This increases the maximum data rate which now is possible with HE.
A few comments were also updated, one to include 6G when adjusting
the rank for >4000mhz, and the other fixing a typo.
This is a general way of finding the best MCS/NSS values which will work
for HT, VHT, and HE by passing in the max MCS values for each value which
the MCS map could contain (0, 1, or 2).
The HE capabilities information is contained in
NL80211_BAND_ATTR_IFTYPE_DATA where each entry is a set of attributes
which define the rules for one or more interface types. This patch
specifically parses the HE PHY and HE MCS data which will be used for
data rate estimation.
Since the set of info is per-iftype(s) the data is stored in a queue
where each entry contains the PHY/MCS info, and a uint32 bit mask where
each bit index signifies an interface type.
With the addition of HE, the print function for MCS sets needs to change
slightly. The maps themselves are the same format, but the values indicate
different MCS ranges. Now the three MCS max values are passed in.
This queue will hold iftype(s) specific data for HE capabilities. Since
the capabilities may differ per-iftype the data is stored as such. Iftypes
may share a configuration so the band_he_capabilities structure has a
mask for each iftype using that configuration.
Certain module dependencies were missing, which could cause a crash on
exit under (very unlikely) circumstances.
#0 l_queue_peek_head (queue=<optimized out>) at ../iwd-1.28/ell/queue.c:241
#1 0x0000aaaab752f2a0 in wiphy_radio_work_done (wiphy=0xaaaac3a129a0, id=6)
at ../iwd-1.28/src/wiphy.c:2013
#2 0x0000aaaab7523f50 in netdev_connect_free (netdev=netdev@entry=0xaaaac3a13db0)
at ../iwd-1.28/src/netdev.c:765
#3 0x0000aaaab7526208 in netdev_free (data=0xaaaac3a13db0) at ../iwd-1.28/src/netdev.c:909
#4 0x0000aaaab75a3924 in l_queue_clear (queue=queue@entry=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:107
#5 0x0000aaaab75a3974 in l_queue_destroy (queue=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:82
#6 0x0000aaaab7522050 in netdev_exit () at ../iwd-1.28/src/netdev.c:6653
#7 0x0000aaaab7579bb0 in iwd_modules_exit () at ../iwd-1.28/src/module.c:181
In this particular case, wiphy module was de-initialized prior to the
netdev module:
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/wiphy.c:wiphy_free() Freeing wiphy phy0[0]
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/netdev.c:netdev_free() Freeing netdev wlan0[45]
This fixes a crash associated with toggling the iftype to AP mode
then calling GetDiagnostics. The diagnostic interface is never
cleaned up when netdev goes down so DBus calls can still be made
which ends up crashing since the AP interface objects are no longer
valid.
Running the following iwctl commands in a script (once or twice)
triggers this crash reliably:
iwctl device wlp2s0 set-property Mode ap
iwctl device wlp2s0 set-property Mode station
iwctl device wlp2s0 set-property Mode ap
iwctl ap wlp2s0 start myssid secret123
iwctl ap wlp2s0 show
++++++++ backtrace ++++++++
0 0x7f8f1a8fe320 in /lib64/libc.so.6
1 0x451f35 in ap_dbus_get_diagnostics() at src/ap.c:4043
2 0x4cdf5a in _dbus_object_tree_dispatch() at ell/dbus-service.c:1815
3 0x4bffc7 in message_read_handler() at ell/dbus.c:285
4 0x4b5d7b in io_callback() at ell/io.c:120
5 0x4b489b in l_main_iterate() at ell/main.c:476
6 0x4b49a6 in l_main_run() at ell/main.c:519
7 0x4b4cd9 in l_main_run_with_signal() at ell/main.c:645
8 0x404f5b in main() at src/main.c:600
9 0x7f8f1a8e8b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
About a month ago hostapd was changed to set the secure bit on
eapol frames during rekeys (bc36991791). The spec is ambiguous
about this and has conflicting info depending on the sections you
read (12.7.2 vs 12.7.6). According to the hostapd commit log TGme
is trying to clarify this and wants to set secure=1 in the case
of rekeys. Because of this, IWD is completely broken with rekeys
since its disallows secure=1 on PTK 1/4 and 2/4.
Now, a bool is passed to the verify functions which signifies if
the PTK has been negotiated already. If secure differs from this
the key frame is not verified.
The man pages (iwd.network) have a section about how to name provisioning
files containing non-alphanumeric characters but not everyone reads the
entire man page.
Warning them that the provisioning file was not read and pointing to
'man iwd.network' should lead someone in the right direction.
EAP-Success might come in with an identifier that is incremented by 1
from the last Response packet. Since identifier field is a byte, the
value might overflow (from 255 -> 0.) This overflow isn't handled
properly resulting in EAP-Success/Failure packets with a 0 identifier
due to overflow being erroneously ignored. Fix that.
Most users of storage_network_open don't log errors when the function
returns a NULL and fall back to defaults (empty l_settings).
storage_network_open() itself only logs errors if the flie is encrypted.
Now also log an error when l_settings_load_from_file() fails to help track
down potential syntax errors.
Drop the wrong negation in the error check. Check that there are no extra
characters after prefix length suffix. Reset errno 0 before the strtoul
call, as recommended by the manpage.
