You can now specify a limited list of subtests to run out of a
full auto-test using --sub-tests,-S. This option is limited in
that it is only meant to be used with a single autotest (since
it doesn't make much sense otherwise).
The subtest can be specified both with or without the file
extension.
Example usage:
./test-runner -A testAP -S failure_test,dhcp_test.py
This will only run the two subtests and exclude any other *.py
tests present in the test directory.
Code was added with commit 04487f575b which passes a radio object
to the Interface class constructor and stores it in the Interface
object. The radio class also stores each Interface object which
creates a circular reference and causes the Radio to stick around
long after the tests finishes.
I cannot see why the Interface needs to keep track of the Radio
object. None of the wpa_supplicant utilities use this so it has
been removed.
Add support for a WPA_SUPPLICANT section in hw.conf where
'radN=<config_path>' lines will only reserve radios and create
interfaces for the autotest to be able to start wpa_supplicant on them,
i.e. this prevents iwd or hostapd from being started on them but doesn't
start a wpa_supplicant instance by itself.
The host systems configuration directories for IWD/EAD were
being mounted in the virtual machine. This required that the
host create these directories before hand. Instead we can
just set up the system and IWD/EAD to use directories in /tmp
that we create when we start the VM. This avoids the need for
any host configuration.
Allow the "hwsim_medium=no" setting in hw.conf's SETUP section to
disable starting hwsim. It looks like the packets going through
userspace add enough latency that active scans don't work, probe
responses don't arrive within the "dwell time" or probe requests are not
ACKed on time. I've tried modifying tools/hwsim.c to respond with the
HWSIM_CMD_TX_INFO_FRAME cmd as the first thing after receiving a
HWSIM_CMD_FRAME and even skipping the queue in ell/genl.c by writing the
command synchronously, but neither helped enough to make the scans work.
This does not rule out that hwsim or the way our scans are done can be
fixed and that would obviously be better than what I did in this patch.
This extends test-runner to also use iwmon if --log is enabled.
For this case the iwmon log will be found inside each test
log directory.
A new option, --monitor <file> was added in case full logging isn't
desired (potentially for timing issues) but a iwmon log is needed.
Be aware that when --monitor is used test-runner will mount the
entire parent directory. test-runner itself will only write to the
file specified, but just know that the parent directory is available
as read-write inside the VM.
--log takes precedence over --monitor, meaning the iwmon log will
be written to <logdir>/<test>/iwmon instead of the file specified
with --monitor if both options are provided.
The virtual environment changed slightly adding two network adatpers
which are connected to the same backend so they can communicate with
each other (basically connected to a switch). The hostapd command
line was modified to allow no interfaces to be passed in which lets
us create zero radios but still specify a radius_config file.
This is just a more concise/pythonic way of doing function arguments.
Since Process/start_process have basically the same argument names
we can simplify and use **kwargs which will pass the named arguments
directly to Process(). This also allows us to add arguments to Process
without touching start_process if we need.
Slower systems may not be able to make some timeouts that tests
mandated. All timeouts were increased significantly to allow tests
to pass on slow systems.
Removed test-runner.c, and renamed py_runner to test-runner. Removed
tools/test-runner from .gitignore.
This was done as a separate commit to avoid a nasty diff between the
existing test runner, and the new python version
This patch completely re-writes test-runner in Python. This was done
because the existing C test-runner had some clunky work arounds and
maintaining or adding new features was starting to become a huge pain.
There were a few aspects of test-runner which continually had to
be dealt with when adding any new functionality:
* Argument parsing: Adding new arguments to test-runner wasn't so
bad, but if you wanted those arguments passed into the VM it
became a huge pain. Arguments needed to be parsed, then re-formatted
into the qemu command line, then re-parsed in a special order
(backwards) once in the VM. The burden for adding new arguments was
quite high so it was avoided (at least by me) at all costs.
