Kernel/iwd
3
0
Fork 0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-11-01 01:29:23 +01:00
Code Releases Activity
efe53e28c8
iwd/autotests/testPreauth-roam/connection_test.py

128 lines
4.2 KiB
Python
Raw Normal View History

autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
#! /usr/bin/python3
import unittest
import sys, os
sys.path.append('../util')
import iwd
from iwd import IWD
from iwd import PSKAgent
from iwd import NetworkType
from hwsim import Hwsim
auto-t: prepare autotests for test-runner re-write The tests basically remained the same with a few minor changes. The wiphy_map and in turn hostapd_map are no longer used. This was already partially converted a long time ago when the 'config' parameter was added to HostapdCLI. This patch fully converts all autotests to use 'config' rather than looking up by interface. Some test scripts were named 'test.py' which was fine before but the new rewrite actually loads each python test as a module. The name 'test' is too ambiguous and causes issues due to a native python module with the same name. All of these files were renamed to 'connection_test.py'.
2020-09-11 01:12:22 +02:00
from hostapd import HostapdCLI
autotests: Test communication when iwd reports connected Test that the AP interface and the station interface managed by iwd can actually send and receive ethernet traffic when iwd is in the connected state. Due to linux routing none of the high level utilities like ping or arping can be easily used to test communication between two interfaces of the same machine so use a method based on the mac80211_hwsim/tools/hwsim_test.c utility in the wpa_supplicant tree that uses a raw socket to inject unicast and broadcast frames. Add this check in three tests of different security type connections that simulate a single AP, and the two roaming tests with two APs. Check that the station can't communicate with the other AP's interface.
2017-05-22 10:49:47 +02:00
import testutil
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
class Test(unittest.TestCase):
def test_preauth_success(self):
hwsim = Hwsim()
auto-t: updated autotests to use hwsim.get_radio This removes all the duplicated code where the interfaces are iterated and the radio/hostapd instances are created. Instead the two new APIs are used to get each instance, e.g.: hapd = HostapdCLI(config='ssid.conf') radio = hwsim.get_radio('radX')
2019-06-11 18:25:54 +02:00
bss_hostapd = [ HostapdCLI(config='eaptls-preauth-1.conf'),
HostapdCLI(config='eaptls-preauth-2.conf') ]
bss_radio = [ hwsim.get_radio('rad0'),
hwsim.get_radio('rad1') ]
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
rule0 = hwsim.rules.create()
rule0.source = bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = bss_radio[1].addresses[0]
rule1.bidirectional = True
# Fill in the neighbor AP tables in both BSSes. By default each
# instance knows only about current BSS, even inside one hostapd
# process.
# Roaming still works without the neighbor AP table but neighbor
# reports have to be disabled in the .conf files
bss0_nr = ''.join(bss_radio[0].addresses[0].split(':')) + \
'8f0000005101060603000000'
bss1_nr = ''.join(bss_radio[1].addresses[0].split(':')) + \
'8f0000005102060603000000'
bss_hostapd[0].set_neighbor(bss_radio[1].addresses[0], 'TestPreauth',
bss1_nr)
bss_hostapd[1].set_neighbor(bss_radio[0].addresses[0], 'TestPreauth',
bss0_nr)
# Check that iwd selects BSS 0 first
rule0.signal = -2500
rule1.signal = -3500
auto-t: fix testPreauth-roam Changed to wait for DeviceState instead of network object as well as moved hwsim rules ahead of the IWD initializer to avoid IWD scanning before the rules are fully in place.
2020-09-11 01:12:46 +02:00
wd = IWD()
device = wd.list_devices(1)[0]
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'obj.scanning'
wd.wait_for_object_condition(device, condition)
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
auto-t: update tests to use get_ordered_network call
2018-12-14 20:15:28 +01:00
ordered_network = device.get_ordered_network('TestPreauth')
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
self.assertEqual(ordered_network.type, NetworkType.eap)
self.assertEqual(ordered_network.signal_strength, -2500)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
self.assertFalse(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
ordered_network.network_object.connect()
auto-t: fix testPreauth-roam Changed to wait for DeviceState instead of network object as well as moved hwsim rules ahead of the IWD initializer to avoid IWD scanning before the rules are fully in place.
