iwd/doc/test-runner.txt

Notes for test-runner usage
***************************

Tool Description
================

test-runner is an automated test execution tool for IWD. It is capable of
creating the emulated environments representing a variety of network topologies
and run the automated tests of IWD functionality.


Software Prerequisites
======================

The test-runner tool requires the following binaries to be present on the host
OS:

	Name:			Tested ver.:
	 1. qemu		2.4.1
	 2. Linux kernel	4.20
	 3. dbus-daemon		1.11.18
	 4. ifconfig		2.10-alpha
	 5. iw			3.17
	 6. python		2.7
	 7. haveged		no ver. avail.
	 8. hostapd		commit id: 31d3692
	 9. <iwd>/tools/hwsim	0.0
	10. <iwd>/src/iwd	0.0

Note: You will need ell-key-crypto branch, not the master branch from the tree
in step 2 above.

Note: The test-runner mounts host's file system in readonly mode and executes
the above binaries inside of an emulated environment directly from it.

Note: Running EAP-SIM/AKA/AKA' tests using oFono will require oFono and
phonesim to be installed on the host. This is explained further in the
"Running with oFono and phonesim" section.

Building Kernel
===============

The test-runner tool requires a kernel that is at least build with these
minimal options for a successful boot and execution:

	<arch>_defconfig 			Default kernel configuration

	kvmconfig				Default configuration for
						kvm guests

	<iwd>/tools/test_runner_kernel_config	The test-runner specific
						configuration

These configurations should be installed as .config in the kernel source
directory. To make a x86_64 guest kernel the sequence of commands may look
as follows:

	$ cd linux-X.X.X

	$ make x86_64_defconfig

	$ make kvmconfig

	$ sh <iwd>/tools/test_runner_kernel_config

	$ make olddefconfig

After that a default kernel with the required options can be built:

	$ make -j$(nproc)

Note: To catch locking related issues the following set of kernel config
options may be useful:

	CONFIG_LOCKDEP_SUPPORT=y
	CONFIG_DEBUG_SPINLOCK=y
	CONFIG_DEBUG_LOCK_ALLOC=y
	CONFIG_PROVE_LOCKING=y
	CONFIG_LOCKDEP=y
	CONFIG_DEBUG_MUTEXES=y

By default the test-runner will search for the kernel image in these locations:

	<iwd>/tools/bzImage

		or

	<iwd>/tools/arch/x86/boot/bzImage

An arbitrary kernel image location can be specified by using '--kernel <path>'
parameter into test-runner.


Running Automated Tests
=======================
Before running any tests, its expected that the folder /var/lib/iwd exists on
the host machine. If not, you will see a mounting error when starting
test-runner.

	mkdir /var/lib/iwd

By default, the automated test configuration directories reside in
'<iwd>/autotests' and have a mandatory prefix of 'test'.

	<iwd>/autotests/test1
                       /test2
                         ...

The test configurations along with test cases in <iwd>/autotests/test*
directories will be discovered and executed by test-runner in sequential
fashion. The following set of commands is sufficient to run the automated
tests shipped with IWD:

	$ cd <iwd>/tools

	$ sudo ./test-runner

One can specify a particular set of test configurations to be executed by using
'-t <dir1,dir2>' parameter. An absolute path is necessary for the test
configuration directories outside of <iwd>/autotests.

The command line may look as follows:

	$ sudo ./test-runner -t test1,test3,/home/test4


Creating Test Configurations
============================

A typical test configuration directory may consist of these types of files:

	hw.conf			Defines the network configuration and
				properties of the radios.

	*Test or *Test.py	The set of test cases for IWD functionality
				implemented using Python scripting language.
				These files must have one of the two predefined
				suffixes: 'Test' or 'Test.py'

	*.conf			A configuration file for an instance of hostapd
	(Defined in hw.conf)	service.

Each configuration directory has exactly one hw.conf, where the number of
Python script files is virtually unlimited. The number of hostapd configuration
files is bounded by the limitation in mac80211_hwsim driver and is set
to 99. (The mac80211_hwsim driver allows to create 100 of simultaneous radios
and one of them is reserved by the test-runner for IWD)

A typical contents of a test configuration directory may look as follows:

	 /test1/hw.conf
		ap1.conf
		ap2.conf
		networkScanTest
		networkConnectTest.py


Defining Network
----------------
Network topology along with configuration for the automated test cases is
predetermined in hardware configuration file 'hw.conf'. In addition, it allows
to establish the relationships between the emulated hardware radios and
services that represent various entities of a wireless network.

