The plugin_exit was in the wrong place, it should be triggered in case
genl creation fails. Also adhoc_exit was in the wrong sequence compared
to _init()
Rather than have device.c manage the creation/removal of
AP/AdHoc interfaces this new event was introduced. Now
anyone can listen for device events and if the mode changes
handle accordingly. This fixes potential memory leaks
in WSC when switching modes as well.
These will issue a JOIN/LEAVE_IBSS to the kernel. There is
a TODO regarding network configuration. For now, only the
SSID is configurable. This configuration is also required
for AP, but needs to be thought out. Since the current
AP Dbus API has nothing related to configuration items
such as freq/channel or RSN elements they are hard coded,
and will be for Ad-Hoc as well (for now).
Now that the device mode can be changed, netdev must check that
the iftype is correct before starting a connection or disconnecting.
netdev_connect, netdev_connect_wsc, and netdev_disconnect now check
that the iftype is station before continuing.
With the introduction of Ad-Hoc, its not as simple as choosing
aa/spa addresses when setting the keys. Since Ad-Hoc acts as
both the authenticator and supplicant we must check how the netdev
address relates to the particular handshake object as well as
choose the correct key depending on the value of the AA/SPA address.
802.11 states that the higher of the two addresses is to be used
to set the key for the Ad-Hoc connection.
A simple helper was added to choose the correct addressed based on
netdev type and handshake state. netdev_set_tk also checks that
aa > spa in the handshake object when in Ad-Hoc mode. If this is
true then the keys from that handshake are used, otherwise return
and the other handshake key will be used (aa will be > spa).
The station/ap mode behaves exactly the same as before.
For Ad-Hoc networks, the kernel takes care of auth/assoc
and issues a NEW_STATION event when that is complete. This
provides a way to notify when NEW_STATION events occur as
well as forward the MAC of the station to Ad-Hoc.
The two new API's added:
- netdev_station_watch_add()
- netdev_station_watch_remove()
When the EAPOL-Key data field is encrypted using AES Wrap, check
that the data field is large enough before calculating the expected
plaintext length.
Previously, if the encrypted data field was smaller than 8 bytes, an
integer underflow would occur when calculating the expected plaintext
data length. This would cause iwd to try to allocate a huge amount of
memory, which causes it to abort and terminate. If the data field was
equal to 8 bytes, iwd would try to allocate 0 bytes of memory, making
l_new return NULL, which subsequently causes iwd to crash on a NULL
pointer deference.
Reported-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
triggered flag was being reset to false in all cases. However, due to
how scan_finished logic works, it should have remained true if no more
commands were left to be sent (e.g. the scan was finished).
Having hidden SSIDs or SSIDs with non-UTF8 characters around make iwd
flood the logs with messages. Make iwd less verbose and show these
messages with enabled debug output only.
In addition, the periodic scan can now alternate between the
active or passive modes. The active mode is enabled by existence of
the known hidden networks and observation of them in the
previous scan result.
To support an auto-connect for the hidden networks and having
a limited number of SSIDs that can be appended into a probe
request, introduced a concept of a command batch. Now, scan request
may consist of a series of commands. The commands in the batch
are triggered sequentially. Once we are notified about the
results from a previous command, a consequent command in the
batch is triggered. The collective results are reported once
the batch is complete. On a command failure, the batch
processing is canceled and scan request is removed
Rework the logic slightly to simplify the need for error labels. Also
the connect_pending variable might not have been properly reset to NULL
in case of error, so make sure we reset it prior to calling into
network_connect_new_hidden_network
1) Change signature of process_bss to return a confirmation
that bss has been added to a network otherwise we can
discard it.
2) Implements logic for the discovery and connection to
a hidden network.
This removes the need for duplicate code in AP/netdev for issuing
a DEL_STATION command. Now AP can issue a DEL_STATION with
netdev_del_station, and specify to either disassociate or deauth
depending on state.
If netdev fails to set the keys, there was no way for device/ap to
know. A new handshake event was added for this. The key setting
failure function was also fixed to support both AP/station iftypes.
It will now automatically send either a disconnect or del_station
depending on the interface type.
In similar manner, netdev_handshake_failed was also modified to
support both AP/station iftypes. Now, any handshake event listeners
should call netdev_handshake_failed upon a handshake failure
event, including AP.
If device is already disconnected or in autoconnect mode, don't return
an error if .Disconnect is called. Instead simply silently return
success after disabling autoconnect.
==1058== 231 (32 direct, 199 indirect) bytes in 1 blocks are definitely lost in loss record 10 of 10
==1058== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1058== by 0x452472: l_malloc (util.c:62)
==1058== by 0x456324: l_settings_new (settings.c:83)
==1058== by 0x427D45: storage_network_open (storage.c:262)
==1058== by 0x42806C: network_settings_load (network.c:75)
==1058== by 0x428C2F: network_autoconnect (network.c:490)
==1058== by 0x4104E9: device_autoconnect_next (device.c:194)
==1058== by 0x410E38: device_set_scan_results (device.c:393)
==1058== by 0x410EFA: new_scan_results (device.c:414)
==1058== by 0x424A6D: scan_finished (scan.c:1012)
==1058== by 0x424B88: get_scan_done (scan.c:1038)
==1058== by 0x45DC67: destroy_request (genl.c:134)
This is a fixup for the AP code merge. wsc.c never registered
for handshake events, so in case of failure it was never calling
netdev_handshake_failed, which caused a double free.
Many APs don't send properly zerod key_iv elements in EAPoL-Key frames.
In the past iwd has complained, but this broken behavior is so
prevalent, that it is likely a lost cause.
This patch takes out these warnings
Right now iwd uses Control Port over NL80211 feature if the kernel /
driver supports it. On some kernels this feature is still buggy, so add
an iwd.conf entry to allow the user to override id.
For now the default is to disable this feature until it is more stable.
Now, a user can setup an AP as follows:
- Set device "Mode" to ap (ap interface will appear on bus)
- call "Start()" on AP interface
Issuing "Stop()" on the AP interface will stop and cleanup
the internal AP structures, but the AP interface will remain
up. To shutdown completely the device Mode must be switched
back to station. If the AP interface is running, the Mode can
directly be switched to station without calling Stop; this
has the same effect and will take down the AP interface.
