linux: update nl80211.h to 4.20 kernel release

linux/nl80211.h

@@ -11,6 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
+ * Copyright (C) 2018 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -203,7 +204,8 @@
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
  * eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT.
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
  *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
  *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
  *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
@@ -214,7 +216,8 @@
  * as specified in IETF RFC 6696.
  *
  * When FILS shared key authentication is completed, driver needs to provide the
- * below additional parameters to userspace.
+ * below additional parameters to userspace, which can be either after setting
+ * up a connection or after roaming.
  *	%NL80211_ATTR_FILS_KEK - used for key renewal
  *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
  *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
@@ -978,18 +981,18 @@
  *	only the %NL80211_ATTR_IE data is used and updated with this command.
  *
  * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
- *	for the given authenticator address (specified with &NL80211_ATTR_MAC).
+ *	for the given authenticator address (specified with %NL80211_ATTR_MAC).
- *	When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
+ *	When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
  *	PMK-R0, otherwise it specifies the PMK.
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
- *	&NL80211_ATTR_MAC.
+ *	%NL80211_ATTR_MAC.
  * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
  *	handshake was completed successfully by the driver. The BSSID is
- *	specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ *	specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
  *	offload should send this event after indicating 802.11 association with
- *	&NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ *	%NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
- *	&NL80211_CMD_DISCONNECT should be indicated instead.
+ *	%NL80211_CMD_DISCONNECT should be indicated instead.
  *
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
@@ -1026,9 +1029,12 @@
  *	initiated the connection through the connect request.
  *
  * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
- *	ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
+ *	ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
- *	&NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
+ *	%NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
- *	address(specified in &NL80211_ATTR_MAC).
+ *	address(specified in %NL80211_ATTR_MAC).
+ *
+ * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
+ *	the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
@@ -1242,6 +1248,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_CONTROL_PORT_FRAME,
 
+	NL80211_CMD_GET_FTM_RESPONDER_STATS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2215,7 +2223,7 @@ enum nl80211_commands {
  * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
  *     authentication operation (u32 attribute with an
  *     &enum nl80211_external_auth_action value). This is used with the
- *     &NL80211_CMD_EXTERNAL_AUTH request event.
+ *     %NL80211_CMD_EXTERNAL_AUTH request event.
  * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
  *     space supports external authentication. This attribute shall be used
  *     only with %NL80211_CMD_CONNECT request. The driver may offload
@@ -2225,6 +2233,27 @@ enum nl80211_commands {
  * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
  *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
  *
+ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
+ *      nl80211_txq_stats)
+ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
+ *      The smaller of this and the memory limit is enforced.
+ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
+ *      TXQ queues for this phy. The smaller of this and the packet limit is
+ *      enforced.
+ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
+ *      a flow is assigned on each round of the DRR scheduler.
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION). Can be set
+ *	only if %NL80211_STA_FLAG_WME is set.
+ *
+ * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
+ *	in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
+ *	measurement (FTM) responder functionality and containing parameters as
+ *	possible, see &enum nl80211_ftm_responder_attr
+ *
+ * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
+ *	statistics, see &enum nl80211_ftm_responder_stats.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2659,6 +2688,17 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
 
+	NL80211_ATTR_TXQ_STATS,
+	NL80211_ATTR_TXQ_LIMIT,
+	NL80211_ATTR_TXQ_MEMORY_LIMIT,
+	NL80211_ATTR_TXQ_QUANTUM,
+
+	NL80211_ATTR_HE_CAPABILITY,
+
+	NL80211_ATTR_FTM_RESPONDER,
+
+	NL80211_ATTR_FTM_RESPONDER_STATS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2698,6 +2738,8 @@ enum nl80211_attrs {
 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
+#define NL80211_WIPHY_NAME_MAXLEN		64
+
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_HT_RATES		77
 #define NL80211_MAX_SUPP_REG_RULES		64
@@ -2706,7 +2748,8 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
 #define NL80211_HT_CAPABILITY_LEN		26
 #define NL80211_VHT_CAPABILITY_LEN		12
-
+#define NL80211_HE_MIN_CAPABILITY_LEN           16
+#define NL80211_HE_MAX_CAPABILITY_LEN           51
 #define NL80211_MAX_NR_CIPHER_SUITES		5
 #define NL80211_MAX_NR_AKM_SUITES		2
 