The following sample hardware configuration file allows to emulate a network
of three nodes. Two of which are access points and the third one represents a
supplicant running IWD:

#~~~~~~~~~~~~~~~~~~~~~~~~~ hw.conf ~~~~~~~~~~~~~~~~~~~~~~~~~
# Lines starting with # are ignored

# 'SETUP' is a manditory configuration group.
[SETUP]
#
# Total number of radios requested per network setup. This includes
# the radios used by APs as well as one for IWD. This field is mandatory and
# has a range of [1, 100].
num_radios=3

# Definition of the radio configuration identifiers. These identifiers are used
# to map the APs and IWD to the radios with the particular hardware properties.
# This field is optional. If identifier is omitted from this list, then the
# default radio properties will be used as they are defined in mac80211_hwsim
# driver to satisfy a total number of radios requested in 'num_radios' field.
radio_confs=rad0:rad1

# Maximum execution interval per Python script file in seconds. This field is
# optional.
# Default: 20 seconds.
#max_test_exec_interval_sec=5

# List of paths inside of a test configuration directory for which
# the symlinks will be created inside of /tmp. Such paths can be used
# to specify an absolute path to the needed files inside of IWD and Hostapd
# configuration files.
# Example:
#	 <some path>/test1/certs
#		           misc
#
# certs and misc directories will be respectively mapped to:
#
#	 /tmp/certs
#	      misc
#
# This field is optional.
#tmpfs_extra_stuff=certs:misc

# Flag to prevent test-runner from starting IWD. Therefore, it may later be
# started from the python test cases.
# This field is optional. Default: 1 (true)
#start_iwd=0

# Configuration directory to use for IWD daemon. IWD expects 'main.conf' to be
# inside of the specified directory.
# This field is optional. Default: /etc/iwd
#iwd_config_dir=/etc/iwd

#
# The following two configuration groups are examples of the radio
# configurations.
#
# This group of settings allows to specify a set of properties for a radio. The
# name of the group represents a radio identifier and must be predefined in
# 'radio_confs' field inside of 'SETUP' group. This configuration group is
# optional.
# TODO: explain each one of the properties.
[rad0]
channels=2
p2p_device=1
use_chanctx=1

# Properties of the second radio. This configuration group is optional.
[rad1]
p2p=0

# 'HOSTAPD' configuration group identifies a set of access points (AP) for the
# current network topology. Each key/value pair represents a single AP that is
# emulated by the instance of hostapd service. The key indicates an arbitrary
# radio identifier and value specifies a configuration file for the instance.
# If a radio identifier can not be mapped to a predefined radio configuration
# (identifier is not part of the 'radio_confs' list), then a radio with the
# default configuration is used. This configuration group is optional.
[HOSTAPD]
rad0=ap1.conf
rad1=ap2.conf
#~~~~~~~~~~~~~~~~~~ end of hw.conf ~~~~~~~~~~~~~~~~~~~~~~~~~


Configuring Access Points
-------------------------
The test-runner tool makes use of the hostapd service to emulate the access
points (AP). Despite the fact that hostapd service comes preinstalled on most
Linux distributions, test-runner uses some of the recently introduced features,
which may only be available from the master tree of the hostapd repository:

	git://w1.fi/srv/git/hostap.git

		OR (its HTTP version)

	http://w1.fi/hostap.git

commit id: 31d3692fe5d56c05753ed4a70c7943979e1d29e7 or above is required.

The sequence of commands to clone, build and install hostapd may look as
follows:

	$ git clone git://w1.fi/srv/git/hostap.git

	$ cd hostap/hostapd

	$ cp defconfig .config

	$ vi .config

	Find the following lines:

		#CONFIG_DRIVER_NL80211=y
		#CONFIG_LIBNL32=y

	and uncomment it by removing the '#' sign.

