Two new hardware configuration keys were added:
[radX]
iftype_disable=station,ap,adhoc,p2p_client,p2p_go,mesh_point
cipher_disable=wep40,wep104,tkip,ccmp,bip
Any of the above values are supported and can be disabled.
Support is coming to configure radios with a specific set of interface
type and cipher support, so the input to create_hwsim_radio is better
suited to use a parameter structure rather than adding more parameters.
The radio_confs key was parsed in a way that required all radios
to be specified in the list. This isnt optimal, as you may want to
specially configure a certain radio, while keeping all the others
default.
This change reworks some logic and allows any radio to be specially
configured on its own.
mac80211_hwsim now allows setting supported iftypes/ciphers. This patch
enables this support in hwsim. Specific iftypes/ciphers can now be
disabled via the command line when creating a radio:
Disable iftypes:
--iftype-disable station,ap,adhoc,p2p_client,p2p_go,mesh_point
Disable cipher types:
--cipher-disable ccmp,tkip,wep
The test should be aborted if there are not enough radios that support
AP mode. The iftype attribute will now be parsed during the wiphy dump
and a flag is set on the wiphy so we know to skip this radio when
creating the hostapd instances. Since hostapd gets started first, it
will automatically choose all the radios it needs which support AP mode.
This leaves the remainder of the radios (potentially STA only) for IWD.
In the PCI/USB passthrough changes the wiphy ID was changed to be an
unsigned integer, where id zero corresponded to an error when in native
hardware mode. Along with this, the radio ID for hwsim was changed to a
pre-increment (only in test-runner), so the radio IDs would start at 1.
The repercussions were not fully investigated, but if they were it would
have been seen that hwsim creates radios IDs starting at zero. This left
test-runner and hwsim with unsynchronized radio IDs, and radio zero
never got deleted after each test causing each successive test to
discover old radio IDs.
-nodefconfig doesn't exist anymore and according to the docs it either
had the same meaning or was implied by -no-user-config so it wouldn't be
needed anyway. -balloon doesn't exist anymore and according to
https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg06985.html
"-balloon none" was a nop, but I suspect -nodefaults may have already
had the effect of disabling creation of the virtio-balloon device.
This patch allows the host machine to pass through its PCI/USB network
cards into the test-runner virtual machine. By doing this we can run
nearly all the same autotests using physical/real wireless hardware.
First off, utilizing this feature requires a properly configured host
machine. There are kernel boot parameters and config files that need to
be configured before any of this will work. Unfortunately there is no
way around this, and hence this feature is not particularly aimed for
"the masses", but rather for specially configured test machines.
A new configuration file was introduced (tools/hw.conf) which is just an
example, it should be edited to work with the host machine using it. This
file merely holds the PCI addresses/USB bus of the devices you wish to pass
through to qemu.
Passing in this hardware config file with --hw <file> tells test-runner
that you are attempting to use this new feature. The tests themselves
do not need to change, its the initial test setup that required some
changes.
Since we are no longer creating radios we must discover the radios that
are present (once in the VM). This is done using borrowed code from IWD
to dump wiphys and interfaces. As the wiphys/interfaces are dumped, we
build up the wiphy list. In the hwsim case we still build this list up
when we create the radios, which hasn't changed. This does lead us to
have some special cleaup, where in the native case we just 'reset' the
list into its state pre-test (removing any hostapd flags). And as before
with the hwsim case we fully destroy and free the wiphy list, since a
new list will be created on the next test (along with new radios).
There should not need to be any changes to the tests themselves, but
potentially to some hw.conf files. A new key was introduced, 'needs_hwsim'
which need to be set on any tests that require the hwsim dbus API. This
tells test-runner to skip this test, otherwise it would fail in native
mode.
One last minor detail; the wiphy->id was changed to an unsigned int. This
is to match the type the kernel uses when dumping wiphys. Because of
this '0' is now the error case for both hwsim and native mode rather than
-1. Error checks were updated accordingly.
Move the interface creation code from configure_hw_radios to
configure_hostapd_instaces so as not to create unneeded interfaces on
the wiphys that IWD is going to manage. We pass a wiphy whitelist to
IWD later and IWD now creates the interfaces it needs on those managed
wiphys. Change TEST_WIPHY_LIST format to only include the interface
name for the wiphys used by hostapd.
