The --start option was directly passed to the kernel init parameter,
preventing any environment setup from happening.
Intead always use 'run-tests' as the init process but detect --start
and execute that binary/script once inside the environment.
The table header needs to be adjusted to include spaces between
columns.
The 'adapter list' command was also updated to shorted a few
columns which were quite long for the data that is actually displayed.
The existing color code escape sequences required the user to set the
color, write the string, then unset with COLOR_OFF. Instead the macros
can be made to take the string itself and automatically terminate the
color with COLOR_OFF. This makes for much more concise strings.
ad-hoc, ap, and wsc all had descriptions longer than the max width but
this is now taken care of automatically. Remove the tab and newline's
from the description.
The WSC pin command description was also changed to be more accurate
since the pin does not need to be 8 digits.
There was no easy to use API for printing the contents of a table, and
was left up to the caller to handle manually. This adds display_table_row
which makes displaying tables much easier, including automatic support
for line truncation and continuation on the next line.
Lines which are too long will be truncated and displayed on the next
line while also taking into account any colored output. This works with any
number of columns.
This removes the need for the module to play games with encoding newlines
and tabs to make the output look nice.
As a start, this functionality was added to the command display.
This fixes a crash associated with toggling the iftype to AP mode
then calling GetDiagnostics. The diagnostic interface is never
cleaned up when netdev goes down so DBus calls can still be made
which ends up crashing since the AP interface objects are no longer
valid.
Running the following iwctl commands in a script (once or twice)
triggers this crash reliably:
iwctl device wlp2s0 set-property Mode ap
iwctl device wlp2s0 set-property Mode station
iwctl device wlp2s0 set-property Mode ap
iwctl ap wlp2s0 start myssid secret123
iwctl ap wlp2s0 show
++++++++ backtrace ++++++++
0 0x7f8f1a8fe320 in /lib64/libc.so.6
1 0x451f35 in ap_dbus_get_diagnostics() at src/ap.c:4043
2 0x4cdf5a in _dbus_object_tree_dispatch() at ell/dbus-service.c:1815
3 0x4bffc7 in message_read_handler() at ell/dbus.c:285
4 0x4b5d7b in io_callback() at ell/io.c:120
5 0x4b489b in l_main_iterate() at ell/main.c:476
6 0x4b49a6 in l_main_run() at ell/main.c:519
7 0x4b4cd9 in l_main_run_with_signal() at ell/main.c:645
8 0x404f5b in main() at src/main.c:600
9 0x7f8f1a8e8b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
The generic proxy property display was limited to a width for names/value
which makes the output look nice and uniform, but will cut off any values
which are longer than this limit.
This patch adds some logic to detect this, and continue displaying the
value on the next line.
The width arguments were also updated to be unsigned, which allows checking
the length without a cast.
testAgent had a few tests which weren't reliable, and one was not
actually testing anything, or at least not what the name implied it
should be testing.
The first issue was using iwctl in the first place. There is not a
reliable way to know when iwctl has registered its agent so relying on
that with a sleep, or waiting for the service to become available isn't
100% fool proof. To fix this use the updated PSKAgent which allows
multiple to be registered. This ensures the agent is ready for requests.
This test was also renamed to be consistent with what its actually
testing: that IWD uses the first agent registered.
This removes test_connection_with_other_agent as well because this test
case is covered by the client test itself. There is no need to re-test
iwctl's agent functionality here.
By creating a new bus connection for each agent we can register multiple
with IWD. This did mean the agent interface needs to be unique for each
agent (removing _agent_manager_if) as well as tracking multiple agents
in a list.
IWD uses a few pragmas to ignore warnings which clang does
not support. For -Werror builds these cause build failures
but can be fixed by ignoring unknown warnings and pragmas.
The dbus proxy code assumes that every interface has a set of
properties registered in a 'proxy_interface_property' structure,
assuming the interface has any properties at all. If the interface
is assumed to have no properties (and no property table) but
actually does, the property table lookup fails but is assumed to
have succeeded and causes a crash.
This caused iwctl to crash after some properties were added to DPP
since the DPP interface previously had no properties.
Now, check that the property table was valid before accessing it. This
should allow properties to be added to new interfaces without crashing
older versions of iwctl.
About a month ago hostapd was changed to set the secure bit on
eapol frames during rekeys (bc36991791). The spec is ambiguous
about this and has conflicting info depending on the sections you
read (12.7.2 vs 12.7.6). According to the hostapd commit log TGme
is trying to clarify this and wants to set secure=1 in the case
of rekeys. Because of this, IWD is completely broken with rekeys
since its disallows secure=1 on PTK 1/4 and 2/4.
Now, a bool is passed to the verify functions which signifies if
the PTK has been negotiated already. If secure differs from this
the key frame is not verified.
