auto-t: add test for FT-over-DS

autotests/testFT-PSK-over-DS/ft-psk-ccmp-1.conf

@@ -0,0 +1,41 @@
+hw_mode=g
+channel=1
+ssid=TestFT
+utf8_ssid=1
+ctrl_interface=/var/run/hostapd
+
+r1_key_holder=120000000001
+nas_identifier=dummy1
+
+wpa=2
+# Can support WPA-PSK and FT-PSK (space separated list) and/or EAP at the same
+# time but we want to force FT
+wpa_key_mgmt=FT-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=EasilyGuessedPassword
+wpa_ptk_rekey=30
+wpa_group_rekey=80
+ieee80211w=1
+rsn_preauth=1
+rsn_preauth_interfaces=lo
+disable_pmksa_caching=0
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+okc=1
+mobility_domain=1234
+reassociation_deadline=60000
+r0kh=12:00:00:00:00:01 dummy1 000102030405060708090a0b0c0d0e0f
+r0kh=12:00:00:00:00:02 dummy2 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:01 00:00:00:00:00:01 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:02 00:00:00:00:00:02 000102030405060708090a0b0c0d0e0f
+# Push mode only needed for 8021x, not PSK mode since msk already known
+pmk_r1_push=0
+# Allow locally generated FT response so we don't have to configure push/pull
+# between BSSes running as separate hostapd processes as in the test-runner
+# case.  Only works with FT-PSK, otherwise brctl needs to be installed and
+# CONFIG_BRIDGE enabled in the kernel.
+ft_psk_generate_local=1
+ft_over_ds=1
+ap_table_expiration_time=36000
+ap_table_max_size=10
+rrm_neighbor_report=1

autotests/testFT-PSK-over-DS/ft-psk-ccmp-2.conf

@@ -0,0 +1,41 @@
+hw_mode=g
+channel=2
+ssid=TestFT
+utf8_ssid=1
+ctrl_interface=/var/run/hostapd
+
+r1_key_holder=120000000002
+nas_identifier=dummy2
+
+wpa=2
+# Can support WPA-PSK and FT-PSK (space separated list) and/or EAP at the same
+# time but we want to force FT
+wpa_key_mgmt=FT-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=EasilyGuessedPassword
+wpa_ptk_rekey=30
+wpa_group_rekey=80
+ieee80211w=1
+rsn_preauth=1
+rsn_preauth_interfaces=lo
+disable_pmksa_caching=0
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+okc=1
+mobility_domain=1234
+reassociation_deadline=60000
+r0kh=12:00:00:00:00:01 dummy1 000102030405060708090a0b0c0d0e0f
+r0kh=12:00:00:00:00:02 dummy2 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:01 00:00:00:00:00:01 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:02 00:00:00:00:00:02 000102030405060708090a0b0c0d0e0f
+# Push mode only needed for 8021x, not PSK mode since msk already known
+pmk_r1_push=0
+# Allow locally generated FT response so we don't have to configure push/pull
+# between BSSes running as separate hostapd processes as in the test-runner
+# case.  Only works with FT-PSK, otherwise brctl needs to be installed and
+# CONFIG_BRIDGE enabled in the kernel.
+ft_psk_generate_local=1
+ft_over_ds=1
+ap_table_expiration_time=36000
+ap_table_max_size=10
+rrm_neighbor_report=1

autotests/testFT-PSK-over-DS/hw.conf

@@ -0,0 +1,10 @@
+[SETUP]
+num_radios=3
+max_test_exec_interval_sec=45
+iwd_config_dir=/tmp
+tmpfs_extra_stuff=main.conf
+needs_hwsim=1
+
+[HOSTAPD]
+rad0=ft-psk-ccmp-1.conf
+rad1=ft-psk-ccmp-2.conf

