3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-11-22 14:49:24 +01:00
Commit Graph

200 Commits

Author SHA1 Message Date
Denis Kenzior
cb50eb6368 Revert "auto-t: Fix EAP-SIM-ofono test"
This reverts commit 7903432e85

The culprit was inside phonesim, not the autotest
2018-10-02 17:56:31 -05:00
Tim Kourt
d866ba7557 auto-t: prevent auto connection in pre auth roam test
iwd used to auto connect to AP before it was expected by the test
2018-10-02 16:16:36 -05:00
Tim Kourt
2cb3b7cf2e auto-t: add explicit scan and completion check
The occasional race conditions used to cause the test to fail
due to the empty list of ordered networks
2018-10-02 15:10:17 -05:00
Tim Kourt
dc49401fc0 auto-t: test TTLS-CHAP 2018-10-01 17:30:06 -05:00
Tim Kourt
fac0131e7c auto-t: test TTLS-PAP 2018-10-01 17:14:05 -05:00
James Prestwood
7903432e85 auto-t: Fix EAP-SIM-ofono test
Curiously this test started failing. The problem was incorrect KC/SRES
values in the sim.db file. I noticed no direct changes to this file,
but changes inside ofono, phonesim, and hostapd could have potentially
caused this.
2018-10-01 14:37:20 -05:00
Denis Kenzior
2527f79670 auto-t: Add WPS tests for StartPin method
This adds two additional test scenarios (using 4 digit and 8 digit
PINs) for testing the StartPin method of the WiFiSimpleConfiguration
interface.
2018-09-24 12:19:27 -05:00
Denis Kenzior
332d4f8e61 auto-t: Add additional utilities for WPS PIN support 2018-09-24 12:19:27 -05:00
James Prestwood
6f833d6cad auto-t: added autotest for FT over SAE
This test was copied from testFT-PSK-roam, but for SAE. The test behaves
as follows:

 - Connect to SAE network (full authentication)
 - Fast transition to another SAE AP
 - Fast transition to a PSK/WPA2 AP
2018-09-21 11:29:19 -05:00
Tim Kourt
3d43d633d1 auto-t: address Dbus API changes
This is a temporary fix to address the recent split of
the Device interface. This patch contains a workaround that
re-enables the auto-tests while the test framework is being
reworked to satisfy the need of the new API and should not
be considered as a permanent solution.
2018-09-19 11:59:28 -05:00
Tim Kourt
dcdfdde5dc auto-t: use device waiting feature in all tests 2018-09-19 11:54:36 -05:00
James Prestwood
96330fd75a auto-t: fix OrderedNetwork to work with station API 2018-09-14 21:45:59 -05:00
James Prestwood
dd51434560 auto-t: Fix testAP
Fixed two issues:

1. There is no longer a dbus exception when switching to AP mode when
   connected in station mode so that assert was removed.

