iwd/src/station.c

3872 lines
98 KiB
C
Raw Normal View History

2018-08-31 20:24:26 +02:00
/*
*
* Wireless daemon for Linux
*
* Copyright (C) 2018-2019 Intel Corporation. All rights reserved.
2018-08-31 20:24:26 +02:00
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#define _GNU_SOURCE
#include <stdio.h>
2018-08-31 20:24:26 +02:00
#include <errno.h>
#include <time.h>
#include <sys/time.h>
2021-01-22 14:37:01 +01:00
#include <limits.h>
#include <linux/if_ether.h>
2018-08-31 20:24:26 +02:00
#include <ell/ell.h>
#include "ell/useful.h"
2018-08-31 20:24:26 +02:00
#include "src/util.h"
#include "src/iwd.h"
#include "src/module.h"
2018-08-31 20:24:26 +02:00
#include "src/common.h"
#include "src/watchlist.h"
2018-08-31 20:24:26 +02:00
#include "src/scan.h"
#include "src/netdev.h"
#include "src/dbus.h"
#include "src/wiphy.h"
2018-08-31 20:24:26 +02:00
#include "src/network.h"
#include "src/knownnetworks.h"
#include "src/ie.h"
#include "src/handshake.h"
2018-08-31 20:24:26 +02:00
#include "src/station.h"
#include "src/blacklist.h"
#include "src/mpdu.h"
#include "src/erp.h"
#include "src/netconfig.h"
#include "src/anqp.h"
#include "src/anqputil.h"
#include "src/diagnostic.h"
#include "src/frame-xchg.h"
2018-08-31 20:24:26 +02:00
static struct l_queue *station_list;
static uint32_t netdev_watch;
2019-10-25 04:15:17 +02:00
static uint32_t mfp_setting;
2021-01-22 14:37:01 +01:00
static uint32_t roam_retry_interval;
static bool anqp_disabled;
static bool netconfig_enabled;
static struct watchlist anqp_watches;
2018-08-31 20:24:26 +02:00
struct station {
enum station_state state;
struct watchlist state_watches;
struct scan_bss *connected_bss;
struct network *connected_network;
struct scan_bss *connect_pending_bss;
struct network *connect_pending_network;
struct l_queue *autoconnect_list;
struct l_queue *bss_list;
struct l_queue *hidden_bss_list_sorted;
struct l_hashmap *networks;
struct l_queue *networks_sorted;
struct l_dbus_message *connect_pending;
struct l_dbus_message *hidden_pending;
struct l_dbus_message *disconnect_pending;
struct l_dbus_message *scan_pending;
struct l_dbus_message *get_station_pending;
struct signal_agent *signal_agent;
uint32_t dbus_scan_id;
uint32_t quick_scan_id;
uint32_t hidden_network_scan_id;
/* Roaming related members */
struct timespec roam_min_time;
struct l_timeout *roam_trigger_timeout;
uint32_t roam_scan_id;
uint8_t preauth_bssid[6];
struct wiphy *wiphy;
struct netdev *netdev;
struct l_queue *anqp_pending;
struct netconfig *netconfig;
/* Set of frequencies to scan first when attempting a roam */
struct scan_freq_set *roam_freqs;
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
/* Frequencies split into subsets by priority */
struct scan_freq_set *scan_freqs_order[3];
unsigned int dbus_scan_subset_idx;
bool preparing_roam : 1;
bool roam_scan_full : 1;
bool signal_low : 1;
bool ap_directed_roaming : 1;
bool scanning : 1;
bool autoconnect : 1;
};
struct anqp_entry {
struct station *station;
struct network *network;
uint32_t pending;
};
2018-09-04 22:33:46 +02:00
struct wiphy *station_get_wiphy(struct station *station)
{
return station->wiphy;
}
2018-09-04 22:34:17 +02:00
struct netdev *station_get_netdev(struct station *station)
{
return station->netdev;
}
struct network *station_get_connected_network(struct station *station)
{
return station->connected_network;
}
2018-09-04 23:26:13 +02:00
bool station_is_busy(struct station *station)
{
