3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-05 03:29:28 +01:00
Commit Graph

4653 Commits

Author SHA1 Message Date
Denis Kenzior
037ba92894 network: Store the security type in the network object 2019-08-09 14:56:49 -05:00
Denis Kenzior
f800279814 network: Store SSID in the network object
And use network_get_ssid whenever possible to make future
transformations easier.
2019-08-09 14:56:46 -05:00
Denis Kenzior
72a8f2888a network: Move network offset calculation
network_find_rank_index was used to find the offset of the selected
network_info among known networks so as to compute a modifier based on
the rankmod table.  Instead of using known_networks_foreach for this,
moove it to knownnetworks.c where it can be coded and optimized
separately.

For now provide a simple for loop implementation.
2019-08-09 01:11:49 -05:00
James Prestwood
d2639e5d4e test-runner: log iwd output for --shell
This will allow the user to see the iwd output in /tmp/iwd.log.

execute_program was extended to take a 'log' flag. If true, this
will cause the programs output to be stored in /tmp/<name>.log.
This is only useful when using the --shell command as this file
will go away once the VM stops. The verbose flag always overrides
the logging functionality.

For now only iwd output is logged when using --shell.
2019-08-07 16:37:51 -05:00
James Prestwood
5af5498aa9 auto-t: add shell test
This is merely an empty test that can act as a sandbox for the new
--shell command. It was not named with 'test' so that autotesting
will skip it.

This test is not very useful for virtual hardware testing
(mac80211_hwsim), but very useful for USB/PCI passthrough. When
setup correctly, you can now pass through a single device and test
against real networks with a minimal kernel.
2019-08-07 16:37:51 -05:00
James Prestwood
da65acbd07 test-runner: allow booting directly into a shell
It is sometimes valuable to just boot into a shell in order to manually
test functionality. Since test-runner already is setup to run a minimal
kernel with all the necessary requirements for hostapd/iwd it made
sense to allow the user to do this.

If -s,--shell is passed into test runner, no python tests will be run.
The hw.conf file is still used to setup IWD and hostapd so once booted
into the shell you can still (manually) run the test (e.g. via iwctl).

This also works when using USB/PCI passthrough. This makes testing
out different kernel version with real hardware much quicker than
using the host kernel.
2019-08-07 16:37:51 -05:00
Denis Kenzior
2d65a0030e module: Introduce a basic module dependency framework 2019-08-07 16:33:19 -05:00
Denis Kenzior
cf58657b37 resolve: Add a missing l_free 2019-08-07 11:13:10 -05:00
Denis Kenzior
37987757e1 resolve: rename RESOLVCONF_PATH
Since it is no longer a define, switch to using lower-case letters
2019-08-07 11:09:50 -05:00
Denis Kenzior
f6bb911d2c resolve: Search more places for resolvconf exe
Some distros put resolvconf in /usr/sbin instead of /sbin.  Do not try
to hard-code the path and instead search for it in more places.
2019-08-07 10:57:11 -05:00
Denis Kenzior
a6e8622677 build: Add ell/path.[ch] to build 2019-08-07 10:46:04 -05:00
Denis Kenzior
e6102141f5 monitor: Dump Supported Operating Classes IE 2019-08-04 09:56:42 -05:00
Denis Kenzior
e7f16775ac main: Don't try to queue if name request fails
This in fact allows multiple instances of iwd to run.
2019-08-04 04:49:24 -05:00
Denis Kenzior
30315cba0d station: Add some additional roaming debugs 2019-08-04 04:49:24 -05:00
Denis Kenzior
188e6d1237 netdev: Tweak debugging for SET_CQM 2019-08-04 04:49:24 -05:00
Marcel Holtmann
899d802744 Release 0.19 2019-08-04 21:19:55 +02:00
Marcel Holtmann
deee526b98 manager: Make default_if_driver_list static 2019-08-04 00:35:14 +02:00
Marcel Holtmann
1f5ca4b108 build: Make sure to include src/p2putil.[ch] source files 2019-08-03 23:33:41 +02:00
Marcel Holtmann
16c489490c build: Fix issue with incorrect ReadWritePaths in unit files 2019-08-03 09:52:28 +02:00
Marcel Holtmann
a8faa23de6 build: Re-arrange some configuration options 2019-08-03 09:47:53 +02:00
Marcel Holtmann
30821979f6 netconfig: Use different includes that also work on older systems 2019-08-02 20:33:43 +02:00
Tim Kourt
18c339beab resolve: Add resolvconf as DNS manager
Enable the systems that use resolvconf as DNS manager to be
configurable by iwd.
2019-08-02 06:24:00 -05:00
James Prestwood
e2ec571f06 auto-t: remove dbus scan call in SAE autoconnect test
Doing this scan causes issues in the test. Like with other autoconnect
tests we can just use the fact that IWD will always be doing a periodic
scan during start up, so we only need to wait for that to finish before
querying the network list.
2019-08-02 02:23:45 -05:00
James Prestwood
8053152730 wsc: fix station lookup by ifindex
The station was being lookup up using the wdev ID rather than the
interface index.
2019-08-02 02:23:05 -05:00
James Prestwood
43e9cce1dc auto-t: fix hotspot tests to remove main.conf
The hotspot tests were not cleaning up /tmp/main.conf, which resulted
in future tests failing.
2019-08-02 02:21:53 -05:00
Denis Kenzior
07cee0e202 AUTHORS: Mention Matthias' contributions 2019-08-01 01:55:23 -05:00
Matthias Schoepfer
4ae5c38be8 iwd.service.in: remove PrivateDevices=true
Previously, the option PrivateDevices=true disabled access to
/dev/rfkill, which lead to:
  'iwctl adapter phy0 set-property Powered {off|on}'
to fail.