2. After the device/station change the timing must have changed, causing
   autoconnect to take over before an explicit connect call. Added a
   psk provisioning file that disables autoconnect.
2018-09-14 01:38:45 -05:00
Marcel Holtmann
ea20559599 tools: Change net.connman.iwd.hwsim to net.connman.hwsim 2018-09-14 15:27:57 +02:00
Denis Kenzior
9ac46e900e auto-t: Use Station interface for methods 2018-09-05 11:09:35 -05:00
Denis Kenzior
0912a6afb8 auto-t: Convert RSSI agent test to the new API 2018-09-04 23:57:14 -05:00
Andrew Zaborowski
1024562e1d autotests: Always clean up in testAP
Make sure stop_ap is called on success and on failure in both tests so
that one can succeed after the other has failed.  Also make sure to move
both interfaces out of autoconnect state.
2018-08-23 21:43:27 -05:00
Denis Kenzior
d8882a75e5 auto-t: Make sure to disable autoconnect 2018-08-14 13:11:44 -05:00
James Prestwood
57fedfba46 auto-t: added test for SAE 2018-08-14 10:37:56 -05:00
Denis Kenzior
fac55f6891 auto-t: Rename SignalLevelChanged to Changed 2018-08-13 20:40:59 -05:00
James Prestwood
9ff0e8f6ef auto-t: fixed typo in autoconnect test 2018-08-13 11:09:27 -05:00
James Prestwood
a1a85b0135 auto-t: fixed TLS/TTLS autotests
These test were failing due to autoconnect taking over before
the explicit connect call. This adds Autoconnect=False to all
TLS/TTLS tests.
2018-08-10 15:43:45 -05:00
James Prestwood
4ddb95e147 auto-t: made waiting for network connection optional
The default behavior of NetworkObject.connect() is to wait for the
Connect dbus method to reply before returning back to the test. This
change makes it possible to connect, but not wait for a reply and
continue on with the test (by specifying wait=False). This is
specifically required to test SAE anti-clogging, where the AP needs
to have several simultaneous connections at once for the anti-clogging
logic to trigger. This change also adds Device.wait_for_connected()
which waits for the device interface State variable to be "connected".
2018-08-09 15:22:18 -05:00
Andrew Zaborowski
127c37ba66 autotests: Test filesystem watch in testKnownNetworks 2018-08-09 10:35:48 -05:00
James Prestwood
f00c228665 auto-t: added test for EAP-GTC w/ agent 2018-07-31 14:35:39 -05:00
Andrew Zaborowski
5dd7bd0201 autotests: Update testKnownNetworks with DBus API changes 2018-07-31 11:53:02 -05:00
James Prestwood
fc9cfdc0fe auto-t: Removed unused PSKAgent in EAP-AKA test 2018-07-24 11:53:42 -05:00
Andrew Zaborowski
e084b11d39 autotests: Wait for ConnectHiddenNetwork to finish
This lets the testHiddenNetworks tests check if exceptions have been
raised, makes exceptions_test.py pass.
2018-07-23 11:46:03 -05:00
James Prestwood
bea6a9f522 auto-t: Adhoc autotests 2018-07-17 17:03:08 -05:00
James Prestwood
12b3ac47fd auto-t: Added adhoc util functions to IWD class 2018-07-17 17:02:59 -05:00
Tim Kourt
e64c1e5dc7 auto-t: modify scan test to include hidden networks 2018-07-11 17:23:44 -05:00
Tim Kourt
4f953586e6 auto-t: add test for the hidden networks 2018-07-11 17:23:31 -05:00
Tim Kourt
63232dd7fe auto-t: known networks
1) wait for a device to become available
2) add try, except block for the clean termination of iwd in
   the case of a failure
3) increase the max execution time to help with valgrind
2018-07-02 18:51:06 -05:00
Tim Kourt
6bffa395d9 auto-t: ConnectAutoconnect
1) wait for a device to become available
2) add try, except block for the clean termination of iwd in
       the case of a failure
3) remove waits
4) eliminate a race condition on get_ordered_networks()
2018-07-02 18:51:06 -05:00
James Prestwood
8a91d88629 auto-t: failure test for WPA2
The AP code merge resulted in changes to handshake failure
code paths. This just adds a failure test to WPA2 to test
these failure code paths.
2018-07-02 13:05:42 -05:00
James Prestwood
c9b4e41604 auto-t: updated tests to use new list_devices
list_devices() was updated to take an integer rather than a bool
for the wait_to_appear argument. This updates any tests that
explicily passed True/False as the argument to list_devices.
2018-07-02 13:05:38 -05:00
James Prestwood
003c1dbc97 auto-t: Changed list_devices() wait_to_appear to int
The list_devices API has a race condition where sometimes it will
return zero or less than the expected number of devices and fail
the test. A fix is in place for when only a single devices is
expected, but some tests expect more than one device. This changes
wait_to_appear to an integer, and the caller can specify the number
of devices they expect to get back. The default stays as it was,
zero or "return cached devices".
2018-07-02 13:05:34 -05:00
James Prestwood
69fe274c7d auto-t: Fixed AP test to work with multiple sub-tests
The single AP test worked fine, but adding a failure test caused some
problems. Since the kernel is never restarted between tests it maintains
old stale scan results from the previous test. This was causing an
assert to sometimes fail in the second test being run because it was
returning > 1 ordered networks. This change iterates through the ordered
network list and chooses the appropriate network rather than assuming
get_ordered_networks() will always return only one network object
2018-06-29 18:30:28 -05:00
James Prestwood
7fedc2bf66 auto-t: Updated start/stop_ap to use new interface 2018-06-29 18:28:41 -05:00
Tim Kourt
5eb043e501 autotests: support new errors 2018-06-29 13:46:36 -05:00
Tim Kourt
e9fef6ba52 auto-t: add connect API for the hidden networks
In addition, add dbus exception for the service set overlap
2018-06-28 15:59:18 -05:00
Tim Kourt
395a70d652 auto-t: fix wait logic for the devices
In addition, it makes InterfacesAdded\Removed handlers
a little more generic.
2018-06-28 15:57:49 -05:00
James Prestwood
28c400499d auto-t: added failure test case to AP
Tests an invalid PSK.
2018-06-27 14:41:25 -05:00
Denis Kenzior
025f9a3760 autotests: Fix EAP-PEAP-MSCHAPv2 test
The Identity field needed to be escaped
2018-06-14 19:25:29 -05:00
Andrew Zaborowski
91456b8d98 autotests: Test 4 ways MsCHAPv2 can be configured 2018-06-13 12:18:08 -05:00
James Prestwood
e2ac29b492 auto-t: added reauth to connection test
Both EAP-SIM and EAP-AKA will now attempt a reauth after the
connection to exercise reset_state.
2018-06-12 11:09:10 -05:00
Tim Kourt
d402b6034a auto-t: enable debug output for iwd
This enables debug output for iwd when started from python
2018-05-31 19:28:16 -05:00
Denis Kenzior
6c2ecc6ca5 autotests: Bump iwd startup timeout
iwd now performs a lot of crypto checks at startup, so the timeout was
sometimes being triggered.
2018-05-30 22:36:41 -05:00
Denis Kenzior
0c701d974a autotests: Bump timeout value
Since EAP-PWD now tests EAP Re-Authentication and waits, bump up the
test timeout time.
2018-05-30 22:36:41 -05:00
Tim Kourt
ca0f993358 auto-t: change EAP-PWD to trigger eapol reauth 2018-05-30 22:36:34 -05:00