3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-04 19:09:24 +01:00
Commit Graph

316 Commits

Author SHA1 Message Date
James Prestwood
72bf3aa1f5 auto-t: remove iwd_config_dir from autotests
This is no longer needed unless setting a different
directory than /tmp
2020-03-21 00:10:36 -05:00
James Prestwood
9eb0f973f3 auto-t: fix testAddressRandomization
This test was dependent on having a local main.conf in /etc/iwd
2020-03-21 00:10:34 -05:00
James Prestwood
e7a9a43410 auto-t: add test for AddressRandomization option
Tests all cases of AddressRandomization=network

1. Deterministic generation per-network (default)
2. Full randomization per-network
3. Address override per-network
2020-03-18 18:15:16 -05:00
Tim Kourt
40ad8be113 auto-t: Test PEAPv0 cryptobinding 2020-02-03 11:34:29 -06:00
Torstein Husebø
759dbdd37f treewide: fix typos 2020-01-21 16:03:28 -06:00
James Prestwood
38fa76faf5 auto-t: use stand alone radius server for testFT-FILS-SHA384
This fixes the test with recent hostapd versions
2020-01-06 11:18:48 -06:00
James Prestwood
c01751c2b3 auto-t: use stand alone radius server for testFT-FILS-SHA256
This fixes the test with recent hostapd versions
2020-01-06 11:18:48 -06:00
James Prestwood
112f1f2bef auto-t: use stand alone radius server for testFILS
This fixes the test with recent hostapd versions
2020-01-06 11:18:48 -06:00
James Prestwood
40a79dc90b auto-t: add RRM test for scan duration
mac80211_hwsim does not actually support SET_SCAN_DWELL, but since we are
not setting duration mandatory the request should still be accepted.
2019-11-15 14:17:25 -06:00
James Prestwood
c961dafc50 auto-t: let testEAP-TTLS-MSCHAPv2 use HostapdCLI easier
This test made it past the initial refactor to use HostapdCLI with the
'config' parameter. This avoids the need to iterate the hostapd map in
the actual test.
2019-11-14 15:23:03 -06:00
James Prestwood
0c586dc8ca auto-t: give testEAP-TTLS-MSCHAPv2 a longer timeout
When logging is turned on this test consistently fails due to a
timeout. Giving it a bit more time allows it to pass.
2019-11-14 15:23:03 -06:00
James Prestwood
dcbdbac2f8 auto-t: fix intermittent failures in testEAP-MSCHAPV2
Occationally autoconnect would start which was not expected in the
test. This is fixed by disabling autoconnect in the provisioning files.
2019-11-14 12:58:18 -06:00
James Prestwood
a3817ba015 auto-t: add ctrl_interface to testHotspot
This is now required for any test using HostapdCLI
2019-11-13 16:37:17 -06:00
James Prestwood
088ed86f3d auto-t: add ctrl_interface to testHT-VHT
This is now required for any test using HostapdCLI
2019-11-13 16:37:17 -06:00
James Prestwood
5e98a1bbe5 auto-t: add ctrl_interface to testFILS
This is now required for any test using HostapdCLI
2019-11-13 16:37:17 -06:00
James Prestwood
7c2f73148c auto-t: add ctrl_interface to testOWE
This is now required for any test using HostapdCLI
2019-11-13 16:37:17 -06:00
James Prestwood
b45242562b auto-t: add RRM autotest
This test merely verifies hostapd receieved our measurement reports
and verified they were valid. Hostapd does not verify the actual
beacon report body. Really, the only way to test this is on an
actual network which makes these requests.
2019-11-07 12:26:19 -06:00
James Prestwood
87bd9f4c6e auto-t: support hostapd event processing
Hostapd has a feature where you can connect to its control socket and
receive events it generates. Currently we only send commands via this
socket.

First we open the socket (/var/run/hostapd/<iface>) and send the
ATTACH command. This tells hostapd we are ready and after this any
events will be sent over this socket.