if (station->state != STATION_STATE_DISCONNECTED &&
station->state != STATION_STATE_AUTOCONNECT_FULL &&
station->state != STATION_STATE_AUTOCONNECT_QUICK)
2018-09-04 23:26:13 +02:00
return true;
return false;
}
static bool station_is_autoconnecting(struct station *station)
{
return station->state == STATION_STATE_AUTOCONNECT_FULL ||
station->state == STATION_STATE_AUTOCONNECT_QUICK;
}
static void station_property_set_scanning(struct station *station,
bool scanning)
{
if (station->scanning == scanning)
return;
station->scanning = scanning;
l_dbus_property_changed(dbus_get_bus(),
netdev_get_path(station->netdev),
IWD_STATION_INTERFACE, "Scanning");
}
static void station_enter_state(struct station *station,
enum station_state state);
static int station_autoconnect_next(struct station *station)
{
struct network *network;
int r;
while ((network = l_queue_pop_head(station->autoconnect_list))) {
const char *ssid = network_get_ssid(network);
struct scan_bss *bss = network_bss_select(network, false);
l_debug("autoconnect: Trying SSID: %s", ssid);
if (!bss) {
l_debug("autoconnect: No suitable BSSes found");
continue;
}
l_debug("autoconnect: '%s' freq: %u, rank: %u, strength: %i",
util_address_to_string(bss->addr),
bss->frequency, bss->rank,
bss->signal_strength);
r = network_autoconnect(network, bss);
if (!r) {
station_enter_state(station,
STATION_STATE_CONNECTING_AUTO);
if (station->quick_scan_id) {
scan_cancel(netdev_get_wdev_id(station->netdev),
station->quick_scan_id);
station->quick_scan_id = 0;
station_property_set_scanning(station, false);
}
return 0;
} else
l_debug("autoconnect: network_autoconnect: %s (%d)",
strerror(-r), r);
}
return -ENOENT;
}
static void bss_free(void *data)
{
struct scan_bss *bss = data;
scan_bss_free(bss);
}
static void network_free(void *data)
{
struct network *network = data;
network_remove(network, -ESHUTDOWN);
}
static bool process_network(const void *key, void *data, void *user_data)
{
struct network *network = data;
struct station *station = user_data;
if (!network_bss_list_isempty(network)) {
bool connected = network == station->connected_network;
/* Build the network list ordered by rank */
network_rank_update(network, connected);
l_queue_insert(station->networks_sorted, network,
network_rank_compare, NULL);
return false;
}
/* Drop networks that have no more BSSs in range */
l_debug("No remaining BSSs for SSID: %s -- Removing network",
network_get_ssid(network));
network_remove(network, -ERANGE);
return true;
}
static const char *iwd_network_get_path(struct station *station,
const char *ssid,
enum security security)
{
static char path[256];
unsigned int pos, i;
pos = snprintf(path, sizeof(path), "%s/",
netdev_get_path(station->netdev));
for (i = 0; ssid[i] && pos < sizeof(path); i++)
pos += snprintf(path + pos, sizeof(path) - pos, "%02x",
ssid[i]);
snprintf(path + pos, sizeof(path) - pos, "_%s",
security_to_str(security));
return path;
}
struct network *station_network_find(struct station *station, const char *ssid,
enum security security)
{
const char *path = iwd_network_get_path(station, ssid, security);
return l_hashmap_lookup(station->networks, path);
}
static int bss_signal_strength_compare(const void *a, const void *b, void *user)
{
const struct scan_bss *new_bss = a;
const struct scan_bss *bss = b;
return (bss->signal_strength > new_bss->signal_strength) ? 1 : -1;
}
/*
* Returns the network object the BSS was added to or NULL if ignored.
