3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-05 03:29:28 +01:00
Commit Graph

6485 Commits

Author SHA1 Message Date
James Prestwood
5776ce87d7 auto-t: testSAQuery remove ungraceful restart
Instead the same effect can be seen by just ifdown/ifup the interface.
2021-08-25 08:51:45 -05:00
James Prestwood
f6683bab75 auto-t: hwsim.py: convert addresses to 42:* format
mac80211_hwsim has a funny quirk with multiple addresses in
radios. Some operations require address index zero, some index
one. And these addresses (possibly a result of how test-runner
initializes radios) sometimes get mixed up. For example scan
results may show a BSS address as 02:00:00:00:00:00, while the
next test run shows 42:00:00:00:00:00.

Ultimately, sending out frames requires the first nibble of the
address to be 0x4 so to handle both variants of addresses described
above hwsim.py was updated to always bitwise OR the first byte
with 0x40.
2021-08-25 08:51:45 -05:00
Andrew Zaborowski
58d2814a92 ap: Support FILS IP Address Assignment IE
Handle the 802.11ai FILS IP Address Assignment IEs in Association
Request frames when netconfig is enabled.  Only IPv4 is supported.
Like the P2P IP Allocation mechanism, since the payload format and logic
is independent from the rest of the FILS standard this is enabled
unconditionally for clients who want to use it even though we don't
actually do FILS in AP mode.
2021-08-25 08:32:16 -05:00
Andrew Zaborowski
8f5f62575d ie: Add FILS IP Address Assignment parsers and builders 2021-08-25 08:02:57 -05:00
Andrew Zaborowski
3045ef0770 ap: Expire client's leases on disconnect
If netconfig is enabled tell the DHCP server to expire any leases owned
by the client that is disconnecting by using l_dhcp_server_expire_by_mac
to return the IPs to the IP pool.  They're added to the expired list
so they'd only be used if there are no other addresses left in the pool
and can be reactivated if the client comes back before the address is
used by somebody else.

This should ensure that we're always able to offer an address to a new
client as long as there are fewer concurrent clients than addresses in
the configured subnet or IP range.
2021-08-25 08:02:38 -05:00
Andrew Zaborowski
3eff81864c autotests: Test GO-side IP Allocation in testP2P
Check if our wpa_supplicant P2P Client has received the allocated
Clieant IP/netmask/GO IP values we sent in the 4-Way Handshake.
2021-08-25 08:02:17 -05:00
Andrew Zaborowski
bc046994db ap: Implement P2P GO-side 4-way handshake IP Allocation
Use the struct handshake_state::support_ip_allocation field already
supported in eapol.c authenticator side to enable the P2P IP Allocation
mechanism in ap.c.  Add the P2P_GROUP_CAP_IP_ALLOCATION bit in P2P group
capabilities to signal the feature is now supported.

There's no harm in enabling this feature in every AP (not just P2P Group
Owner) but the clients won't know whether we support it other than
through that P2P-specific group capability bit.
2021-08-25 08:02:13 -05:00
Andrew Zaborowski
a90c4025f1 handshake: Add HANDSHAKE_EVENT_P2P_IP_REQUEST
Add a handshake event for use by the AP side for mechanisms that
allocate client IPs during the handshake: P2P address allocation and
FILS address assignment.  This is emitted only when EAPOL or the
auth_proto is actually about to send the network configuration data to
the client so that ap.c can skip allocating a DHCP leases altogether if
the client doesn't send the required KDE or IE.
2021-08-25 08:01:23 -05:00
Denis Kenzior
ed10b00afa unit: Fix eapol IP Allocation test failure
This test was failing due to a change introduced in commit
5c9de0cf23 which changed handshake state storage of IPs from host
order to network byte order.  Update the test to set IPs in network
byte-order.

Fixes: 5c9de0cf23 ("eapol: Store IP address in network byte order")
2021-08-23 08:56:07 -05:00
Marcel Holtmann
c96812a5f6 Release 1.17 2021-08-22 06:19:21 +02:00
Marcel Holtmann
89de05463d build: Require at least version 0.43 when building with external ELL 2021-08-22 06:17:52 +02:00
Denis Kenzior
a75126af39 netdev: Retry IF_OPER_UP
Some drivers ignore the initial IF_OPER_UP setting that was sent during
netdev_connect_ok().  Attempt to work around this by parsing New Link
events.  If OperState setting is still not correct in a subsequent event,
retry setting OperState to IF_OPER_UP.
2021-08-20 09:49:29 -05:00
James Prestwood
47ebd81393 auto-t: remove ANQP delay test
The idea of this test is valid but it is extremely timing dependent
which simply isn't testable on all machines. Removing this test
at least until this can be tested reliably.
2021-08-18 19:53:22 -05:00
James Prestwood
07da17ec5f auto-t: update tests to enable hwsim rules 2021-08-18 19:53:19 -05:00
James Prestwood
db9f001865 auto-t: combine testBSSBlacklist tests
All 4 tests were combined to reuse hwsim rule code, and improve
cleanup between running tests.
2021-08-18 19:53:16 -05:00
James Prestwood
b252b65ee0 auto-t: hwsim.py: handle Prefix/Enabled in __str__ 2021-08-18 19:53:12 -05:00
James Prestwood
f328d62f55 auto-t: hwsim.py: add Enabled property 2021-08-18 19:53:07 -05:00
James Prestwood
382bbf1861 hwsim: remove unconditional packet delay
This was initially put in to solve an issue that was specific to
mac80211_hwsim where the connect callback would get queued and
delayed until after the connect event. This caused IWD to get very
confused.