	For WPS tests uncomment the following:

		#CONFIG_WPS=y

	For 802.11r (fast roaming) tests uncomment the following:

		#CONFIG_IEEE80211R=y
		#CONFIG_WNM_AP=y
		#CONFIG_WNM=y

	For EAP-SIM/AKA tests uncomment the following:

		#CONFIG_EAP_SIM=y
		#CONDIG_EAP_AKA=y
		#CONFIG_EAP_AKA_PRIME=y

	For EAP-PWD tests uncomment the following:

		#CONFIG_EAP_PWD=y

	For SAE tests add the following lines:

		CONFIG_SAE=y
		CONFIG_OWE=y
		CONFIG_DPP=y

	For pre-authentication tests add the following:

		CONFIG_RADIUS_SERVER=y

	For High Throughput tests add the following:

		CONFIG_IEEE80211N=y
		CONFIG_IEEE80211AC=y

	Note: You may need to pre-install: 'gnutls-devel' and 'libgcrypt-devel'
	libraries.

	$ make install

Note: If 'make install' fails with the netlink warnings you may need to
install libnl-1.0pre8 (or later).

Note: It is recommended to override the pre-installed version of hostapd with
the newly built one to avoid any confusion. The simplest way to make sure
that the correct version of hostapd is used is to execute the following
command:

	$ hostapd -h

Make sure that '-i' option is available in the list of option.
For more information on hostapd refer to this page:

	http://linuxwireless.org/en/users/Documentation/hostapd/

A full set of the hostapd configurations along with explanation can be
found at:

	https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf

Note: for EAP-SIM/AKA/AKA' hostapd needs an authenticator running separately.
IWD has a python version of hostapd's "hlrauc.c". This may work out of the box
on your system, but the pycrypto library is required. This can be installed
with python pip3:

	sudo pip3 install pycrypto

Running with oFono and phonesim
-------------------------------
EAP-SIM/AKA/AKA' require SIM card access to perform the authentication
algorithms. This is achieved in test runner using oFono and phonesim. If
either oFono or phonesim are not found when test runner starts, any test
involving oFono will be skipped. Using the option "sim_keys=ofono" in the
hardware config file will tell test runner that the test should use oFono.
There is some setup that needs to be done before test runner will work with
ofono/phonesim

setup ofono:

	$ git clone git://git.kernel.org/pub/scm/network/ofono/ofono.git
	$ cd ofono
	$ ./bootstrap-configure
	$ make install

setup phonesim:

	$ git clone git://git.kernel.org/pub/scm/network/ofono/phonesim.git
	$ cd phonesim
	$ ./bootstrap-configure
	$ make install

Now test runner should pick up both installed binaries.

Note: EAP-SIM/AKA/AKA' can also be tested using the hardcoded SIM plugin. This
just reads hardcoded SIM values from a local file. Tests using this plugin
should not need any additional setup. This plugin is enabled by setting
"sim_keys=<file>" in the hardware config file.

Writing Python Test Scripts
---------------------------
The test-runner tool relies on test cases written in Python script language
to exercise the functionality of IWD. The outcomes of the tests are determined
by the exit status of a process running test and reported on per Python file
bases. The test creators are highly encouraged to use the Python unit test
framework.

For more information on Python unit test framework refer to the following page:

	http://pyunit.sourceforge.net/pyunit.html


Examples of the framework usage:

#~~~~~~~~~~~~~~~~~~~~~~~~~ alwaysPassingTest.py ~~~~~~~~~~~~~~~~~~~~~~~~~
#!/usr/bin/python

import unittest

class TestPassingCase(unittest.TestCase):

	def test_pass(self):
		self.assertTrue(True)

if __name__ == '__main__':
	unittest.main()
#~~~~~~~~~~~~~~~~~~ end of alwaysPassingTest.py ~~~~~~~~~~~~~~~~~~~~~~~~~

#~~~~~~~~~~~~~~~~~~~~~~~~~ alwaysFailingTest.py ~~~~~~~~~~~~~~~~~~~~~~~~~
#!/usr/bin/python

import unittest

class TestFailingCase(unittest.TestCase):

	def test_fail(self):
		self.assertTrue(False)

if __name__ == '__main__':
	unittest.main()
#~~~~~~~~~~~~~~~~~~ end of alwaysFailingTest.py ~~~~~~~~~~~~~~~~~~~~~~~~~