This patch explicitly allows access to /dev/rfkill
2019-08-01 01:55:12 -05:00
James Prestwood
236211af60 rtnlutil: fix compiler error
src/rtnlutil.c: In function ‘rtnl_route_add’:
./ell/util.h:248:2: error: ‘rtmmsg’ may be used uninitialized in
	this function [-Werror=maybe-uninitialized]
2019-07-31 12:39:41 -05:00
Denis Kenzior
66b5541970 netconfig: make ROUTE_PRIORITY_OFFSET a uint32_t
Also move it up into the static variable block
2019-07-31 12:38:40 -05:00
Denis Kenzior
1fd0dbb74b netconfig: Store rtm_protocol value directly
Instead of using a flag ipv4_static, just store the value of the rtm
protocol directly inside netconfig object.  This allows us to simplify
the logic quite significantly and avoid repeating the conditional
expression needlessly
2019-07-31 04:38:54 -05:00
Tim Kourt
2eded67c62 netconfig: Install connected and gateway routes
The routes are installed as a result of a successful installation
of the IP addresses. The gateway is fetched with netconfig_ipv4_get_gateway
helper function according to the origin of the installed IP address.

The route priority offset can be set in main.conf. The default value
of 300 is used if the offset isn’t set.
2019-07-31 03:53:32 -05:00
Denis Kenzior
be5219883c rtnlutil: Simplify error handling 2019-07-31 03:53:01 -05:00
Tim Kourt
cce59ad7f1 rtnlutil: Add connected and gateway route API
The API allows to add connected and gateway routes to the main
routing table.

rtnl_route_ipv4_add_gateway() is equivalent to the following
example 'ip route' command:
ip route add default via 10.0.0.1 dev wlan0 proto dhcp src 10.0.0.2 metric 339

rtnl_route_ipv4_add_connected()  is equivalent to the following
example 'ip route' command:
sudo ip route add 10.0.0.0/24 dev wlan0 proto dhcp src 10.0.0.2 scope link