2020-09-11 01:12:46 +02:00
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
self.assertTrue(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
autotests: Test operstate is IF_OPER_UP when state == connected Test that iwd correctly sets the interface's operstate before and after a roam, in the same autotests which run the connectivity check.
2017-05-30 14:26:20 +02:00
testutil.test_iface_operstate(device.name)
autotests: Test communication when iwd reports connected Test that the AP interface and the station interface managed by iwd can actually send and receive ethernet traffic when iwd is in the connected state. Due to linux routing none of the high level utilities like ping or arping can be easily used to test communication between two interfaces of the same machine so use a method based on the mac80211_hwsim/tools/hwsim_test.c utility in the wpa_supplicant tree that uses a raw socket to inject unicast and broadcast frames. Add this check in three tests of different security type connections that simulate a single AP, and the two roaming tests with two APs. Check that the station can't communicate with the other AP's interface.
2017-05-22 10:49:47 +02:00
testutil.test_ifaces_connected(bss_hostapd[0].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
autotests: Fix an assertRaises parameter
2017-09-30 04:28:15 +02:00
bss_hostapd[1].ifname, device.name)
autotests: Test communication when iwd reports connected Test that the AP interface and the station interface managed by iwd can actually send and receive ethernet traffic when iwd is in the connected state. Due to linux routing none of the high level utilities like ping or arping can be easily used to test communication between two interfaces of the same machine so use a method based on the mac80211_hwsim/tools/hwsim_test.c utility in the wpa_supplicant tree that uses a raw socket to inject unicast and broadcast frames. Add this check in three tests of different security type connections that simulate a single AP, and the two roaming tests with two APs. Check that the station can't communicate with the other AP's interface.
2017-05-22 10:49:47 +02:00
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
# Check that iwd starts transition to BSS 1 in less than 15 seconds
rule0.signal = -8000
condition = 'obj.state == DeviceState.roaming'
auto-t: Increase all test timeouts Slower systems may not be able to make some timeouts that tests mandated. All timeouts were increased significantly to allow tests to pass on slow systems.
2020-09-11 01:12:37 +02:00
wd.wait_for_object_condition(device, condition)
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
# TODO: verify that the PMK from preauthentication was used
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
condition = 'obj.state != DeviceState.roaming'
auto-t: Increase all test timeouts Slower systems may not be able to make some timeouts that tests mandated. All timeouts were increased significantly to allow tests to pass on slow systems.
2020-09-11 01:12:37 +02:00
wd.wait_for_object_condition(device, condition)
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
self.assertEqual(device.state, iwd.DeviceState.connected)
self.assertTrue(bss_hostapd[1].list_sta())
autotests: Test operstate is IF_OPER_UP when state == connected Test that iwd correctly sets the interface's operstate before and after a roam, in the same autotests which run the connectivity check.
2017-05-30 14:26:20 +02:00
testutil.test_iface_operstate(device.name)
autotests: Test communication when iwd reports connected Test that the AP interface and the station interface managed by iwd can actually send and receive ethernet traffic when iwd is in the connected state. Due to linux routing none of the high level utilities like ping or arping can be easily used to test communication between two interfaces of the same machine so use a method based on the mac80211_hwsim/tools/hwsim_test.c utility in the wpa_supplicant tree that uses a raw socket to inject unicast and broadcast frames. Add this check in three tests of different security type connections that simulate a single AP, and the two roaming tests with two APs. Check that the station can't communicate with the other AP's interface.
2017-05-22 10:49:47 +02:00
testutil.test_ifaces_connected(bss_hostapd[1].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(bss_hostapd[0].ifname, device.name))
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
@classmethod
def setUpClass(cls):
IWD.copy_to_storage('TestPreauth.8021x')
os.system('ifconfig lo up')
@classmethod
def tearDownClass(cls):
IWD.clear_storage()
if __name__ == '__main__':
unittest.main(exit=True)
Copy Permalink