src/eapol.c:1041:9: error: ‘buf’ may be used uninitialized [-Werror=maybe-uninitialized]
1041 | l_put_be16(0, &frame->header.packet_len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This warning is bogus since the buffer is initialized through use of
eapol_frame members. EAPoL-Start is a very simple frame.
This event is not used anywhere and can be leveraged in autotesting.
Move the event to eapol_start() so it gets called unconditionally
when the 4-way handshake is started.
When operating as an AP, drop message 4 of the 4-way handshake if the AP
has not yet received message 2. Otherwise an attacker can skip message 2
and immediately send message 4 to bypass authentication (the AP would be
using an all-zero ptk to verify the authenticity of message 4).
ssid is declared as a 32 byte field in handshake_state, hence using it
as a string which is assumed to be nul-terminated will fail for SSIDs
that are 32 bytes long.
Fixes: d938d362b2 ("erp: ERP implementation and key cache move")
Fixes: 433373fe28 ("eapol: cache ERP keys on EAP success")
The PMKID derivation has gotten messy due to the spec
updating/clarifying the hash size for the FT-8021X AKM. This
has led to hostapd updating the derivation which leaves older
hostapd versions using SHA1 and newer versions using SHA256.
To support this the checksum type is being fed to
handshake_state_get_pmkid so the caller can decide what sha to
use. In addition handshake_state_pmkid_matches is being added
which uses get_pmkid() but handles sorting out the hash type
automatically.
This lets preauthentication use handshake_state_get_pmkid where
there is the potential that a new PMKID is derived and eapol
can use handshake_state_pmkid_matches which only derives the
PMKID to compare against the peers.
The existing API was limited to SHA1 or SHA256 and assumed a key
length of 32 bytes. Since other AKMs plan to be added update
this to take the checksum/length directly for better flexibility.
Hostapd commit bc36991791 now properly sets the secure bit on
message 1/4. This was addressed in an earlier IWD commit but
neglected to allow for backwards compatibility. The check is
fatal which now breaks earlier hostapd version (older than 2.10).
Instead warn on this condition rather than reject the rekey.
Fixes: 7fad6590bd ("eapol: allow 'secure' to be set on rekeys")
The only changes required was to set the secure bit for message 1,
reset the frame retry counter, and change the 2/4 verifier to use
the rekey flag rather than ptk_complete. This is because we must
set ptk_complete false in order to detect retransmissions of the
4/4 frame.
Initiating a rekey can now be done by simply calling eapol_start().
If the authenticator has already set an snonce then the packet must
be a retransmit. Handle this by sending 3/4 again but making sure
to not reset the frame counter.
Old wpa_supplicant versions do not set the secure bit on 2/4 during
rekeys which causes IWD to reject the message and eventually time out.
Modern versions do set it correctly but even Android 13 (Pixel 5a)
still uses an ancient version of wpa_supplicant which does not set the
bit.
Relax this check and instead just print a warning but allow the message
to be processed.
The second handshake message was hard coded with the secure bit as
zero but for rekeys the secure bit should be set to 1. Fix this by
changing the 2/4 builder to take a boolean which will set the bit
properly.
It should be noted that hostapd doesn't check this bit so EAPoL
worked just fine, but IWD's checks are more strict.
Use eap_set_peer_id() to set a string identifying the TLS server,
currently the hex-encoded SSID of the network, to be used as group name
and primary key in the session cache l_settings object. Provide pointers
to storage_eap_tls_cache_{load,sync} to eap-tls-common.c using
eap_tls_set_session_cache_ops(). Listen to Known Network removed
signals and call eap_tls_forget_peer() to have any session related to
the network also dropped from the cache.
Though TKIP is deprecated and insecure its trivial to support it in
AP mode as we already do in station. This is only to allow AP mode
for old hardware that may only support TKIP. If the hardware supports
any higher level cipher that will be chosen automatically.
The key descriptor version was hard coded to HMAC_SHA1_AES which
is correct when using IE_RSN_AKM_SUITE_PSK + CCMP. ap.c hard
codes the PSK AKM but still uses wiphy to select the cipher. In
theory there could be hardware that only supports TKIP which
would then make IWD non-compliant since a different key descriptor
version should be used with PSK + TKIP (HMAC_MD5_ARC4).
Now use a helper to sort out which key descriptor should be used
given the AKM and cipher suite.
