3
0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-12-27 02:32:52 +01:00
Commit Graph

234 Commits

Author SHA1 Message Date
James Prestwood
06ee531749 testutil: retry up to 3 times for connectivity 2019-03-19 09:42:53 -05:00
Tim Kourt
55b3a974c6 auto-t: Split EAP-WPS tests
Previously, the WPS tests have shared a single instance of iwd
among themselves. This approach didn’t allow to identify which
tests have passed and which failed. The new solution makes WPS
tests independent from each other by creating a new instance
of iwd for each one of them.
2019-03-19 09:41:39 -05:00
Tim Kourt
664cf5a368 auto-t: TTLS-MSCHAPv2 - remove iwd instance on failure 2019-03-15 17:04:11 -05:00
Tim Kourt
bda956f2b2 auto-t: SAE - remove iwd instance on failure 2019-03-15 17:04:07 -05:00
Tim Kourt
b4485f3e1b auto-t: Ad-Hoc - remove iwd instance on failure 2019-03-15 17:03:34 -05:00
James Prestwood
6de133aee7 auto-t: add timeout test for testOWE
This simulates an authenticate timeout. This test really just proves
that IWD doesn't crash in this case.
2019-03-01 17:15:22 -06:00
James Prestwood
981892470a auto-t: test for temporary blacklist
The simplest way to test this was to create a new AP, where
max_num_sta=1. This only allows a single STA to connect to this AP.
We connect a device to this AP, then try and connect with another.
This results in hostapd failing with DENIED_NO_MORE_STAS, which will
cause a temporary blacklist. We can then disconnect both devices,
and reconnect the device that previously got denied. If it connects
then we know the blacklist only persisted for that earlier connection.
2019-03-01 13:13:19 -06:00
James Prestwood
d47e31954b auto-t: add test for HT/VHT rates
This is a VERY simple test for HT/VHT. Since there are so many potential
options in the IE this really just tests that drops in RSSI will cause
IWD to choose a different BSS, even if that means choosing HT over VHT,
or even basic rates over HT/VHT.
2019-02-25 15:10:31 -06:00
James Prestwood
dc280b83d7 auto-t: add config file for testSAE
This conf file was forgotten after updating SAE to work with group 20
2019-02-07 11:10:14 -06:00
James Prestwood
2e5099a716 auto-t: add SAE test for group 20 2019-02-01 16:01:01 -06:00
James Prestwood
3ecf091196 auto-t: clean up SAE autotests
SAE has a clogging test which requires 4 radios to all simultaneously
connect. All the other tests are only using one of these radios, so
in these tests we explicitly disconnect these devices preventing them
from autoconnecting.
2019-02-01 15:57:23 -06:00
James Prestwood
ffa943f02f auto-t: Use group 20 in EAP-PWD autotest
Since the EAP-PWD fragmentation test uses group 19 there is test
coverage there for that group. This changes connection_test to use
group 20 instead of 19.
2019-01-31 12:42:28 -06:00
James Prestwood
2522216379 auto-t: Add test for BSS blacklisting 2019-01-30 13:27:34 -06:00
James Prestwood
8956451b26 test-runner: decouple --verbose with --valgrind
When using --valgrind, you must also use --verbose iwd, and, depending
on the tests you may also need to include pytests in the verbose flag.
Since anyone using --valgrind definitely wants to see valgrind info
printed they should not need to enable verbose printing. Also, manually
parsing valgrind prints with IWD prints mixed throughout is a nightmare
even for a single test.

This patch uses valgrind's --log-file flag, which is directed to
/tmp/valgrind.log. After the tests runs we can print out this file.
2019-01-18 08:57:21 -06:00
Tim Kourt
04225757d6 auto-t: Disable MAC rand. for tests with trans. medium 2019-01-16 13:20:04 -06:00
Tim Kourt
f8fedb0ec8 auto-t: Disable MAC rand. for tests with hidden networks 2019-01-16 13:19:48 -06:00
Tim Kourt
0b4509d8d2 auto-t: Test Tunneled-MSCHAPv2 over TTLS 2019-01-10 17:26:22 -06:00
James Prestwood
ae47d12520 auto-t: use get_ordered_network call in remaining tests
This hopefully wraps up the API migration to get_ordered_network
rather than the plural (get_ordered_networks) version.
2019-01-08 21:24:59 -06:00
James Prestwood
edbe38103a auto-t: remove hwsim dependency from testSAQuery
hwsim was imported but never used
2019-01-08 21:24:25 -06:00
James Prestwood
2f4c9d05fe auto-t: use get_ordered_network in testWPA2
Modified 'password_test' in testWPA2 to use the new get_ordered_network
call.
2019-01-07 17:02:53 -06:00
James Prestwood
74599ce33d auto-t: update tests to use get_ordered_network call 2018-12-14 13:47:00 -06:00
James Prestwood
9d3d65a282 auto-t: add get_ordered_network(ssid)
This is a helper/shortcut to get_ordered_networks (plural). In nearly
all the autotests we had (roughly) the same block of code:

ordered_network = get_ordered_networks()[0]

self.assertNotEqual(ordered_network, None)
self.assertEqual(ordered_network.name, "someSsid")

Rather than having to do this, we can simplify and just have a single
call to get_ordered_network, which takes the SSID. If the SSID is not
found, we raise an exception. This avoids needing both asserts since
we are guarenteed that the return is valid and the SSID matches.

