Denis Kenzior
926cc6cd17
agent: Use a generic pointer for the callback
...
Since this function is generic, no need to use a specific callback type.
2015-03-02 21:07:49 -06:00
Jukka Rissanen
e17d2d63c2
agent: Make sure Release is sent when iwd exits
...
The main loop cannot be quit in signal handler as that would
prevent the agent.c from sending the Release command to the agent.
2015-03-02 20:59:01 -06:00
Jukka Rissanen
02a8eddd8f
agent: Release the agent when iwd quits
...
Send Release command to agent and remove used resources when
iwd exits.
2015-03-02 20:57:39 -06:00
Jukka Rissanen
405b724266
agent: Cancel pending agent request
...
Allow user to cancel a pending user agent request. This typically
happens when user decides to disconnect a pending connection
request.
2015-03-02 20:57:14 -06:00
Jukka Rissanen
c275fca1e3
agent: Ask passphrase from the user agent
...
Add support for asking passphrase information from the registered
user agent.
2015-03-02 20:56:12 -06:00
Jukka Rissanen
e6e4649a40
agent: Implement request core
...
This patch adds core support for sending and managing requests
that are sent to user agent.
2015-03-02 20:46:45 -06:00
Tomasz Bursztyka
ab07091f8c
util: Move msg_append_attr into util part
2015-03-02 20:44:02 -06:00
Denis Kenzior
1d8b330261
wiphy: Use new l_genl send() APIs
2015-02-27 11:00:45 -06:00
Denis Kenzior
feefad9957
scan: use new l_genl send APIs
2015-02-27 11:00:27 -06:00
Jukka Rissanen
5c4a2cf61a
manager: Initialize the agent dbus interface
2015-02-27 10:42:58 -06:00
Jukka Rissanen
4e0fc2150d
agent: DBus agent register and unregister
...
Implement DBus agent register and unregister functions.
2015-02-27 09:40:59 -06:00
Jukka Rissanen
b46f06a9ad
agent: Initial agent support
...
Init, setup and exit functions.
2015-02-27 09:37:32 -06:00
Ravi kumar Veeramally
67cdc80753
wiphy: Open PAE socket when an interface is found
...
Open a PAE socket to retrieve eapol frames for 4-way handshake.
2015-02-26 10:55:01 -06:00
Ravi kumar Veeramally
db45cd8dbf
eapol: Provide utility to open raw socket
...
Opens a raw socket to filter ETH_P_PAE based packets. Binds to specific
interface index to read/write eapol frames.
2015-02-26 10:54:05 -06:00
Tomasz Bursztyka
6b018ca6f7
wiphy: Reduce static allocation size
...
iwd_device_get_path() is not going to produce longer string than 12
bytes (/ + maximum of uint32_t expressed as a string + '\0').
2015-02-26 10:05:16 -06:00
Denis Kenzior
b067c08cfe
wiphy: Remove unneeded initialization
2015-02-26 10:03:51 -06:00
Denis Kenzior
e69b21ccdf
wiphy: Don't store rsne unless needed
...
Open networks do not contain a RSN element, so storing a 256 byte buffer
was too expensive.
This patch also has the side-effect of fixing detection of Open
Networks. Prior to this, if the scan results did not contain an RSN IE,
the 'rsne' variable would be set to all zeros. scan_get_ssid_security
would then be called, but instead of a NULL struct ie_rsn_info, a
non-null, but zerod out ie_rsn_info would be passed in. This caused the
code to work, but for the wrong reasons.
2015-02-25 21:13:24 -06:00
Denis Kenzior
458ad2af77
wiphy: Set authentication parameters for WPA2
2015-02-25 20:56:46 -06:00
Ravi kumar Veeramally
19957f1162
wiphy: Remove extra white space
2015-02-25 11:34:42 -06:00
Ravi kumar Veeramally
46cdef5f7b
wiphy: Fix deauthenticate event from AP
...
If AP issued deauthenticate event, netdev->connect_pending is null.
iwd crashes without this check.
2015-02-25 11:23:46 -06:00
Denis Kenzior
97a92a9d02
wiphy: Don't connect to networks we don't support
2015-02-24 23:19:27 -06:00
Denis Kenzior
d77238d5fd
dbus: Add not supported error
2015-02-24 23:19:16 -06:00
Denis Kenzior
41e82fba77
eapol: Optimize out rsne sizes
...