This is actually a false positive only because
p2p_device_validate_conn_wfd bails out if the IE is NULL which
avoids using wfd_data_length. But its subtle and without inspecting
the code it does seem like the length could be used uninitialized.
src/p2p.c:940:7: error: variable 'wfd_data_len' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (dev->conn_own_wfd)
^~~~~~~~~~~~~~~~~
src/p2p.c:946:8: note: uninitialized use occurs here
wfd_data_len))
^~~~~~~~~~~~
src/p2p.c:940:3: note: remove the 'if' if its condition is always true
if (dev->conn_own_wfd)
^~~~~~~~~~~~~~~~~~~~~~
src/p2p.c:906:23: note: initialize the variable 'wfd_data_len' to silence this warning
ssize_t wfd_data_len;
^
= 0
On musl-gcc the compiler is giving a warning for igtk_key_index
and gtk_key_index being used uninitialized. This isn't possible
since they are only used if gtk/igtk are non-NULL so pragma to
ignore the warning.
src/fils.c: In function 'fils_rx_associate':
src/fils.c:580:17: error: 'igtk_key_index' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
580 | handshake_state_install_igtk(fils->hs,
igtk_key_index,igtk + 6,
igtk_len - 6, igtk);
(same error for gtk_key_index)
For network configuration files the man pages (iwd.network) state
that [General].{AlwaysRandomizeAddress,AddressOverride} are only
used if main.conf has [General].AddressRandomization=network.
This actually was not being enforced and both iwd.network settings
were still taken into account regardless of what AddressRandomization
was set to (even disabled).
The handshake setup code now checks the AddressRandomization value
and if anything other than 'network' skips the randomization.
There were a few places in dpp/dpp-util which passed a single byte but
was being read in with va_arg(va, size_t). On some architectures this was
causing failures presumably from the compiler using an integer type
smaller than size_t. As we do elsewhere, cast to size_t to force the
compiler to pass a properly sized iteger to va_arg.
After one of the eap-tls-common-based methods succeeds keep the TLS
tunnel instance until the method is freed, rather than free it the
moment the method succeeds. This fixes repeated method runs where until
now each next run would attempt to create a new TLS tunnel instance
but would have no authentication data (CA certificate, client
certificate, private key and private key passphrase) since those are
were by the old l_tls object from the moment of the l_tls_set_auth_data()
call.
Use l_tls_reset() to reset the TLS state after method success, followed
by a new l_tls_start() when the reauthentication starts.
A user reported that IWD was failing to FT in some cases and this was
due to the AP setting the Retry bit in the frame type. This was
unexpected by IWD since it directly checks the frame type against
0x00b0 which does not account for any B8-B15 bits being set.
IWD doesn't need to verify the frame type field for a few reasons:
First mpdu_validate checks the management frame type, Second the kernel
checks prior to forwarding the event. Because of this the check was
removed completely.
Reported-By: Michael Johnson <mjohnson459@gmail.com>
station_signal_agent_notify() has been refactored so that its usage is
simpler. station_rssi_level_changed() has been replaced by an inlined
call to station_signal_agent_notify().
The call to netdev_rssi_level_init() in netdev_connect_common() is
currently a no-op, because netdev->connected has not yet been set at
this stage of the connection attempt. Because netdev_rssi_level_init()
is only used twice, it's been replaced by two inlined calls to
netdev_set_rssi_level_idx().
The SignalLevelAgent API is currently broken by the system bus's
security policy, which blocks iwd's outgoing method call messages. This
patch punches a hole for method calls on the
net.connman.iwd.SignalLevelAgent interface.
There may be situations where DNS information should not be set (for
example in auto-tests where the resolver daemon is not running) or if a
user wishes to ignore DNS information obtained.
Allows granularly specifying the DHCP logging level. This allows the
user to tailor the output to what they need. By default, always display
info, errors and warnings to match the rest of iwd.
Setting `IWD_DHCP_DEBUG` to "debug", "info", "warn", "error" will limit
the logging to that level or higher allowing the default logging
verbosity to be reduced.
Setting `IWD_DHCP_DEBUG` to "1" as per the current behavior will
continue to enable debug level logging.
After the initial handshake, once the TK has been installed, all frames
coming to the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to various attacks.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAPoL frames
received after the initial handshake has been completed.
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAP-Failure frame generated by
an adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAP frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAPoL 1/4 frame generated by an
adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted PTK 1/4 frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Do not fail an ongoing handshake when an invalid EAPoL frame is
received. Instead, follow the intent of 802.11-2020 section 12.7.2:
"EAPOL-Key frames containing invalid field values shall be silently
discarded."
This prevents a denial-of-service attack where receipt of an invalid,
unencrypted EAPoL 1/4 frame generated by an adversary results in iwd
terminating an ongoing connection.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Periodic scan requests are meant to be performed with a lower priority
than normal scan requests. They're thus given a different priority when
inserting them into the wiphy work queue. Unfortunately, the priority
is not taken into account when they are inserted into the
sr->requests queue. This can result in the scanning code being confused
since it assumes the top of the queue is always the next scheduled or
currently ongoing scan. As a result any further wiphy_work might never be
started properly.