Some of the PEAP server implementation brake the protocol
and don’t set the M flag for the first packet during the
fragmented transmission. To stay compatible with such
devices, we relax this requirement in iwd.
This patch allows alternating between the passive and active
scans taking into consideration an existence of the known
hidden networks and previous observation of them in the scan
results, as well as an ability to randomize the MAC address.
The state of scan is split between the two variables sc->state
and sc->start_cmd_id. Not checking start_cmd_id used to cause
sending a scan request while periodic scan was just triggered
resulting in EBUSY.
Instead of manually sending a deauth/disassociate to a station
during an error or removal, the kernel can do it automatically
with DEL_STATION by including the MGMT_SUBTYPE attribute. This
removes the need for ap_error_deauth_sta and introduces
ap_deauthenticate_sta. Now AP can be explicit when it chooses
to deauth or disassociate.
All handshake packet handling has been removed from ap and
moved to eapol. After association, the AP registers a new
authenticator state machine which handles the AP side of
the handshake. AP will receive a handshake event once the
4-way handshake is complete.
Includes:
- support for handling ptk 2/4 and 4/4. Also sending 1/4 and 3/4.
- new API to register an authenticator SM. This automatically
sends 1/4 to kick off authentication with an sta.
These checks allow both a station and authenticator to use
the same netdev key install functions. For NEW_KEY and
SET_STATION, the iftype is checked and either handshake->aa
or ->spa is used as the station address for the KEY/STATION
commands. Also, in the failure cases, a disconnect command
is issued only if the iftype is station as this doesn't
apply to AP.
Handshake related netdev events were removed in favor of
handshake events. Now events will be emitted on the handshake
object related to the 4-way handshake and key settings. Events
are:
HANDSHAKE_EVENT_STARTED
HANDSHAKE_EVENT_SETTING_KEYS
HANDSHAKE_EVENT_COMPLETE
HANDSHAKE_EVENT_FAILED
Right now, since netdev only operates in station mode, nothing
listens for COMPLETE/FAILED, as device/wsc gets notified by the
connect_cb when the connection was successful. The COMPLETE/
FAILED were added in preperation for AP moving into eapol/netdev.
==1057== 32 bytes in 1 blocks are definitely lost in loss record 1 of 1
==1057== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==1057== by 0x15E9A2: l_malloc (util.c:62)
==1057== by 0x15EA9D: l_memdup (util.c:121)
==1057== by 0x133D9A: network_set_psk (network.c:350)
==1057== by 0x13BD29: wsc_try_credentials (wsc.c:136)
==1057== by 0x13C121: wsc_connect_cb (wsc.c:220)
==1057== by 0x110FAF: netdev_connect_failed (netdev.c:525)
==1057== by 0x16AAF4: process_unicast (genl.c:390)
==1057== by 0x16AF03: received_data (genl.c:509)
==1057== by 0x166CB6: io_callback (io.c:123)
==1057== by 0x16580D: l_main_iterate (main.c:376)
==1057== by 0x16594B: l_main_run (main.c:423)
load_settings ensures that ttls->eap is correctly initialized. So this
code should be treated as an error condition.
We also do not support EAP chaining, so remove that logic as well
dbus_init() currently does not check for the g_dbus object being
properly initialized and this leads to crashes when dbus is not yet
running.
Ensure g_dbus is properly initialized and return false otherwise.
In this case the caller can understand that something went wrong and
stop the initialization procedure.
Program received signal SIGSEGV, Segmentation fault.
0x00005555555bc089 in l_dbus_add_service_watch (dbus=0x0,
name=0x5555555e5b0a "org.ofono",
connect_func=0x5555555aa81e <ofono_found>,
disconnect_func=0x5555555aa8e6 <ofono_disappeared>,
user_data=0x0, destroy=0x0) at ell/dbus.c:1621
1621 if (!dbus->name_cache)
(gdb) bt
name=0x5555555e5b0a "org.ofono",
connect_func=0x5555555aa81e <ofono_found>,
disconnect_func=0x5555555aa8e6 <ofono_disappeared>,
user_data=0x0, destroy=0x0) at ell/dbus.c:1621
user_data=0x0) at ell/plugin.c:115
function=0x5555555b40fd <plugin_start>,
user_data=0x0) at ell/queue.c:441
version=0x0) at ell/plugin.c:201
src/plugin.c:82
src/main.c:417
When the response structure is generated, not all of the memory was
initialized to 0.
==1045== Syscall param socketcall.sendto(msg) points to uninitialised byte(s)
==1045== at 0x5134D52: send (in /lib64/libc-2.25.so)
==1045== by 0x168AB5: l_checksum_update (checksum.c:338)
==1045== by 0x186777: tls_write_mac (tls-record.c:58)
==1045== by 0x1869D1: tls_tx_record_plaintext (tls-record.c:120)
==1045== by 0x186DEA: tls_tx_record (tls-record.c:201)
==1045== by 0x185A3B: l_tls_write (tls.c:2064)
==1045== by 0x14584F: eap_ttls_eap_tx_packet (eap-ttls.c:321)
==1045== by 0x14236C: eap_send_response (eap.c:165)
==1045== by 0x147904: eap_mschapv2_send_response (eap-mschapv2.c:468)
==1045== by 0x147A10: eap_mschapv2_handle_challenge (eap-mschapv2.c:492)
==1045== by 0x147E9A: eap_mschapv2_handle_request (eap-mschapv2.c:615)
==1045== by 0x142693: __eap_handle_request (eap.c:240)
==1045== Address 0x1ffeffe7f9 is on thread 1's stack
==1045== in frame #4, created by tls_tx_record (tls-record.c:177)
==1045== Uninitialised value was created by a stack allocation
==1045== at 0x1477AE: eap_mschapv2_send_response (eap-mschapv2.c:443)
==1045==
==1045== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==1045== at 0x5134E3B: sendmsg (in /lib64/libc-2.25.so)
==1045== by 0x17F691: operate_cipher (cipher.c:356)
==1045== by 0x17F9D8: l_cipher_encrypt (cipher.c:446)
==1045== by 0x186BAA: tls_tx_record_plaintext (tls-record.c:152)
==1045== by 0x186DEA: tls_tx_record (tls-record.c:201)
==1045== by 0x185A3B: l_tls_write (tls.c:2064)
==1045== by 0x14584F: eap_ttls_eap_tx_packet (eap-ttls.c:321)
==1045== by 0x14236C: eap_send_response (eap.c:165)
==1045== by 0x147904: eap_mschapv2_send_response (eap-mschapv2.c:468)
==1045== by 0x147A10: eap_mschapv2_handle_challenge (eap-mschapv2.c:492)
==1045== by 0x147E9A: eap_mschapv2_handle_request (eap-mschapv2.c:615)
==1045== by 0x142693: __eap_handle_request (eap.c:240)
==1045== Address 0x1ffeffe7f9 is on thread 1's stack
==1045== in frame #4, created by tls_tx_record (tls-record.c:177)
==1045== Uninitialised value was created by a stack allocation
==1045== at 0x1477AE: eap_mschapv2_send_response (eap-mschapv2.c:443)
==1045==
Since PEAP & TTLS expect to use eap_check_settings recursively, make
them use a private version of that API that does not perform cleanup and
can contain side-effects.
