Certain module dependencies were missing, which could cause a crash on
exit under (very unlikely) circumstances.
#0 l_queue_peek_head (queue=<optimized out>) at ../iwd-1.28/ell/queue.c:241
#1 0x0000aaaab752f2a0 in wiphy_radio_work_done (wiphy=0xaaaac3a129a0, id=6)
at ../iwd-1.28/src/wiphy.c:2013
#2 0x0000aaaab7523f50 in netdev_connect_free (netdev=netdev@entry=0xaaaac3a13db0)
at ../iwd-1.28/src/netdev.c:765
#3 0x0000aaaab7526208 in netdev_free (data=0xaaaac3a13db0) at ../iwd-1.28/src/netdev.c:909
#4 0x0000aaaab75a3924 in l_queue_clear (queue=queue@entry=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:107
#5 0x0000aaaab75a3974 in l_queue_destroy (queue=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:82
#6 0x0000aaaab7522050 in netdev_exit () at ../iwd-1.28/src/netdev.c:6653
#7 0x0000aaaab7579bb0 in iwd_modules_exit () at ../iwd-1.28/src/module.c:181
In this particular case, wiphy module was de-initialized prior to the
netdev module:
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/wiphy.c:wiphy_free() Freeing wiphy phy0[0]
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/netdev.c:netdev_free() Freeing netdev wlan0[45]
This fixes a crash associated with toggling the iftype to AP mode
then calling GetDiagnostics. The diagnostic interface is never
cleaned up when netdev goes down so DBus calls can still be made
which ends up crashing since the AP interface objects are no longer
valid.
Running the following iwctl commands in a script (once or twice)
triggers this crash reliably:
iwctl device wlp2s0 set-property Mode ap
iwctl device wlp2s0 set-property Mode station
iwctl device wlp2s0 set-property Mode ap
iwctl ap wlp2s0 start myssid secret123
iwctl ap wlp2s0 show
++++++++ backtrace ++++++++
0 0x7f8f1a8fe320 in /lib64/libc.so.6
1 0x451f35 in ap_dbus_get_diagnostics() at src/ap.c:4043
2 0x4cdf5a in _dbus_object_tree_dispatch() at ell/dbus-service.c:1815
3 0x4bffc7 in message_read_handler() at ell/dbus.c:285
4 0x4b5d7b in io_callback() at ell/io.c:120
5 0x4b489b in l_main_iterate() at ell/main.c:476
6 0x4b49a6 in l_main_run() at ell/main.c:519
7 0x4b4cd9 in l_main_run_with_signal() at ell/main.c:645
8 0x404f5b in main() at src/main.c:600
9 0x7f8f1a8e8b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
About a month ago hostapd was changed to set the secure bit on
eapol frames during rekeys (bc36991791). The spec is ambiguous
about this and has conflicting info depending on the sections you
read (12.7.2 vs 12.7.6). According to the hostapd commit log TGme
is trying to clarify this and wants to set secure=1 in the case
of rekeys. Because of this, IWD is completely broken with rekeys
since its disallows secure=1 on PTK 1/4 and 2/4.
Now, a bool is passed to the verify functions which signifies if
the PTK has been negotiated already. If secure differs from this
the key frame is not verified.
The man pages (iwd.network) have a section about how to name provisioning
files containing non-alphanumeric characters but not everyone reads the
entire man page.
Warning them that the provisioning file was not read and pointing to
'man iwd.network' should lead someone in the right direction.
EAP-Success might come in with an identifier that is incremented by 1
from the last Response packet. Since identifier field is a byte, the
value might overflow (from 255 -> 0.) This overflow isn't handled
properly resulting in EAP-Success/Failure packets with a 0 identifier
due to overflow being erroneously ignored. Fix that.
Most users of storage_network_open don't log errors when the function
returns a NULL and fall back to defaults (empty l_settings).
storage_network_open() itself only logs errors if the flie is encrypted.
Now also log an error when l_settings_load_from_file() fails to help track
down potential syntax errors.
Drop the wrong negation in the error check. Check that there are no extra
characters after prefix length suffix. Reset errno 0 before the strtoul
call, as recommended by the manpage.
