This is a general way of finding the best MCS/NSS values which will work
for HT, VHT, and HE by passing in the max MCS values for each value which
the MCS map could contain (0, 1, or 2).
The HE capabilities information is contained in
NL80211_BAND_ATTR_IFTYPE_DATA where each entry is a set of attributes
which define the rules for one or more interface types. This patch
specifically parses the HE PHY and HE MCS data which will be used for
data rate estimation.
Since the set of info is per-iftype(s) the data is stored in a queue
where each entry contains the PHY/MCS info, and a uint32 bit mask where
each bit index signifies an interface type.
With the addition of HE, the print function for MCS sets needs to change
slightly. The maps themselves are the same format, but the values indicate
different MCS ranges. Now the three MCS max values are passed in.
This queue will hold iftype(s) specific data for HE capabilities. Since
the capabilities may differ per-iftype the data is stored as such. Iftypes
may share a configuration so the band_he_capabilities structure has a
mask for each iftype using that configuration.
When PCI adapters are properly configured they should exist in the
vfio-pci system tree. It is assumed any devices configured as such
are used for test-runner.
This removes the need for a hw.conf file to be supplied, but still
is required for USB adapters. Because of this the --hw option was
updated to allow no value, or a file path.
subprocess.Popen's wait() method was overwritten to be non-blocking but
in certain circumstances you do want to wait forever. Fix this to allow
timeout=None, which calls the parent wait() method directly.
Certain module dependencies were missing, which could cause a crash on
exit under (very unlikely) circumstances.
#0 l_queue_peek_head (queue=<optimized out>) at ../iwd-1.28/ell/queue.c:241
#1 0x0000aaaab752f2a0 in wiphy_radio_work_done (wiphy=0xaaaac3a129a0, id=6)
at ../iwd-1.28/src/wiphy.c:2013
#2 0x0000aaaab7523f50 in netdev_connect_free (netdev=netdev@entry=0xaaaac3a13db0)
at ../iwd-1.28/src/netdev.c:765
#3 0x0000aaaab7526208 in netdev_free (data=0xaaaac3a13db0) at ../iwd-1.28/src/netdev.c:909
#4 0x0000aaaab75a3924 in l_queue_clear (queue=queue@entry=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:107
#5 0x0000aaaab75a3974 in l_queue_destroy (queue=0xaaaac3a0c800,
destroy=destroy@entry=0xaaaab7526190 <netdev_free>) at ../iwd-1.28/ell/queue.c:82
#6 0x0000aaaab7522050 in netdev_exit () at ../iwd-1.28/src/netdev.c:6653
#7 0x0000aaaab7579bb0 in iwd_modules_exit () at ../iwd-1.28/src/module.c:181
In this particular case, wiphy module was de-initialized prior to the
netdev module:
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/wiphy.c:wiphy_free() Freeing wiphy phy0[0]
Jul 14 18:14:39 localhost iwd[2867]: ../iwd-1.28/src/netdev.c:netdev_free() Freeing netdev wlan0[45]
Since we use git ls-files to produce the list of all tests for -A, if
the source directory is owned by somebody other than root one might
get:
fatal: unsafe repository ('/home/balrog/repos/iwd' is owned by someone else)
To add an exception for this directory, call:
git config --global --add safe.directory /home/balrog/repos/iwd
Starting
/home/balrog/repos/iwd/tools/..//autotests/ threw an uncaught exception
Traceback (most recent call last):
File "/home/balrog/repos/iwd/tools/run-tests", line 966, in run_auto_tests
subtests = pre_test(ctx, test, copied)
File "/home/balrog/repos/iwd/tools/run-tests", line 814, in pre_test
raise Exception("No hw.conf found for %s" % test)
Exception: No hw.conf found for /home/balrog/repos/iwd/tools/..//autotests/
Mark args.testhome as a safe directory on every run.
Test that the DHCPv4 lease got renewed after the T1 timer runs out.
Then also simulate the DHCPREQUEST during renew being lost and
retransmitted and the lease eventually getting renewed T1 + 60s later.
The main downside is that this test will inevitably take a while if
running in Qemu without the time travel ability.
Update the test and some utility code to run hostapd in an isolated net
namespace for connection_test.py. We now need a second hostapd
instance though because in static_test.py we test ACD and we need to
produce an IP conflict. Moving the hostapd instance unexpectedly fixes
dhcpd's internal mechanism to avoid IP conflicts and it would no longer
assign 192.168.1.10 to the second client, it'd notice that address was
already in use and assign the next free address, or fail if there was
none. So add a second hostapd instance that runs in the main namespace
together with the statically-configured client, it turns out the test
relies on the kernel being unable to deliver IP traffic to interfaces on
the same system.