eap_check_settings itself will guarantee that no side effects happen on
error. It is meant to be used by code outside of the eap subsystem.
Missing secrets are freed by eap_send_agent_req() even in case of
failure, so it was erroneous to try to free them on error.
==1048== Invalid read of size 8
==1048== at 0x1603EC: l_queue_clear (queue.c:101)
==1048== by 0x1603B8: l_queue_destroy (queue.c:82)
==1048== by 0x135328: network_connect_8021x (network.c:943)
==1048== by 0x1354C4: network_connect (network.c:987)
==1048== by 0x178DD2: _dbus_object_tree_dispatch (dbus-service.c:1690)
==1048== by 0x16D32A: message_read_handler (dbus.c:285)
==1048== by 0x166EC3: io_callback (io.c:123)
==1048== by 0x165A1A: l_main_iterate (main.c:376)
==1048== by 0x165B58: l_main_run (main.c:423)
==1048== by 0x1102DA: main (main.c:458)
==1048== Address 0x5461850 is 0 bytes inside a block of size 24 free'd
==1048== at 0x4C2C13B: free (vg_replace_malloc.c:530)
==1048== by 0x15ED03: l_free (util.c:136)
==1048== by 0x1603C4: l_queue_destroy (queue.c:83)
==1048== by 0x134BD5: eap_secret_request_free (network.c:719)
==1048== by 0x134EF9: eap_send_agent_req (network.c:817)
==1048== by 0x1352F7: network_connect_8021x (network.c:936)
==1048== by 0x1354C4: network_connect (network.c:987)
==1048== by 0x178DD2: _dbus_object_tree_dispatch (dbus-service.c:1690)
==1048== by 0x16D32A: message_read_handler (dbus.c:285)
==1048== by 0x166EC3: io_callback (io.c:123)
==1048== by 0x165A1A: l_main_iterate (main.c:376)
==1048== by 0x165B58: l_main_run (main.c:423)
In eap_check_settings move the check for the EAP-Identity setting so
that the method's check_setting call back has a chance to request it
from the agent. Note the check can be also moved to the EAP methods
so that they are free to skip it if not NULL identity is ok.
Replace usages of l_settings_get_value with l_settings_get_string, which
will make sure the returned strings are unescaped but also allocates
memeory and forces us to use l_free on most of the strings. Some of
these strings we explicitly set with l_settings_set_string() in our code
so when we retrieved them with l_settings_get_value() we would receive a
different string if there were any escapable characters in the string.
I didn't replace any of the l_settings_get_value() uses where we're just
checking whether a setting is present, or those which are hexstrings or
EAP method names assuming that they can't have any special characters,
although this isn't future proof. I did use l_settings_get_string() for
file paths though.
Accept two setting IDs in eap_append_secret, first for the username and
second for the password in case of the EAP_SECRET_REMOTE_USER_PASSWORD
EAP secret type. In all other cases only the first setting is used.
Until now for EAP_SECRET_REMOTE_USER_PASSWORD secrets we'd generate the
two setting names by adding different suffixes to the ID parameter.
Using the two different setting names automatically fixes the issues
with using the EAP Identity returned by the agent in EAP-MSCHAPv2 and
EAP-PWD.
The WDS dbus property of a Device directly maps to the 4ADDR property
of a real netdevice. It can be activated or deactivated at any point
in time.
The name WDS comes from the fact that this feature allows a STA
interface to be bridged and thus create a Wireless Distribution
System (the same name is used in OpenWRT and hostapd).
To implement this feature, the 'powered callback' data structure has
been renamed and re-used.
When a wifi interface is added/removed to/from a bridge, a
RTM_NEW/DELLINK event is issued. This is the same event used to signal
when an interface is created/deleted.
For this reason the event generated by the bridge code has to be
properly distinguished and handled accordingly. Failing to do so will
result in inconsistencies in iwd which will think an interface has been
deleted when it was actually not.
Detect incoming NEW/DELLINK bridge events and reacts accordingly. For
now, this simply means printing a simple message, as there is no
special logic in iwd for this yet.
This is meant to reset the EAP state back to its original state without
affecting any state variables obtained through load_settings. This can
be useful for EAP Reauthentication triggered by the AP.
Instead use '-d' command line option. This option uses an optional
argument. Without an argument, '*' is assumed. Otherwise you can
specify a glob string to match. Any debug output that matches the glob
string will be printed. e.g.:
src/iwd -d '*eap*'
Some EAP servers might try to send us packets after the EAP connection
has been established. When EAP succeeds we destroy the EAP object. If
a new EAP request arrives we create a temporary EAP object to handle the
request (most likely to NAK it). However, if the packet is not destined
to a particular method (e.g. it is a notification) the current logic can
result in a crash.