* The separation between C and Python: The tests are all written in
python, but the executables, radios, and interfaces were all created
from C. The way we solved this was by encoding the require info as
environment variables, then parsing those from Python. It worked,
but it was, again, a huge pain.
* Process management: It started with all processes being launched
from C, but eventually tests required the ability to start IWD, or
kill hostapd ungracefully in order to test certain functionality.
Since the processes were tracked in C, Python had no way of
signalling that it killed a process and when it started one C had
no idea. This was mitigated (basically by killall), but it was
no where close to an elegant solution.
Re-writing test-runner in python solves all these problems and will
be much easier to maintain.
* Argument parsing: Now all arguments are forwarded automatically
to the VM. The ArgParse library takes care of parsing and each
argument is stored in a dictionary.
* Separation between C and Python: No more C, so no more separation.
* Process management: Python will now manage all processes. This
allows a test to kill, restart, or start a new process and not
have to remember the PID or to kill it after the test.
There are a few more important aspects of the python implementation
that should now be considered when writing new tests:
* The IWD constructor now has different default arugments. IWD
will always be started unless specified and the configuration
directory will always be /tmp
* Any non *.py file in the test directory will be copied to /tmp.
This avoids the need for 'tmpfs_extra_stuff' completely.
* ctrl_interface will automatically be appended to every hostapd
config. There is no need to include this in a config file from
now on.
* Test cleanup is extremely important. All tests get run in the
same interpreter now and the tests themselves are actually loaded
as python modules. This means e.g. if you somehow kept a reference
to IWD() any subsequent tests would not start since IWD is still
running.
* For debugging, the test context can be printed which shows running
processes, radios, and interfaces.
Three non-native python modules were used: PrettyTable, colored, and
pyroute2
$ pip3 install prettytable
$ pip3 install termcolor
$ pip3 install pyroute2
Besides being undefined behaviour, signed integer overflow can cause
unexpected comparison results. In the case of network_rank_compare(),
a connected network with rank INT_MAX would cause newly inserted
networks with negative rank to be inserted earlier in the ordered
network list. This is reflected in the GetOrderedMethods() DBus method
as can be seen in the following iwctl output:
[iwd]# station wlan0 get-networks
Network name Security Signal
----------------------------------------------------
BEOLAN 8021x **** }
BeoBlue psk *** } all unknown,
UI_Test_Network psk *** } hence assigned
deneb_2G psk *** } negative rank
BEOGUEST open **** }
> titan psk ****
Linksys05274_5GHz_dmt psk ****
Lyngby-4G-4 5GHz psk ****
If an application has a bug and hangs on SIGTERM this causes
test-runner to hang as well. This is obviously an issue with
the application in question, but test-runner should have a way
of continuing onto the next test rather than hanging.
Instead we can use WNOHANG and a sleep to allow applications
some amount of time to exit, and if they haven't use SIGKILL
instead as well as print an error. Similar to how
wait_for_socket works. The timeout is hard coded to 2 seconds
(100ms sleep + 20 iterations).
Previously iwmon was running per-test, which would jumble any subtests
together into the same log file making it hard to parse. Now create
a separate directory for each subtest and put the monitor log and
pcap there.
Using mac80211_hwsim can sometimes result in out of order messages
coming from the kernel. Since mac80211_hwsim immediately sends out
frames and the kernel keeps command responses in a separate queue,
bad scheduling can result in these messages being out of order.
In some cases we receive Auth/Assoc frames before the response to
our original CMD_CONNECT. This causes autotests to fail randomly,
some more often than others.
To fix this we can introduce a small delay into hwsim. Just a 1ms
delay makes the random failures disappear in the tests. This delay
is also makes hwsim more realistic since actual hardware will always
introduce some kind of delay when sending or receiving frames.
When running test-runner as non-root the environment variables
SUDO_GID/SUDO_UID were unset, causing atoi to segfault. This replaces
atoi with strtol, and checks the existance of SUDO_GID/SUDO_UID
before trying to turn it into an integer. This patch also allows
the uid/gid to be read from the user if running as non-root.
