3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-11-09 05:29:23 +01:00
Commit Graph

21 Commits

Author SHA1 Message Date
James Prestwood
d232edde72 auto-t: replace waiting for network with device
Many tests waited on the network object 'connected' property after
issuing a Connect command. This is not correct as 'connected' is
set quite early in the connection process. The correct way of doing
this is waiting for the device state to change to connected.

This common code was replaced, hopefully putting to rest any random
failures that happen occasionally.
2020-09-14 16:03:04 -05:00
James Prestwood
4676dd7efd auto-t: fix testFT-PSK-roam
Some cleanup code got removed by mistake which cleared out any
hwsim rules before the next subtest. Without this the second test
would end up getting erroneous signal strength numbers in the scan
results causing a failure.
2020-09-14 16:03:04 -05:00
James Prestwood
d43a640d71 auto-t: fix testFT-PSK-roam
Switched around hwsim rules with the IWD initializer to avoid
IWD periodically scanning before hwsim rules are in place. Removed
some unneeded code during teardown.
2020-09-10 17:59:49 -05:00
James Prestwood
6e2aba3907 auto-t: Increase all test timeouts
Slower systems may not be able to make some timeouts that tests
mandated. All timeouts were increased significantly to allow tests
to pass on slow systems.
2020-09-10 17:59:49 -05:00
James Prestwood
9594b03a35 auto-t: prepare autotests for test-runner re-write
The tests basically remained the same with a few minor changes.
The wiphy_map and in turn hostapd_map are no longer used. This
was already partially converted a long time ago when the 'config'
parameter was added to HostapdCLI. This patch fully converts all
autotests to use 'config' rather than looking up by interface.

Some test scripts were named 'test.py' which was fine before but
the new rewrite actually loads each python test as a module. The
name 'test' is too ambiguous and causes issues due to a native
python module with the same name. All of these files were
renamed to 'connection_test.py'.
2020-09-10 17:59:49 -05:00
James Prestwood
72bf3aa1f5 auto-t: remove iwd_config_dir from autotests
This is no longer needed unless setting a different
directory than /tmp
2020-03-21 00:10:36 -05:00
Denis Kenzior
e540978633 treewide: Use CamelCase for [Scan] settings 2019-10-24 15:58:08 -05:00
James Prestwood
65eeab1313 auto-t: updated autotests to use hwsim.get_radio
This removes all the duplicated code where the interfaces are iterated
and the radio/hostapd instances are created. Instead the two new APIs
are used to get each instance, e.g.:

hapd = HostapdCLI(config='ssid.conf')
radio = hwsim.get_radio('radX')
2019-06-11 11:44:00 -05:00
James Prestwood
1801262f2a auto-t: update FT tests to disable FT-over-DS 2019-05-09 12:26:33 -05:00
James Prestwood
19bb93a622 auto-t: require "needs_hwsim" on hwsim tests
Running autotests with native hardware will not work on tests which
depend on the hwsim python API (since hwsim will not be running).
For these tests, it will now be required that they specify:

needs_hwsim=1

This allows the test to be skipped when running with native hardware
rather than the test failing with a python exception.
2019-05-01 17:03:37 -05:00
Andrew Zaborowski
f456ac49dc autotests: Use hostapd_map in place of wiphy_map
In the tests that only want to iterate over the hostapd interfaces,
simplify the pattern of walking through the whole wiphy_map tree by
instead using the hostapd_map variable which is already filtered to only
contain hostapd interfaces.
2019-04-22 18:16:14 -05:00
Tim Kourt
04225757d6 auto-t: Disable MAC rand. for tests with trans. medium 2019-01-16 13:20:04 -06:00
James Prestwood
ae47d12520 auto-t: use get_ordered_network call in remaining tests
This hopefully wraps up the API migration to get_ordered_network
rather than the plural (get_ordered_networks) version.
2019-01-08 21:24:59 -06:00
James Prestwood
74599ce33d auto-t: update tests to use get_ordered_network call 2018-12-14 13:47:00 -06:00
James Prestwood
699b83cb1f auto-t: removed ';' from many autotests
At some point a stray ';' got added into an autotest in a section
of code that is heavily copy pasted. So in turn nearly all the autotests
have this stray ';' after list_devices (and a few in other places).
2018-12-14 13:46:23 -06:00
Tim Kourt
dcdfdde5dc auto-t: use device waiting feature in all tests 2018-09-19 11:54:36 -05:00
Andrew Zaborowski
d3cf79ed12 autotests: Restore AP beacons after timeout in testFT-PSK-roam
In the beacon loss test try to simulate a periodic communication problem
because we don't support roaming if the AP goes away completely.
2 seconds seems to be enough to consistently trigger the beacon_loss
event without triggering a disconnect by the linux kernel or hiding the AP
from the roam scan.  Also set the RSSI for that AP lower so that it is
not reselected by iwd.
2017-08-23 13:26:58 -05:00
Andrew Zaborowski
38b5f3fee4 autotests: Add test for roam triggered by beacon loss
The two tests in test.py are similar except for the way that the roaming
is triggered.
2017-08-15 12:43:14 -05:00
Andrew Zaborowski
132d3ac11c autotests: Test operstate is IF_OPER_UP when state == connected
Test that iwd correctly sets the interface's operstate before and after
a roam, in the same autotests which run the connectivity check.
2017-05-30 17:08:36 -05:00
Andrew Zaborowski
71c15306fd autotests: Test communication when iwd reports connected
Test that the AP interface and the station interface managed by iwd
can actually send and receive ethernet traffic when iwd is in the
connected state.  Due to linux routing none of the high level utilities
like ping or arping can be easily used to test communication between
two interfaces of the same machine so use a method based on the
mac80211_hwsim/tools/hwsim_test.c utility in the wpa_supplicant tree
that uses a raw socket to inject unicast and broadcast frames.

Add this check in three tests of different security type connections
that simulate a single AP, and the two roaming tests with two APs.
Check that the station can't communicate with the other AP's interface.
2017-05-30 17:08:31 -05:00
Andrew Zaborowski
1df2e18f61 autotests: Add FT roaming test and utility functions
This tests the FT-PSK initial Mobility Domain authentication, neighbor
reports, scanning on a subset of frequencies and FT transition.
2017-03-28 15:38:38 -05:00