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_timeout() 1
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 4
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_done() Work item 3 done
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_notify() Scan notification Trigger Scan(33)
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_request_triggered() Passive scan triggered for wdev 1
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_triggered() Periodic scan triggered for wdev 1
In the above log, scan request 5 (triggered by dbus) is started before
scan request 4 (periodic scan). Yet the scanning code thinks scan
request 4 was triggered.
Fix this by using the wiphy_work priority to sort the sr->requests queue
so that the scans are ordered in the same manner.
Reported-by: Alvin Šipraga <ALSI@bang-olufsen.dk>
The upstream code immediately retransmitted any no-ACK frames.
This would work in cases where the peer wasn't actively switching
channels (e.g. the ACK was simply lost) but caused unintended
behavior in the case of a channel switch when the peer was not
listening.
If either IWD or the peer needed to switch channels based on the
authenticate request the response may end up not getting ACKed
because the peer is idle, or in the middle of the hardware changing
channels. IWD would get no-ACK and immediately send the frame again
and most likely the same behavior would result. This would very
quickly increment frame_retry past the maximum and DPP would fail.
Instead when no ACK is received wait 1 second before sending out
the next frame. This can re-use the existing frame_pending buffer
and the same logic for re-transmitting.
There is a potential corner case of an offchannel frame callback
being called after ROC has ended.
This could happen in theory if a received frame is queued right as
the ROC session expires. If the ROC cancel event makes it to user
space before the frame IWD will schedule another ROC then receive
the frame. This doesn't prevent IWD from sending out another
frame since OFFCHANNEL_TX_OK is used, but it will prevent IWD from
receiving a response frame since no dwell duration is used with DPP.
To handle this an roc_started bool was added to the dpp_sm which
tracks the ROC state. If dpp_send_frame is called when roc_started
is false the frame will be saved and sent out once the ROC session
is started again.
ConnectHiddenNetwork creates a temporary network object and initiates a
connection with it. If the connection fails (due to an incorrect
passphrase or other reasons), then this temporary object is destroyed.
Delay its destruction until network_disconnected() since
network_connect_failed is called too early. Also, re-order the sequence
in station_reset_connection_state() in order to avoid using the network
object after it has been freed by network_disconnected().
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
station_hide_network will remove and free the network object, so calling
network_close_settings will result in a crash. Make sure this is done
prior to network object's destruction.
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
If a user connection fails on a freshly scanned psk or open hidden
network, during passphrase request or after, it shall be removed from
the network list. Otherwise, it would be possible to directly connect
to that known network, which will appear as not hidden.
p2p_peer_update_existing may be called with a scan_bss struct built from
a Probe Request frame so it can't access bss->p2p_probe_resp_info even
if peer->bss was built from a Probe Response. Check the source frame
type of the scan_bss struct before updating the Device Address.
This fixes one timing issue that would make the autotest fail often.
Since l_malloc is used the frame contents are not zero'ed automatically
which could result in random bytes being present in the frame which were
expected to be zero. This poses a problem when calculating the MIC as the
crypto operations are done on the entire frame with the expectation of
the MIC being zero.
Fixes: 83212f9b23 ("eapol: change eapol_create_common to support FILS")
explicit_bzero is used in src/storage.c since commit
01cd858760 but src/missing.h is not
included, as a result build with uclibc fails on:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init':
storage.c:(.text+0x13a4): undefined reference to `explicit_bzero'
Fixes:
- http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1
This is used to hold the current BSS frequency which will be
used after IWD receives a presence announcement. Since this was
not being set, the logic was always thinking there was a channel
mismatch (0 != current_freq) and attempting to go offchannel to
'0' which resulted in -EINVAL, and ultimately protocol termination.
The logic here assumed any BSS's in the roam scan were identical to
ones in station's bss_list with the same address. Usually this is true
but, for example, if the BSS changed frequency the one in station's
list is invalid.
Instead when a match is found remove the old BSS and re-insert the new
one.
With the addition of 6GHz '6000' is no longer the maximum frequency
that could be in .known_network.freq. For more robustness
band_freq_to_channel is used to validate the frequency.
Scanning while in AP mode is somewhat of an edge case, but it does
have some usefulness specifically with onboarding new devices, i.e.
a new device starts an AP, a station connects and provides the new
device with network credentials, the new device switches to station
mode and connects to the desired network.
In addition this could be used later for ACS (though this is a bit
overkill for IWD's access point needs).
Since AP performance is basically non-existant while scanning this
feature is meant to be used in a limited scope.
Two DBus API's were added which mirror the station interface: Scan and
GetOrderedNetworks.
Scan is no different than the station variant, and will perform an active
scan on all channels.
GetOrderedNetworks diverges from station and simply returns an array of
dictionaries containing basic information about networks:
{
Name: <ssid>
SignalStrength: <mBm>
Security: <psk, open, or 8021x>
}
Limitations:
- Hidden networks are not supported. This isn't really possible since
the SSID's are unknown from the AP perspective.
- Sharing scan results with station is not supported. This would be a
convenient improvement in the future with respect to onboarding new
devices. The scan could be performed in AP mode, then switch to
station and connect immediately without needing to rescan. A quick
hack could better this situation by not flushing scan results in
station (if the kernel retains these on an iftype change).
This was already implemented in station but with no dependency on
that module at all. AP will need this for a scanning API so its
being moved into scan.c.
The 802.11ax standards adds some restrictions for the 6GHz band. In short
stations must use SAE, OWE, or 8021x on this band and frame protection is
required.
