If a user connection fails on a freshly scanned psk or open hidden
network, during passphrase request or after, it shall be removed from
the network list. Otherwise, it would be possible to directly connect
to that known network, which will appear as not hidden.
The test was rekeying in a loop which ends up confusing hostapd
depending on the timing of when it gets the REKEY command and any
responses from IWD. UML seemed to handle this fine but not QEMU.
Instead delay the rekey a bit to allow it to fully complete before
sending another.
Similarly to hostapd.wait_for_event, IWD's variant needed to act on
an IO watch because events were being received prior to even calling
wait_for_event.
With how fast UML is hostapd events were being sent out prior to
ever calling wait_for_event. Instead set an IO watch on the control
socket and cache all events as they come. Then, when wait_for_event
is called, it can reference this list. If the event is found any
older events are purged from the list.
The AP-ENABLED event needed a special case because hostapd gets
started before the IO watch can be registered. To fix this an
enabled property was added which queries the state directly. This
is checked first, and if not enabled wait_for_event continues normally.
This removes prints which were never supposed to make it upstream as
well as changes sleep() to wd.wait() as well as increase the wait
period to fix issues with how fast UML runs the tests.
This allows the callers condition to be checked immediately without
the mainloop running. In addition may_block=True allows the mainloop
to poll/sleep rather than immediately return back to the caller. This
handles async IO much better than may_block=False, at least for our
use-case.
Namespace process logs were appearing under 'ip' (and also overwriting
actual 'ip' logs) since they were executed with 'ip netns exec <namespace>'.
Instead special case this and append '-<namespace>' to the log file name.
In addition processes executed prior to any tests were being put under
a folder (name of testhome directory). Now this case is detected and these
logs are put at the top level log directory.
This allows test-runner to run inside a UML binary which has some
advantages, specifically time-travel/infinite CPU speed. This should
fix any scheduler related failures we have on slower systems.
Currently this runner does not suppor the same features as the Qemu
runner, specifically:
- No hardware passthrough
- No logging/monitor (UML -> host mounting isn't implemented yet)
In order to keep all test-runner dev scripts working and to work with
the new runner.py system some file renaming was required.
test-runner was renamed to run-tests
A new test-runner was added which only creates the Runner() class.
This (as well as subsequent commits) will separate test-runner into two
parts:
1. Environment setup
2. Running tests
Spurred by interest in adding UML/host support, test-runner was in need
of a refactor to separate out the environment setup and actually running
the tests.
The environment (currently only Qemu) requires quite a bit of special
handling (ctypes mounting/reboot, 9p mounts, tons of kernel options etc)
which nobody writing tests should need to see or care about. This has all
been moved into 'runner.py'.
Running the tests (inside test-runner) won't change much.
The new 'runner.py' module adds an abstraction class which allows different
Runner's to be implemented, and setup their own environment as they see
fit. This is in preparation for UML and Host runners.
Any test using assertTrue(hostapd.list_sta()) improperly has been
replaced with wait_for_event(). There were a few places where this
was actually ok (i.e. IWD is already connected) but most needed to
be changed since the check was just after IWD connected and hostapd's
list_sta() API may not return a fully updated list.
- Setting the IP address was resulting in an error:
Error: any valid prefix is expected rather than "wln58".
This is fixed by reordering the arguments with the IP address first
- Remove the sleep, and use non_block_wait to wait for the IPv6 address
to be set.
Before setting the address, wait for the interface to go down. This
fixes somewhat rare cases where setting the address returns -EBUSY
and ultimately breaks the neighbor reports.
All tests which could avoid calling scan() directly have been
changed to use the 'full_scan' argument to get_ordered_network.
This was done because of unreliable scanning behavior on slower
systems, like VMs. If we get unlucky with the scheduler some beacons
are not received in time and in turn scan results are missing.
Using full_scan=True works around this issue by repeatedly scanning
until the SSID is found.
It looks like some architectures defconfig were adding these in
automatically, but not others. Explicitly add these to make sure
the kernel is built correctly.
Base the root user check on os.getuid() instead of SUDO_GID so as not to
implicitly require sudo. SUDO_GID being set doesn't guarantee that the
effective user is root either since you can sudo to non-root accounts.
We check that config is not None but then access config.ctx outside of
that if block anyway. Then we do the same for config.ctx and
config.ctx.args. Nest the if blocks for the checks to be useful.
p2p_peer_update_existing may be called with a scan_bss struct built from
a Probe Request frame so it can't access bss->p2p_probe_resp_info even
if peer->bss was built from a Probe Response. Check the source frame
type of the scan_bss struct before updating the Device Address.
This fixes one timing issue that would make the autotest fail often.
Since l_malloc is used the frame contents are not zero'ed automatically
which could result in random bytes being present in the frame which were
expected to be zero. This poses a problem when calculating the MIC as the
crypto operations are done on the entire frame with the expectation of
the MIC being zero.
Fixes: 83212f9b23 ("eapol: change eapol_create_common to support FILS")
explicit_bzero is used in src/storage.c since commit
01cd858760 but src/missing.h is not
included, as a result build with uclibc fails on:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/storage.o: in function `storage_init':
storage.c:(.text+0x13a4): undefined reference to `explicit_bzero'
Fixes:
- http://autobuild.buildroot.org/results/2aff8d3d7c33c95e2c57f7c8a71e69939f0580a1
When configuring wpa_supplicant all we care about is that it
received the configuration object. wpa_supplicant takes quite a bit
of time to connect in some cases so waiting for that is unneeded.
