Background ========== - Priority scale: High, Medium and Low - Complexity scale: C1, C2, C4 and C8. The complexity scale is exponential, with complexity 1 being the lowest complexity. Complexity is a function of both task 'complexity' and task 'scope'. The general rule of thumb is that a complexity 1 task should take 1-2 weeks for a person very familiar with the codebase. Higher complexity tasks require more time and have higher uncertainty. Higher complexity tasks should be refined into several lower complexity tasks once the task is better understood. mac80211_hwsim ============== - Add support for HWSIM_CMD_SET_RADIO command To allow modifying an existing radio, add the HWSIM_CMD_SET_RADIO. The first possible feature should be to emulate the hardware RFKILL switch. It might be required to add a HWSIM_ATTR_RADIO_HW_RFKILL attribute flag to the HWSIM_CMD_NEW_RADIO to enable virtual radios with a hardware level RFKILL switch. Priority: Medium Complexity: C1 - Allow configuration of MAC address or list of MAC addresses The radios are auto-generating a fake MAC address. It would be useful to allow specifying a MAC address to be used. In certain cases it might be also useful to provide a list of MAC addresses so that for example with secondary interfaces these can be used. Priority: Low Complexity: C2 - Move mac80211_hwsim.h header file to UAPI includes The mac80211_hwsim.h is the public API description of this netlink interface and thus it should be provided via UAPI includes. For this work work the mac80211_hwsim.h header needs to be modified so that it also compiles from userspace. At the moment it throws errors. And it needs to become part of the UAPI headers of the Linux kernel. In addition it should provide HWSIM_GENL_NAME that provides the generic netlink "MAC82011_HWSIM" family string. Priority: Low Complexity: C1 - Provide kernel option to allow defining the number of initial radios By default the mac80211_hwsim modules creates 2 radios by default unless it is overwritten with the radios=x module parameter. To allow loading the mac80211_hwsim by default and even with accidental loading of the module, it would be good to provide a kernel configuration option that allows changing the default value here. For our testing we want to load mac80211_hwsim without any radios. Maybe this should be the default for the new kernel option. If the default of initial radios can be changed to zero, then it is also possible to add MODULE_ALIAS_GENL_FAMILY to support auto-loading of the mac80211_hwsim kernel module. Priority: Low Complexity: C1 - New configuration options for radios At the moment the radios created are all equal and feature rich. However for testing we want to create radios with different emulated hardware capabilities. Provide new attributes or flags that allow enabling or disabling certain mac80211 features. For example AP mode, P2P mode, number of interface combinations, TDLS support, number of Scan SSIDs, supported ciphers and so on. Priority: Low Complexity: C2 Wireless monitor ================ - Add support for PACKET_RECV_OUTPUT socket option of AF_PACKET Instead of having to switch every interface manually into promiscuous mode, it would be useful to set PACKET_RECV_OUTPUT to receive also the traffic that leaves the system. This would make tracing PAE / EAPoL traffic easy and provides better sniffing capabilities. Unfortunately, PACKET_RECV_OUTPUT logic is not implemented at all in the kernel. So, first implement it in the kernel, and then use it in nlmon.c as a set_sockopt option. Priority: Low Complexity: C8 - Subscribe to all nl80211 multicast groups at startup It seems the nlmon packets are limited to actual subscribed mutlicast groups. To get a complete picture of all the nl80211 commands and events, it is required that iwmon adds membership to all multicast groups that the nl80211 lists. This means that the netlink socket used for resolving nl80211 family name needs to be kept open and actively processed since it will also receive these multicast events. However the event itself can be dropped since the one from nlmon with the proper kernel level timestamps should be taken into account. An alternative is to fix the netlink_deliver_tap() function in the kernel netlink layer to not be affected by the broadcast filtering. Priority: Medium Complexity: C1 - Print the 'group' of the decoded message Whenever an event / message is received, iwmon should print the genl group of the message (e.g. mlme, scan, config, regulatory). This will make it easier to add handling of such events / commands inside iwd. Priority: Medium Complexity: C1 Wireless simulator ================== - Add support for builtin wireless access point emulator When creating a pair of mac80211_hwsim radios, allow one to operate as access point. The hwsim utility will emulate the access point on the second interface for as long as it is running. Which means that from the first interface it is possible to scan and connect to this access point using standard wireless tools (including iwd and iwctl). Code for the AP mode can be shared from iwd feature for access point operation once that has been implemented. Priority: Medium Complexity: C8 Wireless daemon =============== - Add unit test data with 2nd RSNE in Authenticator 3/4 message The specification allows the AP to send a second RSN element in its 4-way handshake message 3/4. Find some test data for this case and create a unit test case. Priority: Low Complexity: C1 - Handle "Use group cipher suite" option for pairwise ciphers If the AP specifies "Use group cipher suite" as its only pairwise suite, then handle this appropriately inside EAPoL handshaking code. The install_gtk callback might need to be modified to handle this case. Priority: Low Complexity: C1 - Add support for PMK Caching from 802.11-2007. This is sometimes referred to as "fast, secure roam back". Essentially the client caches PMKIDs generated when connecting to various APs. If the client roams back to an AP that has already been connected to, and the PMK is