Later it was found that "real" drivers can sometimes do this so
some code was added to IWD core to handle it.

Now there isn't much point to delay all frames unless a rule specifies
so change the behavior back to sending out frames immediately.
2021-08-18 19:52:46 -05:00
James Prestwood
a4ee9c8152 hwsim: require enabling rule before use
The hwsim Rule API was structured as properties so once a rule is
created it automatically starts being applied to frames. This happens
before anything has time to actually define the rule (source, destination
etc). This leads to every single frame being matched to the rule until
these other properties are added, which can result in unexpected behavior.

To fix this an "Enabled" property has been added and the rule will not
be applied until this is true.
2021-08-18 19:52:23 -05:00
James Prestwood
9eb3adc33b anqp: print MAC when sending ANQP request 2021-08-18 19:52:20 -05:00
James Prestwood
ea572f23fc network: handle NULL/hotspot networks when removing secrets
The hotspot case can actually result in network being NULL which
ends up crashing when accessing "->secrets". In addition any
secrets on this network were never removed for hotspot networks
since everything happened in network_unset_hotspot.
2021-08-18 16:58:31 -05:00
James Prestwood
6f9dd97f50 test-runner: fix subtest option
This was not working correctly and would run all subtests when only a single
was requested
2021-08-18 16:57:38 -05:00
James Prestwood
07fc7905ca auto-t: fix error handling in testHotspot
testHotspot suffered from improper cleanup and if a single test failed
all subsequent tests would fail due to IWD still running since IWD()
was never cleaned up.

In addition the PSK agent and hwsim rules are now set onto the cls
object and removed in tearDownClass()
2021-08-18 16:57:34 -05:00
James Prestwood
8e5a68f407 hwsim: add Rule.remove_all()
There are really no cases where a test wants to remove a single
rule. Most loop through and remove rules individually so this
is being added as a convenience.
2021-08-18 16:57:29 -05:00
James Prestwood
1e0553250b auto-t: scan as many times as needed to find networks
Certain autotests coupled with slower test machines can result in lost
beacons and "Network not found" errors. In attempt to help with this
the test can just rescan (30 seconds max) until the network is found.
2021-08-18 16:55:47 -05:00
James Prestwood
3616b37789 auto-t: separate PEAP + SIM test
Remove EAP-SIM from the generic PEAP test case since skipping
(if ofono is not on system) would skip the entire test rather
than just the EAP-SIM portion.
2021-08-17 17:02:32 -05:00
James Prestwood
81cf11b0f5 test-runner: fix exception in Hostapd __del__
If Hostapd did not start there was no CLI instance created and
that member should be be accessed.
2021-08-17 11:44:36 -05:00
James Prestwood
f0a890da8a auto-t: remove duplicate EAP tests
This removes any EAP test which was combined into testEAP as well
as modifies any special EAP test to use the now global eap-users
file.
2021-08-17 11:44:36 -05:00
James Prestwood
c21dc9ed6f auto-t: Add universal testEAP test
This tests all EAP methods in their standard configuration. Any
corner cases requiring changes to main.conf or other hostapd
options are not included and will be left as stand alone tests.

This was done because nearly all EAP tests are identical except
the IWD provisioning file and hostapd EAP users fine. The IWD
provisioning file can be swapped out as needed for each individual
test without actually restarting IWD. And the EAP users file can
simply be written to include every possible EAP method that
is supported.
2021-08-17 11:44:36 -05:00
James Prestwood
99a94bc441 network: destroy secrets on known network removal
If a known network is removed explicitly IWD should forget any
secrets cached on the network object.
2021-08-17 11:44:36 -05:00
James Prestwood
fd43a3938f test-runner: extend -S option
The -S/--sub-tests option allows the user to specify a test file
from inside an autotest. Inside this file there may also be many
test functions. This option is being extended to allow running
a single test function inside a test file. For example:

* Runs all test functions inside connection_test.py *
./test-runner -A some_test -S connection_test

* Runs only connection_test.py test_connect_success() *
./test-runner -A some_test -S connection_test.test_connect_success
2021-08-17 11:44:36 -05:00
James Prestwood
42fe6c5a15 auto-t: hostapd.py: remove _hostapd_restarted concept
The destructor was trying to do more than the scope of a destructor
by trying to handle this single case of hostapd being restarted.

Instead we can simply pass a keyword argument 'reinit' to the
constructor to tell it to reinitialize everything. And as for killing
hostapd this can be done in ungraceful_restart itself rather than
trying to handle it in the destructor.
2021-08-16 11:33:26 -05:00
James Prestwood
7b98a6ed9c test-runner: only remove GLib timeout if it exists
There was a race condition here where the GLib timeout could have
fired but the test function returned successfully prior to the
end of the while loop. This would end up causing source_remove to
print a warning that the source did not exist.

