auto-t: add tests for AP roam blacklisting

autotests/testAPRoam/connection_test.py

@@ -11,52 +11,58 @@ from iwd import NetworkType
 from hostapd import HostapdCLI
 
 class Test(unittest.TestCase):
-
-    def validate(self, expect_roam=True):
-        wd = IWD()
-
-        devices = wd.list_devices(1)
-        device = devices[0]
-
-        ordered_network = device.get_ordered_network('TestAPRoam')
+    def initial_connection(self):
+        ordered_network = self.device.get_ordered_network('TestAPRoam')
 
         self.assertEqual(ordered_network.type, NetworkType.psk)
 
         condition = 'not obj.connected'
-        wd.wait_for_object_condition(ordered_network.network_object, condition)
+        self.wd.wait_for_object_condition(ordered_network.network_object, condition)
 
-        device.connect_bssid(self.bss_hostapd[0].bssid)
+        self.device.connect_bssid(self.bss_hostapd[0].bssid)
 
         condition = 'obj.state == DeviceState.connected'
-        wd.wait_for_object_condition(device, condition)
+        self.wd.wait_for_object_condition(self.device, condition)
 
         self.bss_hostapd[0].wait_for_event('AP-STA-CONNECTED')
 
         self.assertFalse(self.bss_hostapd[1].list_sta())
 
-        self.bss_hostapd[0].send_bss_transition(device.address,
-                [(self.bss_hostapd[1].bssid, '8f0000005102060603000000')],
+    def validate_roam(self, from_bss, to_bss, expect_roam=True):
+        from_bss.send_bss_transition(self.device.address,
+                self.neighbor_list,
                 disassoc_imminent=expect_roam)
 
         if expect_roam:
             from_condition = 'obj.state == DeviceState.roaming'
             to_condition = 'obj.state == DeviceState.connected'
-            wd.wait_for_object_change(device, from_condition, to_condition)
+            self.wd.wait_for_object_change(self.device, from_condition, to_condition)
 
-            self.bss_hostapd[1].wait_for_event('AP-STA-CONNECTED %s' % device.address)
+            to_bss.wait_for_event('AP-STA-CONNECTED %s' % self.device.address)
         else:
-            device.wait_for_event("no-roam-candidates")
-
-        device.disconnect()
-
-        condition = 'not obj.connected'
-        wd.wait_for_object_condition(ordered_network.network_object, condition)
+            self.device.wait_for_event("no-roam-candidates")
 
     def test_disassoc_imminent(self):
-        self.validate(expect_roam=True)
+        self.initial_connection()
+        self.validate_roam(self.bss_hostapd[0], self.bss_hostapd[1])
 
     def test_no_candidates(self):
-        self.validate(expect_roam=False)
+        self.initial_connection()
+        # We now have BSS0 roam blacklisted
+        self.validate_roam(self.bss_hostapd[0], self.bss_hostapd[1])
+        # Try and trigger another roam back, which shouldn't happen since now
+        # both BSS's are roam blacklisted
+        self.validate_roam(self.bss_hostapd[1], self.bss_hostapd[0], expect_roam=False)
+
+    def setUp(self):
+        self.wd = IWD(True)
+
+        devices = self.wd.list_devices(1)
+        self.device = devices[0]
+
+    def tearDown(self):
+        self.wd = None
+        self.device = None
 
     @classmethod
     def setUpClass(cls):
@@ -65,6 +71,10 @@ class Test(unittest.TestCase):
         cls.bss_hostapd = [ HostapdCLI(config='ssid1.conf'),
                             HostapdCLI(config='ssid2.conf'),
                             HostapdCLI(config='ssid3.conf') ]
+        cls.neighbor_list = [
+            (cls.bss_hostapd[0].bssid, "8f0000005101060603000000"),
+            (cls.bss_hostapd[1].bssid, "8f0000005102060603000000"),
+        ]
 
