It appears different versions of pyroute2 may or may not have
iwutil, and instead use pyroute2.IW() directly. Try the iwutil
way first, then pyroute2.IW()
After namespaces were added, the dbus address was customized to
be /tmp/dbus{0..N}. This prevented any dbus applications started
in the shell from working properly.
Set DBUS_SYSTEM_BUS_ADDRESS to the environment prior to entering
the shell.
Since Process.processes is a weak reference dictionary any process
put in this dict will disappear if all references are lost. This
is much better than keeping a list in the Namespace which will hold
the references forever until test-runner manually kills them all at
the end of the test. This does still need to be done for daemon
processes but everything else can just go away when it is no longer
needed.
The test-runner logging is very basic and just dumps everything into files
per-test. This means any subtests are just appended to existing log files
which can be difficult to parse after the fact. This is especially hard
when IWD/Hostapd runs once for the entirety of the test (as opposed to
killing between tests).
This patch writes out a separator between each subtests in the form:
===== <file>:<function> =====
To do this all processes are now kept as weak references inside the
Process class itself. Process.write_separators() can be called which
will iterate through all running processes and write the provided
separator.
This also paves the way to remove the ctx.processes array which is more
trouble than its worth due to reference issues.
Note: For tests which start IWD this will have no effect as the separator
is written prior to the test running. For these tests though, it is
much easier to read the log files because you can clearly see when
IWD starts and exits.
Processes which were not explicitly killed ended up staying around
forever because they internally held references to other objects
such as GLib IO watches or write FDs.
This shuffles some code so these objects get cleaned up both when
explititly killed and after being waited for.
This was a placeholder at one point but modules grew to depend on it
being a string. Fix these dependencies and set the root namespace
name to None so there is no more special case needed to handle both
a named namespace and the original 'root' namespace.
Check whether verbose output is enabled for process name arg[0] before
prepending the "ip netns exec" part to arg since arg[0] is going to be
"ip" after that.
These modules only needed to be imported a single time for the entire
run of tests. This is significantly cheaper in terms of memory and
should prevent random OOM exceptions.
The Procss class was doing quite a bit of what Popen already does like
storing the return code and process arguments. In addition the Process
class ended up storing a Popen object which was frequently accessed.
For both simplicity and memory savings have Process inherit Popen and
add the additional functionality test-runner needs like stdout
processing to output files and the console.
To do this Popen.wait() needed to be overridden to to prevent blocking
as well as wait for the HUP signal so we are sure all the process
output was written. kill() was also overritten to perform cleanup.
The most intrusive change was removing wait as a kwarg, and instead
requiring the caller to call wait(). This doesn't change much in
terms of complexity to the caller, but simplifies the __init__
routine of Process.
Some convenient improvements:
- Separate multiple process instance output (Terminate: <args> will
be written to outfiles each time a process dies.)
- Append to outfile if the same process is started again
- Wait for HUP before returning from wait(). This allows any remaining
output to be written without the need to manually call process_io.
- Store ctx as a class variable so callers don't need to pass it in
(e.g. when using Process directly rather than start_process)
The -S/--sub-tests option allows the user to specify a test file
from inside an autotest. Inside this file there may also be many
test functions. This option is being extended to allow running
a single test function inside a test file. For example:
* Runs all test functions inside connection_test.py *
./test-runner -A some_test -S connection_test
* Runs only connection_test.py test_connect_success() *
./test-runner -A some_test -S connection_test.test_connect_success
There was a race condition here where the GLib timeout could have
fired but the test function returned successfully prior to the
end of the while loop. This would end up causing source_remove to
print a warning that the source did not exist.
Instead check if the timeout fired prior to removing it.
This addresses the TODO where HostapdCLI was creating separate
objects each time HostapdCLI was called. This was worked around
by manually setting the important members but instead the class
can be re-worked to act as somewhat of a singleton, per-config
at least.
If there is no HostapdCLI instance for a given config one is
created and initialized. Subsequent HostapdCLI calls (for the
same config) will be returned the same object rather than a
new one.
Tests that called skipTest would result in an exception which would
hault execution as it was uncaught. In addition this wouldn't result
in an skipped test.