@@ -2833,6 +2876,38 @@ struct nl80211_sta_flag_update {
 	__u32 set;
 } __attribute__((packed));
 
+/**
+ * enum nl80211_he_gi - HE guard interval
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
+ */
+enum nl80211_he_gi {
+	NL80211_RATE_INFO_HE_GI_0_8,
+	NL80211_RATE_INFO_HE_GI_1_6,
+	NL80211_RATE_INFO_HE_GI_3_2,
+};
+
+/**
+ * enum nl80211_he_ru_alloc - HE RU allocation values
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
+ */
+enum nl80211_he_ru_alloc {
+	NL80211_RATE_INFO_HE_RU_ALLOC_26,
+	NL80211_RATE_INFO_HE_RU_ALLOC_52,
+	NL80211_RATE_INFO_HE_RU_ALLOC_106,
+	NL80211_RATE_INFO_HE_RU_ALLOC_242,
+	NL80211_RATE_INFO_HE_RU_ALLOC_484,
+	NL80211_RATE_INFO_HE_RU_ALLOC_996,
+	NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
+};
+
 /**
  * enum nl80211_rate_info - bitrate information
  *
@@ -2865,6 +2940,13 @@ struct nl80211_sta_flag_update {
  * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
  *	a legacy rate and will be reported as the actual bitrate, i.e.
  *	a quarter of the base (20 MHz) rate
+ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
+ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
+ *	(u8, see &enum nl80211_he_gi)
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
+ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -2881,6 +2963,11 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_160_MHZ_WIDTH,
 	NL80211_RATE_INFO_10_MHZ_WIDTH,
 	NL80211_RATE_INFO_5_MHZ_WIDTH,
+	NL80211_RATE_INFO_HE_MCS,
+	NL80211_RATE_INFO_HE_NSS,
+	NL80211_RATE_INFO_HE_GI,
+	NL80211_RATE_INFO_HE_DCM,
+	NL80211_RATE_INFO_HE_RU_ALLOC,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -2980,6 +3067,13 @@ enum nl80211_sta_bss_param {
  *	received from the station (u64, usec)
  * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
+ * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
+ * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
+ *	with an FCS error (u32, from this station). This count may not include
+ *	some packets with an FCS error due to TA corruption. Hence this counter
+ *	might not be fully accurate.
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -3019,12 +3113,19 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_RX_DURATION,
 	NL80211_STA_INFO_PAD,
 	NL80211_STA_INFO_ACK_SIGNAL,
+	NL80211_STA_INFO_ACK_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_MPDUS,
+	NL80211_STA_INFO_FCS_ERROR_COUNT,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
 	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
 };
 
+/* we renamed this - stay compatible */
+#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
+
+
 /**
  * enum nl80211_tid_stats - per TID statistics attributes
  * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
@@ -3036,6 +3137,7 @@ enum nl80211_sta_info {
  * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
  *	MSDUs (u64)
  * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
  * @NUM_NL80211_TID_STATS: number of attributes here
  * @NL80211_TID_STATS_MAX: highest numbered attribute here
  */
@@ -3046,12 +3148,51 @@ enum nl80211_tid_stats {
 	NL80211_TID_STATS_TX_MSDU_RETRIES,
 	NL80211_TID_STATS_TX_MSDU_FAILED,
 	NL80211_TID_STATS_PAD,
+	NL80211_TID_STATS_TXQ_STATS,
 
 	/* keep last */
 	NUM_NL80211_TID_STATS,
 	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
 };
 
