(self.wd, "ssidSAE-H2E", self.hostapd_h2e, 19)
def test_SAE_H2E_Group20(self):
self.hostapd_h2e.set_value('sae_groups', '20')
self.hostapd_h2e.reload()
self.hostapd_h2e.wait_for_event("AP-ENABLED")
self.validate_connection(self.wd, "ssidSAE-H2E", self.hostapd_h2e, 20)
def setUp(self):
self.hostapd.default()
self.wd = IWD(True)
def tearDown(self):
self.wd.clear_storage()
self.wd = None
@classmethod
def setUpClass(cls):
cls.hostapd = HostapdCLI(config='ssidSAE.conf')
cls.hostapd_h2e = HostapdCLI(config='ssidSAE-H2E.conf')
cls.hostapd_defgroup = HostapdCLI(config='ssidSAE-default-group.conf')
@classmethod
def tearDownClass(cls):
pass
if __name__ == '__main__':
unittest.main(exit=True)