Split eapol_start into two calls, one to register the state machine so
that the PAE read handler knows not to discard frames for that ifindex,
and eapol_start to actually start processing the frames. This is needed
because, as per the comment in netdev.c, due to scheduling the PAE
socket read handler may trigger before the CMD_CONNECT event handler,
which needs to parse the FTE from the Associate Response frame and
supply it to the eapol SM before it can do anything with the message 1
of 4 of the FT handshake.
Another issue is that depending on the driver or timing, the underlying
link might not be marked as 'ready' by the kernel. In this case, our
response to Message 1 of the 4-way Handshake is written and accepted by
the kernel, but gets dropped on the floor internally. Which leads to
timeouts if the AP doesn't retransmit.
This function takes an Operating Channel and a Country String to convert
it into a band. Using scan_oper_class_to_band and scan_channel_to_freq,
an Operating Channel, a Country String and a Channel Number together can
be converted into an actual frequency. EU and US country codes based on
wpa_supplicant's tables.
It doesn't matter for crypto_derive_pairwise_ptk in non-SHA256 mode
but in the FT PTK derivation function, as well as in SHA256 mode all
bytes of the output do actually change with the PTK size.
Fix autoconnect trying to connect to networks never used before as found
by Tim Kourt. Update the comments to be consistent with the use of the
is_known field and the docs, in that a Known Network is any network that
has a config file in the iwd storage, and an autoconnect candidate is a
network that has been connected to before.
If the handshake fails, we trigger a deauthentication prior to reporting
NETDEV_RESULT_HANDSHAKE_FAILED. If a netdev_disconnect is invoked in
the meantime, then the caller will receive -ENOTCONN. This is
incorrect, since we are in fact logically connected until the connect_cb
is notified.
Tweak the behavior to keep the connected variable as true, but check
whether disconnect_cmd_id has been issued in the netdev_disconnect_event
callback.
If the device is currently connected, we will initiate a disconnection
(or wait for the disconnection to complete) prior to starting the
WSC-EAP association.
Use the org.freedesktop.DBus.Properties interfaces on objects with
properties and drop the old style GetProperty/SetProperty methods on
individual interfaces. Agent and KnownNetworks have no properties at
this time so don't add org.freedesktop.DBus.Properties interfaces.
We send the scan results where we obtained a PushButton target over to
device object. If EAP-WSC transaction is successful, then the scan
results are searched to find a network/bss combination found in the
credentials obtained. If found, the network is connected to
automatically.
This also fixes a potential buffer overflow since the ssid was cast to a
string inside network_create. However, ssid is a buffer of 32 bytes,
and would not be null-terminated in the case of a 32-byte SSID.
==5362== Conditional jump or move depends on uninitialised value(s)
==5362== at 0x419B62: wsc_wfa_ext_iter_next (wscutil.c:52)
==5362== by 0x41B869: wsc_parse_probe_response (wscutil.c:1016)
==5362== by 0x41FD77: scan_results (wsc.c:218)
==5362== by 0x415669: get_scan_done (scan.c:892)
==5362== by 0x432932: destroy_request (genl.c:134)
==5362== by 0x433245: process_unicast (genl.c:394)
==5362== by 0x43361A: received_data (genl.c:506)
==5362== by 0x42FDC2: io_callback (io.c:120)
==5362== by 0x42EABE: l_main_run (main.c:381)
==5362== by 0x402F90: main (main.c:234)
This is used to get arbitrary information out of the EAP method. Needed
for EAP-WSC to signal credential information obtained from the peer.
Other uses include signaling why EAP-WSC failed (e.g. invalid PIN, etc)
and processing of M2D discovery messages. The information in M2Ds might
be useful to external clients.
We used to open a socket for each wireless interface. This patch uses a
single socket with an attached BPF to handle all EAPoL traffic via a
single file descriptor.
When parsing the EAPoL-Key key data field we don't strip the 0xdd /
0x00 padding from the decrypted data so there may be trailing padding
after the IE sequence and valgrind will report an invalid read of the
length byte. Same thing may happen if we're sent garbage.
When we send M5 & M7, we need to generate a random IV. For testing
purposes, the IV can be provided in settings, otherwise it will be
generated randomly.
We need quite a bit of attributes of M2 for the duration of the WSC
handshake. Most importantly, we need to use the peer's public key when
processing M4 and M6. RegistrarNonce is also needed for generating any
ACK/NACK messages as needed.
Also, peer's device attributes such as Model, Manufacturer, etc might be
useful to report upon successful handshake.
AuthKey is already uploaded into auth_key_hmac. KeyWrapKey is now
uploaded into the AES-CBC(128) cipher. We currently have no use for
EMSK.
So we no longer need to keep the wsc_session_key structure around.
Encrypted Settings TLVs are structured similarly to the various WSC
messages. However, they lack a version2 extension field and use a Key
Wrap Authenticator element instead of Authenticator.
DevicePassword is the PIN, either static, dynamically generated or
entered by the user. For PushButton mode, DevicePassword is set to
'00000000'. It can also be provided via external means, such as NFC.
This patch allows DevicePassword to be externally configured into the
EAP-WSC layer. Optionally, the secret nonce values can also be
provided for testing purposes. If omitted, they will be generated using
l_getrandom.
