It looks like some architectures defconfig were adding these in
automatically, but not others. Explicitly add these to make sure
the kernel is built correctly.
Base the root user check on os.getuid() instead of SUDO_GID so as not to
implicitly require sudo. SUDO_GID being set doesn't guarantee that the
effective user is root either since you can sudo to non-root accounts.
We check that config is not None but then access config.ctx outside of
that if block anyway. Then we do the same for config.ctx and
config.ctx.args. Nest the if blocks for the checks to be useful.
For quite a while test-runner has run into frequent OOM exceptions when
running many tests in a row. Its not completely known exactly why, but
seems to point to the 9p driver which is used for sharing the root fs
between the test-runner VM and the host.
With debugging enabled (-d) one can see the available memory available
relatively stable. If a test fails it may spike ~3-4kb but this quickly
recovers as python garbage collects.
At some point the kernel faults failing to allocate which (usually) is
shown by a python OOM exception. At this point there is plenty of
available memory.
Dumping the kernel trace its seen that the 9p driver is involved:
[ 248.962949] test-runner: page allocation failure: order:7, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
[ 248.962958] CPU: 2 PID: 477 Comm: test-runner Not tainted 5.16.0 #91
[ 248.962960] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
[ 248.962961] Call Trace:
[ 248.962964] <TASK>
[ 248.962965] dump_stack_lvl+0x34/0x44
[ 248.962971] warn_alloc.cold+0x78/0xdc
[ 248.962975] ? __alloc_pages_direct_compact+0x14c/0x1e0
[ 248.962979] __alloc_pages_slowpath.constprop.0+0xbfe/0xc60
[ 248.962982] __alloc_pages+0x2d5/0x2f0
[ 248.962984] kmalloc_order+0x23/0x80
[ 248.962988] kmalloc_order_trace+0x14/0x80
[ 248.962990] v9fs_alloc_rdir_buf.isra.0+0x1f/0x30
[ 248.962994] v9fs_dir_readdir+0x51/0x1d0
[ 248.962996] ? __handle_mm_fault+0x6e0/0xb40
[ 248.962999] ? inode_security+0x1d/0x50
[ 248.963009] ? selinux_file_permission+0xff/0x140
[ 248.963011] iterate_dir+0x16f/0x1c0
[ 248.963014] __x64_sys_getdents64+0x7b/0x120
[ 248.963016] ? compat_fillonedir+0x150/0x150
[ 248.963019] do_syscall_64+0x3b/0x90
[ 248.963021] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 248.963024] RIP: 0033:0x7fedd7c6d8c7
[ 248.963026] Code: 00 00 0f 05 eb b7 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa b8 ff ff ff 7f 48 39 c2 48 0f 47 d0 b8 d9 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 81 a5 0f 00 f7 d8 64 89 02 48
[ 248.963028] RSP: 002b:00007ffd06cd87e8 EFLAGS: 00000293 ORIG_RAX: 00000000000000d9
[ 248.963031] RAX: ffffffffffffffda RBX: 000056090d87dd20 RCX: 00007fedd7c6d8c7
[ 248.963032] RDX: 0000000000080000 RSI: 000056090d87dd50 RDI: 000000000000000f
[ 248.963033] RBP: 000056090d87dd50 R08: 0000000000000030 R09: 00007fedc7d37af0
[ 248.963035] R10: 00007fedc7d7d730 R11: 0000000000000293 R12: ffffffffffffff88
[ 248.963038] R13: 000056090d87dd24 R14: 0000000000000000 R15: 000056090d0485e8
Here its seen an allocation of 512k is being requested (order:7), but faults.
In this run it there was ~35MB of available memory on the system.
Available Memory: 35268 kB
Last Test Delta: -2624 kB
Per-test Usage:
[ 0] ** 37016
[ 1] ********* 41584
[ 2] * 36280
[ 3] ********* 41452
[ 4] ******** 40940
[ 5] ****** 39284
[ 6] **** 38348
[ 7] *** 37496
[ 8] **** 37892
[ 9] 35268
This can be reproduced by running all autotests (changing the ram down to
~128MB helps trigger it faster):
./tools/test-runner -k <kernel> -d
After many attempts to fix this it was finally found that simply removing the
explicit 9p2000.u version from the kernel command line 'fixed' the problem.