+/**
+ * enum nl80211_txq_stats - per TXQ statistics attributes
+ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
+ * @NUM_NL80211_TXQ_STATS: number of attributes here
+ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
+ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
+ *      backlogged
+ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
+ * @NL80211_TXQ_STATS_DROPS: total number of packet drops
+ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
+ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
+ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
+ *      (only for per-phy stats)
+ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
+ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
+ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
+ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
+ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_txq_stats {
+	__NL80211_TXQ_STATS_INVALID,
+	NL80211_TXQ_STATS_BACKLOG_BYTES,
+	NL80211_TXQ_STATS_BACKLOG_PACKETS,
+	NL80211_TXQ_STATS_FLOWS,
+	NL80211_TXQ_STATS_DROPS,
+	NL80211_TXQ_STATS_ECN_MARKS,
+	NL80211_TXQ_STATS_OVERLIMIT,
+	NL80211_TXQ_STATS_OVERMEMORY,
+	NL80211_TXQ_STATS_COLLISIONS,
+	NL80211_TXQ_STATS_TX_BYTES,
+	NL80211_TXQ_STATS_TX_PACKETS,
+	NL80211_TXQ_STATS_MAX_FLOWS,
+
+	/* keep last */
+	NUM_NL80211_TXQ_STATS,
+	NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
+};
+
 /**
  * enum nl80211_mpath_flags - nl80211 mesh path flags
  *
@@ -3103,6 +3244,38 @@ enum nl80211_mpath_info {
 	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_band_iftype_attr - Interface type data attributes
+ *
+ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
+ *     for each interface type that supports the band data
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
+ *     defined in HE capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
+ *     defined
+ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_iftype_attr {
+	__NL80211_BAND_IFTYPE_ATTR_INVALID,
+
+	NL80211_BAND_IFTYPE_ATTR_IFTYPES,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+
+	/* keep last */
+	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
+	NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
+};
+
 /**
  * enum nl80211_band_attr - band attributes
  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
@@ -3118,6 +3291,8 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
  *	defined in 802.11ac
  * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
+ *	attributes from &enum nl80211_band_iftype_attr
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -3133,6 +3308,7 @@ enum nl80211_band_attr {
 
 	NL80211_BAND_ATTR_VHT_MCS_SET,
 	NL80211_BAND_ATTR_VHT_CAPA,
+	NL80211_BAND_ATTR_IFTYPE_DATA,
 
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
@@ -3141,6 +3317,29 @@ enum nl80211_band_attr {
 
 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
 
+/**
+ * enum nl80211_wmm_rule - regulatory wmm rule
+ *
+ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
+ * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
+ * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
+ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
+ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
+ * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @__NL80211_WMMR_LAST: Internal use.
+ */
+enum nl80211_wmm_rule {
+	__NL80211_WMMR_INVALID,
+	NL80211_WMMR_CW_MIN,
+	NL80211_WMMR_CW_MAX,
+	NL80211_WMMR_AIFSN,
+	NL80211_WMMR_TXOP,
+
+	/* keep last */
+	__NL80211_WMMR_LAST,
+	NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
+};
+
 /**
  * enum nl80211_frequency_attr - frequency attributes
  * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
@@ -3190,6 +3389,9 @@ enum nl80211_band_attr {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
  *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
+ *	This is a nested attribute that contains the wmm limitation per AC.
+ *	(see &enum nl80211_wmm_rule)
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3218,6 +3420,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
+	NL80211_FREQUENCY_ATTR_WMM,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -3401,7 +3604,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -4163,7 +4366,7 @@ enum nl80211_txrate_gi {
  * enum nl80211_band - Frequency band
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
  * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
  *	since newer kernel versions may support more bands
  */
@@ -5038,6 +5241,22 @@ enum nl80211_feature_flags {
  *	"radar detected" event.
  * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
  *	receiving control port frames over nl80211 instead of the netdevice.
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
+ *	(average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
+ *      TXQs.
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
+ *	SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
+ *	except for supported rates from the probe request content if requested
+ *	by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
+ * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
+ *	timing measurement responder role.
+ *
+ * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
+ *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys
+ *      if this flag is not set. Ignoring this can leak clear text packets and/or
+ *      freeze the connection.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5070,6 +5289,14 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
 	NL80211_EXT_FEATURE_DFS_OFFLOAD,
 	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
+	NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+	/* we renamed this - stay compatible */
+	NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+	NL80211_EXT_FEATURE_TXQS,
+	NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
+	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+	NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
+	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5175,6 +5402,12 @@ enum nl80211_timeout_reason {
  *	possible scan results. This flag hints the driver to use the best
  *	possible scan configuration to improve the accuracy in scanning.
  *	Latency and power use may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
+ *	request frames from this scan to avoid correlation/tracking being
+ *	possible.
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
+ *	only have supported rates and no additional capabilities (unless
+ *	added by userspace explicitly.)
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5188,6 +5421,8 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
 	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
 	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
+	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
+	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
 };
 