Note: running as non-root does require the users permissions to be
setup properly. Directories and files are created when running with
logging, so if the user running test-runner does not have these
permissions the creation of these files will fail.
The configuration value of iwd_config_dir was defaulting to /etc/iwd
which, in the context of test-runner, is probably not the best idea.
The system may have a main.conf file in /etc/iwd which could cause
tests to fail or behave unexpectedly.
In addition all tests which use iwd_config_dir set it to /tmp anyways.
Because of this, the new default value will be /tmp and no tests will
even need to bother setting this.
The configuration value itself is not being removed because it may be
useful to set arbitrary paths (e.g. /etc/iwd) for example when using
the shell functionality.
This key is special in hostapd, and was being treated as a normal hostapd
config file. This special radius config file needs to be kept unpaired from
any interfaces so now its passed in as a separate argument and appended to
the end of the hostapd execute command.
Tests which use a standalone RADIUS server may crash due to
the wiphy array not taking into account the 'radius_server'
key which is skipped during setup.
The goto was jumping to a label which freed the wiphy list which
had not yet been initialized. This also fixes another similar issue
if chdir fails (in this case tmpfs_extra_stuff would get freed
before being allocated).
Some test cases require (at least with recent hostapd versions) a
stand alone radius server. This is done using driver=none in the
hostapd config file. For this use case hostapd does not need any
radio since its not doing anything wireless related.
Now inside the hw.conf file, under the HOSTAPD group, you can
specify a config file as the value to 'radius_server' key. This
config file will be used without any associated radio when hostapd
is started.
These two processes are executed per-test so they can be passed the
test name and have the logs stored only in tests that actually need
them rather than at the top level.
After changing the valgrind log to --log-fd, it appears that
the log file just gets appended, where before it was overwritten.
This makes test print out all previous tests valgrind results.
Now after printing out the valgrind info we can erase the file
for the next test.
This was a mistake in the original implementation. Since test-runner
is always run from the tools directory using --log with no directory
specified would result in many log files being put into the iwd tree.
Instead we can make --log take a required argument so its more
obvious where all the logs are going to go.
localtime indexes month starting at zero so adding 1 gives us a folder
name with the correct month.
The year is also set as 'years since 1900', so we need to add 1900 to
the year to get the actual year.
Historically if you wanted to see output from a python test you needed
to specify -v pytests. This was also the case if IWD was started from
python.
Nearly every time I run test-runner I would specify "-v iwd,pytests"
only to get the IWD output on these specific tests.
Instead we can special case 'python3' (previously 'pytests') inside
execute_program so that turning on verbosity for 'iwd' also turns it
on for the python tests.
After the logging changes verbose IWD with valgrind did not show any IWD
output. This commit fixes this by checking the verbosity against log_name
rather than argv[0] since log_name has a special case for valgrind/iwd.
The valgrind logic in start_iwd was refactored to only use the --log-fd
option rather than using --log-file in addition to --log-fd.
All the processes verbose output is just written to stdout, and very
hard to parse after the test runs. Having test-runner write the
processes output to separate log files is much nicer to view after
the test runs.
A read/write file system is created which is separate and isolated
from the current FS mount (which mounts the whole host file system).
Doing this requires the user to create a folder somewhere to be used
as the mount point. This folder is where all the log files will end
up after test-runner runs.
Since test-runner must be run as root, care was taken to keep the
log files owned by the user which runs test-runner. The UID/GID
are passed to the VM, and any log files created are chown'ed back
to the user who ran test-runner.
execute_program was refactored, and both verbose and log arguments
were removed. The verbose argument was not really required since
we can do check_verbosity(argv[0]) internally. The 'log' flag was
only used along with --shell, and now the user can simply use
--log instead of dumping /tmp/iwd.log.
You can use this feature by specifying --log[=path] to test-runner.
If no path is provided the current directory will be used. Using
the --log flag will result in all processes being run with the
--verbose flag.
A new folder will be created under the --log path. The folder will
be of the name "run-<year>-<month>-<dat>-<PID>". Under this folder
you will find any global process logs. These are processes that
are only run once for ALL tests (hwsim, ifconfig, dbus etc.). There
will also be folders for specific tests that were run. Inside these
test folders will be logs of processes that are run per-test (iwd,
hostapd, python etc.).
Coverity reported this as a leak, but the test queue is actually
getting freed later and does not need to be freed locally in add_path
This basically reverts c0863e5bc6
The -U parameter only allowed for a list of unit tests to be run.
Most of the time for sanity checking you want to run all the unit
tests so this has been changed to take an optional argument.
Now, the -U flag (by itself) will run all unit tests. Running a
single or list of unit tests can still be achieved by:
--unit-tests=test-eapol,test-crypto
This makes every full test run consistent. The test list was being
stored as a hashmap, which has no been changed to a queue so we can
insert each test sorted.
Specifically, this defines the behavior when --shell is used when no
specific test is specified. In this case test-runner will assume the
'shell' test/sandbox should be used as the test environment as
running all autotests with --shell is not useful or feasable.
This option allows the script to be called with a raw XML file. This
is mostly useful for testing, but since its already implemented we
might as well include it.
Some hotspot networks do not contain SSID_STR, which was required
for both naming the provisioning file as well as the 'Name' key.
The DisplayedOperatorName is a better option for this 'Name' key
and could also be used for the filename.
Now, DisplayedOperatorName is preferred, and if not found SSID_STR
is used.
This will allow the user to see the iwd output in /tmp/iwd.log.
execute_program was extended to take a 'log' flag. If true, this
will cause the programs output to be stored in /tmp/<name>.log.
This is only useful when using the --shell command as this file
will go away once the VM stops. The verbose flag always overrides
the logging functionality.
For now only iwd output is logged when using --shell.
It is sometimes valuable to just boot into a shell in order to manually
test functionality. Since test-runner already is setup to run a minimal
kernel with all the necessary requirements for hostapd/iwd it made
sense to allow the user to do this.
If -s,--shell is passed into test runner, no python tests will be run.
The hw.conf file is still used to setup IWD and hostapd so once booted
into the shell you can still (manually) run the test (e.g. via iwctl).
This also works when using USB/PCI passthrough. This makes testing
out different kernel version with real hardware much quicker than
using the host kernel.
This tool will convert an iOS 'mobileconfig' file into the IWD
format. The tool only supports PEAP and TTLS networks, including
hotspots.
It will also parse out any certificate chains found in the
mobileconfig file, and verify they lead to a root CA found on the
system. If they do, this root CA will be used as the CACert in
the provisioning file.
Two new hardware configuration keys were added:
[radX]
iftype_disable=station,ap,adhoc,p2p_client,p2p_go,mesh_point
cipher_disable=wep40,wep104,tkip,ccmp,bip
Any of the above values are supported and can be disabled.
Support is coming to configure radios with a specific set of interface
type and cipher support, so the input to create_hwsim_radio is better
suited to use a parameter structure rather than adding more parameters.
The radio_confs key was parsed in a way that required all radios
to be specified in the list. This isnt optimal, as you may want to
specially configure a certain radio, while keeping all the others
default.
This change reworks some logic and allows any radio to be specially
configured on its own.
mac80211_hwsim now allows setting supported iftypes/ciphers. This patch
enables this support in hwsim. Specific iftypes/ciphers can now be
disabled via the command line when creating a radio:
Disable iftypes:
--iftype-disable station,ap,adhoc,p2p_client,p2p_go,mesh_point
Disable cipher types:
--cipher-disable ccmp,tkip,wep
The test should be aborted if there are not enough radios that support
AP mode. The iftype attribute will now be parsed during the wiphy dump
and a flag is set on the wiphy so we know to skip this radio when
creating the hostapd instances. Since hostapd gets started first, it
will automatically choose all the radios it needs which support AP mode.
This leaves the remainder of the radios (potentially STA only) for IWD.
In the PCI/USB passthrough changes the wiphy ID was changed to be an
unsigned integer, where id zero corresponded to an error when in native
hardware mode. Along with this, the radio ID for hwsim was changed to a
pre-increment (only in test-runner), so the radio IDs would start at 1.
The repercussions were not fully investigated, but if they were it would
have been seen that hwsim creates radios IDs starting at zero. This left
test-runner and hwsim with unsynchronized radio IDs, and radio zero
never got deleted after each test causing each successive test to
discover old radio IDs.
-nodefconfig doesn't exist anymore and according to the docs it either
had the same meaning or was implied by -no-user-config so it wouldn't be
needed anyway. -balloon doesn't exist anymore and according to
https://lists.gnu.org/archive/html/qemu-devel/2018-02/msg06985.html
"-balloon none" was a nop, but I suspect -nodefaults may have already
had the effect of disabling creation of the virtio-balloon device.
This patch allows the host machine to pass through its PCI/USB network
cards into the test-runner virtual machine. By doing this we can run
nearly all the same autotests using physical/real wireless hardware.
First off, utilizing this feature requires a properly configured host
machine. There are kernel boot parameters and config files that need to
be configured before any of this will work. Unfortunately there is no
way around this, and hence this feature is not particularly aimed for
"the masses", but rather for specially configured test machines.
A new configuration file was introduced (tools/hw.conf) which is just an
example, it should be edited to work with the host machine using it. This
file merely holds the PCI addresses/USB bus of the devices you wish to pass
through to qemu.
Passing in this hardware config file with --hw <file> tells test-runner
that you are attempting to use this new feature. The tests themselves
do not need to change, its the initial test setup that required some
changes.
Since we are no longer creating radios we must discover the radios that
are present (once in the VM). This is done using borrowed code from IWD
to dump wiphys and interfaces. As the wiphys/interfaces are dumped, we
build up the wiphy list. In the hwsim case we still build this list up
when we create the radios, which hasn't changed. This does lead us to
have some special cleaup, where in the native case we just 'reset' the
list into its state pre-test (removing any hostapd flags). And as before
with the hwsim case we fully destroy and free the wiphy list, since a
new list will be created on the next test (along with new radios).
There should not need to be any changes to the tests themselves, but
potentially to some hw.conf files. A new key was introduced, 'needs_hwsim'
which need to be set on any tests that require the hwsim dbus API. This
tells test-runner to skip this test, otherwise it would fail in native
mode.
One last minor detail; the wiphy->id was changed to an unsigned int. This
is to match the type the kernel uses when dumping wiphys. Because of
this '0' is now the error case for both hwsim and native mode rather than
-1. Error checks were updated accordingly.
Move the interface creation code from configure_hw_radios to
configure_hostapd_instaces so as not to create unneeded interfaces on
the wiphys that IWD is going to manage. We pass a wiphy whitelist to
IWD later and IWD now creates the interfaces it needs on those managed
wiphys. Change TEST_WIPHY_LIST format to only include the interface
name for the wiphys used by hostapd.
Note that we still remove interfaces just before removing the hwsim
radios on exit, it seems like there's no point removing the interfaces
in that case.
Drop a pointless asignment of has_hw_conf to false when it's already
false, fix index when accessing radio_conf_list. Apparently the SETUP
group is not used in any of our test and wasn't tested itself so could
as well have removed the code.
The option may be present but may not parse correctly as a list in which
case has_hw_conf will be true but radio_conf_list will be NULL and we
might crash.
HT/VHT require setting the regulatory domain to something other
than 00. This adds an option to the hardware config which allows
the regulatory domain to be set to any country.