We use the load_settings method to bootstrap the internal state of the
EAP WSC state machine. We require certain information to be provided by
the higher layers, namely:
Global Device parameters
- Manufacturer
- Model Name
- Model Number
- Serial Number
- Device Name
- Primary Device Type
- OS Version
Session specific parameters
- MAC Address
- Configuration Methods
- RF Bands
The following parameters are auto-generated for each new session, but
can be over-ridden if desired
- Private Key
- Enrollee Nonce
Expanded EAP methods should get their packets for handling starting at
the op-code field. They're not really interested in
type/vendor-id/vendor-type fields.
Instead of one global protocol_version, we now store it inside eapol_sm.
This allows us to use the same protocol version for our response as the
request from the authenticator.
For unit tests where we had protocol version mismatches, a new method is
introduced to explicitly set the protocol version to use.
CMD_DISCONNECT fails on some occasions when CMD_CONNECT is still
running. When this happens the DBus disconnect command receives an
error reply but iwd's device state is left as disconnected even though
there's a connection at the kernel level which times out a few seconds
later. If the CMD_CONNECT is cancelled I couldn't reproduce this so far.
src/network.c:network_connect()
src/network.c:network_connect_psk()
src/network.c:network_connect_psk() psk:
69ae3f8b2f84a438cf6a44275913182dd2714510ccb8cbdf8da9dc8b61718560
src/network.c:network_connect_psk() len: 32
src/network.c:network_connect_psk() ask_psk: false
src/device.c:device_enter_state() Old State: disconnected, new state:
connecting
src/scan.c:scan_notify() Scan notification 33
src/device.c:device_netdev_event() Associating
src/netdev.c:netdev_mlme_notify() MLME notification 60
MLME notification is missing ifindex attribute
src/device.c:device_dbus_disconnect()
src/device.c:device_connect_cb() 6, result: 5
src/device.c:device_enter_state() Old State: connecting, new state:
disconnecting
src/device.c:device_disconnect_cb() 6, success: 0
src/device.c:device_enter_state() Old State: disconnecting, new state:
disconnected
src/scan.c:scan_notify() Scan notification 34
src/netdev.c:netdev_mlme_notify() MLME notification 19
src/netdev.c:netdev_mlme_notify() MLME notification 60
MLME notification is missing ifindex attribute
src/netdev.c:netdev_mlme_notify() MLME notification 37
src/netdev.c:netdev_authenticate_event()
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_done() get_scan_done
src/netdev.c:netdev_mlme_notify() MLME notification 60
MLME notification is missing ifindex attribute
src/netdev.c:netdev_mlme_notify() MLME notification 19
MLME notification is missing ifindex attribute
src/netdev.c:netdev_mlme_notify() MLME notification 38
src/netdev.c:netdev_associate_event()
src/netdev.c:netdev_mlme_notify() MLME notification 46
src/netdev.c:netdev_connect_event()
<delay>
src/netdev.c:netdev_mlme_notify() MLME notification 60
MLME notification is missing ifindex attribute
src/netdev.c:netdev_mlme_notify() MLME notification 20
MLME notification is missing ifindex attribute
src/netdev.c:netdev_mlme_notify() MLME notification 20
src/netdev.c:netdev_mlme_notify() MLME notification 39
src/netdev.c:netdev_deauthenticate_event()
This is to make sure device_remove and netdev_connect_free are called
early so we don't continue setting up a connection and don't let DBus
clients power device back up after we've called netdev_set_powered.
Calling device_disassociated inside disconnect_cb was mostly pointless.
Most attributes were already cleared by device_disconnect() when
initiating the disconnection procedure.
This patch also modifies the logic for triggering the autoconnect. If
the user initiated the disconnect call, then autoconnect should not be
triggered. If the disconnect was triggered by other means, then iwd
will still enter autoconnect mode.
All of the abortion logic is invoked when device_disconnect is called.
So there's no point calling device_disassociated in this case. This
also prevents us from entering into autoconnect mode too early.
Prevents situations like this:
src/device.c:device_enter_state() Old State: connecting, new state:
connected
src/scan.c:scan_periodic_stop() Stopping periodic scan for ifindex: 3
src/device.c:device_dbus_disconnect()
src/device.c:device_connect_cb() 3
src/device.c:device_disassociated() 3
src/device.c:device_enter_state() Old State: connected, new state:
autoconnect
Also, remove the check for device->state == DEVICE_STATE_CONNECTING.
device_connect_cb should always called when the state is CONNECTING.
If this is not so, it indicates a bug inside the netdev layer.
This was introduced by commit f468fceb02.
However, after commit 2d78f51fac66b9beff03a56f12e5fb8456625f07, the
connect_cb is called from inside netdev_disconnect. This in turn causes
the dbus-reply to be sent out if needed. So by the time we get to the
code in question, connect_pending is always NULL.
Try to make the connect and disconnect operations look more like a
transaction where the callback is always called eventually, also with a
clear indication if the operation is in profress. The connected state
lasts from the start of the connection attempt until the disconnect.
1. Non-null netdev->connected or disconnect_cb indicate that the operation
is active.
2. Every entry-point in netdev.c checks if connected is still set
before executing the next step of the connection setup. CMD_CONNECT and
the subsequent commands may succeed even if CMD_DISCONNECT is called
in the middle so they can't only rely on the error value for that.
3. netdev->connect_cb and other elements of the connection state are
reset by netdev_connect_free which groups the clean-up operations to
make sure we don't miss anything. Since the callback pointers are
reset device.c doesn't need to check that it receives a spurious
event in those callbacks for example after calling netdev_disconnect.
If initial bring up returns ERFKILL proceed and the inteface can be
explicitly brought up by the client once rfkill is disabled.
Also fix the error number returned to netdev_set_powered callback to be
negative as expected by netdev_initial_up_cb.