The test here is verifying that a DBus Connect() call will still
work with 'other' agents registered. In this case it uses iwctl to
set a password, then call Connect() manually.
The problem here is that we have no way of knowing when iwctl fully
starts and registers its agent. There was a sleep in there but that
is unreliable and we occationally were still getting past that without
iwctl having started fully.
To fix this properly we need to wait for iwctl's agent service to appear
on the bus. Since the bus name is unknown we must first find all names,
then cross reference their PID's against the iwctl PID. This is done
using ListNames, and GetConnectionUnixProcessID APIs.
The rekey/reauth logic was broken in a few different ways.
For rekeys the event list was not being reset so any past 4-way
handshake would allow the call to pass. This actually removes
the need for the sleep in the extended key ID test because the
actual handshake event is waited for correctly.
For both rekeys and reauths, just waiting for the EAP/handshake
events was not enough. Without checking if the client got
disconnected we essentially allow a full disconnect and reconnect,
meaning the rekey/reauth failed.
Now a 'disallow' array can be passed to wait_for_event which will
throw an exception if any events in that array are encountered
while waiting for the target event.
Yet another weird UML quirk. The intent of this tests was to ensure
the profile gets encrypted, and to check this both the mtime and
contents of the profile were checked.
But under UML the profile is copied, IWD started, and the profile
is encrypted all without any time passing. The (same) mtime was
then updated without any changes which fails the mtime check.
This puts a sleep after copying the profile to ensure the system
time differs once IWD encrypts the profile.
In UML if any process dies while test-runner is waiting for the DBus
service or some socket to be available it will block forever. This
is due to the way the non_block_wait works.
Its not optimal but it essentially polls over some input function
until the conditions are met. And, depending on the input function,
this can cause UML to hang since it never has a chance to go idle
and advance the time clock.
This can be fixed, at least for services/sockets, by sleeping in
the input function allowing time to pass. This will then allow
test-runner to bail out with an exception.
This patch adds a new wait_for_service function which handles this
automatically, and wait_for_socket was refactored to behave
similarly.
This function was checking if the process object exists, which can
persist long after a process is killed, or dies unexpectedly. Check
that the actual PID exists by sending signal 0.
The man pages (iwd.network) have a section about how to name provisioning
files containing non-alphanumeric characters but not everyone reads the
entire man page.
Warning them that the provisioning file was not read and pointing to
'man iwd.network' should lead someone in the right direction.
EAP-Success might come in with an identifier that is incremented by 1
from the last Response packet. Since identifier field is a byte, the
value might overflow (from 255 -> 0.) This overflow isn't handled
properly resulting in EAP-Success/Failure packets with a 0 identifier
due to overflow being erroneously ignored. Fix that.
test_decryption_failure is quite simple and only verifies that a known
network exists after starting. This causes the test to end before IWD can
fully start up leaving the DBus utilities in limbo having not fully
initialized.
Then, on the next test, stale InterfaceAdded signals arrive (for Station
and P2P) which throw exceptions when trying to get the bus (since IWD is
long gone). In addition the next IWD instance has started so any paths
included in the InterfaceAdded signals are bogus and cause additional
exceptions.
At the end of this test we can call list_devices() which will wait for
the InterfaceAdded signal, and cleanly exit afterwards.
An earlier commit fixed several options but ended up breaking others. The
result_parent/monitor_parent options are hidden from the user and only meant
to be passed to the kernel but they relied on the fact that the underscore
was present, not a dash. This updates the argument to use a dash:
--result-parent
--monitor-parent
Fixes: 00e41eb0ff ("test-runner: Fix parsing for some arguments")
The new regex match update was actually matching way more than it should
have due to how python's 'match' API works. 'match' will return successfully
if zero or more characters match from the beginning of the string. In this
case we actually need the entire regex to match otherwise we start matching
all prefixes, for example:
"--verbose iwd" will match iwd, iwd-dhcp, iwd-acd, iwd-genl and iwd-tls.
Instead use re.fullmatch which requires the entire string to match the
regex.
This was copy pasted from the autoconnect test, and depending on
how the python module cache is ordered can incorrectly use the
wrong test class. This should nothappen because we insert
the paths to the head of the list but for consistency the class
should be named something that reflects what the test is doing.
Enabling this ends up dumping so much logging and, at least with namespaces,
seems to break the logger module and cause really weird behavior, worst of
which is that all processes start dumping to stdout.
This can still be enabled explicitly with --verbose iwd-rtnl, but is turned
off by default when --log is used.
Add a fake resolvconf executable to verify that the right nameserver
addresses were actually committed by iwd. Again use unique nameserver
addresses to reduce the possibility that the test succeeds by pure luck.