 /**
@@ -5546,11 +5781,11 @@ enum nl80211_nan_func_attributes {
  * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
  *	This is a flag.
  * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
- *	&NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ *	%NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
  * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
- *	&NL80211_NAN_SRF_BF is present. This is a u8.
+ *	%NL80211_NAN_SRF_BF is present. This is a u8.
  * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
- *	and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
+ *	and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
  *	attribute. Each nested attribute is a MAC address.
  * @NUM_NL80211_NAN_SRF_ATTR: internal
  * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
@@ -5601,4 +5836,74 @@ enum nl80211_external_auth_action {
 	NL80211_EXTERNAL_AUTH_ABORT,
 };
 
+/**
+ * enum nl80211_ftm_responder_attributes - fine timing measurement
+ *	responder attributes
+ * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
+ * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
+ * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
+ *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10)
+ * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13)
+ * @__NL80211_FTM_RESP_ATTR_LAST: Internal
+ * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
+ */
+enum nl80211_ftm_responder_attributes {
+	__NL80211_FTM_RESP_ATTR_INVALID,
+
+	NL80211_FTM_RESP_ATTR_ENABLED,
+	NL80211_FTM_RESP_ATTR_LCI,
+	NL80211_FTM_RESP_ATTR_CIVICLOC,
+
+	/* keep last */
+	__NL80211_FTM_RESP_ATTR_LAST,
+	NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
+};
+
+/*
+ * enum nl80211_ftm_responder_stats - FTM responder statistics
+ *
+ * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
+ * when getting FTM responder statistics.
+ *
+ * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
+ *	were ssfully answered (u32)
+ * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
+ *	frames were successfully answered (u32)
+ * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
+ * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
+ * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
+ * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
+ *	indication of how much time the responder was busy (u64, msec)
+ * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
+ *	triggers from initiators that didn't finish successfully the negotiation
+ *	phase with the responder (u32)
+ * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
+ *	- initiator asks for a new scheduling although it already has scheduled
+ *	FTM slot (u32)
+ * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
+ *	scheduled window (u32)
+ * @NL80211_FTM_STATS_PAD: used for padding, ignore
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
+ */
+enum nl80211_ftm_responder_stats {
+	__NL80211_FTM_STATS_INVALID,
+	NL80211_FTM_STATS_SUCCESS_NUM,
+	NL80211_FTM_STATS_PARTIAL_NUM,
+	NL80211_FTM_STATS_FAILED_NUM,
+	NL80211_FTM_STATS_ASAP_NUM,
+	NL80211_FTM_STATS_NON_ASAP_NUM,
+	NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
+	NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
+	NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
+	NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
+	NL80211_FTM_STATS_PAD,
+
+	/* keep last */
+	__NL80211_FTM_STATS_AFTER_LAST,
+	NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */