Some elements, though unlikely, are not required to be included
with the GET_STATION call that GetDiagnostics relies on. mac80211
based drivers include most of these, but other drivers may not.
To be on the safe side all properties except ConnectedBss are now
optional and may not be included.
This adds a generalized API for GET_STATION. This API handles
calling and parsing the results into a new structure,
netdev_station_info. This results structure will hold any
data needed by consumers of netdev_get_station. A helper API
(netdev_get_current_station) was added as a convenience which
automatically passes handshake->aa as the MAC.
For now only the RSSI is parsed as this is already being
done for RSSI polling/events. Looking further more info will
be added such as rx/tx rates and estimated throughput.
Arrays of dictionaries are quite common, and for basic
types this API makes things much more convenient by
putting all the enter/append/leave calls in one place.
Retrieve the dependencies of readline through pkg-config (and fallback
to -lreadline) to avoid the following build failure:
/nvme/rc-buildroot-test/scripts/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: /nvme/rc-buildroot-test/scripts/instance-0/output-1/host/bin/../x86_64-buildroot-linux-uclibc/sysroot/usr/lib/libreadline.a(display.o): in function `cr':
display.c:(.text+0x1ab): undefined reference to `tputs'
Fixes:
- http://autobuild.buildroot.org/results/8fb1341f2f5094c346456b43b4fc04996c2e1485
Add a parameter to station_set_scan_results to allow skipping the
removal of old BSSes. In the DBus-triggered scan only expire BSSes
after having gone through the full supported frequency set.
It should be safe to pass partial scan results to
station_set_scan_results() when not expiring BSSes so using this new
parameter I guess we could also call it for roam scan results.
A scan normally takes about 2 seconds on my dual-band wifi adapter when
connected. The drivers will normally probe on each supported channel in
some unspecified order and will have new partial results after each step
but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full
scan request finishes, and for segmented scans we will wait for all
segments to finish before calling back from scan_active() or
scan_passive().
To improve user experience define our own channel order favouring the
2.4 channels 1, 6 and 11 and probe those as an individual scan request
so we can update most our DBus org.connman.iwd.Network objects more
quickly, before continuing with 5GHz band channels, updating DBus
objects again and finally the other 2.4GHz band channels.
The overall DBus-triggered scan on my wifi adapter takes about the same
time but my measurements were not very strict, and were not very
consistent with and without this change. With the change most Network
objects are updated after about 200ms though, meaning that I get most
of the network updates in the nm-applet UI 200ms from opening the
network list. The 5GHz band channels take another 1 to 1.5s to scan and
remaining 2.4GHz band channels another ~300ms.
Hopefully this is similar when using other drivers although I can easily
imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using
two radios, or uses 2, 4 or another number of dual-band radios to probe
2, 4, ... channels simultanously. We'd then lose some of the
performance benefit. The faster scan results may be worth the longer
overall scan time anyway.
I'm also assuming that the wiphy's supported frequency list is exactly
what was scanned when we passed no frequency list to
NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some
frequency that shouldn't have been scanned.
Use the hwsim DBus API rather than command line. This both is
faster and more dynamic than doing so with the command line.
This also avoids tracking the radio ID since we can just hang
on to the radio Dbus object directly.
The Create() API was limited to only taking a Name and boolean
(for p2p enabling). The actual hwsim nl80211 API can take more
attributes than this (which are actually utilized when creating
from the command line). To get the DBus API up to the same
functionality the two arguments in Create were replaced with
a single dictionary. This allows for extending later if more
arguments are needed.
In the NEW_RADIO callback hwsim was assuming that DBus had no
yet replied to the Create() method. In some cases the NEW_RADIO
event fires before the actual callback which will respond to
DBus. This causes a crash in the create callback.
Starts hwsim but does not register to mac80211_hwsim. This is to
allow autotests to disable hwsim, while still having the ability
to create/destroy radios over DBus.
Readline uses the characters \001 and \002 to mark the start and end
of zero-length character sequnces in the prompt before prompt
expansion. Without these characters the input point can become offset
from the visual end of the prompt when performing some actions.
Tests netconfig with a static configuration, as well as tests ACD
functionality.
The test has two IWD radios which will eventually use the same IP.
One is configured statically, one will receive the IP via DHCP.
The static client sets its IP first and begins using it. Then the
DHCP client is started. Since ACD in a DHCP client is configured
to use its address indefinitely, the static client *should* give
up its address.
When the IP is configured to be static we can now use ACD in
order to check that the IP is available and not already in
use. If a conflict is found netconfig will be reset and no IP
will be set on the interface. The ACD client is left with
the default 'defend once' policy, and probes are not turned
off. This will increase connection time, but for static IP's
it is the best approach.
For better reliability the processor count is now set to qemu.
In cases of low CPU count (< 2) hosts the processor count is
limited to 1. Otherwise half of the host cores will be used for
the VM.
Certain classes were still using the default namespace. This
didn't matter yet since testAP was the only test using namespaces,
and the AP interface was the only one being used.
For an IWD station on a separate namespace all objects need to
be accessable, so the namespace is passed along to those as needed.
Allow the storage directory (default /tmp/iwd) to be configured
just like the state directory. This is in order to support multiple
IWD instances which require separate storage directories for network
provisioning files.
The docs just specified what a IP prefix looks like, not an
actual example. Though its not recommended to just copy paste
blindly, its still useful to have some value in the man pages
that actually works if someone just wants to get a DHCP server
working.
In the strange case that the dns list or the domain list are empty and
openresolv is being used, delete the openresolv entry instance instead
of trying to set it to an empty value
Make sure to erase the network_info of a known network that has been
removed before disconnecting any stations connected to it. This fixes
the following warning observed when forgetting a connected network:
WARNING: ../git/src/network.c:network_rank_update() condition n < 0 failed
This also fixes a bug where such a forgotten network would incorrectly
appear as the first element in the response to GetOrderedNetworks(). By
clearing the network_info, network_rank_update() properly negates the
rank of the now-unknown network.
Due to timing this test sometimes does not pass because it was
just asserting on the device state rather than waiting for a
change. This generally worked but not always.
==5279== 104 bytes in 2 blocks are definitely lost in loss record 1 of 1
==5279== at 0x4C2F0CF: malloc (vg_replace_malloc.c:299)
==5279== by 0x4655CD: l_malloc (util.c:61)
==5279== by 0x47116B: l_rtnl_address_new (rtnl.c:136)
==5279== by 0x438F4B: netconfig_get_dhcp4_address (netconfig.c:429)
==5279== by 0x438F4B: netconfig_ipv4_dhcp_event_handler
(netconfig.c:735)
==5279== by 0x491C77: dhcp_client_event_notify (dhcp.c:332)
==5279== by 0x491C77: dhcp_client_rx_message (dhcp.c:810)
==5279== by 0x492A88: _dhcp_default_transport_read_handler
(dhcp-transport.c:151)
==5279== by 0x46BECB: io_callback (io.c:118)
==5279== by 0x46B10C: l_main_iterate (main.c:477)
==5279== by 0x46B1DB: l_main_run (main.c:524)
==5279== by 0x46B3EA: l_main_run_with_signal (main.c:646)
==5279== by 0x403ECE: main (main.c:490)
Fix the AlwaysRandomizeAddress setting name.
Add the stricter specification of the extension syntax.
Clarify that GTC and MD5 can't be used as outer EAP methods with wifi.
Tracking of addresses that weren't set by us seemed a bit questionable.
Take this out for now. If this is ever needed, then a queue with
l_rtnl_address objects should be used.
Introduce a new v4_address member which will hold the currently
configured IPV4 address (static or obtained via DHCP). Use the new
l_rtnl_address class for this.
As a side-effect, lease expiration will now properly remove the
configured address.
This patch converts the code to use the new l_rtnl_address class. The
settings parsing code will now return an l_rtnl_address object which
can be installed directly.
Also, address removal path for static addresses has been removed, since
netconfig_reset() sets disable_ipv6 setting to '1', which will remove
all IPV6 addresses for the interface.
This patch converts the code to use the new l_rtnl_route class instead
of using l_rtnl_route6* utilities. The settings parsing code will now
return an l_rtnl_route object which can be installed directly.
Also, the route removal path has been removed since netconfig_reset()
sets disable_ipv6 setting to '1' which will remove all IPV6 routes and
addresses for the interface.