All uses of this macro will work with a bitwise comparison which is
needed for 6GHz checks and somewhat more flexible since it can be
used to compare RSN info, not only single AKM values.
This adds checks if MFP is set to 0 or 1:
0 - Always fail if the frequency is 6GHz
1 - Fail if MFPC=0 and the frequency is 6GHz.
If HW is capable set MFPR=1 for 6GHz
This is a new band defined in the WiFi 6E (ax) amendment. A completely
new value is needed due to channel reuse between 2.4/5 and 6GHz.
util.c needed minimal updating to prevent compile errors which will
be fixed later to actually handle this band. WSC also needed a case
added for 6GHz but the spec does not outline any RF Band value for
6GHz so the 5GHz value will be returned in this case.
sae.c was failing to build on some platforms:
error: implicit declaration of function 'reallocarray'; did you mean 'realloc'?
[-Werror=implicit-function-declaration]
In certain rare cases IWD gets a link down event before nl80211 ever sends
a disconnect event. Netdev notifies station of the link down which causes
station to be freed, but netdev remains in the same state. Then later the
disconnect event arrives and netdev still thinks its connected, calls into
(the now freed) station object and causes a crash.
To fix this netdev_connect_free() is now called on any link down events
which will reset the netdev object to a proper state.
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/netdev.c:netdev_mlme_notify() MLME notification Del Station(20)
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/netdev.c:netdev_mlme_notify() MLME notification Deauthenticate(39)
src/netdev.c:netdev_deauthenticate_event()
src/netdev.c:netdev_link_notify() event 16 on ifindex 16
src/station.c:station_free()
src/netconfig.c:netconfig_destroy()
src/resolve.c:resolve_systemd_revert() ifindex: 16
src/station.c:station_roam_state_clear() 16
src/netdev.c:netdev_mlme_notify() MLME notification Disconnect(48)
src/netdev.c:netdev_disconnect_event()
Received Deauthentication event, reason: 3, from_ap: false
0 0x472fa4 in station_disconnect_event src/station.c:2916
1 0x472fa4 in station_netdev_event src/station.c:2954
2 0x43a262 in netdev_disconnect_event src/netdev.c:1213
3 0x43a262 in netdev_mlme_notify src/netdev.c:5471
4 0x6706eb in process_multicast ell/genl.c:1029
5 0x6706eb in received_data ell/genl.c:1096
6 0x65e630 in io_callback ell/io.c:120
7 0x65a94e in l_main_iterate ell/main.c:478
8 0x65b0b3 in l_main_run ell/main.c:525
9 0x65b0b3 in l_main_run ell/main.c:507
10 0x65b5cc in l_main_run_with_signal ell/main.c:647
11 0x4124d7 in main src/main.c:532
The difference between the existing code is that IWD will send the
authentication request, making it the initiator.
This handles the use case where IWD is provided a peers URI containing
its bootstrapping key rather than IWD always providing its own URI.
A new DBus API was added, ConfigureEnrollee().
Using ConfigureEnrollee() IWD will act as a configurator but begin by
traversing a channel list (URI provided or default) and waiting for
presence announcements (with one caveat). When an announcement is
received IWD will send an authentication request to the peer, receive
its reply, and send an authentication confirm.
As with being a responder, IWD only supports configuration to the
currently connected BSS and will request the enrollee switch to this
BSS's frequency to preserve network performance.
The caveat here is that only one driver (ath9k) supports multicast frame
registration which prevents presence frame from being received. In this
case it will be required the the peer URI contains a MAC and channel
information. This is because IWD will jump right into sending auth
requests rather than waiting for a presence announcement.
The frame watch which covers the presence procedure (and most
frames for that matter) needs to support multicast frames for
presence to work. Doing this in frame-xchg seems like the right
choice but only ath9k supports multicast frame registration.
Because of this limited support DPP will register for these frames
manually.
Parses K (key), M (mac), C (class/channels), and V (version) tokens
into a new structure dpp_uri_info. H/I are not parsed since there
currently isn't any use for them.
This was caught by static analysis. As is common this should never
happen in the real world since the only way this can fail (apart from
extreme circumstances like OOM) is if the key size is incorrect, which
it will never be.
Static analysis flagged that 'path' was never being checked (which
should not ever be NULL) but during that review I noticed stat()
was being called, then fstat afterwards.
Recently systemd added the ability to pass secret credentials to
services via LoadCredentialEncrypted/SetCredentialEncrypted. Once
set up the service is able to read the decrypted credentials from
a file. The file path is found in the environment variable
CREDENTIALS_DIRECTORY + an identifier. The value of SystemdEncrypt
should be set to the systemd key ID used when the credential was
created.
When SystemdEncrypt is set IWD will attempt to read the decrypted
secret from systemd. If at any point this fails warnings will be
printed but IWD will continue normally. Its expected that any failures
will result in the inability to connect to any networks which have
previously encrypted the passphrase/PSK without re-entering
the passphrase manually. This could happen, for example, if the
systemd secret was changed.
Once the secret is read in it is set into storage to be used for
profile encryption/decryption.
Using storage_decrypt() hotspot can also support profile encyption.
The hotspot consortium name is used as the 'ssid' since this stays
consistent between hotspot networks for any profile.