The RSN IEs contain the sizes of the element inside the data, so it is
not necessary to carry a dedicated size element.
2015-02-24 23:15:20 -06:00
Denis Kenzior
975953dd89
wiphy: Store RSN IE inside struct bss
2015-02-24 23:11:48 -06:00
Denis Kenzior
c9bab96237
wiphy: Store ssid in static buffer
...
Instead of mallocing the ssid buffer, use a static array. This removes an
extra couple of malloc/free operations and should result in less memory
utilization on average.
2015-02-24 23:03:15 -06:00
Denis Kenzior
9760bcb5c3
eapol: Add checking that first RSNE is as expected
2015-02-24 22:09:35 -06:00
Denis Kenzior
7f9b8117fd
eapol: Add utility to find GTK KDEs
2015-02-24 17:11:56 -06:00
Denis Kenzior
b1ca41b476
ie: Add length/data/tag inline getters
2015-02-24 17:11:27 -06:00
Denis Kenzior
bfdd4a2328
eapol: Pass decrypted data len
...
to eapol_handle_ptk_3_of_4
2015-02-24 16:03:42 -06:00
Denis Kenzior
c71bfcbb7c
eapol: Decryption of packets changes affects size
2015-02-24 15:59:36 -06:00
Jukka Rissanen
0403be7fee
dbus: Add more error reporting functions
...
Report error for
- invalid dbus arguments
- if object already exists
- if object is not found
2015-02-24 11:19:49 -06:00
Denis Kenzior
f997816a7f
eapol: Handle Step 2 & 4 of the 4-way Handshake
2015-02-24 11:14:11 -06:00
Denis Kenzior
da1180841d
eapol: Handle Step 1 & 2 of 4-way Handshake
2015-02-24 11:13:57 -06:00
Denis Kenzior
9e6cbc5b60
eapol: Add __eapol_rx_packet
2015-02-24 11:13:19 -06:00
Denis Kenzior
4a540526fe
eapol: Add eapol_start
2015-02-24 11:12:22 -06:00
Denis Kenzior
2ee8b8e56e
eapol: Add __eapol_set_protocol_version
2015-02-24 11:11:40 -06:00
Denis Kenzior
87dc9543b2
eapol: Add tx_packet_func and setter
2015-02-24 11:10:42 -06:00
Denis Kenzior
54fa4f29c7
eapol: Add get_nonce func and setter
2015-02-24 11:09:42 -06:00
Denis Kenzior
79bf677e71
eapol: Add eapol_init and eapol_exit
2015-02-24 11:08:03 -06:00
Denis Kenzior
2e1e484f95
eapol: Add eapol_sm_set_own_rsn
2015-02-24 10:58:43 -06:00
Denis Kenzior
08b2980fd6
eapol: Add eapol_sm_set_ap_rsn
2015-02-24 10:58:03 -06:00
Denis Kenzior
f85c860cc3
eapol: Add eapol_sm_set_pmk
2015-02-24 10:57:25 -06:00
Denis Kenzior
ff92e5c5e1
eapol: Add eapol_sm_set_aa_address
2015-02-24 10:56:39 -06:00
Denis Kenzior
122dfe7025
eapol: Add eapol_sm_set_sta_address
2015-02-24 10:55:50 -06:00
Denis Kenzior
2866fbbf91
eapol: Introduce eapol_sm
2015-02-24 10:54:23 -06:00
Denis Kenzior
bf42e3e7a3
eapol: snonce not needed in create_ptk_4_of_4
2015-02-24 10:52:12 -06:00
Denis Kenzior
6ba57c9fa8
eapol: Fix eapol_verify_mic
...
The calculation was using an invalid length
2015-02-24 10:42:20 -06:00
Denis Kenzior
a0bf16c5ca
eapol: Refactor verification functions
...
Use a macro for common checks. Assume that the validate step will be
done separately.
2015-02-23 15:39:26 -06:00
Ravi kumar Veeramally
8f5ca9dc73
wiphy: Implement initial disconnect functionality
...
Adding initial network disconnection implementation. Sends
deauthentication and reply through dbus depends upon its response.