HT/VHT require channels who's use is restricted depending on
country. When using these channels, cfg80211 tries to load the
regulatory.db file in /lib/firmware and verify the signature.
This poses a problem as the host machine may not have a signed
regulatory.db, or it may have not been signed with the expected
signature which would cause cfg80211 to fail to load the database.
If cfg80211 fails to load the database the country will be set to
00, which is the most restrictive "world roaming" setting. This
does not allow HT/VHT to work properly.
In the context of test-runner we can simply disable the verification.
Unforunately this is not a very common practice, so CONFIG_EXPERT
must be enabled.
If your system does not have /lib/firmware/regulatory.db you must
get it. More info can be found here:
https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
When using --valgrind, you must also use --verbose iwd, and, depending
on the tests you may also need to include pytests in the verbose flag.
Since anyone using --valgrind definitely wants to see valgrind info
printed they should not need to enable verbose printing. Also, manually
parsing valgrind prints with IWD prints mixed throughout is a nightmare
even for a single test.
This patch uses valgrind's --log-file flag, which is directed to
/tmp/valgrind.log. After the tests runs we can print out this file.
If ofono/phonesim is not found on the system, any test requiring those will
be skipped. In this case we would still try and remove symlinks that were
never created. An error would be printed, but the actual source tree files
were getting removed. This adds a new goto label where we can skip the tmpfs
removal in this error case.
-v dbus may help debug find client authentication problems but if
everything is ok it will not print any messages. -v dbus-monitor starts
the dbus-monitor.
Since we don't catch all hwsim attribute types in unicast_handler
you see tons of "Unknown attribute type: X" prints. Since this is
not an error, we should only print if the attribute does not exist
in the attribute list.
CONFIG_DRIVER_NL80211 isn't an option for the kernel. Maybe it was
mistakenly added based on the hostap configuration instructions in
doc/test-runner.txt
If the intent was to add CONFIG_CFG80211 and CONFIG_MAC80211, they're
already in the relevant kernel defconfigs.
Kernel command line arguments were not being parsed properly, $PATH in
particular was completely screwed up and causing commands in user's
$PATH to fail
In mac80211_hwsim each radio is assigned two addresses, the second (addr
1) being used over nl80211. In SendFrame we'd hardcode the mapping of
address 0 to address 1 even though we track all the addresses in radio_info,
so instead use that data to find the radio that has given address 0. Also
if no address 0 matches what was supplied over DBus try to find a matching
address 1.
There are ways userspace can request different addresses when managing
mac80211_hwsim radios and the hardcoded mapping would become wrong.
There's a new "-Werror=format-overflow" warning in gcc 8 that detects
potential overflow or truncation with sprintf/snprintf, so the
test-runner build fails with gcc 8. Using l_strdup_printf allows the
build to succeed, and moves a few large buffers from the stack to the
heap.
If the hw.conf option 'start_iwd' is false, then iwd is started
inside the python test, which means it will not know if the
--valgrind option was passed to test runner. If this is the case
an environment variable is set so the python test knows the
option is being used.
Without this subsequent tests may be affected by hwsim not being
restarted.
Additionally in 4.13 the kernel will not use the registered hwsim
wmedium for wiphys created after the HWSIM_CMD_REGISTER call and
there's no way to re-register it without disconnecting from netlink
which is a bit of work. It's a one line fix in 4.13, I've not yet
checked if this has changed in current git.
When running multiple BSSes in one ESS this solves the communication
between them (called RRB) for purposes like preauthentication,
FT key pull and push and FT-over-DS without complicated bridges. At the
same time we're unlikely to have a scenario where we need the
communication to fail so there's no need for this to be configurable.
The supporting code for multiple hostapd processes is left in place so
that configure_hostapd_instances can decide how many processes to run
based on hw.conf and policies. start_hostapd now uses "-i wln0,..."
which is no longer documented in hostapd manual page or usage() but
still supported in current git and required if interface names are not
provided in the config files (possibly unless -b is used which is also
undocumented.)