Instead check if the timeout fired prior to removing it.
2021-08-13 20:39:13 -05:00
James Prestwood
cb4f1d2a99 auto-t: turn off scan address randomization in testHotspot
This (hopefully) will make this test pass better on slower machines.
In addition the mechanism of copying over separate main.conf files
was changed (rather than echo'ing the option into /tmp/main.conf)
2021-08-13 20:39:13 -05:00
James Prestwood
a2c777ba84 auto-t: iwd.py: clean up StationDebug
Initialize this once and reference that for each method/property
2021-08-13 20:39:13 -05:00
James Prestwood
973ee269d3 auto-t: return existing instance from HostapdCLI
This addresses the TODO where HostapdCLI was creating separate
objects each time HostapdCLI was called. This was worked around
by manually setting the important members but instead the class
can be re-worked to act as somewhat of a singleton, per-config
at least.

If there is no HostapdCLI instance for a given config one is
created and initialized. Subsequent HostapdCLI calls (for the
same config) will be returned the same object rather than a
new one.
2021-08-13 20:39:13 -05:00
James Prestwood
f721f1de1e auto-t: skip testEAP-PEAP-SIM if ofonod is not running 2021-08-13 16:44:14 -05:00
James Prestwood
dbd8842d51 test-runner: fix test skipping
Tests that called skipTest would result in an exception which would
hault execution as it was uncaught. In addition this wouldn't result
in an skipped test.

Now the actual test run is surrounded in a try/except block, skipped
exceptions are handled specifically, and a stack trace is printed if
some other exception occurs.
2021-08-13 16:44:14 -05:00
Denis Kenzior
6fee25af9b test-runner: Make run 2021-08-13 15:19:28 -05:00
James Prestwood
790bb44785 test-runner: don't always print failure to remove ctrl interface
This can happen, particularly with SAQuery when hostapd is forcefully
killed. Better to only print when running in debug mode.
2021-08-13 15:18:40 -05:00
James Prestwood
c03afda96f test-runner: start dmesg early with --follow
dmesg was being called at the very end of testing and dumped into
a log file. If many tests were run this could take quite a long
time and was timing out the default process wait. Instead --follow
can be used (basically like 'tail') which prints messages as they
come and avoids the time consuming full dump at the end.
2021-08-13 15:18:40 -05:00
James Prestwood
365f955318 auto-t: ead.py: remove wait_for_object_condition
Instead the class method IWD._wait_for_object_condition can
be used.
2021-08-13 15:18:40 -05:00
James Prestwood
382b73c11a auto-t: cleanup dhcpd.leases[~] in testNetconfig 2021-08-13 15:18:40 -05:00
James Prestwood
5c14742a87 auto-t: use prefix on hotspot anqp test
The hotspot ANQP delay test was setting a global delay on all
packets which had some unintended consequences. At the time this
was the only way of simulating the test scenario but now hwsim
supports prefix matching so only the ANQP request/response will
be delayed.
2021-08-13 15:18:40 -05:00
James Prestwood
c2caa325ba auto-t: fix testAgent use of Process
This test was accessing the subprocess object and calling terminate
which ends up causing issues with test-runners own process cleanup.
Instead kill() should be used.
2021-08-13 15:18:40 -05:00
James Prestwood
82d7c81bd3 auto-t: remove unneeded BSSs in testEAP-MSCHAPv2
Hostapd sometimes has trouble with specifying additional BSSs in
a single config file, at least in the test-runner environment.
Since all the BSS's specified were identical instead the test was
reworked to only have a single BSS and each subtest can connect
in its own unique way.
2021-08-13 14:54:53 -05:00
James Prestwood
3adb91fc9e auto-t: iwd.py: allow renaming in copy_to_storage
By providing a 'name' keyword argument the file copied will be
renamed to that.
2021-08-13 14:54:53 -05:00
James Prestwood
78f5a5dde4 auto-t: speed up testRoamRetry
This test took quite a while to execute (~2 minutes on my machine)
because there was simply no other way to test this scenario but
waiting. Now the no-roam-candidates condition can be waited for
rather than just sleeping for 20 seconds. Additionally the default
RoamRetryInterval was being used which is 60 seconds. Instead
main.conf can set this to 5 seconds and really cut down on the time
to wait.

Part of a comment was also removed due to being incorrect. Even
with neighbor reports IWD still must scan, its just that the
scan is more limited and, in theory, faster.
2021-08-13 14:45:14 -05:00
James Prestwood
36777d1e68 auto-t: iwd.py: add StationDebug.Event support
Adds a new wait_for_event API which waits for a StationDebug.Event.
2021-08-13 14:45:12 -05:00
James Prestwood
cd2dd4e2dc station: Add generic Event signal
This is meant to be used as a generic notification to autotests. For
now 'no-roam-candidates' is the only event being sent. The idea
is to extend these events to signal conditions that are otherwise
undiscoverable in autotesting.
2021-08-13 14:44:24 -05:00