Note that we still remove interfaces just before removing the hwsim
radios on exit, it seems like there's no point removing the interfaces
in that case.
Drop a pointless asignment of has_hw_conf to false when it's already
false, fix index when accessing radio_conf_list. Apparently the SETUP
group is not used in any of our test and wasn't tested itself so could
as well have removed the code.
The option may be present but may not parse correctly as a list in which
case has_hw_conf will be true but radio_conf_list will be NULL and we
might crash.
HT/VHT require setting the regulatory domain to something other
than 00. This adds an option to the hardware config which allows
the regulatory domain to be set to any country.
HT/VHT require channels who's use is restricted depending on
country. When using these channels, cfg80211 tries to load the
regulatory.db file in /lib/firmware and verify the signature.
This poses a problem as the host machine may not have a signed
regulatory.db, or it may have not been signed with the expected
signature which would cause cfg80211 to fail to load the database.
If cfg80211 fails to load the database the country will be set to
00, which is the most restrictive "world roaming" setting. This
does not allow HT/VHT to work properly.
In the context of test-runner we can simply disable the verification.
Unforunately this is not a very common practice, so CONFIG_EXPERT
must be enabled.
If your system does not have /lib/firmware/regulatory.db you must
get it. More info can be found here:
https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
When using --valgrind, you must also use --verbose iwd, and, depending
on the tests you may also need to include pytests in the verbose flag.
Since anyone using --valgrind definitely wants to see valgrind info
printed they should not need to enable verbose printing. Also, manually
parsing valgrind prints with IWD prints mixed throughout is a nightmare
even for a single test.
This patch uses valgrind's --log-file flag, which is directed to
/tmp/valgrind.log. After the tests runs we can print out this file.
If ofono/phonesim is not found on the system, any test requiring those will
be skipped. In this case we would still try and remove symlinks that were
never created. An error would be printed, but the actual source tree files
were getting removed. This adds a new goto label where we can skip the tmpfs
removal in this error case.
-v dbus may help debug find client authentication problems but if
everything is ok it will not print any messages. -v dbus-monitor starts
the dbus-monitor.
Since we don't catch all hwsim attribute types in unicast_handler
you see tons of "Unknown attribute type: X" prints. Since this is
not an error, we should only print if the attribute does not exist
in the attribute list.
CONFIG_DRIVER_NL80211 isn't an option for the kernel. Maybe it was
mistakenly added based on the hostap configuration instructions in
doc/test-runner.txt
If the intent was to add CONFIG_CFG80211 and CONFIG_MAC80211, they're
already in the relevant kernel defconfigs.
Kernel command line arguments were not being parsed properly, $PATH in
particular was completely screwed up and causing commands in user's
$PATH to fail
In mac80211_hwsim each radio is assigned two addresses, the second (addr
1) being used over nl80211. In SendFrame we'd hardcode the mapping of
address 0 to address 1 even though we track all the addresses in radio_info,
so instead use that data to find the radio that has given address 0. Also
if no address 0 matches what was supplied over DBus try to find a matching
address 1.
There are ways userspace can request different addresses when managing
mac80211_hwsim radios and the hardcoded mapping would become wrong.
There's a new "-Werror=format-overflow" warning in gcc 8 that detects
potential overflow or truncation with sprintf/snprintf, so the
test-runner build fails with gcc 8. Using l_strdup_printf allows the
build to succeed, and moves a few large buffers from the stack to the
heap.
If the hw.conf option 'start_iwd' is false, then iwd is started
inside the python test, which means it will not know if the
--valgrind option was passed to test runner. If this is the case
an environment variable is set so the python test knows the
option is being used.
Without this subsequent tests may be affected by hwsim not being
restarted.
Additionally in 4.13 the kernel will not use the registered hwsim
wmedium for wiphys created after the HWSIM_CMD_REGISTER call and
there's no way to re-register it without disconnecting from netlink
which is a bit of work. It's a one line fix in 4.13, I've not yet
checked if this has changed in current git.