There was an unnecessary l_strsplit call when parsing the verbose
options for test-runner. The verbose options get parsed inside
qemu already, so this call was removed.
Can now pass -V, --valgrind to test-runner to run valgrind on
iwd during autotests. Note: the verbose option for iwd must
also be passed in order to see output (-v iwd).
Added a new method SendFrame() under the radios .Interface
interface. This method takes two byte arrays as parameters,
first is the station address to send the frame to, and the
second is the raw frame data.
The following verbose options can be used:
"unit" - see output from unit tests
"kernel" - see hwsim kernel prints
"pytests" - see prints from python autotests
The existing verbose option would turn on debug logging for most
processes in the test-runner framework. This change makes the verbose
option more granular. The --verbose or -v option should now be
followed by a comma separated list of the test-runner processes you
want to see debug logging from. Currently iwd, hwsim, ofonod, and
hostapd are valid options to pass to the verbose flag e.g.
-v iwd,hwsim,ofonod,hostapd
Or any single/combination of the above applications.
A new option 'sim_keys' can be put in the SETUP group. If
sim_keys=ofono, then test-runner will attempt to start ofono
and phonesim to be used with EAP-SIM/AKA. If ofono OR phonesim
are not found the test will be skipped.
Any other value of 'sim_keys' should be a 'keys' file
e.g. /tmp/sim_keys.conf which should contain hardcoded
SIM/AKA key values.
Replace is_multicast_addr with util_is_broadcast_address usage.
is_multicast_addr seems to have been wrong, first because we're not
interested in just any multicast address (defined to be same as "group
address"), but rather specifically the broadcast address, as we don't
know of any specific address groups other than broadcast. And also
wrong because the "Individual/Group bit" is the LSB of byte 0, not the
MSB of byte 0 apparently.
Derive a floating-point interval value from integers using math rather
than integer->string->float conversion. The string technique triggered a
-Wformat-overflow warning.
Use the same machine type regardless of has_virt: q35 with accelerators
list set to kvm:tcg, this will use KVM if available and fall back to TCG
if not available so there's no point checking has_virt. We can't
reliably know if KVM is usable anyway: even if the CPU has the
virtualization extensions, the support might not be enabled in the QEMU
build or there may be no kernel module or we may be calling a different
qemu executable than the one supporting KVM.
Set CPU type to "host" if KVM available and "max" otherwise because
"host" is not supported without KVM. We actually want to emulate the
host CPU as closely as possible so that host executables can run even if
optimized for the specific CPU. "max" seems to be the new way (since
Feb only) to request "host" cpu without KVM. It seems that the idea is
for "max" to become same as "host" if KVM is enabled so at some point we
will want to switch to using "max" in both cases.
The "level=9" flag seems to have been an error, there's no CPU with
cpuid max level of 9 and I can't see the purpose of setting the cpuid
level other than the host cpu's level.
-enable-kvm is redundant with accel=kvm:tcg in current qemu.
Again I'm not able to test this patch on a cpu that would be affected
by it but I hope this fixes some situations which are currently broken
anyway.
Update check_virtualization to check for the SVM on x86, KVM supports
both VMX and SVM. Fix the clobber list of the VMX check: memory is not
clobbered while ebx and edx are (ecx is already marked as output).
I'm not able to test this patch on a cpu that would be affected by it
but I don't think test-runner has been tested on those cpus yet.
Communicate the final wiphy and interface configuration data after the
hostapd and iwd processes are started, to the test scripts as an
environment variable TEST_WIPHY_LIST. This way the test scripts can
know which interfaces are used by hostapd instances, which hostapd
config they're using, and which are used by iwd. The typical value will
be
rad0=wln0=hostapd,ctrl_interface=/var/run/hostapd,config=ssidOpen.conf
rad1=wln1=iwd
Handle NewLink events to detect interface mac address changes. In my
current testing I don't see nl80211 events on address change so it's
best to react to both types of events.