The 'ip route' output from the above commands looks as follows:

rtnl_route_ipv4_add_connected():
10.0.0.0/24 dev wlan0 proto dhcp scope link src 10.0.0.2

rtnl_route_ipv4_add_gateway():
default via 10.0.0.1 dev wlan0 proto dhcp src 10.0.0.2 metric 339
2019-07-31 03:49:35 -05:00
Tim Kourt
a91136d4b9 netconfig: Install\uninstall DNS addresses
The DNS addresses are installed as a result of a successful
installation of the IP addresses. The DNS lists are fetched
with netconfig_ipv4_get_dns helper function according to the
origin of the installed IP address.
2019-07-31 03:42:53 -05:00
Tim Kourt
372240fe8c netconfig: Refactor Install/Uninstall for IPv4 addresses 2019-07-31 03:42:01 -05:00
Tim Kourt
72e6598c6e netconfig: Switch IPv4 DHCP event handler to use ifaddr helper 2019-07-31 03:41:47 -05:00
Tim Kourt
10791d02aa netconfig: Remove no longer used static address loader
Note: there will be provided the separate helper functions for
fetching gateway and dns
2019-07-31 03:39:47 -05:00
Tim Kourt
a4a7f88ace netconfig: Refactor station state changed event logic
iwd reconfigures the wireless interfaces with respective
connection events. Each supported network protocol is
reconfigured. The address for each protocol is
selected as static or dynamic based on availability.
2019-07-31 03:38:19 -05:00
Tim Kourt
dd188bf97a netconfig: Add helper for IPv4 addresses
netconfig_ipv4_get_ifaddr helper function allows to fetch IPv4
addresses from static or dynamic sources. The origin of the addresses
is noted in 'ipv4_is_static' flag.
2019-07-31 03:35:51 -05:00
Tim Kourt
c13b0971bb netconfig: Add 'ipv4' to ipv4-specific function names 2019-07-31 03:27:38 -05:00
James Prestwood
30fc736b62 network: update several APIs to be const 2019-07-30 14:47:37 -05:00
James Prestwood
e2bed192f6 util: knownnetworks: move timespec_compare into util 2019-07-30 14:44:38 -05:00
James Prestwood
04dc20cf5d doc: update control_port_over_nl80211 option 2019-07-30 14:41:49 -05:00
James Prestwood
3f794a1f20 iwd: netdev: deprecate ControlPortOverNL80211
control_port_over_nl80211 should now be used instead.
2019-07-30 14:41:49 -05:00
James Prestwood
e5c87a2741 doc: update management_frame_protection option 2019-07-30 14:41:49 -05:00
James Prestwood
37369f1d5e iwd: station: deprecate ManagementFrameProtection
management_frame_protection should now be used instead.
2019-07-30 14:41:49 -05:00
James Prestwood
2f8e9b9c53 doc: clean up main.conf documentation
All options should now have a description which describes the
default value for each option. The example use (commented or not)
now contains the default value as well.
2019-07-30 14:41:49 -05:00
James Prestwood
d8dac9a330 tools: add tool for iOS mobileconfig conversion
This tool will convert an iOS 'mobileconfig' file into the IWD
format. The tool only supports PEAP and TTLS networks, including
hotspots.

It will also parse out any certificate chains found in the
mobileconfig file, and verify they lead to a root CA found on the
system. If they do, this root CA will be used as the CACert in
the provisioning file.
2019-07-29 14:04:03 -05:00
James Prestwood
1fdea9b2d3 scan: station: parse HS20 version in scan results
For (Re)Association the HS20 indication element was passed exactly as
it was found in the scan results. The spec defines what bits can be
set and what cannot when this IE is used in (Re)Association. Instead
of assuming the AP's IE conforms to the spec, we now parse the IE and
re-build it for use with (Re)Association.

Since the full IE is no longer used, it was removed from scan_bss, and
replaced with a bit for HS20 support (hs20_capable). This member is
now used the same as hs20_ie was.

The version parsed during scan results is now used when building the
(Re)Association IE.
2019-07-24 00:22:46 -05:00
James Prestwood
6088c06507 ie: add parser/builder for hotspot indication element
The parser fully parses the IE and returns the version, Domain ID,
and PPS MO ID. This is meant to be used with an IE in scan results.

The builder only takes the version number, and assumes DGAF disabled,
and no Domain ID or PPS MO ID.
2019-07-24 00:13:27 -05:00