2015-02-20 09:47:50 -06:00
Jukka Rissanen
d6fbb2dcac
dbus: Add agent interface definition
2015-02-19 10:14:47 -06:00
Denis Kenzior
6a4b75cf8d
eapol: Add eapol_verify_mic
2015-02-18 21:13:09 -06:00
Denis Kenzior
ad3e0b6bf2
arc4: Remove and move to src/crypto.c
2015-02-18 21:11:37 -06:00
Denis Kenzior
b3e617838d
aes: Remove and move to src/crypto.c
2015-02-18 21:02:09 -06:00
Denis Kenzior
260ef5bb9d
md5: Remove and move to src/crypto.c
2015-02-18 20:56:18 -06:00
Denis Kenzior
02d101e3d7
sha256: Remove and move to src/crypto.c
2015-02-18 20:45:52 -06:00
Denis Kenzior
89e4538945
eapol: Rework eapol_decrypt_key_data
...
802.11 uses AES Key Wrap and RC4 with the first 256 bytes skipped. The
IV is also initialized into the RC4 key.
2015-02-17 17:39:47 -06:00
Denis Kenzior
dd56283b11
arc4: Add arc4_skip
2015-02-17 16:53:15 -06:00
Denis Kenzior
6e6783fc11
aes: Add aes_unwrap
2015-02-17 16:53:15 -06:00
Denis Kenzior
cd08cdfd9f
eapol: Add eapol_decrypt_key_data
2015-02-13 20:37:17 -06:00
Denis Kenzior
85e54c66fe
eapol: Add eapol_verify_ptk_4_of_4
2015-02-13 18:38:10 -06:00
Ravi kumar Veeramally
f63b8b2ec9
wiphy: Fix open network connection
...
Authenticate event on wiphy mlme notification does not provide
enough information on which network/bss authentication command
was sent. BSS and network information is required to send associate
command to AP. So cache bss pointer in netdev struct and retrieve
on wiphy mlme notifications.
2015-02-13 17:04:31 -06:00
Ravi kumar Veeramally
b1af2b6fe5
wiphy: Handle scan pending properly in netdev_free
...
If the device scan call reply is pending still on netdev_free call,
reply operation aborted.
2015-02-13 17:01:35 -06:00
Ravi kumar Veeramally
7f56f561c6
dbus: Provide dbus_error aborted and not_available
2015-02-13 17:01:06 -06:00
Denis Kenzior
0570940cd7
eapol: Add eapol_verify_ptk_3_of_4
2015-02-13 16:36:52 -06:00
Denis Kenzior
f9515fbe97
eapol: Add additional sanity checks for step 2
2015-02-13 16:36:24 -06:00
Denis Kenzior
9b746cd3c1
eapol: Update comment
2015-02-13 16:12:43 -06:00
Denis Kenzior
54d4090542
eapol: Tweak API
...
We need to extract quite a bit of information from the EAPoL frames, so
tweak the API to just verify that a frame is of a particular type
2015-02-13 16:08:45 -06:00
Denis Kenzior
7ffe465ab2
sha256: Remove unneeded resets
2015-02-13 15:02:16 -06:00
Denis Kenzior
0abbde0ebb
sha1: Remove unneeded resets
2015-02-13 15:02:04 -06:00
Denis Kenzior
87f775475a
eapol: Handle cmac_aes in eapol_calcuate_mic
2015-02-13 14:53:16 -06:00
Denis Kenzior
63aae17aa8
eapol: Take out unneeded cast
2015-02-13 14:52:24 -06:00
Denis Kenzior
df8d60d7e1
eapol: Add eapol_create_ptk_4_of_4
2015-02-13 14:10:28 -06:00
Denis Kenzior
005fc0c0d1
eapol: Handle key_replay_counter as a uint64_t
2015-02-13 13:54:50 -06:00
Denis Kenzior
fc60014d47
ie: Add ie_build_rsne
2015-02-03 21:45:14 -06:00
Denis Kenzior
51dfb02ade
ie: Add ie_build_akm_suite
2015-02-03 21:44:56 -06:00
Denis Kenzior
5653baa0b9
ie: Add ie_build_cipher_suite
2015-02-03 21:44:35 -06:00
Denis Kenzior
7f5bb70422
ie: Move ieee_oui to toplevel
2015-02-03 21:11:26 -06:00
Jukka Rissanen
3d251562f8
dbus: Remove useless info message print
...
No need for this info any more.
2015-02-03 11:34:16 -06:00
Jukka Rissanen
2fad305d3c
dbus: Remove obsolete debug print
...
This print is quite useless.
2015-02-03 11:34:08 -06:00
Jukka Rissanen
6ddd2b894d
scan: SSID security check was missing values
...
Refactoring SSID security check function to work properly so that
it can differentiate AP security setting correctly.