The kernel will not let us test some scenarios of communication between
two hwsim radios (e.g. STA and AP) if they're in the same net namespace.
For example, when connected, you can't add normal IPv4 subnet routes for
the same subnet on two different interfaces in one namespace (you'd
either get an EEXIST or you'd replace the other route), you can set
different metrics on the routes but that won't fix IP routing. For
testNetconfig the result is that communication works for DHCP before we
get the inital lease but renewals won't work because they're unicast.
Allow hostapd to run on a radio that has been moved to a different
namespace in hw.conf so we don't have to work around these issues.
The --start option was directly passed to the kernel init parameter,
preventing any environment setup from happening.
Intead always use 'run-tests' as the init process but detect --start
and execute that binary/script once inside the environment.
The table header needs to be adjusted to include spaces between
columns.
The 'adapter list' command was also updated to shorted a few
columns which were quite long for the data that is actually displayed.
The existing color code escape sequences required the user to set the
color, write the string, then unset with COLOR_OFF. Instead the macros
can be made to take the string itself and automatically terminate the
color with COLOR_OFF. This makes for much more concise strings.
ad-hoc, ap, and wsc all had descriptions longer than the max width but
this is now taken care of automatically. Remove the tab and newline's
from the description.
The WSC pin command description was also changed to be more accurate
since the pin does not need to be 8 digits.
There was no easy to use API for printing the contents of a table, and
was left up to the caller to handle manually. This adds display_table_row
which makes displaying tables much easier, including automatic support
for line truncation and continuation on the next line.
Lines which are too long will be truncated and displayed on the next
line while also taking into account any colored output. This works with any
number of columns.
This removes the need for the module to play games with encoding newlines
and tabs to make the output look nice.
As a start, this functionality was added to the command display.
This fixes a crash associated with toggling the iftype to AP mode
then calling GetDiagnostics. The diagnostic interface is never
cleaned up when netdev goes down so DBus calls can still be made
which ends up crashing since the AP interface objects are no longer
valid.
Running the following iwctl commands in a script (once or twice)
triggers this crash reliably:
iwctl device wlp2s0 set-property Mode ap
iwctl device wlp2s0 set-property Mode station
iwctl device wlp2s0 set-property Mode ap
iwctl ap wlp2s0 start myssid secret123
iwctl ap wlp2s0 show
++++++++ backtrace ++++++++
0 0x7f8f1a8fe320 in /lib64/libc.so.6
1 0x451f35 in ap_dbus_get_diagnostics() at src/ap.c:4043
2 0x4cdf5a in _dbus_object_tree_dispatch() at ell/dbus-service.c:1815
3 0x4bffc7 in message_read_handler() at ell/dbus.c:285
4 0x4b5d7b in io_callback() at ell/io.c:120
5 0x4b489b in l_main_iterate() at ell/main.c:476
6 0x4b49a6 in l_main_run() at ell/main.c:519
7 0x4b4cd9 in l_main_run_with_signal() at ell/main.c:645
8 0x404f5b in main() at src/main.c:600
9 0x7f8f1a8e8b75 in /lib64/libc.so.6
+++++++++++++++++++++++++++
The generic proxy property display was limited to a width for names/value
which makes the output look nice and uniform, but will cut off any values
which are longer than this limit.
This patch adds some logic to detect this, and continue displaying the
value on the next line.
The width arguments were also updated to be unsigned, which allows checking
the length without a cast.
testAgent had a few tests which weren't reliable, and one was not
actually testing anything, or at least not what the name implied it
should be testing.
The first issue was using iwctl in the first place. There is not a
reliable way to know when iwctl has registered its agent so relying on
that with a sleep, or waiting for the service to become available isn't
100% fool proof. To fix this use the updated PSKAgent which allows
multiple to be registered. This ensures the agent is ready for requests.
This test was also renamed to be consistent with what its actually
testing: that IWD uses the first agent registered.
This removes test_connection_with_other_agent as well because this test
case is covered by the client test itself. There is no need to re-test
iwctl's agent functionality here.
By creating a new bus connection for each agent we can register multiple
with IWD. This did mean the agent interface needs to be unique for each
agent (removing _agent_manager_if) as well as tracking multiple agents
in a list.
IWD uses a few pragmas to ignore warnings which clang does
not support. For -Werror builds these cause build failures
but can be fixed by ignoring unknown warnings and pragmas.
James Prestwood