Some users don't like the idea of storing network credentials in
plaintext on the file system. This patch implements an option to
encrypt such profiles using a secret key. The origin of the key can in
theory be anything, but would typically be provided by systemd via
'LoadEncryptedCredential' setting in the iwd unit file.
The encryption operates on the entire [Security] group as well as all
embedded groups. Once encrypted the [Security] group will be replaced
with two key/values:
EncryptedSalt - A random string of bytes used for the encryption
EncryptedSecurity - A string of bytes containing the encrypted
[Security] group, as well as all embedded groups.
After the profile has been encrypted these values should not be
modified. Note that any values added to [Security] after encryption
has no effect. Once the profile is encrypted there is no way to modify
[Security] without manually decrypting first, or just re-creating it
entirely which effectively treated a 'new' profile.
The encryption/decryption is done using AES-SIV with a salt value and
the network SSID as the IV.
Once a key is set any profiles opened will automatically be encrypted
and re-written to disk. Modules using network_storage_open will be
provided the decrypted profile, and will be unaware it was ever
encrypted in the first place. Similarly when network_storage_sync is
called the profile will by automatically encrypted and written to disk
without the caller needing to do anything special.
A few private storage.c helpers were added to serve several purposes:
storage_init/exit():
This sets/cleans up the encryption key direct from systemd then uses
extract and expand to create a new fixed length key to perform
encryption/decryption.
__storage_decrypt():
Low level API to decrypt an l_settings object using a previously set
key and the SSID/name for the network. This returns a 'changed' out
parameter signifying that the settings need to be encrypted and
re-written to disk. The purpose of exposing this is for a standalone
decryption tool which does not re-write any settings.
storage_decrypt():
Wrapper around __storage_decrypt() that handles re-writing a new
profile to disk. This was exposed in order to support hotspot profiles.
__storage_encrypt():
Encrypts an l_settings object and returns the full profile as data
This got merged without a few additional fixes, in particular an
over 80 character line and incorrect length check.
Fixes: d8116e8828 ("dpp-util: add dpp_point_from_asn1()")
When we detect a new phy being added, we schedule a filtered dump of
the newly detected WIPHY and associated INTERFACEs. This code path and
related processing of the dumps was mostly shared with the un-filtered
dump of all WIPHYs and INTERFACEs which is performed when iwd starts.
This normally worked fine as long as a single WIPHY was created at a
time. However, if multiphy new phys were detected in a short amount of
time, the logic would get confused and try to process phys that have not
been probed yet. This resulted in iwd trying to create devices or not
detecting devices properly.
Fix this by only processing the target WIPHY and related INTERFACEs
when the filtered dump is performed, and not any additional ones that
might still be pending.
While here, remove a misleading comment:
manager_wiphy_check_setup_done() would succeed only if iwd decided to
keep the default interfaces created by the kernel.
This debug print was before any checks which could bail out prior to
autoconnect starting. This was confusing because debug logs would
contain multiple "station_autoconnect_start()" prints making you think
autoconnect was started several times.
The periodic scan code was refactored to make normal scans and
periodic scans consistent by keeping both in the same queue. But
that change left out the abort path where periodic scans were not
actually removed from the queue.
This fixes a rare crash when a periodic scan has been triggered and
the device goes down. This path never removes the request from the
queue but still frees it. Then when the scan context is removed the
stale request is freed again.
0 0x4bb65b in scan_request_cancel src/scan.c:202
1 0x64313c in l_queue_clear ell/queue.c:107
2 0x643348 in l_queue_destroy ell/queue.c:82
3 0x4bbfb7 in scan_context_free src/scan.c:209
4 0x4c9a78 in scan_wdev_remove src/scan.c:2115
5 0x42fecd in netdev_free src/netdev.c:965
6 0x445827 in netdev_destroy src/netdev.c:6507
7 0x52beb9 in manager_config_notify src/manager.c:765
8 0x67084b in process_multicast ell/genl.c:1029
9 0x67084b in received_data ell/genl.c:1096
10 0x65e790 in io_callback ell/io.c:120
11 0x65aaae in l_main_iterate ell/main.c:478
12 0x65b213 in l_main_run ell/main.c:525
13 0x65b213 in l_main_run ell/main.c:507
14 0x65b72c in l_main_run_with_signal ell/main.c:647
15 0x4124e7 in main src/main.c:532
If netdev_connect_failed is called before netdev_get_oci_cb() the
netdev's handshake will be destroyed and ultimately crash when the
callback is called.
This patch moves the cancelation into netdev_connect_free rather than
netdev_free.
++++++++ backtrace ++++++++
0 0x7f4e1787d320 in /lib64/libc.so.6
1 0x42634c in handshake_state_set_chandef() at src/handshake.c:1057
2 0x40a11b in netdev_get_oci_cb() at src/netdev.c:2387
3 0x483d7b in process_unicast() at ell/genl.c:986
4 0x480d3c in io_callback() at ell/io.c:120
5 0x48004d in l_main_iterate() at ell/main.c:472 (discriminator 2)
6 0x4800fc in l_main_run() at ell/main.c:521
7 0x48032c in l_main_run_with_signal() at ell/main.c:649
8 0x403e95 in main() at src/main.c:532
9 0x7f4e17867b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
Commit 4d2176df29 ("handshake: Allow event handler to free handshake")
introduced a re-entrancy guard so that handshake_state objects that are
destroyed as a result of the event do not cause a crash. It rightly
used a temporary object to store the passed in handshake. Unfortunately
this caused variable shadowing which resulted in crashes fixed by commit
d22b174a73 ("handshake: use _hs directly in handshake_event").