2015-02-02 15:09:50 -06:00
Denis Kenzior
26010b8459
wiphy: Optimize scanning data structures
...
Instead of storing multiple copies of the same BSS (one hanging off the
netdev object and one hanging off the network object), we instead store
the BSS list only on the netdev object.
The network object gets a pointer to the BSS structure on the netdev
list. As a side effect, the BSS list is always sorted properly.
2015-01-28 21:23:17 -06:00
Denis Kenzior
6f3e4ef594
wiphy: Restructure lost_bss() function
...
- Remove unneeded nesting
- Rework logic slightly
2015-01-28 21:23:17 -06:00
Jukka Rissanen
4c5498d4cd
wiphy: Remove those networks that do not have any BSS
...
If all the BSSs having same SSID and security have disappeared
from network, then the network can be removed also.
2015-01-28 21:23:16 -06:00
Denis Kenzior
c283557215
wiphy: Remove unneeded brackets
2015-01-28 21:23:16 -06:00
Denis Kenzior
1894b75a18
wiphy: Remove unneeded nesting
2015-01-28 21:23:16 -06:00
Denis Kenzior
0303a095aa
wiphy: Remove unneeded variable
...
Instead of always mallocing space for the ssid array, and then freeing
it in most circumstances, do the opposite. Only allocate the array once
it is actually needed. This has the side effect of removing an unneeded
variable and making the code simpler.
2015-01-28 21:23:16 -06:00
Denis Kenzior
9f042ff1b8
wiphy: Ignore BSSes with no SSID
2015-01-28 21:23:16 -06:00
Denis Kenzior
b342f819f9
wiphy: Make const correct
2015-01-28 21:23:16 -06:00
Jukka Rissanen
d27c947209
wiphy: expose network objects instead of BSSes
...
The idea here is that network object will contain a list of BSS
that have the same SSID and security setting. From user point of view,
we will connect to a certain SSID instead of connecting directly to
a BSS. We pick the best BSS automatically from the BSS list when
connecting to a SSID.
2015-01-28 21:23:16 -06:00
Denis Kenzior
ce3ffd732f
scan: Make const correct
2015-01-28 21:23:16 -06:00
Jukka Rissanen
8f73bc825f
scan: Add utility to categorize BSS security type
...
Utility function gets the RSNE information element and
figures out whether the SSID is Open, WEP, PSK or 802.1X
network.
2015-01-28 12:34:01 -06:00
Jukka Rissanen
27b45f926b
ie: Add capability enum
2015-01-28 12:33:47 -06:00
Jukka Rissanen
9e655106fa
wiphy: MLME warning message text incorrect
...
MLME notify function prints error if wiphy or netdev is missing.
The error text in this case talks about scan notification instead
of more proper MLME notification.
2015-01-28 11:49:03 -06:00
Jukka Rissanen
bd6189aef0
main: Remove obsolete -S option
...
As there is no handler for -S option, we can remove it.
2015-01-26 21:53:55 -06:00
Jukka Rissanen
9c380ad95c
main: DBus debug option -B was missing
...
It was not possible to activate DBus debugging.
2015-01-26 21:53:30 -06:00
Denis Kenzior
5247695d56
mpdu: fix transaction_sequence byte-ordering
...
transaction_sequence was not being considered in host CPU byte order
2015-01-22 12:41:10 -06:00
Denis Kenzior
e60b814dc8
mpdu: algorithm was not swapped to host byte-order
2015-01-22 12:41:10 -06:00
Tomasz Bursztyka
8f946c0cdc
eapol: Change function signatures
...
The frame which comes in is an EAPoL-key frame, thus changing the name
accordingly (as well as the parameter names).
Also, returning the cast pointer instead of a boolean is easier to
use as there won't be any need to perform the cast ourselves afterward
2015-01-22 12:18:17 -06:00
Tomasz Bursztyka
e02f02fa69
mpdu: Change the validation function signature
...
What comes in is a frame, and let's set it to uint8_t pointer, which is
semantically better than unsigned char.
Also, returning the cast pointer instead of a boolean is easier to
use as there won't be any need to perform the cast ourselves afterward
2015-01-22 12:14:47 -06:00
Tomasz Bursztyka
55d3283aeb
mpdu: Add member 'ies' for mpdu_deauthentication
...
Even if this will never really be useful, it's better this way rather
than having a todo comment.
2015-01-21 14:37:27 -06:00