This also avoids possible issues with multiple networks showing up in
the GetOrderedNetworks call. Eventually test-runner will support running
tests on real wireless hardware, so its possible we could pick up
unexpected networks in the scan.
2018-12-14 13:46:32 -06:00
James Prestwood
699b83cb1f auto-t: removed ';' from many autotests
At some point a stray ';' got added into an autotest in a section
of code that is heavily copy pasted. So in turn nearly all the autotests
have this stray ';' after list_devices (and a few in other places).
2018-12-14 13:46:23 -06:00
Andrew Zaborowski
d558724676 autotests: Update expected error in password length test 2018-12-03 14:21:30 -06:00
Andrew Zaborowski
c9d8346d40 autotests: Test bad PSK password lengths 2018-11-30 10:26:33 -06:00
James Prestwood
373d78dacb auto-t: add OWE autotest 2018-11-19 12:10:55 -06:00
Tim Kourt
da9b1f785e auto-t: switch MD5 to new property key 2018-10-29 18:46:07 -05:00
James Prestwood
ec4cb6beeb auto-t: test connectivity in testWPA
testWPA was not verifying connectivity between the two interfaces. Funny
enough, doing this resulted in the same problems that adhoc had where
we were setting the connection as complete before the gtk/igtk were set.
This is fixed now so we can now use testutil in this test.
2018-10-26 15:29:55 -05:00
James Prestwood
da262e7187 auto-t: fix testFT-8021x-roam autoconnect
As with many other test, we need to disable autoconnect for better
reliablility.
2018-10-26 15:29:52 -05:00
Tim Kourt
6661f8c83e auto-t: Change EAP-PWD to a common pwd setting key name 2018-10-25 14:52:41 -05:00
Tim Kourt
fc6cebb259 auto-t: rename test
Rename test to avoid confusion with TTLS-MSCHAPV2
2018-10-25 14:15:04 -05:00
Tim Kourt
d8905e0666 auto-t: switch GTC to new property key 2018-10-25 14:15:01 -05:00
Tim Kourt
096caf2084 auto-t: test TTLS-MSCHAP 2018-10-25 13:56:13 -05:00
Tim Kourt
10382156b4 auto-t: kill instances of iwd 2018-10-19 14:16:00 -05:00
Denis Kenzior
cb50eb6368 Revert "auto-t: Fix EAP-SIM-ofono test"
This reverts commit 7903432e85

The culprit was inside phonesim, not the autotest
2018-10-02 17:56:31 -05:00
Tim Kourt
d866ba7557 auto-t: prevent auto connection in pre auth roam test
iwd used to auto connect to AP before it was expected by the test
2018-10-02 16:16:36 -05:00
Tim Kourt
2cb3b7cf2e auto-t: add explicit scan and completion check
The occasional race conditions used to cause the test to fail
due to the empty list of ordered networks
2018-10-02 15:10:17 -05:00
Tim Kourt
dc49401fc0 auto-t: test TTLS-CHAP 2018-10-01 17:30:06 -05:00
Tim Kourt
fac0131e7c auto-t: test TTLS-PAP 2018-10-01 17:14:05 -05:00
James Prestwood
7903432e85 auto-t: Fix EAP-SIM-ofono test
Curiously this test started failing. The problem was incorrect KC/SRES
values in the sim.db file. I noticed no direct changes to this file,
but changes inside ofono, phonesim, and hostapd could have potentially
caused this.
2018-10-01 14:37:20 -05:00
Denis Kenzior
2527f79670 auto-t: Add WPS tests for StartPin method
This adds two additional test scenarios (using 4 digit and 8 digit
PINs) for testing the StartPin method of the WiFiSimpleConfiguration
interface.
2018-09-24 12:19:27 -05:00
Denis Kenzior
332d4f8e61 auto-t: Add additional utilities for WPS PIN support 2018-09-24 12:19:27 -05:00
James Prestwood
6f833d6cad auto-t: added autotest for FT over SAE
This test was copied from testFT-PSK-roam, but for SAE. The test behaves
as follows:

 - Connect to SAE network (full authentication)
 - Fast transition to another SAE AP
 - Fast transition to a PSK/WPA2 AP
2018-09-21 11:29:19 -05:00
Tim Kourt
3d43d633d1 auto-t: address Dbus API changes
This is a temporary fix to address the recent split of
the Device interface. This patch contains a workaround that
re-enables the auto-tests while the test framework is being
reworked to satisfy the need of the new API and should not
be considered as a permanent solution.
2018-09-19 11:59:28 -05:00
Tim Kourt
dcdfdde5dc auto-t: use device waiting feature in all tests 2018-09-19 11:54:36 -05:00
James Prestwood
96330fd75a auto-t: fix OrderedNetwork to work with station API 2018-09-14 21:45:59 -05:00
James Prestwood
dd51434560 auto-t: Fix testAP
Fixed two issues:

1. There is no longer a dbus exception when switching to AP mode when
   connected in station mode so that assert was removed.

2. After the device/station change the timing must have changed, causing
   autoconnect to take over before an explicit connect call. Added a
   psk provisioning file that disables autoconnect.
2018-09-14 01:38:45 -05:00
Marcel Holtmann
ea20559599 tools: Change net.connman.iwd.hwsim to net.connman.hwsim 2018-09-14 15:27:57 +02:00
Denis Kenzior
9ac46e900e auto-t: Use Station interface for methods 2018-09-05 11:09:35 -05:00
Denis Kenzior
0912a6afb8 auto-t: Convert RSSI agent test to the new API 2018-09-04 23:57:14 -05:00