Kernel/iwd
3
0
Fork 0
mirror of https://git.kernel.org/pub/scm/network/wireless/iwd.git synced 2024-11-05 11:39:24 +01:00
Code Releases Activity
c96317041d
iwd/autotests/testPreauth-roam/eaptls-preauth-2.conf

32 lines
646 B
Plaintext
Raw Normal View History

autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
hw_mode=g
channel=2
ssid=TestPreauth
utf8_ssid=1
wpa=2
wpa_key_mgmt=WPA-EAP
wpa_pairwise=CCMP
ieee8021x=1
wpa_ptk_rekey=30
wpa_group_rekey=80
ieee80211w=1
# For EAP connect to the RADIUS server in the BSS 0
own_ip_addr=127.0.0.1
nas_identifier=testeap2
auth_server_addr=127.0.0.1
auth_server_port=1812
auth_server_shared_secret=secret
rsn_preauth=1
auto-t: replace hard-coded interfaces test-runner now supports interface name replacement inside hostapd config files. Since a given test configuration doesn't know what interface names there will be $ifaceN can be specified instead e.g. rsn_preauth_interfaces=$iface0 $iface1 The $ifaceN values will be replace with actual interface names when the test is started. This patch also removes ctrl_interface inside the hostapd config files as this is no longer required.
2020-09-11 01:12:32 +02:00
rsn_preauth_interfaces=$iface0 $iface1
autotests: Add a Preauthentication test Unfortunately this doesn't currently ensure that the preauthentication has succeeded and that later the PMKSA from the preauthentication was used in the transition, only that the preauthentication process doesn't break the transition. For now this can be confirmed by looking at the testrunner -v output to see that the line "EAP completed with eapSuccess" appears before the following line, and not after: src/device.c:device_enter_state() Old State: connected, new state: roaming
2017-04-29 03:53:29 +02:00
disable_pmksa_caching=0
# Allow PMK cache to be shared opportunistically among configured interfaces
# and BSSes (i.e., all configurations within a single hostapd process).
okc=1
ap_table_expiration_time=36000
ap_table_max_size=10
rrm_neighbor_report=1
Copy Permalink