However, since the temporary was no longer used, this fix itself caused
a crash:
#0 0x00005555f0ba8b3d in eapol_handle_ptk_1_of_4 (sm=sm@entry=0x5555f2b4a920, ek=0x5555f2b62588, ek@entry=0x16, unencrypted=unencrypted@entry=false) at src/eapol.c:1236
1236 handshake_event(sm->handshake,
(gdb) bt
#0 0x00005555f0ba8b3d in eapol_handle_ptk_1_of_4 (sm=sm@entry=0x5555f2b4a920, ek=0x5555f2b62588, ek@entry=0x16, unencrypted=unencrypted@entry=false) at src/eapol.c:1236
#1 0x00005555f0bab118 in eapol_key_handle (unencrypted=<optimized out>, frame=<optimized out>, sm=0x5555f2b4a920) at src/eapol.c:2343
#2 eapol_rx_packet (proto=<optimized out>, from=<optimized out>, frame=<optimized out>, unencrypted=<optimized out>, user_data=0x5555f2b4a920) at src/eapol.c:2665
#3 0x00005555f0bac497 in __eapol_rx_packet (ifindex=62, src=src@entry=0x5555f2b62574 "x\212 J\207\267", proto=proto@entry=34958, frame=frame@entry=0x5555f2b62588 "\002\003",
len=len@entry=121, noencrypt=noencrypt@entry=false) at src/eapol.c:3017
#4 0x00005555f0b8c617 in netdev_control_port_frame_event (netdev=0x5555f2b64450, msg=0x5555f2b62588) at src/netdev.c:5574
#5 netdev_unicast_notify (msg=msg@entry=0x5555f2b619a0, user_data=<optimized out>) at src/netdev.c:5613
#6 0x00007f60084c9a51 in dispatch_unicast_watches (msg=0x5555f2b619a0, id=<optimized out>, genl=0x5555f2b3fc80) at ell/genl.c:954
#7 process_unicast (nlmsg=0x7fff61abeac0, genl=0x5555f2b3fc80) at ell/genl.c:973
#8 received_data (io=<optimized out>, user_data=0x5555f2b3fc80) at ell/genl.c:1098
#9 0x00007f60084c61bd in io_callback (fd=<optimized out>, events=1, user_data=0x5555f2b3fd20) at ell/io.c:120
#10 0x00007f60084c536d in l_main_iterate (timeout=<optimized out>) at ell/main.c:478
#11 0x00007f60084c543e in l_main_run () at ell/main.c:525
#12 l_main_run () at ell/main.c:507
#13 0x00007f60084c5670 in l_main_run_with_signal (callback=callback@entry=0x5555f0b89150 <signal_handler>, user_data=user_data@entry=0x0) at ell/main.c:647
#14 0x00005555f0b886a4 in main (argc=<optimized out>, argv=<optimized out>) at src/main.c:532
This happens when the driver does not support rekeying, which causes iwd to
attempt a disconnect and re-connect. The disconnect action is
taken during the event callback and destroys the underlying eapol state
machine. Since a temporary isn't used, attempting to dereference
sm->handshake results in a crash.
Fix this by introducing a UNIQUE_ID macro which should prevent shadowing
and using a temporary variable as originally intended.
Fixes: d22b174a73 ("handshake: use _hs directly in handshake_event")
Fixes: 4d2176df29 ("handshake: Allow event handler to free handshake")
Reported-By: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Toke Høiland-Jørgensen <toke@toke.dk>
There is no need to punch the holes for netdev/wheel groups to send to
the .Agent interface. This is only done by the iwd daemon itself and
the policy for user 'root' already takes care of this.
A select few drivers send this instead of SIGNAL_MBM. The docs say this
value is the signal 'in unspecified units, scaled to 0..100'. The range
for SIGNAL_MBM is -10000..0 so this can be scaled to the MBM range easy
enough...
Now, this isn't exactly correct because this value ultimately gets
returned from GetOrderedNetworks() and is documented as 100 * dBm where
in reality its just a unit-less signal strength value. Its not ideal, but
this patch at least will fix BSS ranking for these few drivers.
The 'at_console' D-Bus policy setting has been deprecated for more then
10 years and could be ignored at any time in the future. Moreover, while
the intend was to allow locally logged on users to interact with iwd, it
didn't actually do that.
More info at https://www.spinics.net/lists/linux-bluetooth/msg75267.html
and https://gitlab.freedesktop.org/dbus/dbus/-/issues/52
Therefor remove the 'at_console' setting block.
On Debian (based) systems, there is a standard defined group which is
allowed to manage network interfaces, and that is the 'netdev' group.
So add a D-Bus setting block to grant the 'netdev' group that access.