The phy creation logic was a bit complex, using a hashmap to map between
phy names in the config file (e.g. rad0, rad2, etc) and interface names
created for that phy.
We take advantage of the fact that hwsim can create a radio with a given
name to simply assign the radio name from the autotest config file
directly. Then we name any interfaces created in order of phy creation.
A few extra sanity checks are also added.
Actually run hwsim in the daemon mode to work as the wireless medium now
that hwsim supports it. The current test-runner code, which assumed a
different command line syntax, wasn't functional but it didn't affect
test-runner in any way.
Don't require the full length of a Management MPDU as a condition to
forward the frame, only require data up to the three addresses we need
to know where to forward the frame.
This check was failing with some frames during a deauthentication. We
could possibly forward shorter frames too if needed (send to all
possible recipients.)
Don't handle the hwsim netlink events we use to track radios and
interfaces if we're not in daemon mode. This quiets dbus errors when
using hwsim through the command line.
The name attribute in the NEW RADIO command needs at least 4 bytes for
the attribute header (struct nlattr), all the characters of the name
string and a NUL byte, and up to 3 bytes of alignment padding.
Otherwise, depending on the name length and whether the NO_VIF attribute
was the last, that attribute could end up being dropped and we were
ending up with too many interfaces inside test-runner.
Implement a hwsim wireless medium inside hwsim.c. This doesn't do
anything to the frames it moves around yet, only tries to implement
the same logic that the kernel medium contains.
In daemon mode start a basic passive DBus interface to expose the
information on radios attached to mac80211_hwsim. In this version
interfaces have objects of their own. It might be simpler to only
show them as an array property on the radio object (array of pairs of
string, one string for address, one for name).
Read wiphy addresses from sysfs and perform the wiphy name to wiphy idx
mapping using sysfs. Do this directly on a new radio notification and
stop using new wiphy notifications except for updating the radio names.
Having the wiphy index available synchronously when parsing a new radio
event we store the wiphy index in the radio_info_rec struct directly and
drop struct wiphy_info_rec as there was a 1:1 mapping. With this, and
knowing that all radio_info data is available when new interface
notifications are received, the tracking is simplified because dbus
objects can be created and destroyed within the notification handlers.
We also now store both the wiphy hardware address data and separately
the interface MAC addresses and can use them more appropriately in the
medium implementation.
The kernel expects the radio name attribute to include the string's zero
byte. Things may still work without this if there is padding after the
attribute.
This has been now patched and the zero byte will be optional when that
patch makes its way through different trees.
Add a daemon mode that is entered when no action was specified on the
command line. In this mode hwsim tracks information on radios through
the netlink events. The interface to make use of the information is
added in the next patch.
killall doesn't wait for the iwd process to clean up, so using it is not
enough when cleaning up between tests.
Using killall -w also doesn't work since iwd is launched by the script.
By the time killall is invoked, the script process is also cleaned up.
So when iwd is killed via killall, nobody is there to reap the zombie
process (test-runner is running as init, but doesn't do this)
The easiest solution is to make the test script itself clean up any iwd
processes it launches. This is what has been implemented in the
previous patch.
Some unit tests expect to be running from the top level iwd tree
directory to load certificates and such. Make sure that test-runner
chdirs to the appropriate directory prior to running the unit tests.
The argv buffer allocated by alloca is only large enough to hold the
original argument list. Additional arguments (such as --kernel) are
appended at the end, which results in the stack corruption. Make sure
to allocate space for additional arguments.
When KVM is available, use the -cpu host option. This is useful on
distributions that might use architecture specific optimizations, which
might not be available on the default machine being emulated by qemu.
For example, a Gentoo box compiled with "-march=core-avx2" would result
in several binaries not executing properly inside the qemu environment
due to instruction set mismatches.