This is actually a false positive only because
p2p_device_validate_conn_wfd bails out if the IE is NULL which
avoids using wfd_data_length. But its subtle and without inspecting
the code it does seem like the length could be used uninitialized.
src/p2p.c:940:7: error: variable 'wfd_data_len' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (dev->conn_own_wfd)
^~~~~~~~~~~~~~~~~
src/p2p.c:946:8: note: uninitialized use occurs here
wfd_data_len))
^~~~~~~~~~~~
src/p2p.c:940:3: note: remove the 'if' if its condition is always true
if (dev->conn_own_wfd)
^~~~~~~~~~~~~~~~~~~~~~
src/p2p.c:906:23: note: initialize the variable 'wfd_data_len' to silence this warning
ssize_t wfd_data_len;
^
= 0
On musl-gcc the compiler is giving a warning for igtk_key_index
and gtk_key_index being used uninitialized. This isn't possible
since they are only used if gtk/igtk are non-NULL so pragma to
ignore the warning.
src/fils.c: In function 'fils_rx_associate':
src/fils.c:580:17: error: 'igtk_key_index' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
580 | handshake_state_install_igtk(fils->hs,
igtk_key_index,igtk + 6,
igtk_len - 6, igtk);
(same error for gtk_key_index)
For network configuration files the man pages (iwd.network) state
that [General].{AlwaysRandomizeAddress,AddressOverride} are only
used if main.conf has [General].AddressRandomization=network.
This actually was not being enforced and both iwd.network settings
were still taken into account regardless of what AddressRandomization
was set to (even disabled).
The handshake setup code now checks the AddressRandomization value
and if anything other than 'network' skips the randomization.
There were a few places in dpp/dpp-util which passed a single byte but
was being read in with va_arg(va, size_t). On some architectures this was
causing failures presumably from the compiler using an integer type
smaller than size_t. As we do elsewhere, cast to size_t to force the
compiler to pass a properly sized iteger to va_arg.
After one of the eap-tls-common-based methods succeeds keep the TLS
tunnel instance until the method is freed, rather than free it the
moment the method succeeds. This fixes repeated method runs where until
now each next run would attempt to create a new TLS tunnel instance
but would have no authentication data (CA certificate, client
certificate, private key and private key passphrase) since those are
were by the old l_tls object from the moment of the l_tls_set_auth_data()
call.
Use l_tls_reset() to reset the TLS state after method success, followed
by a new l_tls_start() when the reauthentication starts.
A user reported that IWD was failing to FT in some cases and this was
due to the AP setting the Retry bit in the frame type. This was
unexpected by IWD since it directly checks the frame type against
0x00b0 which does not account for any B8-B15 bits being set.
IWD doesn't need to verify the frame type field for a few reasons:
First mpdu_validate checks the management frame type, Second the kernel
checks prior to forwarding the event. Because of this the check was
removed completely.
Reported-By: Michael Johnson <mjohnson459@gmail.com>
station_signal_agent_notify() has been refactored so that its usage is
simpler. station_rssi_level_changed() has been replaced by an inlined
call to station_signal_agent_notify().
The call to netdev_rssi_level_init() in netdev_connect_common() is
currently a no-op, because netdev->connected has not yet been set at
this stage of the connection attempt. Because netdev_rssi_level_init()
is only used twice, it's been replaced by two inlined calls to
netdev_set_rssi_level_idx().
The SignalLevelAgent API is currently broken by the system bus's
security policy, which blocks iwd's outgoing method call messages. This
patch punches a hole for method calls on the
net.connman.iwd.SignalLevelAgent interface.
There may be situations where DNS information should not be set (for
example in auto-tests where the resolver daemon is not running) or if a
user wishes to ignore DNS information obtained.
Allows granularly specifying the DHCP logging level. This allows the
user to tailor the output to what they need. By default, always display
info, errors and warnings to match the rest of iwd.
Setting `IWD_DHCP_DEBUG` to "debug", "info", "warn", "error" will limit
the logging to that level or higher allowing the default logging
verbosity to be reduced.
Setting `IWD_DHCP_DEBUG` to "1" as per the current behavior will
continue to enable debug level logging.
After the initial handshake, once the TK has been installed, all frames
coming to the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to various attacks.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAPoL frames
received after the initial handshake has been completed.
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAP-Failure frame generated by
an adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAP frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAPoL 1/4 frame generated by an
adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted PTK 1/4 frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Do not fail an ongoing handshake when an invalid EAPoL frame is
received. Instead, follow the intent of 802.11-2020 section 12.7.2:
"EAPOL-Key frames containing invalid field values shall be silently
discarded."
This prevents a denial-of-service attack where receipt of an invalid,
unencrypted EAPoL 1/4 frame generated by an adversary results in iwd
terminating an ongoing connection.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Periodic scan requests are meant to be performed with a lower priority
than normal scan requests. They're thus given a different priority when
inserting them into the wiphy work queue. Unfortunately, the priority
is not taken into account when they are inserted into the
sr->requests queue. This can result in the scanning code being confused
since it assumes the top of the queue is always the next scheduled or
currently ongoing scan. As a result any further wiphy_work might never be
started properly.
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 3
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_timeout() 1
Apr 27 16:34:40 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 4
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_insert() Inserting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_done() Work item 3 done
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/wiphy.c:wiphy_radio_work_next() Starting work item 5
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_notify() Scan notification Trigger Scan(33)
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_request_triggered() Passive scan triggered for wdev 1
Apr 27 16:34:43 iwd[5117]: ../iwd-1.26/src/scan.c:scan_periodic_triggered() Periodic scan triggered for wdev 1
In the above log, scan request 5 (triggered by dbus) is started before
scan request 4 (periodic scan). Yet the scanning code thinks scan
request 4 was triggered.
Fix this by using the wiphy_work priority to sort the sr->requests queue
so that the scans are ordered in the same manner.
Reported-by: Alvin Šipraga <ALSI@bang-olufsen.dk>
The upstream code immediately retransmitted any no-ACK frames.
This would work in cases where the peer wasn't actively switching
channels (e.g. the ACK was simply lost) but caused unintended
behavior in the case of a channel switch when the peer was not
listening.
If either IWD or the peer needed to switch channels based on the
authenticate request the response may end up not getting ACKed
because the peer is idle, or in the middle of the hardware changing
channels. IWD would get no-ACK and immediately send the frame again
and most likely the same behavior would result. This would very
quickly increment frame_retry past the maximum and DPP would fail.
Instead when no ACK is received wait 1 second before sending out
the next frame. This can re-use the existing frame_pending buffer
and the same logic for re-transmitting.
There is a potential corner case of an offchannel frame callback
being called after ROC has ended.
This could happen in theory if a received frame is queued right as
the ROC session expires. If the ROC cancel event makes it to user
space before the frame IWD will schedule another ROC then receive
the frame. This doesn't prevent IWD from sending out another
frame since OFFCHANNEL_TX_OK is used, but it will prevent IWD from
receiving a response frame since no dwell duration is used with DPP.
To handle this an roc_started bool was added to the dpp_sm which
tracks the ROC state. If dpp_send_frame is called when roc_started
is false the frame will be saved and sent out once the ROC session
is started again.
ConnectHiddenNetwork creates a temporary network object and initiates a
connection with it. If the connection fails (due to an incorrect
passphrase or other reasons), then this temporary object is destroyed.
Delay its destruction until network_disconnected() since
network_connect_failed is called too early. Also, re-order the sequence
in station_reset_connection_state() in order to avoid using the network
object after it has been freed by network_disconnected().
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
station_hide_network will remove and free the network object, so calling
network_close_settings will result in a crash. Make sure this is done
prior to network object's destruction.
Fixes: 85d9d6461f ("network: Hide hidden networks on connection error")
If a user connection fails on a freshly scanned psk or open hidden
network, during passphrase request or after, it shall be removed from
the network list. Otherwise, it would be possible to directly connect
to that known network, which will appear as not hidden.
p2p_peer_update_existing may be called with a scan_bss struct built from
a Probe Request frame so it can't access bss->p2p_probe_resp_info even
if peer->bss was built from a Probe Response. Check the source frame
type of the scan_bss struct before updating the Device Address.
This fixes one timing issue that would make the autotest fail often.
Since l_malloc is used the frame contents are not zero'ed automatically
which could result in random bytes being present in the frame which were
expected to be zero. This poses a problem when calculating the MIC as the
crypto operations are done on the entire frame with the expectation of
the MIC being zero.
Fixes: 83212f9b23 ("eapol: change eapol_create_common to support FILS")
explicit_bzero is used in src/storage.c since commit
01cd858760 but src/missing.h is not
included, as a result build with uclibc fails on:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init':
storage.c:(.text+0x13a4): undefined reference to `explicit_bzero'
Fixes:
- http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1
This is used to hold the current BSS frequency which will be
used after IWD receives a presence announcement. Since this was
not being set, the logic was always thinking there was a channel
mismatch (0 != current_freq) and attempting to go offchannel to
'0' which resulted in -EINVAL, and ultimately protocol termination.
