auto-t: modify PSK-roam test to use FT failure path

This adds another radio so IWD hits the FT failure path after
authentication to the first BSS fails. This causes a wiphy work
item to be rescheduled which previously was unsafe.

autotests/testPSK-roam/connection_test.py

@@ -48,7 +48,7 @@ class Test(unittest.TestCase):
             self.rule2.enabled = True
             # Send 100 packets (to be dropped), should trigger beacon loss
             testutil.tx_packets(device.name, self.bss_hostapd[0].ifname, 100)
-            device.wait_for_event('packet-loss-roam', timeout=30)
+            device.wait_for_event('packet-loss-roam', timeout=60)
         else:
             device.roam(self.bss_hostapd[1].bssid)
 
@@ -173,19 +173,22 @@ class Test(unittest.TestCase):
         IWD.copy_to_storage('TestFT.psk')
 
         cls.bss_hostapd = [ HostapdCLI(config='ft-psk-ccmp-1.conf'),
-                            HostapdCLI(config='ft-psk-ccmp-2.conf') ]
+                            HostapdCLI(config='ft-psk-ccmp-2.conf'),
+                            HostapdCLI(config='ft-psk-ccmp-3.conf') ]
+        cls.bss_hostapd[2].disable()
+
         rad0 = hwsim.get_radio('rad0')
-        rad2 = hwsim.get_radio('rad2')
+        rad3 = hwsim.get_radio('rad3')
 
         cls.rule0 = hwsim.rules.create()
-        cls.rule0.source = rad2.addresses[0]
+        cls.rule0.source = rad3.addresses[0]
         cls.rule0.bidirectional = True
         cls.rule0.signal = -2000
         cls.rule0.prefix = 'b0'
         cls.rule0.drop = True
 
         cls.rule1 = hwsim.rules.create()
-        cls.rule1.source = rad2.addresses[0]
+        cls.rule1.source = rad3.addresses[0]
         cls.rule1.prefix = '08'
         cls.rule1.drop = True
 

autotests/testPSK-roam/failed_roam_test.py

@@ -62,21 +62,17 @@ class Test(unittest.TestCase):
 
         self.rule0.enabled = True
 
-        device.roam(self.bss_hostapd[1].bssid)
+        # IWD should connect, then attempt a roam to BSS 1, which should fail...
-
+        device.wait_for_event('ft-roam-failed', timeout=60)
-        # Roam should fail...
-        device.wait_for_event('ft-roam-failed')
         # ... but IWD should remain connected
         self.assertTrue(device.state == DeviceState.connected)
 
         self.rule0.enabled = False
 
-        # Try again once more
+        # IWD should then try BSS 2, and succeed
-        device.roam(self.bss_hostapd[1].bssid)
+        self.verify_roam(wd, device, self.bss_hostapd[0], self.bss_hostapd[2])
 
-        self.verify_roam(wd, device, self.bss_hostapd[0], self.bss_hostapd[1])
+        self.bss_hostapd[2].deauthenticate(device.address)
-
-        self.bss_hostapd[1].deauthenticate(device.address)
         condition = 'obj.state == DeviceState.disconnected'
         wd.wait_for_object_condition(device, condition)
 
@@ -88,6 +84,7 @@ class Test(unittest.TestCase):
 
         self.rule0.enabled = False
         self.rule1.enabled = False
+        self.rule2.enabled = False
 
     @classmethod
     def setUpClass(cls):
@@ -96,14 +93,16 @@ class Test(unittest.TestCase):
         IWD.copy_to_storage('TestFT.psk')
 
         cls.bss_hostapd = [ HostapdCLI(config='ft-psk-ccmp-1.conf'),
-                            HostapdCLI(config='ft-psk-ccmp-2.conf') ]
+                            HostapdCLI(config='ft-psk-ccmp-2.conf'),
+                            HostapdCLI(config='ft-psk-ccmp-3.conf') ]
 
         cls.bss_hostapd[0].set_address('12:00:00:00:00:01')
         cls.bss_hostapd[1].set_address('12:00:00:00:00:02')
+        cls.bss_hostapd[2].set_address('12:00:00:00:00:03')
 