*/
static struct network *station_add_seen_bss(struct station *station,
struct scan_bss *bss)
{
struct network *network;
struct ie_rsn_info info;
int r;
enum security security;
const char *path;
char ssid[33];
uint32_t kbps100 = DIV_ROUND_CLOSEST(bss->data_rate, 100000);
l_debug("Processing BSS '%s' with SSID: %s, freq: %u, rank: %u, "
"strength: %i, data_rate: %u.%u",
util_address_to_string(bss->addr),
util_ssid_to_utf8(bss->ssid_len, bss->ssid),
bss->frequency, bss->rank, bss->signal_strength,
kbps100 / 10, kbps100 % 10);
if (util_ssid_is_hidden(bss->ssid_len, bss->ssid)) {
l_debug("BSS has hidden SSID");
l_queue_insert(station->hidden_bss_list_sorted, bss,
bss_signal_strength_compare, NULL);
return NULL;
}
memcpy(ssid, bss->ssid, bss->ssid_len);
ssid[bss->ssid_len] = '\0';
if (!(bss->capability & IE_BSS_CAP_ESS)) {
l_debug("Ignoring non-ESS BSS \"%s\"", ssid);
return NULL;
}
memset(&info, 0, sizeof(info));
r = scan_bss_get_rsn_info(bss, &info);
if (r < 0) {
if (r != -ENOENT)
return NULL;
security = security_determine(bss->capability, NULL);
} else
security = security_determine(bss->capability, &info);
path = iwd_network_get_path(station, ssid, security);
network = l_hashmap_lookup(station->networks, path);
if (!network) {
2018-09-04 22:45:37 +02:00
network = network_create(station, ssid, security);
if (!network_register(network, path)) {
network_remove(network, -EINVAL);
return NULL;
}
l_hashmap_insert(station->networks,
network_get_path(network), network);
l_debug("Added new Network \"%s\" security %s",
network_get_ssid(network), security_to_str(security));
}
network_bss_add(network, bss);
return network;
}
static bool bss_match(const void *a, const void *b)
{
const struct scan_bss *bss_a = a;
const struct scan_bss *bss_b = b;
if (memcmp(bss_a->addr, bss_b->addr, sizeof(bss_a->addr)))
return false;
if (bss_a->ssid_len != bss_b->ssid_len)
return false;
return !memcmp(bss_a->ssid, bss_b->ssid, bss_a->ssid_len);
}
struct bss_expiration_data {
struct scan_bss *connected_bss;
uint64_t now;
const struct scan_freq_set *freqs;
};
#define SCAN_RESULT_BSS_RETENTION_TIME (30 * 1000000)
static bool bss_free_if_expired(void *data, void *user_data)
{
struct scan_bss *bss = data;
struct bss_expiration_data *expiration_data = user_data;
if (bss == expiration_data->connected_bss)
/* Do not expire the currently connected BSS. */
return false;
/* Keep any BSSes that are not on the frequency list */
if (!scan_freq_set_contains(expiration_data->freqs, bss->frequency))
return false;
if (l_time_before(expiration_data->now,
bss->time_stamp + SCAN_RESULT_BSS_RETENTION_TIME))
return false;
bss_free(bss);
return true;
}
static void station_bss_list_remove_expired_bsses(struct station *station,
const struct scan_freq_set *freqs)
{
struct bss_expiration_data data = {
.now = l_time_now(),
.connected_bss = station->connected_bss,
.freqs = freqs,
};
l_queue_foreach_remove(station->bss_list, bss_free_if_expired, &data);
}
struct nai_search {
struct network *network;
const char **realms;
};
static bool match_nai_realms(const struct network_info *info, void *user_data)
{
struct nai_search *search = user_data;
if (!network_info_match_nai_realm(info, search->realms))
return false;
network_set_info(search->network, (struct network_info *) info);
return true;
}
static void network_add_foreach(struct network *network, void *user_data)
{
struct station *station = user_data;
l_queue_insert(station->autoconnect_list, network,
network_rank_compare, NULL);
}
static bool match_pending(const void *a, const void *b)
{
const struct anqp_entry *entry = a;
return entry->pending != 0;
}
static void remove_anqp(void *data)
{
struct anqp_entry *entry = data;
if (entry->pending)
anqp_cancel(entry->pending);
l_free(entry);
}
static bool anqp_entry_foreach(void *data, void *user_data)
{
struct anqp_entry *e = data;
WATCHLIST_NOTIFY(&anqp_watches, station_anqp_watch_func_t,
STATION_ANQP_FINISHED, e->network);
remove_anqp(e);
return true;
}
static void station_anqp_response_cb(enum anqp_result result,
const void *anqp, size_t anqp_len,
void *user_data)
{
struct anqp_entry *entry = user_data;
struct station *station = entry->station;
struct network *network = entry->network;
struct anqp_iter iter;
uint16_t id;
uint16_t len;
const void *data;
char **realms = NULL;
struct nai_search search;
l_debug("");
if (result != ANQP_SUCCESS) {
/* TODO: try next BSS */
goto request_done;
}
anqp_iter_init(&iter, anqp, anqp_len);
while (anqp_iter_next(&iter, &id, &len, &data)) {
switch (id) {
case ANQP_NAI_REALM:
if (realms)
break;
realms = anqp_parse_nai_realms(data, len);
if (!realms)
