diff --git a/linux/nl80211.h b/linux/nl80211.h index f962c06e..c32e7616 100644 --- a/linux/nl80211.h +++ b/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2020 Intel Corporation + * Copyright (C) 2018-2022 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -300,6 +300,40 @@ * the interface goes down. */ +/** + * DOC: FILS shared key crypto offload + * + * This feature is applicable to drivers running in AP mode. + * + * FILS shared key crypto offload can be advertised by drivers by setting + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support + * FILS shared key crypto offload should be able to encrypt and decrypt + * association frames for FILS shared key authentication as per IEEE 802.11ai. + * With this capability, for FILS key derivation, drivers depend on userspace. + * + * After FILS key derivation, userspace shares the FILS AAD details with the + * driver and the driver stores the same to use in decryption of association + * request and in encryption of association response. The below parameters + * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. + * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA + * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption + * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * Once the association is done, the driver cleans the FILS AAD data. + */ + +/** + * DOC: Multi-Link Operation + * + * In Multi-Link Operation, a connection between to MLDs utilizes multiple + * links. To use this in nl80211, various commands and responses now need + * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. + * Additionally, various commands that need to operate on a specific link + * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to + * use %NL80211_CMD_START_AP or similar functions. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -337,17 +371,28 @@ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from * userspace to request deletion of a virtual interface, then requires - * attribute %NL80211_ATTR_IFINDEX. + * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are + * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, + * and if this command is used for the transmitting interface, then all + * the non-transmitting interfaces are deleted as well. * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC + * represents peer's MLD address for MLO pairwise key. For MLO group key, + * the link is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * For MLO connection, the link to set default key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. + * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents + * peer's MLD address for MLO pairwise key. The link to add MLO + * group key is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. + * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address + * for MLO pairwise key. The link to delete group key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * * @NL80211_CMD_GET_BEACON: (not used) * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface @@ -727,6 +772,13 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. This command is @@ -737,7 +789,9 @@ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. * @@ -1082,6 +1136,12 @@ * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame @@ -1185,6 +1245,42 @@ * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to * specify the wiphy index to be applied to. * + * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever + * mac80211/drv detects a bss color collision. + * + * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that + * userspace wants to change the BSS color. + * + * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has + * started + * + * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has + * been aborted + * + * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change + * has completed + * + * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - + * &NL80211_ATTR_MAC - for STA MAC address + * &NL80211_ATTR_FILS_KEK - for KEK + * &NL80211_ATTR_FILS_NONCES - for FILS Nonces + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * @NL80211_CMD_ASSOC_COMEBACK: notification about an association + * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC + * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to + * specify the timeout value. + * + * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The + * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. + * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come + * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links + * in preparation for e.g. roaming to a regular (non-MLO) AP. + * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1417,6 +1513,25 @@ enum nl80211_commands { NL80211_CMD_SET_SAR_SPECS, + NL80211_CMD_OBSS_COLOR_COLLISION, + + NL80211_CMD_COLOR_CHANGE_REQUEST, + + NL80211_CMD_COLOR_CHANGE_STARTED, + NL80211_CMD_COLOR_CHANGE_ABORTED, + NL80211_CMD_COLOR_CHANGE_COMPLETED, + + NL80211_CMD_SET_FILS_AAD, + + NL80211_CMD_ASSOC_COMEBACK, + + NL80211_CMD_ADD_LINK, + NL80211_CMD_REMOVE_LINK, + + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2276,8 +2391,10 @@ enum nl80211_commands { * * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, - * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per - * interface type. + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. * * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO * groupID for monitor mode. @@ -2413,7 +2530,9 @@ enum nl80211_commands { * space supports external authentication. This attribute shall be used * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver * may offload authentication processing to user space if this capability - * is indicated in the respective requests from the user space. + * is indicated in the respective requests from the user space. (This flag + * attribute deprecated for %NL80211_CMD_START_AP, use + * %NL80211_ATTR_AP_SETTINGS_FLAGS) * * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. @@ -2560,6 +2679,76 @@ enum nl80211_commands { * disassoc events to indicate that an immediate reconnect to the AP * is desired. * + * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the + * %NL80211_CMD_OBSS_COLOR_COLLISION event. + * + * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's + * until the color switch event. + * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are + * switching to + * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE + * information for the time while performing a color switch. + * + * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID + * advertisements (MBSSID) parameters in AP mode. + * Kernel uses this attribute to indicate the driver's support for MBSSID + * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. + * Userspace should use this attribute to configure per interface MBSSID + * parameters. + * See &enum nl80211_mbssid_config_attributes for details. + * + * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. + * Mandatory parameter for the transmitting interface to enable MBSSID. + * Optional for the non-transmitting interfaces. + * + * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain + * available for radar/CAC detection on some hw. This chain can't be used + * to transmit or receive frames and it is bounded to a running wdev. + * Background radar/CAC detection allows to avoid the CAC downtime + * switching on a different channel during CAC detection on the selected + * radar channel. + * + * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, + * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be + * used with %NL80211_CMD_START_AP request. + * + * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with + * various commands that need a link ID to operate. + * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some + * per-link information and a link ID. + * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as + * authenticate/associate. + * + * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO + * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not + * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. + * + * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of + * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this + * attribute is not present userspace shall consider maximum number of AKM + * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum + * number prior to the introduction of this attribute. + * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3057,6 +3246,37 @@ enum nl80211_attrs { NL80211_ATTR_DISABLE_HE, + NL80211_ATTR_OBSS_COLOR_BITMAP, + + NL80211_ATTR_COLOR_CHANGE_COUNT, + NL80211_ATTR_COLOR_CHANGE_COLOR, + NL80211_ATTR_COLOR_CHANGE_ELEMS, + + NL80211_ATTR_MBSSID_CONFIG, + NL80211_ATTR_MBSSID_ELEMS, + + NL80211_ATTR_RADAR_BACKGROUND, + + NL80211_ATTR_AP_SETTINGS_FLAGS, + + NL80211_ATTR_EHT_CAPABILITY, + + NL80211_ATTR_DISABLE_EHT, + + NL80211_ATTR_MLO_LINKS, + NL80211_ATTR_MLO_LINK_ID, + NL80211_ATTR_MLD_ADDR, + + NL80211_ATTR_MLO_SUPPORT, + + NL80211_ATTR_MAX_NUM_AKM_SUITES, + + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3111,7 +3331,14 @@ enum nl80211_attrs { #define NL80211_HE_MIN_CAPABILITY_LEN 16 #define NL80211_HE_MAX_CAPABILITY_LEN 54 #define NL80211_MAX_NR_CIPHER_SUITES 5 + +/* + * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES + * present in %NL80211_CMD_GET_WIPHY response. + */ #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_EHT_MIN_CAPABILITY_LEN 13 +#define NL80211_EHT_MAX_CAPABILITY_LEN 51 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 @@ -3139,7 +3366,7 @@ enum nl80211_attrs { * and therefore can't be created in the normal ways, use the * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE * commands to create and destroy one - * @NL80211_IF_TYPE_OCB: Outside Context of a BSS + * @NL80211_IFTYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined @@ -3280,6 +3507,56 @@ enum nl80211_he_ru_alloc { NL80211_RATE_INFO_HE_RU_ALLOC_2x996, }; +/** + * enum nl80211_eht_gi - EHT guard interval + * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec + */ +enum nl80211_eht_gi { + NL80211_RATE_INFO_EHT_GI_0_8, + NL80211_RATE_INFO_EHT_GI_1_6, + NL80211_RATE_INFO_EHT_GI_3_2, +}; + +/** + * enum nl80211_eht_ru_alloc - EHT RU allocation values + * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation + */ +enum nl80211_eht_ru_alloc { + NL80211_RATE_INFO_EHT_RU_ALLOC_26, + NL80211_RATE_INFO_EHT_RU_ALLOC_52, + NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_106, + NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_242, + NL80211_RATE_INFO_EHT_RU_ALLOC_484, + NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_996, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, +}; + /** * enum nl80211_rate_info - bitrate information * @@ -3319,6 +3596,13 @@ enum nl80211_he_ru_alloc { * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate + * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) + * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) + * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier + * (u8, see &enum nl80211_eht_gi) + * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3340,6 +3624,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_HE_GI, NL80211_RATE_INFO_HE_DCM, NL80211_RATE_INFO_HE_RU_ALLOC, + NL80211_RATE_INFO_320_MHZ_WIDTH, + NL80211_RATE_INFO_EHT_MCS, + NL80211_RATE_INFO_EHT_NSS, + NL80211_RATE_INFO_EHT_GI, + NL80211_RATE_INFO_EHT_RU_ALLOC, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -3650,11 +3939,20 @@ enum nl80211_mpath_info { * capabilities IE * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), * given for all 6 GHz band channels + * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are + * advertised on this band/for this iftype (binary) + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as + * defined in EHT capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ enum nl80211_band_iftype_attr { __NL80211_BAND_IFTYPE_ATTR_INVALID, @@ -3665,6 +3963,11 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, + NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -3809,6 +4112,10 @@ enum nl80211_wmm_rule { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible + * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel + * in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3845,6 +4152,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_4MHZ, NL80211_FREQUENCY_ATTR_8MHZ, NL80211_FREQUENCY_ATTR_16MHZ, + NL80211_FREQUENCY_ATTR_NO_320MHZ, + NL80211_FREQUENCY_ATTR_NO_EHT, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4043,6 +4352,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed * @NL80211_RRF_NO_HE: HE operation not allowed + * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4061,6 +4371,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, NL80211_RRF_NO_HE = 1<<17, + NL80211_RRF_NO_320MHZ = 1<<18, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4558,6 +4869,8 @@ enum nl80211_key_mode { * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel + * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4573,6 +4886,7 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_4, NL80211_CHAN_WIDTH_8, NL80211_CHAN_WIDTH_16, + NL80211_CHAN_WIDTH_320, }; /** @@ -4644,6 +4958,8 @@ enum nl80211_bss_scan_width { * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). + * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4669,6 +4985,8 @@ enum nl80211_bss { NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, NL80211_BSS_FREQUENCY_OFFSET, + NL80211_BSS_MLO_LINK_ID, + NL80211_BSS_MLD_ADDR, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4887,6 +5205,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs + * @NL80211_BAND_LC: light communication band (placeholder) * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4896,6 +5215,7 @@ enum nl80211_band { NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, NL80211_BAND_S1GHZ, + NL80211_BAND_LC, NUM_NL80211_BANDS, }; @@ -5462,7 +5782,7 @@ enum nl80211_iface_limit_attrs { * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels + * => allows two STAs on the same or on different channels * * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces @@ -5507,7 +5827,7 @@ enum nl80211_if_combination_attrs { * @NL80211_PLINK_ESTAB: mesh peer link is established * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded + * plink are discarded, except for authentication frames * @NUM_NL80211_PLINK_STATES: number of peer link states * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states */ @@ -5644,13 +5964,15 @@ enum nl80211_tdls_operation { NL80211_TDLS_DISABLE_LINK, }; -/* +/** * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. -enum nl80211_ap_sme_features { -}; + * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver + * when user space indicates support for SA Query procedures offload during + * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. */ +enum nl80211_ap_sme_features { + NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, +}; /** * enum nl80211_feature_flags - device/driver features @@ -5661,7 +5983,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from + * to work properly to support receiving regulatory hints from * cellular base stations. * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only * here to reserve the value for API/ABI compatibility) @@ -5950,6 +6272,25 @@ enum nl80211_feature_flags { * frame protection for all management frames exchanged during the * negotiation and range measurement procedure. * + * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision + * detection and change announcemnts. + * + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports + * FILS encryption and decryption for (Re)Association Request and Response + * frames. Userspace has to share FILS AAD details to the driver by using + * @NL80211_CMD_SET_FILS_AAD. + * + * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC + * detection. + * + * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address + * change without having to bring the underlying network device down + * first. For example, in station mode this can be used to vary the + * origin MAC address prior to a connection to a new AP for privacy + * or other reasons. Note that certain driver specific restrictions + * might apply, e.g. no scans in progress, no offchannel operations + * in progress, and no active connections. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6014,6 +6355,10 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SECURE_LTF, NL80211_EXT_FEATURE_SECURE_RTT, NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, + NL80211_EXT_FEATURE_BSS_COLOR, + NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, + NL80211_EXT_FEATURE_RADAR_BACKGROUND, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6912,6 +7257,9 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the + * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -6931,6 +7279,7 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, + NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -7299,4 +7648,76 @@ enum nl80211_sar_specs_attrs { NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, }; +/** + * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced + * multi-BSSID advertisements (EMA) in AP mode. + * Kernel uses some of these attributes to advertise driver's support for + * MBSSID and EMA. + * Remaining attributes should be used by the userspace to configure the + * features. + * + * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise + * the maximum number of MBSSID interfaces supported by the driver. + * Driver should indicate MBSSID support by setting + * wiphy->mbssid_max_interfaces to a value more than or equal to 2. + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel + * to advertise the maximum profile periodicity supported by the driver + * if EMA is enabled. Driver should indicate EMA support to the userspace + * by setting wiphy->ema_max_profile_periodicity to + * a non-zero value. + * + * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of + * this BSS (u8) in the multiple BSSID set. + * Value must be set to 0 for the transmitting interface and non-zero for + * all non-transmitting interfaces. The userspace will be responsible + * for using unique indices for the interfaces. + * Range: 0 to wiphy->mbssid_max_interfaces-1. + * + * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for + * a non-transmitted profile which provides the interface index (u32) of + * the transmitted profile. The value must match one of the interface + * indices advertised by the kernel. Optional if the interface being set up + * is the transmitting one, however, if provided then the value must match + * the interface index of the same. + * + * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. + * Setting this flag is permitted only if the driver advertises EMA support + * by setting wiphy->ema_max_profile_periodicity to non-zero. + * + * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal + * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute + */ +enum nl80211_mbssid_config_attributes { + __NL80211_MBSSID_CONFIG_ATTR_INVALID, + + NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, + NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, + NL80211_MBSSID_CONFIG_ATTR_INDEX, + NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, + NL80211_MBSSID_CONFIG_ATTR_EMA, + + /* keep last */ + __NL80211_MBSSID_CONFIG_ATTR_LAST, + NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, +}; + +/** + * enum nl80211_ap_settings_flags - AP settings flags + * + * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external + * authentication. + * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query + * procedures offload to driver. If driver advertises + * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall + * ignore SA Query procedures and validations when this flag is set by + * userspace. + */ +enum nl80211_ap_settings_flags { + NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, + NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, +}; + #endif /* __LINUX_NL80211_H */