         # Drop Authenticate frames
         cls.rule0 = hwsim.rules.create()
-        cls.rule0.bidirectional = True
+        cls.rule0.source = hwsim.get_radio('rad1').addresses[0]
         cls.rule0.prefix = 'b0'
         cls.rule0.drop = True
 
@@ -113,6 +112,18 @@ class Test(unittest.TestCase):
         cls.rule1.prefix = 'd0'
         cls.rule1.drop = True
 
+        # Causes IWD to immediately roam away from BSS 0
+        cls.rule2 = hwsim.rules.create()
+        cls.rule2.source = hwsim.get_radio('rad0').addresses[0]
+        cls.rule2.signal = -8000
+        cls.rule2.enabled = True
+
+        # Causes IWD to first prefer BSS 1 to roam, then BSS 2.
+        cls.rule3 = hwsim.rules.create()
+        cls.rule3.source = hwsim.get_radio('rad2').addresses[0]
+        cls.rule3.signal = -7000
+        cls.rule3.enabled = True
+
     @classmethod
     def tearDownClass(cls):
         IWD.clear_storage()

autotests/testPSK-roam/ft-psk-ccmp-3.conf

@@ -0,0 +1,39 @@
+hw_mode=g
+channel=2
+ssid=TestFT
+utf8_ssid=1
+ctrl_interface=/var/run/hostapd
+
+r1_key_holder=120000000002
+nas_identifier=dummy2
+
+wpa=2
+# Can support WPA-PSK and FT-PSK (space separated list) and/or EAP at the same
+# time but we want to force FT
+wpa_key_mgmt=FT-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=EasilyGuessedPassword
+ieee80211w=1
+rsn_preauth=1
+rsn_preauth_interfaces=lo
+disable_pmksa_caching=0
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+okc=1
+mobility_domain=1234
+reassociation_deadline=60000
+r0kh=12:00:00:00:00:01 dummy1 000102030405060708090a0b0c0d0e0f
+r0kh=12:00:00:00:00:02 dummy2 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:01 00:00:00:00:00:01 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:02 00:00:00:00:00:02 000102030405060708090a0b0c0d0e0f
+# Push mode only needed for 8021x, not PSK mode since msk already known
+pmk_r1_push=0
+# Allow locally generated FT response so we don't have to configure push/pull
+# between BSSes running as separate hostapd processes as in the test-runner
+# case.  Only works with FT-PSK, otherwise brctl needs to be installed and
+# CONFIG_BRIDGE enabled in the kernel.
+ft_psk_generate_local=1
+ft_over_ds=0
+ap_table_expiration_time=36000
+ap_table_max_size=10
+rrm_neighbor_report=1

autotests/testPSK-roam/hw.conf

@@ -1,8 +1,9 @@
 [SETUP]
-num_radios=3
+num_radios=4
 start_iwd=0
 hwsim_medium=yes
 
 [HOSTAPD]
 rad0=ft-psk-ccmp-1.conf
 rad1=ft-psk-ccmp-2.conf
+rad2=ft-psk-ccmp-3.conf

autotests/testPSK-roam/roam_ap_disconnect_test.py

@@ -70,8 +70,10 @@ class Test(unittest.TestCase):
         IWD.copy_to_storage('TestFT.psk')
 
         cls.bss_hostapd = [ HostapdCLI(config='ft-psk-ccmp-1.conf'),
-                            HostapdCLI(config='ft-psk-ccmp-2.conf') ]
+                            HostapdCLI(config='ft-psk-ccmp-2.conf'),
+                            HostapdCLI(config='ft-psk-ccmp-3.conf') ]
         cls.bss_hostapd[1].disable()
+        cls.bss_hostapd[2].disable()
 
         cls.bss_hostapd[0].set_value('ocv', '0')
         cls.bss_hostapd[0].set_value('ieee80211w', '0')