About a month ago hostapd was changed to set the secure bit on
eapol frames during rekeys (bc36991791). The spec is ambiguous
about this and has conflicting info depending on the sections you
read (12.7.2 vs 12.7.6). According to the hostapd commit log TGme
is trying to clarify this and wants to set secure=1 in the case
of rekeys. Because of this, IWD is completely broken with rekeys
since its disallows secure=1 on PTK 1/4 and 2/4.
Now, a bool is passed to the verify functions which signifies if
the PTK has been negotiated already. If secure differs from this
the key frame is not verified.
After the initial handshake, once the TK has been installed, all frames
coming to the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to various attacks.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAPoL frames
received after the initial handshake has been completed.
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAP-Failure frame generated by
an adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted EAP frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
After the initial handshake, once the TK has been installed, all frames
coming from the AP should be encrypted. However, it seems that some
kernel/driver combinations allow unencrypted EAPoL frames to be received
and forwarded to userspace. This can lead to a denial-of-service attack
where receipt of an invalid, unencrypted EAPoL 1/4 frame generated by an
adversary results in iwd terminating an ongoing connection.
Some drivers can report whether the EAPoL frame has been received
unencrypted. Use this information to drop unencrypted PTK 1/4 frames
received after the initial handshake has been completed.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Do not fail an ongoing handshake when an invalid EAPoL frame is
received. Instead, follow the intent of 802.11-2020 section 12.7.2:
"EAPOL-Key frames containing invalid field values shall be silently
discarded."
This prevents a denial-of-service attack where receipt of an invalid,
unencrypted EAPoL 1/4 frame generated by an adversary results in iwd
terminating an ongoing connection.
Reported-by: Domien Schepers <schepers.d@northeastern.edu>
Since l_malloc is used the frame contents are not zero'ed automatically
which could result in random bytes being present in the frame which were
expected to be zero. This poses a problem when calculating the MIC as the
crypto operations are done on the entire frame with the expectation of
the MIC being zero.
Fixes: 83212f9b23 ("eapol: change eapol_create_common to support FILS")
oci variable is always set during handshake_util_find_kde. Do not
initialize it unnecessarily to help the compiler / static analysis find
potential issues.
If OCI is not used, then the oci array is never initialized. Do not try
to include it in our GTK 2_of_2 message.
Fixes: ad4d639854 ("eapol: include OCI in GTK 2/2")
802.11 added Extended Key IDs which aim to solve the issue of PTK
key replacement during rekeys. Since swapping out the existing PTK
may result in data loss because there may be in flight packets still
using the old PTK.
Extended Key IDs use two key IDs for the PTK, which toggle between
0 and 1. During a rekey a new PTK is derived which uses the key ID
not already taken by the existing PTK. This new PTK is added as RX
only, then message 4/4 is sent. This ensure message 4 is encrypted
using the previous PTK. Once sent, the new PTK can be modified to
both RX and TX and the rekey is complete.
To handle this in eapol the extended key ID KDE is parsed which
gives us the new PTK key index. Using the new handshake callback
(handshake_state_set_ext_tk) the new TK is installed. The 4th
message is also included as an argument which is taken care of by
netdev (in case waiting for NEW_KEY is required due to PAE socekts).
FT/FILS handle their own PMK derivation but rekeys still require
using the 4-way handshake. There is some ambiguity in the spec whether
or not the PMKID needs to be included in message 1/4 and it appears
that when rekeying after FT/FILS hostapd does not include a PMKID.
handshake_util_ap_ie_matches() is used to make sure that the RSN element
received from the Authenticator during handshake / association response
is the same as the one advertised in Beacon/Probe Response frames. This
utility tries to bitwise compare the element first, and only if that
fails, compares RSN members individually.
For FT, bitwise comparison will always fail since the PMKID has to be
included by the Authenticator in any RSN IEs included in Authenticate
& Association Response frames.
Perform the bitwise comparison as an optimization only during processing
of eapol message 3/4. Also keep the parsed rsn information for future
use and to possibly avoid re-parsing it during later checks.
Add a handshake event for use by the AP side for mechanisms that
allocate client IPs during the handshake: P2P address allocation and
FILS address assignment. This is emitted only when EAPOL or the
auth_proto is actually about to send the network configuration data to
the client so that ap.c can skip allocating a DHCP leases altogether if
the client doesn't send the required KDE or IE.
This returns the length of the actual contents, making the code a bit
easier to read and avoid the need to mask the KDE value which isn't
self-explanatory.
802.1x offloading needs a way to call SET_PMK after EAP finishes.
In the same manner as set_tk/gtk/igtk a new 'install_pmk' function
was added which eapol can call into after EAP completes.
