39ee15dbc3
build: Provide modules-load.d for loading pkcs8_key_parser module
2019-01-23 18:22:11 +01:00
58f7b06c01
unit: Switch eap-mschapv2 test to use mschaputil
2019-01-10 17:04:57 -06:00
9b722197ba
ecc: Remove remaining ECC/ECDH files
...
ECC primitives have now been fully converted / moved to ell.
2019-01-10 16:27:09 -06:00
a44969f837
build: Add ell/tls-suites.c and ell/tls-extensions.c
2019-01-05 21:24:29 +01:00
c2094c5e04
ecdh: remove ECDH and unit tests
...
ECDH was moved into ell and is no longer needed in IWD
2018-12-12 11:12:27 -06:00
82ac1e0ba5
build: added ecc/ecdh into ell headers and sources
2018-12-12 10:55:39 -06:00
c4803d3b12
build: make client unit test conditional on --{enable,disable}-client
...
The iwctl client and its unit test depends on readline. If building on a
host without readline installed, default make target succeeds when
configured with --disable-client, but the following make check target
fails.
Fix this by making the test-client target conditional on the
--{enable,disable}-client configure flag.
2018-11-22 15:06:48 +01:00
007d972046
unit: allow ECDH test vector to run without l_getrandom
...
Using the gcc wrap feature, l_getrandom was redefined to use a known
good, hardcoded random value. The two other tests were also disabled
if l_getrandom is not supported since these do require randomness
for proper testing.
2018-11-20 17:28:44 -06:00
4f2fe6370f
build: Add new cert files from ell
2018-11-19 17:10:53 -06:00
8978f8c43f
owe: added OWE module
...
This module is similar to SAE in that it communicates over authenticate
and associate frames. Creating a new OWE SM requires registering two TX
functions that handle sending the data out over CMD_AUTHENTICATE/ASSOCIATE,
as well as a complete function.
Once ready, calling owe_start will kick off the OWE process, first by
sending out an authenticate frame. There is nothing special here, since
OWE is done over the associate request/response.
After the authenticate response comes in OWE will send out the associate
frame which includes the ECDH public key, and then receive the AP's
public key via the associate response. From here OWE will use ECDH to
compute the shared secret, and the PMK/PMKID. Both are set into the
handshake object.
Assuming the PMK/PMKID are successfully computed the OWE complete callback
will trigger, meaning the 4-way handshake can begin using the PMK/PMKID
that were set in the handshake object.
2018-11-16 18:06:42 -06:00
dddbf22ab7
unit: added ECDH unit tests
2018-11-16 16:25:20 -06:00
5811e72940
ecdh: added ECDH module
2018-11-16 16:25:17 -06:00
30c79d2633
build: Generate ell/ell.h from list of public headers
2018-10-30 20:54:16 +01:00
5bec514229
build: Include ell/utf8.h and ell/utf8.c into build objects
2018-10-26 21:22:37 +02:00
4412cbf1b4
build: Include ell/strv.h and ell/strv.c into build objects
2018-10-25 23:24:41 +02:00
b46376980a
mschaputil: Add MS CHAP utilities
2018-10-24 16:28:46 -05:00
282a9f1a14
build: fix out-of-tree builds
...
In out-of-tree builds without dependency tracking the src/ directory generally
won't be created before genbuiltin tries to write into it. Fix the race by
explicitly creating the directory.
2018-10-20 19:19:31 +02:00
c9c5cbcd27
build: Remove fswatch.[ch] files from ELL compilation
2018-10-19 20:12:01 +02:00
d22e57c994
treewide: Remove use of key-private.h
2018-10-19 00:31:41 -05:00
2200b2663e
build: Add support for compiling with an external ELL shared library
2018-10-18 20:31:29 +02:00
a3c1fa28da
build: Rename nl80211_util.[ch] into nl80211util.[ch]
2018-10-14 05:41:06 +02:00
04a9315a3c
nl80211: introduce nl80211 utility API's
...
Netdev/AP share several NL80211 commands and each has their own
builder API's. These were moved into a common file nl80211_util.[ch].
A helper was added to AP for building NEW_STATION to make the associate
callback look cleaner (rather than manually building NEW_STATION).