cached by both, then the 802.1X exchange can be skipped. Priority: Low Complexity: C4 - Add support for Opportunistic Key Caching (OKC). This is not defined by any 802.11 standards, but is made available by major vendors such as Cisco and Microsoft. Priority: Low Complexity: C4 - Add support for Automatic Power Save Delivery (APSD). This includes scheduled (s-APSD) and unscheduled (u-APSD). This will require rudimentary support of WMM protocol. This feature was introduced in 802.11e. Priority: Low Complexity: C4 - Add support for 802.11u. This is required for Passpoint 2.0 support. Priority: Low Complexity: C8 - Add support for Wireless Network Management (WNM) from 802.11v. Parts of this are needed for Passpoint support. Priority: Low Complexity: C8 - Add support for Tunneled Direct Link Setup (TDLS) from 802.11z. Priority: Medium Complexity: C8 - Add support for WiFi P2P. iwd will require a new P2P D-Bus API to be exposed in order for clients to manage P2P connections. P2P specific logic for device management and switching between P2P and STA/AP modes for a particular interface will be required. Priority: Medium Complexity: C8 - Add support for EAP-LEAP. This is a Cisco proprietary EAP method that is quite widespread. Priority: Medium Complexity: C4 - Add support for EAP-OTP. OTP stands for 'One Time Password' and can be found in RFC3784. Priority: Low Complexity: C4 - Take EAP MSK size into consideration. MSK is mandated to be 64 bytes long, and depending on the AKM, different parts of the MSK are used to generate keys. Some EAP methods produce MSKs with less than 64 bytes of useable data. For example, LEAP produces only 16 bytes and MSCHAPv2 produces 32 bytes. If the AKM requires MSK of a certain size, and the EAP method does not provide enough data, then the handshake should be aborted. Priority: Medium Complexity: C2 - Implement Enrollee Session Overlap Detection after WSC Protocol Run WSC Best Practices v2.0.1, Section 3.15 describes an enhacement to detect PBC session overlaps. The Enrollee is asked to perform an extra scan without the PBC request in the ProbeRequest frames after EAP-WSC completes successfully. If another AP in PBC mode is found, then a SessionOverlap error should be reported to the user. Priority: Low Complexity: C2 - DPP Support Device Provisioning Protocol is a new specification from WiFi Alliance. This allows devices to be provisioned, typically via a QR code. Priority: Low Complexity: C8 - Support receiving OCE FILS Discovery Frames When operating in station mode, we should support receiving of FILS Discovery frames. Priority: Medium Complexity: C2 - Support OCE Reduced Neighbor Reports OCE specifies that the AP can send Reduced Neighbor Reports if the STA sets the FILS Capability bit to true. Reduced Neighbor Reports can be used to replace the need to scan, particularly if the AP reports RNR Completeness attribute. RNRs can be sent in Probe Responses, Beacons and FILS Discovery frames. Priority: Medium Complexity: C2 - Support OCE Scanning OCE Specifies various scanning optimizations. When OCE scanning is enabled, (e.g. when OCE APs are detected, or via some other means), enable the relevant optimizations if driver support is present: NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION Priority: Medium Complexity: C2 - Support OCE mutually non-overlapping channels optimization. OCE Section 3.10 mandates that the STA should scan channels 1, 6 and 11 in the 2.4Ghz band first, unless it expects to find an AP on a different channel. Priority: Low Complexity: C1 - Support OCE RSSI-based Association Rejection attribute OCE APs can reject a Re(Association) request with Status Code 34 and optionally include RSSI-based Association Rejection attribute. This attribute can either contain a time delay information or an RSSI delta value. If the time delay info is included, make sure that this particular BSS is blacklisted only for the duration of the delay. If RSSI delta is included, make sure to handle that as well. Priority: Low Complexity: C1 - Support additional metrics sent by OCE APs OCE APs can send BSS Load and Extended BSS Load IEs. iwd already takes the BSS Load IE into account for ranking purposes. If Extended BSS Load IE is present, it should be taken into account as well. Additionally, Estimated Service Parameter (ESP) and Reduced WAN Metrics should be taken into account if available. Priority: Low Complexity: C4 - Support OCE FILS Indication element OCE APs that support FILS authentication can notify which domains they support. This information is made available using the FILS Indication element as part of the Probe Response and Beacon frames. Priority: Low Complexity: C4 - Support OCE Higher Layer Protocol Encapsulation This can be used to obtain DHCPv4 address faster. Priority: Medium Complexity: C4 - Support Diagnostics interface The diagnostic interface for a particular Device would contain information (and possibly operations) that would be meant for diagnostics applications or other applications that require access to very low level details. Such applications would be expected how to interpret this information appropriately. This interface would also be heavily utilized by the Auto-Test framework in order to more easily ascertain the internal state of the hardware & the daemon itself. The list of possible information exposed via this interface includes: - MAC address of the currently connected AP (in a Station) - MAC addresses of currently connected clients (Adhoc, AP, etc) - packet error rates or signal strength - Throughput statistics - FTM / direction finding operations Priority: Medium Complexity: C4 Network Configuration ===================== - Support elements of RFC4436 - DNAv4 Assumption: netconfig is able to save lease information for networks that have been joined previously and does not release the lease when the network is left temporarily. Attempt to re-assume the lease via methods described in DNAv4 if we attempt to rejoin a network and the lease has not expired yet. Priority: Low Complexity: C4