goto request_done;
break;
default:
continue;
}
}
if (!realms)
goto request_done;
search.network = network;
search.realms = (const char **)realms;
known_networks_foreach(match_nai_realms, &search);
l_strv_free(realms);
request_done:
entry->pending = 0;
/* Return if there are other pending requests */
if (l_queue_find(station->anqp_pending, match_pending, NULL))
return;
/* Notify all watchers now that every ANQP request has finished */
l_queue_foreach_remove(station->anqp_pending, anqp_entry_foreach, NULL);
l_queue_destroy(station->autoconnect_list, NULL);
station->autoconnect_list = l_queue_new();
if (station_is_autoconnecting(station)) {
station_network_foreach(station, network_add_foreach, station);
station_autoconnect_next(station);
}
}
static bool station_start_anqp(struct station *station, struct network *network,
struct scan_bss *bss)
{
uint8_t anqp[256];
uint8_t *ptr = anqp;
struct anqp_entry *entry;
if (!bss->hs20_capable)
return false;
/* Network already has ANQP data/HESSID */
if (network_get_info(network))
return false;
2019-07-12 23:40:17 +02:00
if (anqp_disabled) {
l_debug("Not querying AP for ANQP data (disabled)");
return false;
2019-07-12 23:40:17 +02:00
}
entry = l_new(struct anqp_entry, 1);
entry->station = station;
entry->network = network;
l_put_le16(ANQP_QUERY_LIST, ptr);
ptr += 2;
l_put_le16(2, ptr);
ptr += 2;
l_put_le16(ANQP_NAI_REALM, ptr);
ptr += 2;
l_put_le16(ANQP_VENDOR_SPECIFIC, ptr);
ptr += 2;
/* vendor length */
l_put_le16(7, ptr);
ptr += 2;
*ptr++ = 0x50;
*ptr++ = 0x6f;
*ptr++ = 0x9a;
*ptr++ = 0x11; /* HS20 ANQP Element type */
*ptr++ = ANQP_HS20_QUERY_LIST;
*ptr++ = 0; /* reserved */
*ptr++ = ANQP_HS20_OSU_PROVIDERS_NAI_LIST;
/*
* TODO: Additional roaming consortiums can be queried if indicated
* by the roaming consortium IE. The IE contains up to the first 3, and
* these are checked in hs20_find_settings_file.
*/
entry->pending = anqp_request(netdev_get_wdev_id(station->netdev),
netdev_get_address(station->netdev), bss, anqp,
ptr - anqp, station_anqp_response_cb,
entry, NULL);
if (!entry->pending) {
l_free(entry);
return false;
}
l_queue_push_head(station->anqp_pending, entry);
WATCHLIST_NOTIFY(&anqp_watches, station_anqp_watch_func_t,
STATION_ANQP_STARTED, network);
return true;
}
static bool bss_free_if_ssid_not_utf8(void *data, void *user_data)
{
struct scan_bss *bss = data;
if (util_ssid_is_hidden(bss->ssid_len, bss->ssid))
return false;
if (util_ssid_is_utf8(bss->ssid_len, bss->ssid))
return false;
l_debug("Dropping scan_bss '%s', with non-utf8 SSID",
util_address_to_string(bss->addr));
bss_free(bss);
return true;
}
/*
* Used when scan results were obtained; either from scan running
* inside station module or scans running in other state machines, e.g. wsc
*/
void station_set_scan_results(struct station *station,
struct l_queue *new_bss_list,
const struct scan_freq_set *freqs,
bool add_to_autoconnect)
{
const struct l_queue_entry *bss_entry;
struct network *network;
bool wait_for_anqp = false;
l_queue_foreach_remove(new_bss_list, bss_free_if_ssid_not_utf8, NULL);
while ((network = l_queue_pop_head(station->networks_sorted)))
network_bss_list_clear(network);
l_queue_clear(station->hidden_bss_list_sorted, NULL);
l_queue_destroy(station->autoconnect_list, NULL);
station->autoconnect_list = l_queue_new();
station_bss_list_remove_expired_bsses(station, freqs);
for (bss_entry = l_queue_get_entries(station->bss_list); bss_entry;
bss_entry = bss_entry->next) {
struct scan_bss *old_bss = bss_entry->data;
struct scan_bss *new_bss;
new_bss = l_queue_find(new_bss_list, bss_match, old_bss);
if (new_bss) {
if (old_bss == station->connected_bss)
station->connected_bss = new_bss;
bss_free(old_bss);
continue;
}
if (old_bss == station->connected_bss) {
l_warn("Connected BSS not in scan results");
station->connected_bss->rank = 0;
}
l_queue_push_tail(new_bss_list, old_bss);
}
l_queue_destroy(station->bss_list, NULL);
for (bss_entry = l_queue_get_entries(new_bss_list); bss_entry;
bss_entry = bss_entry->next) {
struct scan_bss *bss = bss_entry->data;
struct network *network = station_add_seen_bss(station, bss);
if (!network)
continue;
if (station_start_anqp(station, network, bss))
wait_for_anqp = true;
}
station->bss_list = new_bss_list;
l_hashmap_foreach_remove(station->networks, process_network, station);
if (!wait_for_anqp && add_to_autoconnect) {
station_network_foreach(station, network_add_foreach, station);
station_autoconnect_next(station);
}
}
static void station_reconnect(struct station *station);
static void station_handshake_event(struct handshake_state *hs,
enum handshake_event event,
void *user_data, ...)