2018-10-08 21:34:58 -05:00
f16e671e62
build: Include ell/dir.h and ell/dir.c into build objects
2018-10-04 22:54:32 +02:00
410ee2f6b9
eap-tls-common: introduce utility functions for eap-tls
2018-09-21 12:15:25 -05:00
004c9ebcd0
build: Fix typo within eap-wsc.h header path
2018-09-19 21:57:28 +02:00
6b46beef45
client: Move properties from Device to Station
2018-09-14 21:12:11 -05:00
247b2ccc5c
wired: Move D-Bus setup into separate source file
2018-09-14 23:29:46 +02:00
b8d45a440a
wired: Add initial version of Ethernet authentication daemon
2018-09-14 19:49:10 +02:00
1e37ef31fe
eapol: Move eapol_key_validate() into eapolutil helper
2018-09-14 17:31:42 +02:00
c40be7a7d5
monitor: Add EAP dummy method to keep linker happy
2018-09-14 17:12:47 +02:00
4a345511a7
wired: Add skeleton for Ethernet device handling and EAP setup
2018-09-14 16:41:05 +02:00
fd181839f7
build: Introduce $(eap_sources) for splitting EAP from daemons
2018-09-14 16:35:04 +02:00
502aac073f
tools: Add configure option and D-Bus policy file for hwsim utility
2018-09-14 15:24:15 +02:00
c9b460f5cc
build: Add D-Bus policy for Ethernet authentication daemon
2018-09-14 15:07:30 +02:00
706f0775c3
build: Add option to disable the wireless daemon binary
2018-09-14 14:36:07 +02:00
5efc88f3af
build: Add systemd service configuration for Ethernet daemon
2018-09-14 14:09:53 +02:00
a053084228
build: Prepare the systemd configuration option for extensions
2018-09-14 14:07:34 +02:00
f81570eb75
build: Enable all optional features during distcheck
2018-09-14 13:53:55 +02:00
0071ecef8b
build: Add skeleton for Ethernet authentication daemon
2018-09-14 13:47:51 +02:00
8da33905f4
build: Add configuration for building internal utilities
2018-09-14 13:46:55 +02:00
f2d4b9afbd
build: Move plugin conditionals closer to the daemon sources
2018-09-14 13:46:15 +02:00
a01bbcfc19
build: Split noinst_PROGRAMS and libexec_PROGRAMS statements
2018-09-14 13:40:21 +02:00
b6720d52ac
build: Fix source file entries for hwsim and test-runner
2018-09-14 13:33:08 +02:00
641e71a02f
station: Add skeleton
2018-08-31 20:24:15 -05:00
26246e75c8
unit: tests for SAE
2018-08-15 13:26:58 -05:00
220fb61128
sae: implementation
...
SAE (Simultaneous Authentication of Equals) takes place during
authentication, and followed by EAPoL/4-way handshake. This
module handles the entire SAE commit/confirm exchange. This was
done similar to eapol.
SAE begins when sae_register is called. At this point a commit
message will be created and sent out which kicks off the SAE
authentication procedure.
The commit/confirm exchange is very similar to EAP-PWD, so all
the ecc utility functions could be re-used as-is. A few new ecc
utility functions were added to conform to the 80211 'blinding'
technique for computing the password element.
2018-08-13 20:40:59 -05:00
28573c90d1
build: Add support for systemd D-Bus activation
2018-08-06 22:37:22 +02:00
efe45e4180
client: add client support for AdHoc
2018-07-30 09:00:57 -05:00
0fec184eae
client: add client support for AP
2018-07-30 09:00:57 -05:00
bb1a0adec7
client: introduce proxy property utils
...
All of the shared functions related to the processing of the
proxy properties will reside in this collection.
2018-07-25 11:21:14 -05:00
2ca2d080d5
build: Add fswatch.[ch] from ell
2018-07-23 11:45:29 -05:00
c37146d403
wsc: Rework wsc_init & wsc_exit
...
- wsc module does not need nl80211 any longer, so remove it.
- Move wsc_init & wsc_exit declarations to iwd.h and remove wsc.h
- re-arrange how wsc_init & wsc_exit is called inside main.c.
2018-07-17 19:19:09 -05:00
55cb9aa2e9
adhoc: adhoc implementation
2018-07-17 16:46:18 -05:00
1d40c6cee7
build: Add util.c to test-eapol
...
src/eapol.c now uses util_*
2018-06-22 14:40:46 -05:00
180a893c0c
unit: Update to the new EAP API
2018-06-14 20:01:22 -05:00
a2d8054218
eap: Separate private bits into eap-private.h
2018-06-14 20:01:19 -05:00
5616962bb2
unit: Update scan_get_security usage to new API
2018-05-24 19:22:16 -05:00
3d69c3b134
build: Remove readline header files from sources listing
2018-05-05 09:19:01 +02:00
85a1678147
client: introduce agent
2018-05-03 16:00:23 -05:00
d1a00d9b34
client: implement agent-manager API
2018-05-03 16:00:23 -05:00
d10369cf60
eap-pwd: core EAP-PWD code
2018-05-03 10:50:30 -05:00
49d313ab68
unit: Add ECC math sanity tests
2018-05-03 10:48:46 -05:00
fdee72dffc
ecc: added ecc implementation for EAP-PWD
...