     @classmethod
     def tearDownClass(cls):

autotests/testAPRoam/hw.conf

@@ -1,5 +1,7 @@
 [SETUP]
 num_radios=4
+hwsim_medium=true
+start_iwd=false
 
 [HOSTAPD]
 rad0=ssid1.conf

autotests/testAPRoam/main.conf.roaming

@@ -0,0 +1,6 @@
+[General]
+RoamThreshold=-72
+CriticalRoamThreshold=-72
+
+[Blacklist]
+InitialRoamRequestedTimeout=20

autotests/testAPRoam/roam_blacklist_test.py

@@ -0,0 +1,183 @@
+#!/usr/bin/python3
+
+import unittest
+import sys
+
+sys.path.append('../util')
+import iwd
+from iwd import IWD, IWD_CONFIG_DIR
+from iwd import NetworkType
+
+from hostapd import HostapdCLI
+from hwsim import Hwsim
+
+class Test(unittest.TestCase):
+    def validate_connected(self, hostapd):
+        ordered_network = self.device.get_ordered_network('TestAPRoam')
+
+        self.assertEqual(ordered_network.type, NetworkType.psk)
+
+        condition = 'not obj.connected'
+        self.wd.wait_for_object_condition(ordered_network.network_object, condition)
+
+        self.device.connect_bssid(hostapd.bssid)
+
+        condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_condition(self.device, condition)
+
+        hostapd.wait_for_event('AP-STA-CONNECTED')
+
+    def validate_ap_roamed(self, from_hostapd, to_hostapd):
+        from_hostapd.send_bss_transition(
+            self.device.address, self.neighbor_list, disassoc_imminent=True
+        )
+
+        from_condition = 'obj.state == DeviceState.roaming'
+        to_condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_change(self.device, from_condition, to_condition)
+
+        to_hostapd.wait_for_event('AP-STA-CONNECTED %s' % self.device.address)
+
+        self.device.wait_for_event("ap-roam-blacklist-added")
+
+    def test_roam_to_optimal_candidates(self):
+        # In this test IWD will naturally transition down the list after each
+        # BSS gets roam blacklisted. All BSS's are above the RSSI thresholds.
+        self.rule_ssid1.signal = -5000
+        self.rule_ssid2.signal = -6500
+        self.rule_ssid3.signal = -6900
+
+        # Connect to BSS0
+        self.validate_connected(self.bss_hostapd[0])
+
+        # AP directed roam to BSS1
+        self.validate_ap_roamed(self.bss_hostapd[0], self.bss_hostapd[1])
+
+        # AP directed roam to BSS2
+        self.validate_ap_roamed(self.bss_hostapd[1], self.bss_hostapd[2])
+
+    def test_avoiding_under_threshold_bss(self):
+        # In this test IWD will blacklist BSS0, then roam the BSS1. BSS1 will
+        # then tell IWD to roam, but it should go back to BSS0 since the only
+        # non-blacklisted BSS is under the roam threshold.
+        self.rule_ssid1.signal = -5000
+        self.rule_ssid2.signal = -6500
+        self.rule_ssid3.signal = -7300
+
+        # Connect to BSS0
+        self.validate_connected(self.bss_hostapd[0])
+
+        # AP directed roam to BSS1
+        self.validate_ap_roamed(self.bss_hostapd[0], self.bss_hostapd[1])
+
+        # AP directed roam, but IWD should choose BSS0 since BSS2 is -73dB
+        self.validate_ap_roamed(self.bss_hostapd[1], self.bss_hostapd[0])
+
+    def test_connect_to_roam_blacklisted_bss(self):
+        # In this test a BSS will be roam blacklisted, but all other options are
+        # below the RSSI threshold so IWD should roam back to the blacklisted
+        # BSS.
+        self.rule_ssid1.signal = -5000
+        self.rule_ssid2.signal = -8000
+        self.rule_ssid3.signal = -8500
+
+        # Connect to BSS0
+        self.validate_connected(self.bss_hostapd[0])
+
+        # AP directed roam, should connect to BSS1 as its the next best