This even allows decreasing the RAM down to 256MB from 384MB and so far no
OOM's have been seen.
In debug mode the test context is printed before each test. This
adds some additional information in there:
Available Memory: /proc/meminfo: MemAvailable
Last Test Delta: Change in usage between current and last test
Per-test Usage: Graph of usage relative to all past tests. This is
useful for seeing a trend down/up of usage.
Running the tests inside a VM makes it difficult for the host to figure
out if the test actually failed or succeeded. For a human its easy to
read the results table, but for an automated system parsing this would
be fragile. This adds a new option --result <file> which writes PASS/FAIL
to the provided file once all tests are completed. Any failures results in
'FAIL' being written to the file.
Currently CreateRadio only allows a single outstanding DBus message
until the radio is fully created. 99% of the time this is just fine
but in order to test dual phy cards there needs to be support for
phy's appearing at the same time.
This required storing the pending DBus message inside the radio object
rather than a single static variable.
The code was refactored to handle the internal radio info objects better
for the various cases:
- Creation from CreateRadio()
- Radio already existed before hwsim started, or created externally
- Existing radio changed name, address, etc.
First, Name is now a required option to CreateRadio(). This allows
the radio info to be pushed to the queue immediately (also allowing the
pending DBus message to be tracked). Then, when the NEW_RADIO event
fires the pending radio can be looked up (by name) and filled with the
remaining info.
If the radio was not found by name but a matching ID was found this is
the 'changed' case and the radio is re-initialized with the changed
values.
If neither name or ID matches the radio was created externally, or
prior to hwsim starting. A radio info object is created at this time
and initialized.
The ID was changed to a signed integer in order to initialize it to an
invalid number -1. Doing this was required since a pending uninitalized
radio ID (0) could match an existing radio ID. This required some
bounds checks in case the kernels counter reaches an extremely high value.
This isn't likely to ever happen in practice.
This tool will decrypt an IWD network profile which was previously
encrypted using a systemd provided key. Either a text passphrase
can be provided (--pass) or a file containing the secret (--file).
This can be useful for debugging, or recovering an encrypted
profile after enabling SystemdEncrypt.
This is created by the python interpreter for speed optimization
but poses problems if copied to /tmp since previous tests may
have already copied it leading to an exception.
Right now hwsim blindly tries to forward broadcast/multicast frames to
all interfaces it knows about and relies on the kernel to reject the
forwarding attempt if the frequency does not match. This results in
multiple copies of the same message being added to the genl transmit
queue.
On slower systems this can cause a run-away memory consumption effect
where the queued messages are not processed in time prior to a new
message being received for forwarding. The likelyhood of this effect
manifesting itself is directly related to the number of hostapd
instances that are created and are beaconing simultaneously.
Try to optimize frame forwarding by not sending beacon frames
to those interfaces that are in AP mode (i.e. pure hostapd instances)
since such interfaces are going to be operating on a different frequency
and would not be interested in processing beacon frames anyway.
This optimization cuts down peak memory use during certain tests by 30x
or more (~33mb to ~1mb) when profiled with 'valgrind --tool=massif'
It appears different versions of pyroute2 may or may not have
iwutil, and instead use pyroute2.IW() directly. Try the iwutil
way first, then pyroute2.IW()
After namespaces were added, the dbus address was customized to
be /tmp/dbus{0..N}. This prevented any dbus applications started
in the shell from working properly.
Set DBUS_SYSTEM_BUS_ADDRESS to the environment prior to entering
the shell.
If set, a rule will start matching 'MatchBytes' some number of bytes
into the frame (MatchBytesOffset). This is useful since header
information, addresses, and sequence numbers may be unpredictable
between test runs.
To avoid unintended matches the Prefix property is left unchanged
and will match starting at the beginning of the frame.
The hwsim rules did not treat frames and ACKs any differently which
can mislead the developer especially when setting a rule prefix.
If a prefix was used the frame ACK was actually being matched against
the original frame payload which seems wrong because the ACK is not
the original frame.