The file, src/ecc.c was taken from the bluez project:
https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/src/shared/ecc.c
There were minor changes made, e.g. changing some functions to globals
for access in EAP-PWD as well as removing some unneeded code. There was
also some code appended which allows for point addition, modulus inverse
as well as a function to compute a Y value given an X.
2018-05-03 10:27:53 -05:00
ab9c5670f7
build: Add new ell files
2018-04-19 10:23:54 -05:00
6de76f97b4
build: Add net.[ch] from ell
2018-04-10 00:18:11 -05:00
c0739c1965
eap-gtc: add EAP-GTC method implementation
2018-04-04 09:42:28 -05:00
7501d9372b
unit: network args parser validation
2018-03-28 14:33:00 -05:00
fe3a85ae05
build: Add extra dependency for internal ELL library
2018-02-11 21:03:36 +01:00
c31244ddec
build: Add support for installing systemd service unit
2018-02-10 18:42:43 +01:00
9f19cc3d25
build: Add option to disable monitor and client utilities
2018-02-09 17:14:31 +01:00
1f7d44056c
build: Separate between D-Bus policy and data directory
2018-02-09 17:01:31 +01:00
b4c9e63a8b
build: Make D-Bus policy configuration install optional
2018-01-29 02:55:54 -08:00
0cf589e13d
build: Don't provide iwd/main.conf during make install
2018-01-29 02:20:52 -08:00
980f6f3645
main: Rename iwd/iwd.conf into iwd/main.conf
2018-01-29 02:13:41 -08:00
20e74e8679
eap-peap: Introduce Protected EAP support
2018-01-24 11:19:56 -06:00
0565c484d1
build: Add key-private.h from ell to build
2018-01-23 15:27:02 -06:00
4911ba1e59
unit: updated Makefile to build simauth.c for eap-sim
2017-12-13 17:13:29 -06:00
5d6118681d
plugins: added ofono plugin to build
2017-12-13 11:53:42 -06:00
dd867a1e13
build: Add new dbus-client.[ch] files from ell
2017-12-06 15:05:06 -06:00
074fb7df56
make: added hardcoded SIM plugin to build
2017-12-06 15:04:07 -06:00
6c95faf88f
make: added simauth source to build
2017-11-30 08:49:49 -06:00
8c6099fb9e
plugins: added plugin module to build
2017-11-28 13:30:44 -06:00
517df48101
make: plugin system for build
...
Preperation for ell plugins. New plugins can be added to
builtin_sources/builtin_modules, which will be added
to src/builtin.h when it is generated.
2017-11-28 13:20:33 -06:00
525ecbb113
unit: Remove pbkdf2_sha1 tests
...
They can now be moved to ELL.
2017-10-09 14:34:31 -05:00
47ae1c2f06
unit: Add IE order tests in test-mpdu
2017-09-22 12:15:37 -05:00
ac819aea67
build: Add file.[ch] from ell
2017-09-22 10:07:06 -05:00
212bc08104
ap: Add AP mode api
...
Very basic WPA2-PSK only access point mode API with stubs of the start and
stop functions.
2017-09-12 14:29:34 -05:00
f05c3c30d1
eapol: Add eapol_frame_watch_add / remove
...
Allow other files to receive EAPoL frames on specified interfaces.
2017-09-07 16:16:42 -05:00
5cbd0aa1d9
build: Make sure iwd-dbus.conf gets included in the distribution
2017-08-30 23:37:19 +02:00
aa668df7c9
build: Remove readline/readline.h and readline/history.h from SOURCES
2017-08-30 23:29:18 +02:00
6aaa917dde
aka: EAP-AKA protocol implementation
2017-08-21 18:20:10 -05:00
b2fe7fe230
unit: EAP-SIM unit tests
...
Several unit tests for EAP-SIM functionality:
- Get/Add attributes
- MAC calculation
- PRNG test
2017-08-21 18:03:13 -05:00
283717b22f
sim: EAP-SIM protocol implementation
2017-08-21 17:43:55 -05:00
d67f8acd57
build: Add new files from ell
2017-08-14 16:32:35 -05:00
50d04e99a7
Makefile: install iwd-dbus.conf
2017-05-04 18:03:13 -05:00
cb40e36ea1
client: introduce psk agent manager
2017-05-02 14:11:00 -05:00
b1d261a790
client: add WSC argument completers
2017-05-01 13:42:21 -05:00
ee369bacc9
client introduce wsc interface
2017-05-01 13:40:14 -05:00
60c4025cdf
client: Introduce adapter interface
2017-04-27 15:11:59 -05:00
0be4a82946
client: Remove excluded client/device.h
2017-04-21 15:00:57 -05:00
Marcel Holtmann