This also increases the DPP timeout which may be required on slower
systems or if the timing is particularly unlucky when receiving
frames.
This is used to hold the current BSS frequency which will be
used after IWD receives a presence announcement. Since this was
not being set, the logic was always thinking there was a channel
mismatch (0 != current_freq) and attempting to go offchannel to
'0' which resulted in -EINVAL, and ultimately protocol termination.
Change a few critical checks that were failing sometimes:
- A few asserts were changed to wait_for_object_condition
- A 15 second timeout was removed (default used instead)
- Do a full scan at beginning of each test to clear any
cached BSS's. The second test run was getting stale results
and the RSSI values were not expected.
This was not being properly honored when existing networks were
already populated. This poses an issue for any test which uses
full_scan after setting radio values such as signal strength.
For quite a while test-runner has run into frequent OOM exceptions when
running many tests in a row. Its not completely known exactly why, but
seems to point to the 9p driver which is used for sharing the root fs
between the test-runner VM and the host.
With debugging enabled (-d) one can see the available memory available
relatively stable. If a test fails it may spike ~3-4kb but this quickly
recovers as python garbage collects.
At some point the kernel faults failing to allocate which (usually) is
shown by a python OOM exception. At this point there is plenty of
available memory.
Dumping the kernel trace its seen that the 9p driver is involved:
[ 248.962949] test-runner: page allocation failure: order:7, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
[ 248.962958] CPU: 2 PID: 477 Comm: test-runner Not tainted 5.16.0 #91
[ 248.962960] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
[ 248.962961] Call Trace:
[ 248.962964] <TASK>
[ 248.962965] dump_stack_lvl+0x34/0x44
[ 248.962971] warn_alloc.cold+0x78/0xdc
[ 248.962975] ? __alloc_pages_direct_compact+0x14c/0x1e0
[ 248.962979] __alloc_pages_slowpath.constprop.0+0xbfe/0xc60
[ 248.962982] __alloc_pages+0x2d5/0x2f0
[ 248.962984] kmalloc_order+0x23/0x80
[ 248.962988] kmalloc_order_trace+0x14/0x80
[ 248.962990] v9fs_alloc_rdir_buf.isra.0+0x1f/0x30
[ 248.962994] v9fs_dir_readdir+0x51/0x1d0
[ 248.962996] ? __handle_mm_fault+0x6e0/0xb40
[ 248.962999] ? inode_security+0x1d/0x50
[ 248.963009] ? selinux_file_permission+0xff/0x140
[ 248.963011] iterate_dir+0x16f/0x1c0
[ 248.963014] __x64_sys_getdents64+0x7b/0x120
[ 248.963016] ? compat_fillonedir+0x150/0x150
[ 248.963019] do_syscall_64+0x3b/0x90
[ 248.963021] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 248.963024] RIP: 0033:0x7fedd7c6d8c7
[ 248.963026] Code: 00 00 0f 05 eb b7 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa b8 ff ff ff 7f 48 39 c2 48 0f 47 d0 b8 d9 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 81 a5 0f 00 f7 d8 64 89 02 48
[ 248.963028] RSP: 002b:00007ffd06cd87e8 EFLAGS: 00000293 ORIG_RAX: 00000000000000d9
[ 248.963031] RAX: ffffffffffffffda RBX: 000056090d87dd20 RCX: 00007fedd7c6d8c7
[ 248.963032] RDX: 0000000000080000 RSI: 000056090d87dd50 RDI: 000000000000000f
[ 248.963033] RBP: 000056090d87dd50 R08: 0000000000000030 R09: 00007fedc7d37af0
[ 248.963035] R10: 00007fedc7d7d730 R11: 0000000000000293 R12: ffffffffffffff88
[ 248.963038] R13: 000056090d87dd24 R14: 0000000000000000 R15: 000056090d0485e8
Here its seen an allocation of 512k is being requested (order:7), but faults.
In this run it there was ~35MB of available memory on the system.
Available Memory: 35268 kB
Last Test Delta: -2624 kB
Per-test Usage:
[ 0] ** 37016
[ 1] ********* 41584
[ 2] * 36280
[ 3] ********* 41452
[ 4] ******** 40940
[ 5] ****** 39284
[ 6] **** 38348
[ 7] *** 37496
[ 8] **** 37892
[ 9] 35268
This can be reproduced by running all autotests (changing the ram down to
~128MB helps trigger it faster):
./tools/test-runner -k <kernel> -d
After many attempts to fix this it was finally found that simply removing the
explicit 9p2000.u version from the kernel command line 'fixed' the problem.
This even allows decreasing the RAM down to 256MB from 384MB and so far no
OOM's have been seen.
In debug mode the test context is printed before each test. This
adds some additional information in there:
Available Memory: /proc/meminfo: MemAvailable
Last Test Delta: Change in usage between current and last test
Per-test Usage: Graph of usage relative to all past tests. This is
useful for seeing a trend down/up of usage.