+        self.validate_ap_roamed(self.bss_hostapd[0], self.bss_hostapd[1])
+
+        # Connected to BSS1, but the signal is bad, so IWD should try to roam
+        # again. BSS0 is still blacklisted, but its the only reasonable option
+        # since both BSS1 and BSS2 are below the set RSSI threshold (-72dB)
+
+        from_condition = 'obj.state == DeviceState.roaming'
+        to_condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_change(self.device, from_condition, to_condition)
+
+        # IWD should have connected to BSS0, even though its roam blacklisted
+        self.bss_hostapd[0].wait_for_event('AP-STA-CONNECTED %s' % self.device.address)
+
+    def test_blacklist_during_roam_scan(self):
+        # Tests that an AP roam request mid-roam results in the AP still being
+        # blacklisted even though the request itself doesn't directly trigger
+        # a roam.
+        self.rule_ssid1.signal = -7300
+        self.rule_ssid2.signal = -7500
+        self.rule_ssid3.signal = -8500
+
+        # Connect to BSS0 under the roam threshold so IWD will immediately try
+        # roaming elsewhere
+        self.validate_connected(self.bss_hostapd[0])
+
+        self.device.wait_for_event("roam-scan-triggered")
+
+        self.bss_hostapd[0].send_bss_transition(
+            self.device.address, self.neighbor_list, disassoc_imminent=True
+        )
+        self.device.wait_for_event("ap-roam-blacklist-added")
+
+        # BSS0 should have gotten blacklisted even though IWD was mid-roam,
+        # causing IWD to choose BSS1 when it gets is results.
+
+        from_condition = 'obj.state == DeviceState.roaming'
+        to_condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_change(self.device, from_condition, to_condition)
+
+        self.bss_hostapd[1].wait_for_event('AP-STA-CONNECTED %s' % self.device.address)
+
+    def setUp(self):
+        self.wd = IWD(True)
+
+        devices = self.wd.list_devices(1)
+        self.device = devices[0]
+
+
+    def tearDown(self):
+        self.wd = None
+        self.device = None
+
+
+    @classmethod
+    def setUpClass(cls):
+        IWD.copy_to_storage("main.conf.roaming", IWD_CONFIG_DIR, "main.conf")
+        IWD.copy_to_storage('TestAPRoam.psk')
+        hwsim = Hwsim()
+
+        cls.bss_hostapd = [ HostapdCLI(config='ssid1.conf'),
+                            HostapdCLI(config='ssid2.conf'),
+                            HostapdCLI(config='ssid3.conf') ]
+        HostapdCLI.group_neighbors(*cls.bss_hostapd)
+
+        rad0 = hwsim.get_radio('rad0')
+        rad1 = hwsim.get_radio('rad1')
+        rad2 = hwsim.get_radio('rad2')
+
+        cls.neighbor_list = [
+            (cls.bss_hostapd[0].bssid, "8f0000005101060603000000"),
+            (cls.bss_hostapd[1].bssid, "8f0000005102060603000000"),
+            (cls.bss_hostapd[2].bssid, "8f0000005103060603000000"),
+        ]
+
+
+        cls.rule_ssid1 = hwsim.rules.create()
+        cls.rule_ssid1.source = rad0.addresses[0]
+        cls.rule_ssid1.bidirectional = True
+        cls.rule_ssid1.enabled = True
+
+        cls.rule_ssid2 = hwsim.rules.create()
+        cls.rule_ssid2.source = rad1.addresses[0]
+        cls.rule_ssid2.bidirectional = True
+        cls.rule_ssid2.enabled = True
+
+        cls.rule_ssid3 = hwsim.rules.create()
+        cls.rule_ssid3.source = rad2.addresses[0]
+        cls.rule_ssid3.bidirectional = True
+        cls.rule_ssid3.enabled = True
+
+    @classmethod
+    def tearDownClass(cls):
+        IWD.clear_storage()
+
+if __name__ == '__main__':
+    unittest.main(exit=True)