src/netdev.c:netdev_set_gtk() 3
==4300== Invalid read of size 8
==4300== at 0x14204B: __eap_handle_request (eap.c:203)
==4300== by 0x142339: eap_rx_packet (eap.c:287)
==4300== by 0x12AEF9: eapol_rx_packet (eapol.c:1622)
==4300== by 0x12BBBC: __eapol_rx_packet (eapol.c:2018)
==4300== by 0x116D1E: netdev_pae_read (netdev.c:3121)
==4300== by 0x16672B: io_callback (io.c:123)
==4300== by 0x165239: l_main_iterate (main.c:376)
==4300== by 0x16537D: l_main_run (main.c:423)
==4300== by 0x10F95C: main (main.c:447)
==4300== Address 0x30 is not stack'd, malloc'd or (recently) free'd
==4300==
When the server sends an identity prompt or a notification, we were
trying to print from our local buffer, not from the actual packet. The
relevant valgrind trace is:
src/netdev.c:netdev_mlme_notify() MLME notification 64
==4300== Conditional jump or move depends on uninitialised value(s)
==4300== at 0x4C3006E: strnlen (vg_replace_strmem.c:425)
==4300== by 0x508C513: vfprintf (vfprintf.c:1643)
==4300== by 0x508EB75: buffered_vfprintf (vfprintf.c:2329)
==4300== by 0x508C1A1: vfprintf (vfprintf.c:1301)
==4300== by 0x167051: log_stderr (log.c:145)
==4300== by 0x16756E: l_log_with_location (log.c:293)
==4300== by 0x142173: __eap_handle_request (eap.c:235)
==4300== by 0x142339: eap_rx_packet (eap.c:287)
==4300== by 0x12AEF9: eapol_rx_packet (eapol.c:1622)
==4300== by 0x12BBBC: __eapol_rx_packet (eapol.c:2018)
==4300== by 0x116D1E: netdev_pae_read (netdev.c:3121)
==4300== by 0x16672B: io_callback (io.c:123)
==4300==
EAP identity prompt: ""
GLIBC is not necessarily the only library that provides execinfo.
With libexecinfo execinfo can be used also in other Libraries.
The patch lets the configure check the existence of the header
and the libexecinfo Library and uses them if avaible.
(also fixes compilation if execinfo is not avaible)
iwd was auto-connecting to the open networks despite having
Autoconnect=false flag set in the network configuration file.
This patch enables iwd to load the configuration files for the
open networks during the auto-connect attempt to take advantage
of the Autoconnect flag.
EAP-PWD was hard coded to only work on LE architectures. This
adds 2 conversion functions to go from network byte order (BE)
to any native architecture, and vise versa.
The file, src/ecc.c was taken from the bluez project:
https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/src/shared/ecc.c
There were minor changes made, e.g. changing some functions to globals
for access in EAP-PWD as well as removing some unneeded code. There was
also some code appended which allows for point addition, modulus inverse
as well as a function to compute a Y value given an X.
If Control Port over NL80211 is not supported, open up a PAE socket and
stuff it into an l_io on the netdev object. Install a read handler on
the l_io and call __eapol_rx_packet as needed.
With the introduction of Control Port Over NL80211 feature, the
transport details need to be moved out of eapol and into netdev.c.
Whether a given WiFi hardware supports transfer of Control Port packets
over NL80211 is Wiphy and kernel version related, so the transport
decisions need to be made elsewhere.
On connect add any secrets we've received through the agent to the
l_settings objects which the EAP methods will process in load_settings.
The settings object is modified but is never written to storage. If
this was to change because some settings need to be saved to storage,
a new l_settings object might be needed with the union of the settings
from the file and the secrets so as to avoid saving the sensitive data.
These EAP methods do not store the identity inside the settings file
since it is obtained from the SIM card, then provided to IWD via
get_identity method. If the get_identity method is implemented, do
not fail the settings check when EAP-Identity is missing.
Use eap_check_settings directly from network.c before we start the
connection attempt at netdev.c level, to obtain all of the required
passwords/passphrases through the agent. This is in network.c because
here we can decide the policies for whether to call the agent in
autoconnect or only if we had a request from the user, also whether we
want to save any of that for later re-use (either password data or
kernel-side key serial), etc.
In this patch we save the credentials for the lifetime of the network
object in memory, and we skip the network if it requires any passphrases
we don't have while in autoconnect, same as with PSK networks where the
PSK isn't given in the settings. Note that NetworkManager does pop up
the password window for PSK or EAP passwords even in autoconnect.
If EAP needs multiple passwords we will call the agent sequentially for
each.
Confirm that the PEM file paths that we'll be passing to the l_tls
object are loading Ok and request/validate the private key passphrase
if needed. Then also call eap_check_settings to validate the inner
method's settings.
Confirm that the PEM file paths that we'll be passing to the l_tls
object are loading Ok and request/validate the private key passphrase
if needed. Then also call eap_check_settings to validate the inner
method's settings.
With the goal of requesting the required passwords/passphrases, such as
the TLS private key passphrase, from the agent, add a static method
eap_check_settings to validate the settings and calculate what passwords
are needed for those settings, if any. This is separate from
eap_load_settings because that can only be called later, once we've
got an eap state machine object. We need to get all the needed EAP
credentials from the user before we even start connecting.
While we do this, we also validate the settings and output any error
messages through l_error (this could be changed so the messages go
somewhere else in the future), so I removed the error messages from
eap_load_settings and that method now assumes that eap_check_settings
has been called before.
eap_check_settings calls the appropriate method's .check_settings method
if the settings are complete enough to contain the method name. The
policy is that any data can be provided inside the l_settings object
(from the network provisioning/config file), but some of the more
sensitive fields, like private key passwords, can be optionally omitted
and then the UI will ask for them and iwd will be careful with
caching them.
Within struct eap_secret_info, "id" is mainly for the EAP method to
locate the info in the list. "value" is the actual value returned
by agent. "parameter" is an optional string to be passed to the agent.
For a private key passphrase it may be the path to the key file, for a
password it may be the username for which the password is requested.
In agent_receive_reply we first call the callback for the pending
request (agent_finalize_pending) then try to send the next request
in the queue. Check that the next request has not been sent already
which could happen if it has been just queued by the callback.
The difference in the handlers was that in the
NETDEV_EVENT_DISCONNECT_BY_AP case we would make sure to reply
to a pending dbus Connect call. We also need to do that for
NETDEV_EVENT_DISCONNECT_BY_SME. This happens if another process
sends an nl80211 disconnect command while we're connecting.
The eapol handshake timeout can now be configured in main.conf
(/etc/iwd/main.conf) using the key eapol_handshake_timeout. This
allows the user to configure a long timeout if debugging.
After an EAP exchange rsn_info would be uninitialized and in the FT case
we'd use it to generate the step 2 IEs which would cause an RSNE
mismatch during FT handshake.
Until now we'd save the second 32 bytes of the MSK as the PMK and use
that for the PMK-R0 as well as the PMKID calculation. The PMKID
actually uses the first 32 bytes of the PMK while the PMK-R0's XXKey
input maps to the second 32 bytes. Add a pmk_len parameter to
handshake_state_set_pmk to handle that. Update the eapol_eap_results_cb
802.11 quotes to the 2016 version.
handshake_state_install_ptk triggers a call to
netdev_set_pairwise_key_cb which calls netdev_connect_ok, so don't call
netdev_connect_ok after handshake_state_install_ptk. This doesn't fix
any specific problem though.
If the request being cancelled by agent_request_cancel has already been
sent over dbus we need to reset pending_id, the timeout, call l_dbus_cancel
to avoid the agent_receive_reply callback (and crash) and perhaps start
the next request. Alternatively we could only reset the callback and not
free the request, then wait until the agent method to return before starting
the next request.
Move the cancelling of the eapol timeout from the end of step 1 to
step 3 to guard the whole handshake. At the end of step 1 stop the
EAPOL-Start timeout for the case of 802.1X authentication + a cached
PMKSA (not used yet.)
Some APs respond to Neighbor Report Requests with neighbor reports that
have a zero operating class value and a non-zero channel number. This
does not mean that the channel is in the same band that the reporting
AP operates in. Try to guess the band that the channel refers to out of
2.4 and 5GHz -- the bands supported by those APs.
wpa_supplicant also has this workaround in place.
SA Query procedure is used when an unprotected disassociate frame
is received (with frame protection enabled). There are two code
paths that can occur when this disassociate frame is received:
1. Send out SA Query and receive a response from the AP within a
timeout. This means that the disassociate frame was not sent
from the AP and can be ignored.
2. Send out SA Query and receive no response. In this case it is
assumed that the AP went down ungracefully and is now back up.
Since frame protection is enabled, you must re-associate with
the AP.
1. Enforce implementation of handle_request function
2. In case of unimplemented handle_retransmit try to use
handle_request instead and rely on method specific
mechanism to restart the conversation if necessary
3. Make method->free implementation unrequired
When we call scan_periodic_stop and a periodic scan is in progress (i.e.
the trigger callback has been called already) we get no new callback
from scan.c and the device Scanning property remains True forever so set
it to False.
The change from scan_periodic_stop to periodic_scan_stop looks silly but
it's consistent with our naming :)
This patch adds a watcher/parser for the frame event associated with
an AP directed BSS transition (AP roaming). When the AP sends a BSS
transition request, this will parse out the BSS candidate list
(neighbor report) and initiate a roam scan. After this point the
existing roaming code path is reused.
The identity retrieved from simauth was required to include the
prefix for SIM/AKA/AKA', but in reality a real SIM would not
include that prefix in the IMSI. Now the correct prefix is
prepended onto the identity depending on the EAP method.
If the SQN in AUTN is incorrect the simauth module will return
the AUTS parameter, which is sent back to the server and the
servers SQN number is updated.
Forcing a plugin to create and register simauth at once is sometimes
inconvenient. This patch separates the creation and registration
into two API's, and also adds several others to add the required simauth
data incrementally (identity, driver data, sim/aka support). This also
allows for the driver to unregister the auth provider without freeing
up the simauth object itself e.g. if the driver temporarily becomes
unavailable, but will come back sometime in the future.
The simauth watch API's were also renamed. Watchers will now get a
callback when the provider has been unregistered, so they have been
renamed to sim_auth_unregistered_watch_[add|remove].
src/simauth.c:163:6: error: no previous declaration for ‘sim_auth_cancel_request’ [-Werror=missing-declarations]
void sim_auth_cancel_request(struct iwd_sim_auth *auth, int id)
^~~~~~~~~~~~~~~~~~~~~~~
iwd now supports plugin loading, whitelisting and blacklisting. Both
the whitelist and the blacklist support multiple patterns separated by a
',' character.
Make sure device->autoconnect is set when entering the autoconnect state
after netdev UP event. Otherwise the next time
device_set_autoconnect(device, false) is called it will exit early seeing
that device->autoconnect is false and not switch the device state.
This is the core module that takes care of registering
authentication drivers. EAP-SIM/AKA will be able to acquire
a driver that supports the required algorithms. The driver
implementation (hardcoded/ofono etc.) is isolated into
separate plugin modules.
EAP-SIM/AKA/AKA' retrieve the EAP-Identity off the SIM card
not from the settings file. This adds a new EAP method API
which can optionally be implemented to retrieve the identity.
If get_identity is implemented, the EAP layer will use it to
retrieve the identity rather than looking in the settings file.
network_settings_load expects NULL value to be returned
on failed attempts to read the settings files inside of
storage_network_open. At the same time storage_network_open
used to always return an initialized l_settings
structure despite the outcome of the read operations,
indicating a success.
When the 4-Way Handshake is done eapol.c calls netdev_set_tk, then
optionally netdev_set_gtk and netdev_set_igtk. To support the no group
key option send the final SET STATION enabling the controlled port
inside the callback for the netdev_set_tk operation which always means
the end of a 4-Way Handshake rather than in the netdev_set_gtk callback.
The spec says exactly that the controlled port is enabled at the end of
the 4-Way Handshake.
The netlink operations will still be queued in the same order because
the netdev_set_tk/netdev_set_gtk/netdev_set_igtk calls happen in one
main loop iteration but even if the order changed it wouldn't matter.
On failure of any of the three operations netdev_setting_keys_failed
gets called and the remaining operations are cancelled.
Track the contents and size of the GTK and IGTK and if the Authenticator
(or an adversary) tries to set the same GTK/IGTK, process the packet
normally but do not resubmit the GTK/IGTK to the kernel.
GTK KDE was being checked for being a minimum of 6 bytes. Not quite
sure why since the minimum GTK key length is 16 bytes for CCMP.
Similarly make sure that the maximum length is not more than 32, which
is currently the largest key size (TKIP)
This is a bizarre case since MIC calculation succeeded for the incoming
packet. But just in case MIC calculation fails for the outgoing packet,
kill the handshake.
The comments quoted sections of the specification that indicated STA
behavior for verifying Message 3 of 4 or GTK 1 of 2. But in reality the
code directly below simply calculated the MIC for Message 4 of 4 or GTK
2 of 2.
Use eapol_frame_watch_add/eapol_frame_watch_remove in eapol_sm, while
there simplify the early_frame logic and confirm sender address for
received frames.
Set all the new field values into struct sta_state only after all the
error checks for better readabilty and fixing a possible issue if we
did "sta->rates = rates" and then detected en error and freed "rates".
Also update a comment which I think used the wording from 802.11-2012
instead of 802.11-2016.
DEL_KEY is not needed and will return errors right after NEW_STATION or
right after DEL_STATION. In both cases the kernel makes sure there are
no old keys for the station already.
As a temporary DBus API to switch between Station and Access Point
modes, add two methods on the Device interface. Add a new state
DEVICE_STATE_ACCESS_POINT which is in effect from the moment
StartAccessPoint is received (even before it returns) until
StopAccessPoint returns, there are no intermediate states when the
methods run for simplicity. Add checks across device.c to make sure
Station related functionality is disabled when in Access Point mode.
Add a utility to append a KDE to the key_data field in an EAPoL frame.
The KDE types enum is actually added to handshake.h because we've got
the utilities for finding those KDEs in a buffer there. The new
function is specific to EAPoL-Key frames though and perhaps to simple to
be split across handshake.c and eapol.c. Also it didn't seem useful to
use the ie_tlv_builder here.
Parse Association Request frames and send Association Responses, handle
Disassociation. With this we should be able to receive uncontrolled
port data frames since we register the STAs with the kernel.
In this version I don't register for Reassociation frames.
Validate the IE order for some of the cases. For other cases, as with
the Disassociation, Deauthentication and Action frame types in section
9.3 it's not even clear from the spec the fields are expected to be IEs
(in fact for Action frame we know they aren't). For the Shared Key
authentication type drop the union with the contents as they can be
easier parsed as an IE sequence. For SAE we are not expecting an IE
sequence apparently so this is where the union could come useful but
let's leave that until we want to support SAE.
Check the IE order for each frame type where we'd just do the body
minimum length check until now (and not always correctly). We do not
try to validate the contents of any IEs (may be doable for some) or the
minimum mandatory IEs presence. This is because which IEs are required
depend on the contents of other fields in the frame, on the
authentication state and STA config and even contents of a request frame
which we're validating the response to. Frame handlers have to do this
work anyway.
Declare the two missing frame subtype enum values for Action frames,
assume Action frames are valid. Once we have specific validation code
for any Action frames elsewhere, we can move it to mpdu_validate, but
right don't try to validate the frame body as there are many subtypes
and we don't use any of them except Neighbor Reports which are actually
really simple.
Since we use the special 0xffff value in the builder code, check that
the tag is not 0xffff in ie_tlv_builder_finalize before writing the
header. This is for consistency, not for a specific use case.
Make parsing TLVs using Extended Element IDs easier by returning the
extended tag value as listed in enum ie_type instead of just the 255
value, and not returning the pointer to the extended tag as the IE data
and instead the pointer to the next byte after the extended ID.
The l_queue_find() to find other watches matching the new prefix
needs to be before the watchlist_link(), otherwise the prefix will
match itself and "registered" is always true.
In WATCHLIST_NOTIFY_MATCHES pass pointer to the item instead of
item->notify_data to free item->notify_data to be the final watch user's
user_data. This is also what netdev expects.
The EAP-method's .probe methods only checked the method name so do that
in eap.c instead and allocate method state in .load_settings. Rename
method's .remove method to .free to improve the naming.
This can be used to selectively notify watchlist items. The match
function is called for each watchlist_item and match_data is passed
along. If the match function returns true, then the watch_item is
notified. The match function signature and semantics are identical
to l_queue_match_func_t.
Rename netdev_register_frame to netdev_frame_watch_add and expose to be
usable outside of netdev.c, add netdev_frame_watch_remove also. Update
the Neighbor Report handling which was the only user of
netdev_register_frame.
The handler is now simpler because we use a lookup list with all the
prefixes and individual frame handlers only see the frames matching the
right prefix. This is also useful for the future Access-Point mode.
src/mpdu.c: In function ‘mpdu_validate’:
src/mpdu.c:180:9: error: ‘mmpdu’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
mmpdu = (const struct mmpdu_header *) mmpdu;
^
Refactor management frame structures to take into account optional
presence of some parts of the header:
* drop the single structure for management header and body since
the body offset is variable.
* add mmpdu_get_body to locate the start of frame body.
* drop the union of different management frame type bodies.
* prefix names specific to management frames with "mmpdu" instead
of "mpdu" including any enums based on 802.11-2012 section 8.4.
* move the FC field to the mmpdu_header structure.
This EAP method uses nearly all the logic from EAP-AKA. The major
difference is it uses the new key derivation functions for AKA' as
well as the SHA256 MAC calculation.
EAP-AKA' uses SHA256 rather than SHA1 to generate the packet MAC's.
This updates the derive MAC API to take the EAP method type and
correctly use the right SHA variant to derive the MAC.
This is the core key generation code for the AKA' method which
follows RFC 5448. Two new functions are implemented, one for
deriving CK'/IK' and the other for deriving the encryption keys
using CK'/IK'.
If the kernel device driver or the kernel nl80211 version doesn't
support the new RSSI threshold list CQM monitoring, implement similar
logic in iwd with periodic polling. This is only active when an RSSI
agent is registered to receive the events. I tested this with the same
testRSSIAgent autotests that tests the driver-side rssi monitoring
except with all timeouts multiplied by ~20.
The AT_VERSION_LIST attribute length was not being properly
checked. The actual length check did not include possible padding
bytes, so align_len() was added to ensure it was padded properly.
The comment about the padding being included in the Master Key
generation was not correct (padding is NOT included), and was removed.
Function to allow netdev.c to explicitly tell eapol.c whether to expect
EAP / 4-Way handshake. This is to potentially make the code more
descriptive, until now we'd look at sm->handshake->ptk_complete to see
if a new PTK was needed.
A 4-Way handshake is required on association to an AP except after FT.
Modify netdev_get_iftype, which was until now unused, and add
netdev_set_iftype. Don't skip interfaces with types other than STATION
on startup, instead reset the type to STATION in device.c.
netdev_get_iftype is modified to use our own interface type enum to
avoid forcing users to include "nl80211.h".
Note that setting an interface UP and DOWN wouldn't generally reset the
iftype to STATION. Another process may still change the type while iwd
is running and iwd would not detect this as it would detect another
interface setting interface DOWN, not sure how far we want to go in
monitoring all of the properties this way.
If we're adding the BSS to the list only because it is the current BSS,
set the rank to 0 (lowest possible value) in case the list gets used in
the next Connect call.
Allow attempts to connect to a new AP using the Reassociation frame even
if netdev->operational is false. This is needed if we want to continue
an ongoing roam attempt after the original connection broke and will be
needed when we start using cached PMKSAs in the future.
Use beacon loss event to trigger a roam attempt in addition to the RSSI
monitoring. Due to the how well beacons are normally received compared
to data packets, a beacon loss indicates a serious problem with the
connection so act as soon as a first beacon loss event is seen.
Avoid roaming methods that involve the current AP: preauthentication,
neighbor report request and FT-over-the-DS (not supported)
There are situations including after beacon loss and during FT where the
cfg80211 will detect we're now disconnected (in some cases will send a
Deauthenticate frame too) and generate this event, or the driver may do
this. For example in ieee80211_report_disconnect in net/mac80211/mlme.c
will (through cfg80211) generate a CMD_DEAUTHENTICATE followed by a
CMD_DISCONNECT.
The kernel doesn't reset the netdev's state to disconnected when it
sends us a beacon loss event so we can't either unless we automatically
send a disconnect command to the kernel.
It seems the handling of beacon loss depends on the driver. For example
in mac80211 only after N beacon loss events (default 7) a probe request is
sent to the AP and a deauthenticate packet is sent if no probe reply is
receiver within T (default 500ms).
If an application initiates the Connect() operation and
that application has an agent registered, then that
application's agent will be called. Otherwise, the default
agent is called.
==40686== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==40686== at 0x5147037: sendmsg (in /usr/lib64/libc-2.24.so)
==40686== by 0x43957C: operate_cipher (cipher.c:354)
==40686== by 0x439C18: l_cipher_decrypt (cipher.c:415)
==40686== by 0x40FAB8: arc4_skip (crypto.c:181)
Initialize the skip buffer to 0s. This isn't strictly necessary, but
hides the above valgrind warning.
The aim of arc4 skip is simply to seed some data into the RC4 cipher so
it makes it harder for the attacker to decrypt. This 'initialization'
doesn't really care what data is fed.
CMD_DEAUTHENTICATE is not available for FullMAC based cards. We already
use CMD_CONNECT in the non-FT cases, which works on all cards. However,
for some reason we kept using CMD_DEAUTHENTICATE instead of CMD_DISCONNECT.
For FT (error) cases, keep using CMD_DEAUTHENTICATE.
Certain WiFi drivers do not support using CMD_SET_STATION (e.g.
mwifiex). It is not completely clear how such drivers handle the
AUTHORIZED state, but they don't seem to take it into account. So for
such drivers, ignore the -ENOTSUPP error return from CMD_SET_STATION.
These flags are documented in RFC2863 and kernel's
Documentation/networking/operstates.txt. Operstate doesn't have any
siginificant effect on normal connectivity or on our autotests because
it is not used by the kernel except in some rare cases but it is
supposed to affect some userspace daemons that watch for RTM_NEWLINK
events, so I believe we *should* set them according to this
documentation. Changes:
* There's no point setting link_mode or operstate of the netdev when
we're bringing the admin state DOWN as that overrides operstate.
* Instead of numerical values for link_mode use the if.h defines.
* Set IF_OPER_UP when association succeeds also in the Fast Transition
case. The driver will have set carrier off and then on so the
operstate should be IF_OPER_DORMANT at this point and needs to be
reset to UP.
Allow registering and unregistering agent object to receive RSSI level
notifications. The methods are similar to the ones related to the
password agent, including a Release method for the agent.
Add an methods and an event using the new
NL80211_EXT_FEATURE_CQM_RSSI_LIST kernel feature to request RSSI
monitoring with notifications only when RSSI moves from one of the N
intervals requested to another.
device.c will call netdev_set_rssi_report_levels to request
NETDEV_EVENT_RSSI_LEVEL_NOTIFY events every time the RSSI level changes,
level meaning one of the intervals delimited by the threshold values
passed as argument. Inside the event handler it can call
netdev_get_rssi_level to read the new level.
There's no fallback to periodic polling implemented in this patch for
the case of older kernels and/or the driver not supporting
NL80211_EXT_FEATURE_CQM_RSSI_LIST.
==27901== Conditional jump or move depends on uninitialised value(s)
==27901== at 0x41157A: handshake_util_find_pmkid_kde
(handshake.c:537)
==27901== by 0x40E03A: eapol_handle_ptk_1_of_4 (eapol.c:852)
==27901== by 0x40F3CD: eapol_key_handle (eapol.c:1417)
==27901== by 0x40F955: eapol_rx_packet (eapol.c:1607)
==27901== by 0x410321: __eapol_rx_packet (eapol.c:1915)
Agent implementation inside agent.c takes a reference of the trigger
message associated with the request. When the callback is called, the
message is passed as an argument. The callback is responsible for
taking the message reference if necessary. Once the callback returns,
agent releases its reference.
For error paths, our code was using dbus_pending_reply which in turn
uses dbus_message_unref. This caused the agent to try an unref
operation on an already freed object.
Move the calling of the *_shutdown functions from the signal handler to
a new public function, and use that function inside the DBus disconnect
handler to make sure resources are cleanly released.
Skip the matching of the PMKID KDE to the PMKID list in the RSNE if
we've seen a new EAP authentication before the step 1/4 was received.
That would mean that the server had not accepted the PMKIDs we submitted
and we performed a new 8021X authentication, producing a new PMKSA which
won't be on the list in the RSNE.
Currently we'd send EAPOL-Start whenever EAP was configured and we
received an EAPOL-Key before EAP negotiation. Instead only do that if
we know we can't respond to the 4-Way handshake because we don't have
a PMK yet or the PMKID doesn't match. Require a PMKID in step 1/4 if
we'd sent a list of PMKIDs in our RSNE.