Building on GCC 8 resulted in this compiler error.
src/sae.c:107:25: error: implicit declaration of function 'reallocarray';
did you mean 'realloc'? [-Werror=implicit-function-declaration]
sm->rejected_groups = reallocarray(NULL, 2, sizeof(uint16_t));
src/erp.c:134:10: error: comparison of integer expressions of different
signedness: 'unsigned int' and 'int' [-Werror=sign-compare]
src/eap-ttls.c:378:10: error: comparison of integer expressions of different signedness: 'uint32_t' {aka 'unsigned int'} and 'int' [-Werror=sign-compare]
Fixes the following crash:
#0 0x000211c4 in netdev_connect_event (msg=<optimized out>, netdev=0x2016940) at src/netdev.c:2915
#1 0x76f11220 in process_multicast (nlmsg=0x7e8acafc, group=<optimized out>, genl=<optimized out>) at ell/genl.c:1029
#2 received_data (io=<optimized out>, user_data=<optimized out>) at ell/genl.c:1096
#3 0x76f0da08 in io_callback (fd=<optimized out>, events=1, user_data=0x200a560) at ell/io.c:120
#4 0x76f0ca78 in l_main_iterate (timeout=<optimized out>) at ell/main.c:478
#5 0x76f0cb74 in l_main_run () at ell/main.c:525
#6 l_main_run () at ell/main.c:507
#7 0x76f0cdd4 in l_main_run_with_signal (callback=callback@entry=0x18c94 <signal_handler>, user_data=user_data@entry=0x0)
at ell/main.c:647
#8 0x00018178 in main (argc=<optimized out>, argv=<optimized out>) at src/main.c:532
This crash was introduced in commit:
4d2176df29 ("handshake: Allow event handler to free handshake")
The culprit seems to be that 'hs' is being used both in the caller and
in the macro. Since the macro defines a variable 'hs' in local block
scope, it overrides 'hs' from function scope. Yet (_hs) still evaluates
to 'hs' leading the local variable to be initialized with itself. Only
the 'handshake_event(hs, HANDSHAKE_EVENT_SETTING_KEYS))' is affected
since it is the only macro invocation that uses 'hs' from function
scope. Thus, the crash would only happen on hardware supporting handshake
offload (brcmfmac).
Fix this by removing the local scope variable declaration and evaluate
(_hs) instead.
Fixes: 4d2176df29 ("handshake: Allow event handler to free handshake")
- Ensure that input isn't an empty string
- Ensure that EINVAL errno (which could be optionally returned by
strto{ul|l} is also checked.
- Since strtoul allows '+' and '-' characters in input, ensure that
input which is expected to be an unsigned number doesn't start with
'-'
Given an ASN1 blob of the right form, parse and create
an l_ecc_point object. The form used is specific to DPP
hence why this isn't general purpose and put into dpp-util.
Like in ap.c, allow the event callback to mark the handshake state as
destroyed, without causing invalid accesses after the callback has
returned. In this case the crash was because try_handshake_complete
needed to access members of handshake_state after emitting the event,
as well as access the netdev, which also has been destroyed:
==257707== Invalid read of size 8
==257707== at 0x408C85: try_handshake_complete (netdev.c:1487)
==257707== by 0x408C85: try_handshake_complete (netdev.c:1480)
(...)
==257707== Address 0x4e187e8 is 856 bytes inside a block of size 872 free'd
==257707== at 0x484621F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==257707== by 0x437887: ap_stop_handshake (ap.c:151)
==257707== by 0x439793: ap_del_station (ap.c:316)
==257707== by 0x43EA92: ap_station_disconnect (ap.c:3411)
==257707== by 0x43EA92: ap_station_disconnect (ap.c:3399)
==257707== by 0x454276: p2p_group_event (p2p.c:1006)
==257707== by 0x439147: ap_event (ap.c:281)
==257707== by 0x4393AB: ap_new_rsna (ap.c:390)
==257707== by 0x4393AB: ap_handshake_event (ap.c:1010)
==257707== by 0x408C7F: try_handshake_complete (netdev.c:1485)
==257707== by 0x408C7F: try_handshake_complete (netdev.c:1480)
(...)
Previously we added logic to defer doing anything in ap_free() to after
the AP event handler has returned so that ap_event() has a chance to
inform whoever called it that the ap_state has been freed. But there's
also a chance that the event handler is destroying both the AP and the
netdev it runs on, so after the handler has returned we can't even use
netdev_get_wdev_id or netdev_get_ifindex. The easiest solution seems to
be to call ap_reset() in ap_free() even if we're within an event handler
to ensure we no longer need any external objects. Also make sure
ap_reset() can be called multiple times.
Another option would be to watch for NETDEV_WATCH_EVENT_DEL and remove
our reference to the netdev (because there's no need actually call
l_rtnl_ifaddr_delete or frame_watch_wdev_remove if the netdev was
destroyed -- frame_watch already tracks netdev removals), or to save
just the ifindex and the wdev id...
The purpose of this was to have a single utility to both cancel an
existing offchannel operation (if one exists) and start a new one.
The problem was the previous offchannel operation was being canceled
first which opened up the radio work queue to other items. This is
not desireable as, for example, a scan would end up breaking the
DPP protocol most likely.
Starting the new offchannel then canceling is the correct order of
operations but to do this required saving the new ID, canceling, then
setting offchannel_id to the new ID so dpp_presence_timeout wouldn't
overwrite the new ID to zero.
This also removes an explicit call to offchannel_cancel which is
already done by dpp_offchannel_start.