Now the actual test run is surrounded in a try/except block, skipped
exceptions are handled specifically, and a stack trace is printed if
some other exception occurs.
dmesg was being called at the very end of testing and dumped into
a log file. If many tests were run this could take quite a long
time and was timing out the default process wait. Instead --follow
can be used (basically like 'tail') which prints messages as they
come and avoids the time consuming full dump at the end.
There was a common bit of code all over test-runner and utilities
which would wait for 'something' in a loop. At best these loops
would do the right thing and use the GLib.iteration call as to not
block the main loop, and at worst would not use it and just busy
wait.
Namespace.non_block_wait unifies all these into a single API to
a) do the wait correctly and b) prevent duplicate code.
While losing the convenience of unittest this patch breaks out
each individual test function in order to run it manually and
get results. This vastly improves the user experience by seeing
which test file and function is being executed rather than simply
seeing "PASSED" for the entire test set.
In addition exceptions/failures are printed out as they happen
rather than at the end.
With the addition of connect_bssid/roam very few tests actually
require hwsim. Since hwsim can lead to problems with scan results
its best to have it off by default and have each test that needs
it explicitly turn it on.
Tests which previously turned it off have had that option removed.
Tests that do require hwsim still are vulnerable to scan result
problems, so for these tests beacon_int was added to the hostapd
config which seems to help with reliability somewhat.
If a test has no hw.conf file test-runner was fully exiting and not
running any additional tests. This shouldn't happen in practice
since all upstreamed tests should run, but if any locally created
tests existed like this, it would cause the entire test run to exit
early.
Instead raise an exception which bails out of only that test, and
allows the rest to continue.
The Process class requires the ability to write out any processes
output to stdout, logging, or an explicit file, as well as store
it inside python for processing by test utilities. To accomplish
this each process was given a temporary file to write to, and that
file had an IO watch set on it. Any data that was written was then
read, and re-written out to where it needed to go. This ended up
being very buggy and quite complex due to needing to mess with
read/write pointers inside the file.
Popen already creates pipes to stdout if told, and they are accessable
via the p.stdout. Its then as simple as setting an IO watch on that
pipe and keeping the same code for reading out new data and writing
it to any files we want. This greatly reduces the complexity.
Occationally python will fatally terminate trying to load a test
using importlib with an out of memory exception. Increasing RAM
allows reliable exection of all tests.
When logging is enabled TLS debugging is turned on which creates
a PEM file during runtime. There is no way for IWD itself to clean
this up since its meant to be there for debugging.
Newer QEMU version warn that msize is set too low and may result
in poor IO performance. The default is 8KiB which QEMU claims is
too low. Explicitly setting to 10KiB removes the warning:
qemu-system-x86_64: warning: 9p: degraded performance: a
reasonable high msize should be chosen on client/guest side
(chosen msize is <= 8192).
See https://wiki.qemu.org/Documentation/9psetup#msize for details.
We seem to be not specifying the msize for the root filesystem, which
results in this warning being printed:
emu-system-x86_64: warning: 9p: degraded performance: a reasonable high msize should be chosen on client/guest side (chosen msize is <= 8192). See https://wiki.qemu.org/Documentation/9psetup#msize for details.
There doesn't seem to be much performance difference in the end since
iwd does not process large files.
Right now the --valgrind option logs to a static file named
'valgrind.log'. This means that for any test that run multiple
instances of iwd, output is lost for all invocations except the last.
Fix that by using a per-process log file and making sure that all log
files are printed to stdout when the test ends.
This approach isn't perfect since it is possible for the pid to be
reused, but better than the current behavior.
test-runner will print out if files were left behind after a
test which lets the developer know something was not cleaned
up. But in this case test-runner should also remove these files
so they are not left, and printed, for each subsequent test.
Certain tests like testAP spawn two IWD process in separate
namespaces. When --valrind is used this eats up quite a bit
of RAM and causes the VM to run out of memory and start
killing off processes.
Since using --valgrind actually runs IWD using the valgrind
process the --verbose flag would only work if 'valgrind' was
also specified. This was taken into account with is_verbose
but the actual logic enabling stdout did not use that helper.
This was due, in part, to logging since is_verbose will always
return true if --log is used. To fix this a new flag was added
to is_verbose which omits the --log check to handle this
specific case.