Modify the packet filter to also accept frames with ethertype of 0x88c7
and pass the ethertype value to __eapol_rx_packet so it can filter out
the frames where this value doesn't match the sm->preauth flag.
Add a wrapper for eapol_start that sets the sm->preauth flag and sends
the EAPOL-Start frame immediately to skip the timeout since we know
that the supplicant has to initiate the authentication.
Use netdev_reassociate if FT is not available. device_select_akm_suite
is only moved up in the file and the reused code from device_connect is
moved to a separate function.
netdev_reassociate transitions to another BSS without FT. Similar to
netdev_connect but uses reassociation instead of association and
requires and an existing connection.
Pass an additional parameter to the scan results notify functions to
tell them whether the scan was successful. If it wasn't don't bother
passing an empty bss_list queue, pass NULL as bss_list. This way the
callbacks can tell whether the scan indicates there are no BSSes in
range or simply was aborted and the old scan results should be kept.
++++++++ backtrace ++++++++
0 0x7fc0b20ca370 in /lib64/libc.so.6
1 0x4497d5 in l_dbus_message_new_error_valist() at /home/denkenz/iwd/ell/dbus-message.c:372
2 0x44994d in l_dbus_message_new_error() at /home/denkenz/iwd/ell/dbus-message.c:394
3 0x41369b in dbus_error_not_supported() at /home/denkenz/iwd/src/dbus.c:148
4 0x40eaf5 in device_connect_network() at /home/denkenz/iwd/src/device.c:1282
5 0x41f61c in network_autoconnect() at /home/denkenz/iwd/src/network.c:424
6 0x40c1c1 in device_autoconnect_next() at /home/denkenz/iwd/src/device.c:172
7 0x40cabf in device_set_scan_results() at /home/denkenz/iwd/src/device.c:368
8 0x40cb06 in new_scan_results() at /home/denkenz/iwd/src/device.c:376
9 0x41be8a in scan_finished() at /home/denkenz/iwd/src/scan.c:1021
10 0x41bf9e in get_scan_done() at /home/denkenz/iwd/src/scan.c:1048
11 0x43d5ce in destroy_request() at /home/denkenz/iwd/ell/genl.c:136
12 0x43ded1 in process_unicast() at /home/denkenz/iwd/ell/genl.c:395
13 0x43e295 in received_data() at /home/denkenz/iwd/ell/genl.c:502
14 0x43aa62 in io_callback() at /home/denkenz/iwd/ell/io.c:120
15 0x439632 in l_main_run() at /home/denkenz/iwd/ell/main.c:375 (discriminator 2)
16 0x403074 in main() at /home/denkenz/iwd/src/main.c:261
17 0x7fc0b20b7620 in /lib64/libc.so.6
Also handle the case of a periodic scan when handling a
NL80211_CMD_SCAN_ABORTED. The goal is to make sure the supplied callback
is always called if .trigger was called before, but this should also fix
some other corner cases.
* I add a sp.triggered field for periodic scans since sc->state doesn't
tell us whether the scan in progress was triggered by ourselved o
someone else (in that case .trigger has not been called)
* Since the NL80211_CMD_SCAN_ABORTED becomes similar to get_scan_done I
move the common code to scan_finished
* I believe this fixes a situation where we weren't updating sc->state
if we'd not triggered the scan, because both get_scan_done and the
NL80211_CMD_SCAN_ABORTED would return directly.
If the current request is not freed when we receive the
NL80211_CMD_SCAN_ABORTED event, device.c will keep thinking that
we're still scanning and the scan.c logic also gets confused and may
resend the current request at some point and call sr->trigger again
causing a segfault in device.c.
I pass an empty bss_list to the callback, another possibility would be
to pass NULL to let the callback know not to replace old results yet.
The callbacks would need to handle a NULL first.
Handle the changes of interface address in RTNL New Link messages
similarly to the name changes, emit a NETDEV_WATCH_EVENT_ADDRESS_CHANGE
event and a propety change on dbus.
Note this can only happen when the interface is down so it doesn't
break anything but we need to handle it anyway.
DBus has certain rules on what constitutes a valid path. Since the
wiphy name is freeform, it is possible to set it such that the contents
do not contain a valid path.
We fall back to simply using the wiphy index as the path.
DBus strings must be valid utf8. The kernel only enforces that the
wiphy name is null terminated string. It does not validate or otherwise
check the contents in any way. Thus it is possible to have
non-printable or non-utf8 characters inside.
NL80211_CMD_SET_WIPHY can be used to set various attributes on the wiphy
object in the kernel. This includes ATTR_WIPHY_NAME among others. iwd
currently does not parse or store any of the other attributes, so we
react to changes in WIPHY_NAME only.
The wiphy attribute should never be repeated by the kernel, so this
check is ultimately not needed. This condition can also be easily
checked by looking at the iwmon output in case things do go terribly
wrong.
Fix 1a64c4b771 by setting use_eapol_start
by default only when 8021x authentication is configured. Otherwise we'd
be sending EAPOL-Start even for WPA2 Personal possibly after the 4-Way
Handshake success.
This implements very initial support of WPS PIN based connections. The
scanning logic attempts to find an AP in PIN mode and tries to connect
to that AP. We currently do not try multiple APs if available or
implement the WSC 1.0 connection logic.
Right now the code checks for is_rsn to wait for the 4-way handshake and
sends the NETDEV_EVENT_4WAY_HANDSHAKE. However, is_rsn condition is not
true for WSC connections since they do not set an RSN field. Still,
they are EAP based handshakes and should be treated in the same manner.
We relax the is_rsn check to instead check for netdev->sm. Currently
netdev->sm is only non-NULL if handshake->own_ie field is not NULL or in
the case of eap-wsc connections.
Define minimum delay between roam attempts and add automatic retries.
This handles a few situations:
* roam attempt failing, then RSSI going above the threshold and below
again -- in that case we don't want to reattempt too soon, we'll only
reattempt after 60s.
* roam attempt failing then RSSI staying low for longer than 60 -- in
that case we want to reattempt after 60s too.
* signal being low from the moment we connected -- in that case we also
want to attempt a roam every some time.
Fix a leak of the MDE buffer. It is now only needed for the single call
to handshake_state_set_mde which copies the bytes anyway so use a buffer
on stack.