Several members are named based on initiator/responder (i/r)
terminology. Eventually both initiator and responder will be
supported so rename these members to use own/peer naming
instead.
ASN1 parsing will soon be required which will need some utilities in
asn1-private.h. To avoid duplication include this private header and
replace the OID's with the defined structures as well as remove the
duplicated macros.
station_set_scan_results takes an autoconnect flag which was being
set true in both regular/quick autoconnect scans. Since OWE networks
are processed after setting the scan results IWD could end up
connecting to a network before all the OWE hidden networks are
populated.
To fix this regular/quick autoconnect results will set the flag to
false, then process OWE networks, then start autoconnect. If any
OWE network scans are pending station_autoconnect_start will fail
but will pick back up after the hidden OWE scan.
scan_request_failed and scan_finished remove the finished scan_request
from the request queue right away, before calling the callback. This
breaks those clients that rely on scan_cancel working on such requests
(i.e. to force the destroy callback to be invoked synchronously, see
a0911ca778 ("station: Make sure roam_scan_id is always canceled").
Fix this by removing the scan_request from the request queue after
invoking the callback. Also provide a re-entrancy guard that will make
sure that the scan_request isn't removed in scan_cancel itself.
There are similar operations being performed but with different
callbacks and userdata, depending on whether 'sr' is NULL or not.
Optimize the function flow slightly to make if-else unnecessary.
While here, update the comment. periodic scans are now scheduled only
based on the periodic timeout timer.
If periodic scan is active and we receive a SCAN_ABORTED event, we would
still invoke the periodic scan callback with an error. This is rather
pointless since the periodic scan callback cannot do anything useful
with this information. Fix that.
We should never reach a point where NEW_SCAN_RESULTS or SCAN_ABORTED are
received before a corresponding TRIGGER_SCAN is received. Even if this
does happen, there's no harm from processing the commands anyway.
This makes it a little easier to book-keep the started variable. Since
scan_request already has a 'passive' bit-field, there should be no
storage penalty.
If scan_cancel is called on a scan_request that is 'finished' but with
the GET_SCAN command still in flight, it will trigger a crash as
follows:
Received Deauthentication event, reason: 2, from_ap: true
src/station.c:station_disconnect_event() 11
src/station.c:station_disassociated() 11
src/station.c:station_reset_connection_state() 11
src/station.c:station_roam_state_clear() 11
src/scan.c:scan_cancel() Trying to cancel scan id 6 for wdev 200000002
src/scan.c:scan_cancel() Scan is at the top of the queue, but not triggered
src/scan.c:get_scan_done() get_scan_done
Aborting (signal 11) [/home/denkenz/iwd-master/src/iwd]
++++++++ backtrace ++++++++
#0 0x7f9871aef3f0 in /lib64/libc.so.6
#1 0x41f470 in station_roam_scan_notify() at /home/denkenz/iwd-master/src/station.c:2285
#2 0x43936a in scan_finished() at /home/denkenz/iwd-master/src/scan.c:1709
#3 0x439495 in get_scan_done() at /home/denkenz/iwd-master/src/scan.c:1739
#4 0x4bdef5 in destroy_request() at /home/denkenz/iwd-master/ell/genl.c:676
#5 0x4c070b in l_genl_family_cancel() at /home/denkenz/iwd-master/ell/genl.c:1960
#6 0x437069 in scan_cancel() at /home/denkenz/iwd-master/src/scan.c:842
#7 0x41dc2e in station_roam_state_clear() at /home/denkenz/iwd-master/src/station.c:1594
#8 0x41dd2b in station_reset_connection_state() at /home/denkenz/iwd-master/src/station.c:1619
#9 0x41dea4 in station_disassociated() at /home/denkenz/iwd-master/src/station.c:1644
The happens because get_scan_done callback is still called as a result of
l_genl_cancel. Add a re-entrancy guard in the form of 'canceled'
variable in struct scan_request. If set, get_scan_done will skip invoking
scan_finished.
It isn't clear what 'l_queue_peek_head() == results->sr' check was trying
to accomplish. If GET_SCAN dump was scheduled, then it should be
reported. Drop it.
results->sr is set to NULL for 'opportunistic' scans which were
triggered externally. See scan_notify() for details. However,
get_scan_done would only invoke scan_finished (and thus the periodic
scan callback sc->sp.callback) only if the scan queue was empty. It
should do so in all cases.
The point type was being hard coded to 0x3 (BIT1) which may have resulted
in the peer subtracting Y from P when reading in the point (depending on
if Y was odd or not).
Instead set the compressed type to whatever avoids the subtraction which
both saves IWD from needing to do it, as well as the peer.
The intent of this check is to make sure that at least 2 bytes are
available for reading. However, the unintended consequence is that tags
with a zero length at the end of input would be rejected.
While here, rework the check to be more resistant to potential
overflow conditions.
The DPP spec says nothing about how to handle re-transmits but it
was found in testing this can happen relatively easily for a few
reasons.
If the configurator requests a channel switch but does not get onto
the new channel quick enough the enrollee may have already sent the
authenticate response and it was missed. Also by nature of how the
kernel goes offchannel there are moments in time between ROC when
the card is idle and not receiving any frames.
Only frames where there was no ACK will be retransmitted. If the
peer received the frame and dropped it resending the same frame wont
do any good.