autotests/testFT-PSK-over-DS/main.conf

@@ -0,0 +1,2 @@
+[Scan]
+disable_mac_address_randomization=true

autotests/testFT-PSK-over-DS/test.py

@@ -0,0 +1,165 @@
+#! /usr/bin/python3
+
+import unittest
+import sys, os
+
+sys.path.append('../util')
+import iwd
+from iwd import IWD
+from iwd import PSKAgent
+from iwd import NetworkType
+from hwsim import Hwsim
+from hostapd import HostapdCLI, hostapd_map
+import testutil
+
+class Test(unittest.TestCase):
+    def test_roam_success(self):
+        hwsim = Hwsim()
+
+        rule0 = hwsim.rules.create()
+        rule0.source = self.bss_radio[0].addresses[0]
+        rule0.bidirectional = True
+
+        rule1 = hwsim.rules.create()
+        rule1.source = self.bss_radio[1].addresses[0]
+        rule1.bidirectional = True
+
+        wd = IWD()
+
+        psk_agent = PSKAgent("EasilyGuessedPassword")
+        wd.register_psk_agent(psk_agent)
+
+        device = wd.list_devices(1)[0]
+
+        # Check that iwd selects BSS 0 first
+        rule0.signal = -2000
+        rule1.signal = -2500
+
+        condition = 'not obj.scanning'
+        wd.wait_for_object_condition(device, condition)
+
+        device.scan()
+
+        condition = 'obj.scanning'
+        wd.wait_for_object_condition(device, condition)
+
+        condition = 'not obj.scanning'
+        wd.wait_for_object_condition(device, condition)
+
+        ordered_network = device.get_ordered_network('TestFT')
+
+        self.assertEqual(ordered_network.type, NetworkType.psk)
+        self.assertEqual(ordered_network.signal_strength, -2000)
+
+        condition = 'not obj.connected'
+        wd.wait_for_object_condition(ordered_network.network_object, condition)
+
+        self.assertFalse(self.bss_hostapd[0].list_sta())
+        self.assertFalse(self.bss_hostapd[1].list_sta())
+
+        ordered_network.network_object.connect()
+
+        condition = 'obj.connected'
+        wd.wait_for_object_condition(ordered_network.network_object, condition)
+
+        self.assertTrue(self.bss_hostapd[0].list_sta())
+        self.assertFalse(self.bss_hostapd[1].list_sta())
+
+        wd.unregister_psk_agent(psk_agent)
+
+        testutil.test_iface_operstate(device.name)
+        testutil.test_ifaces_connected(self.bss_hostapd[0].ifname, device.name)
+        self.assertRaises(Exception, testutil.test_ifaces_connected,
+                          (self.bss_hostapd[1].ifname, device.name))
+
+        # Check that iwd starts transition to BSS 1 in less than 10 seconds.
+        # The 10 seconds is longer than needed to scan on just two channels
+        # but short enough that a full scan on the 2.4 + 5.8 bands supported
+        # by mac80211_hwsim will not finish.  If this times out then, but
+        # device_roam_trigger_cb has happened, it probably means that
+        # Neighbor Reports are broken.
+        rule0.signal = -8000
+
+        condition = 'obj.state == DeviceState.roaming'
+        wd.wait_for_object_condition(device, condition, 10)
+
+        # Check that iwd is on BSS 1 once out of roaming state and doesn't
+        # go through 'disconnected', 'autoconnect', 'connecting' in between
+        condition = 'obj.state != DeviceState.roaming'
+        wd.wait_for_object_condition(device, condition, 5)
+
+        self.assertEqual(device.state, iwd.DeviceState.connected)
+        self.assertTrue(self.bss_hostapd[1].list_sta())
+
+        testutil.test_iface_operstate(device.name)
+        testutil.test_ifaces_connected(self.bss_hostapd[1].ifname, device.name)
+        self.assertRaises(Exception, testutil.test_ifaces_connected,
+                          (self.bss_hostapd[0].ifname, device.name))
+
+    def tearDown(self):
+        os.system('ifconfig "' + self.bss_hostapd[0].ifname + '" down')
+        os.system('ifconfig "' + self.bss_hostapd[1].ifname + '" down')
+        os.system('ifconfig "' + self.bss_hostapd[0].ifname + '" up')
+        os.system('ifconfig "' + self.bss_hostapd[1].ifname + '" up')
+
+        hwsim = Hwsim()
+        wd = IWD()
+        device = wd.list_devices(1)[0]
+        try:
+            device.disconnect()
+        except:
+            pass
+
+        condition = 'obj.state == DeviceState.disconnected'
+        wd.wait_for_object_condition(device, condition)
+
+        for rule in list(hwsim.rules.keys()):
+            del hwsim.rules[rule]
+
+    @classmethod
+    def setUpClass(cls):
+        hwsim = Hwsim()
+
+        cls.bss_hostapd = [None, None]
+        cls.bss_radio = [None, None]
+        for intf in hostapd_map.values():
+            if intf.config and '1' in intf.config:
+                bss_idx = 0
+            elif intf.config and '2' in intf.config:
+                bss_idx = 1
+            else:
+                continue
+
+            for path in hwsim.radios:
+                radio = hwsim.radios[path]
+                if radio.name == intf.wiphy.name:
+                    break
+
+            cls.bss_hostapd[bss_idx] = HostapdCLI(intf)
+            cls.bss_radio[bss_idx] = radio
+
+        # Set interface addresses to those expected by hostapd config files
+        os.system('ifconfig "' + cls.bss_hostapd[0].ifname +
+                '" down hw ether 12:00:00:00:00:01 up')
+        os.system('ifconfig "' + cls.bss_hostapd[1].ifname +
+                '" down hw ether 12:00:00:00:00:02 up')
+
+        cls.bss_hostapd[0].reload()
+        cls.bss_hostapd[1].reload()
+
+        # Fill in the neighbor AP tables in both BSSes.  By default each
+        # instance knows only about current BSS, even inside one hostapd
+        # process.
+        # FT still works without the neighbor AP table but neighbor reports
+        # have to be disabled in the .conf files
+        cls.bss_hostapd[0].set_neighbor('12:00:00:00:00:02', 'TestFT',
+                '1200000000028f0000005102060603000000')
+        cls.bss_hostapd[1].set_neighbor('12:00:00:00:00:01', 'TestFT',
+                '1200000000018f0000005101060603000000')
+
+    @classmethod
+    def tearDownClass(cls):
+        IWD.clear_storage()
+
+if __name__ == '__main__':
+    unittest.main(exit=True)