A new API, wait_for_event, was added which takes an event string and
waits for some timeout. The glib event loop has been integrated into
this, though its not technically async since we are selecting over a
socket which blocks. To mitigate this a small timeout was chosen for
each select call and then wrapped in a while loop which waits for the
full timeout.
2019-11-04 14:42:17 -06:00
Denis Kenzior
22cba31c8b auto-t: update to the new AgentManager path 2019-10-28 18:08:54 -05:00
James Prestwood
4fcb6c3cc6 auto-t: update testEAP-TLS to use HostapdCLI
This test did not use the updated HostapdCLI where you can specify
a config file rather than iterate hostapd list.
2019-10-28 15:01:36 -05:00
James Prestwood
14df50a0ab auto-t: fix random failures in testEAP-MSCHAPV2
Its difficult to know 100%, but this random test failures appeared
to be caused by two issues. One was that get_ordered_network is being
checked for None, when it was returning a zero length array. Because
of this the scanning block was never executed in any cases. This was
fixed in the previous commit. The other issue was the disconnect at
the start of the tests. The disconnect will cause all pending scans
to cancel, which appeared to cause the scanning block below to be
skipped over quickly if the timing was right. Then, afterwards,
getting a single network failed because scanning was not complete.
2019-10-28 15:01:33 -05:00
James Prestwood
fc9342f751 auto-t: return None with get_ordered_network(s)
If no networks are found, return None rather than an empty
array. This is easier to check by the caller (and was assumed
in some cases). Also add an exception to get_ordered_network
if no network is found.
2019-10-28 14:59:58 -05:00
Denis Kenzior
d12ee292aa treewide: Use CamelCase for disable_anqp setting 2019-10-24 23:18:23 -05:00
Denis Kenzior
e540978633 treewide: Use CamelCase for [Scan] settings 2019-10-24 15:58:08 -05:00
Denis Kenzior
19a85a85e7 treewide: Rename EAP mtu key to MTU 2019-10-24 13:51:20 -05:00
Denis Kenzior
d66139fe34 treewide: Switch to CamelCase for Blacklist settings 2019-10-24 13:38:11 -05:00
Denis Kenzior
aa13f5458d auto-t: Rename setting Autoconnect to AutoConnect 2019-10-24 13:04:53 -05:00
Denis Kenzior
2521830d3e auto-t: Update to use InvalidArguments error 2019-10-24 10:54:45 -05:00
Denis Kenzior
584712dc6d auto-t: Update to the new wsc api naming 2019-10-24 10:49:13 -05:00
James Prestwood
cdc9eb13aa auto-t: hostapd: raise exception upon invalid config
If the config file passed in is not found we would continue and
eventually something else would fail. Instead immediately raise an
exception to be more clear on what is actually failing.
2019-10-22 21:58:30 -05:00
James Prestwood
8885135e63 auto-t: add TLS test with embedded PEMs 2019-10-07 23:09:29 -05:00
Tim Kourt
b3ccabea9e auto-t: Exercise '--dontask' iwctl command-line option 2019-09-19 12:36:12 -05:00
James Prestwood
e3fe7ab18e auto-t: test frequency removal and cleanup
This cleans up the test, but also adds some code to make sure the
frequency file is updated when a known network is forgotten
2019-09-16 13:49:08 -05:00
James Prestwood
c1890c6b06 auto-t: updated testScanKnownFreqs
This autotest was manually creating the .known_network.freq file so
the UUID needed to be manually generated and updated for the test
to function correctly.
2019-09-12 11:36:00 -05:00
James Prestwood
6503a1b482 auto-t: add frequency_test to testKnownNetworks
This tests that the known frequency file works as expected, both
for PSK and hotspot (and 8021x) networks.
2019-09-12 11:35:57 -05:00
Tim Kourt
bab9a4b6f2 auto-t: Remove no longer relevant test
The client prompts user for the missing secrets now, instead of
exiting with an error status code.
2019-09-11 11:48:24 -05:00
James Prestwood
50c947b53c auto-t: set CONFIGURATION_DIRECTORY
The --config option was removed, so any tests which start IWD from
python need to set this option if they need a special configuration
directory.
2019-09-09 15:40:09 -05:00
James Prestwood
c17b0ce04e auto-t: check for known networks in EAP-WSC
Make sure changes to WSC continue to work with known networks
2019-08-28 13:06:40 -05:00
James Prestwood
a0a81c72e1 auto-t: add autoconnect hotspot test 2019-08-28 11:28:53 -05:00
James Prestwood
0766138432 auto-t: update testHotspot with new Name requirements 2019-08-21 14:17:15 -05:00
James Prestwood
0f55b0023d auto-t: add hotspot to testKnownNetworks 2019-08-21 14:17:00 -05:00
James Prestwood
0846f76703 auto-t: add 'hotspot' network type 2019-08-21 14:16:08 -05:00
Tim Kourt
636bf5749f auto-t: Test client's non-interactive connect command 2019-08-15 15:06:59 -05:00
James Prestwood
5af5498aa9 auto-t: add shell test
This is merely an empty test that can act as a sandbox for the new
--shell command. It was not named with 'test' so that autotesting
will skip it.

This test is not very useful for virtual hardware testing
(mac80211_hwsim), but very useful for USB/PCI passthrough. When
setup correctly, you can now pass through a single device and test
against real networks with a minimal kernel.
2019-08-07 16:37:51 -05:00
James Prestwood
e2ec571f06 auto-t: remove dbus scan call in SAE autoconnect test
Doing this scan causes issues in the test. Like with other autoconnect
tests we can just use the fact that IWD will always be doing a periodic
scan during start up, so we only need to wait for that to finish before
querying the network list.
2019-08-02 02:23:45 -05:00
James Prestwood
43e9cce1dc auto-t: fix hotspot tests to remove main.conf
The hotspot tests were not cleaning up /tmp/main.conf, which resulted
in future tests failing.
2019-08-02 02:21:53 -05:00
Tim Kourt
9736bc211c auto-t: Test disconnect on connect while connected 2019-07-23 17:19:12 -05:00
James Prestwood
ce9e61d727 auto-t: hotspot dir not hidden 2019-07-15 11:14:01 -05:00
James Prestwood
c5eba1cc27 auto-t: add test for Hotspot with roaming consortium 2019-07-15 11:11:29 -05:00
James Prestwood
e5dedc3378 auto-t: add HESSID hotspot autotest
This tests the use of ONLY the HESSID configuration option. In
this test we also explicitly disable ANQP.
2019-07-03 13:02:28 -05:00