Though strange, matching the frame prefix on an ACK has its place if
the developer wants to block just the ACK rather than the frame so
to make this case more clear 'DropAck' was added as a rule property.
And only if this is true will an ACK be checked and potentially
dropped.
To maintain the current hwsim behavior DropAck will default to true.
This integer property can be set to only match a rule a number of
times rather than all packets. This is useful for testing behavior
of a single dropped frame or ack. Once the rule has been matched
'MatchTimes' the rules will no longer be applied (unless set again
to some integer greater than zero).
Since Process.processes is a weak reference dictionary any process
put in this dict will disappear if all references are lost. This
is much better than keeping a list in the Namespace which will hold
the references forever until test-runner manually kills them all at
the end of the test. This does still need to be done for daemon
processes but everything else can just go away when it is no longer
needed.
The test-runner logging is very basic and just dumps everything into files
per-test. This means any subtests are just appended to existing log files
which can be difficult to parse after the fact. This is especially hard
when IWD/Hostapd runs once for the entirety of the test (as opposed to
killing between tests).
This patch writes out a separator between each subtests in the form:
===== <file>:<function> =====
To do this all processes are now kept as weak references inside the
Process class itself. Process.write_separators() can be called which
will iterate through all running processes and write the provided
separator.
This also paves the way to remove the ctx.processes array which is more
trouble than its worth due to reference issues.
Note: For tests which start IWD this will have no effect as the separator
is written prior to the test running. For these tests though, it is
much easier to read the log files because you can clearly see when
IWD starts and exits.
Processes which were not explicitly killed ended up staying around
forever because they internally held references to other objects
such as GLib IO watches or write FDs.
This shuffles some code so these objects get cleaned up both when
explititly killed and after being waited for.
This was a placeholder at one point but modules grew to depend on it
being a string. Fix these dependencies and set the root namespace
name to None so there is no more special case needed to handle both
a named namespace and the original 'root' namespace.
Check whether verbose output is enabled for process name arg[0] before
prepending the "ip netns exec" part to arg since arg[0] is going to be
"ip" after that.
These modules only needed to be imported a single time for the entire
run of tests. This is significantly cheaper in terms of memory and
should prevent random OOM exceptions.
The Procss class was doing quite a bit of what Popen already does like
storing the return code and process arguments. In addition the Process
class ended up storing a Popen object which was frequently accessed.
For both simplicity and memory savings have Process inherit Popen and
add the additional functionality test-runner needs like stdout
processing to output files and the console.
To do this Popen.wait() needed to be overridden to to prevent blocking
as well as wait for the HUP signal so we are sure all the process
output was written. kill() was also overritten to perform cleanup.
The most intrusive change was removing wait as a kwarg, and instead
requiring the caller to call wait(). This doesn't change much in
terms of complexity to the caller, but simplifies the __init__
routine of Process.
Some convenient improvements:
- Separate multiple process instance output (Terminate: <args> will
be written to outfiles each time a process dies.)
- Append to outfile if the same process is started again
- Wait for HUP before returning from wait(). This allows any remaining
output to be written without the need to manually call process_io.
- Store ctx as a class variable so callers don't need to pass it in
(e.g. when using Process directly rather than start_process)
This was initially put in to solve an issue that was specific to
mac80211_hwsim where the connect callback would get queued and
delayed until after the connect event. This caused IWD to get very
confused.
Later it was found that "real" drivers can sometimes do this so
some code was added to IWD core to handle it.
Now there isn't much point to delay all frames unless a rule specifies
so change the behavior back to sending out frames immediately.
The hwsim Rule API was structured as properties so once a rule is
created it automatically starts being applied to frames. This happens
before anything has time to actually define the rule (source, destination
etc). This leads to every single frame being matched to the rule until
these other properties are added, which can result in unexpected behavior.
To fix this an "Enabled" property has been added and the rule will not
be applied until this is true.
The -S/--sub-tests option allows the user to specify a test file
from inside an autotest. Inside this file there may also be many
test functions. This option is being extended to allow running
a single test function inside a test file. For example:
* Runs all test functions inside connection_test.py *
./test-runner -A some_test -S connection_test
* Runs only connection_test.py test_connect_success() *
./test-runner -A some_test -S connection_test.test_connect_success