{
struct station *station = user_data;
struct network *network = station->connected_network;
va_list args;
va_start(args, user_data);
switch (event) {
case HANDSHAKE_EVENT_STARTED:
l_debug("Handshaking");
break;
case HANDSHAKE_EVENT_SETTING_KEYS:
l_debug("Setting keys");
/* If we got here, then our settings work. Update if needed */
network_sync_settings(network);
break;
case HANDSHAKE_EVENT_FAILED:
netdev_handshake_failed(hs, va_arg(args, int));
break;
case HANDSHAKE_EVENT_REKEY_FAILED:
2021-03-24 19:10:32 +01:00
l_warn("Unable to securely rekey on this hw/kernel...");
station_reconnect(station);
break;
case HANDSHAKE_EVENT_COMPLETE:
case HANDSHAKE_EVENT_SETTING_KEYS_FAILED:
case HANDSHAKE_EVENT_EAP_NOTIFY:
/*
2020-01-21 07:21:38 +01:00
* currently we don't care about any other events. The
* netdev_connect_cb will notify us when the connection is
* complete.
*/
break;
}
va_end(args);
}
static int station_build_handshake_rsn(struct handshake_state *hs,
struct wiphy *wiphy,
struct network *network,
struct scan_bss *bss)
{
enum security security = network_get_security(network);
bool add_mde = false;
bool fils_hint = false;
struct ie_rsn_info bss_info;
uint8_t rsne_buf[256];
struct ie_rsn_info info;
uint8_t *ap_ie;
memset(&info, 0, sizeof(info));
memset(&bss_info, 0, sizeof(bss_info));
scan_bss_get_rsn_info(bss, &bss_info);
if (bss_info.akm_suites & (IE_RSN_AKM_SUITE_FILS_SHA256 |
IE_RSN_AKM_SUITE_FILS_SHA384))
hs->support_fils = true;
/*
* If this network 8021x we might have a set of cached EAP keys. If so
* wiphy may select FILS if supported by the AP.
*/
if (security == SECURITY_8021X && hs->support_fils)
fils_hint = network_has_erp_identity(network);
info.akm_suites = wiphy_select_akm(wiphy, bss, fils_hint);
/*
* Special case for OWE. With OWE we still need to build up the
* handshake object with AKM/cipher info since OWE does the full 4-way
* handshake. But if this is a non-OWE open network, we can skip this.
*/
if (security == SECURITY_NONE &&
!(info.akm_suites & IE_RSN_AKM_SUITE_OWE))
goto open_network;
if (!info.akm_suites)
goto not_supported;
info.pairwise_ciphers = wiphy_select_cipher(wiphy,
bss_info.pairwise_ciphers);
info.group_cipher = wiphy_select_cipher(wiphy,
bss_info.group_cipher);
if (!info.pairwise_ciphers || !info.group_cipher)
goto not_supported;
/* Management frame protection is explicitly off for OSEN */
if (info.akm_suites & IE_RSN_AKM_SUITE_OSEN) {
info.group_management_cipher =
IE_RSN_CIPHER_SUITE_NO_GROUP_TRAFFIC;
goto build_ie;
}
switch (mfp_setting) {
case 0:
break;
case 1:
info.group_management_cipher =
wiphy_select_cipher(wiphy,
bss_info.group_management_cipher);
info.mfpc = info.group_management_cipher != 0;
break;
case 2:
info.group_management_cipher =
wiphy_select_cipher(wiphy,
bss_info.group_management_cipher);
/*
* MFP required on our side, but AP doesn't support MFP
* or cipher mismatch
*/
if (info.group_management_cipher == 0)
goto not_supported;
info.mfpc = true;
info.mfpr = true;
break;
}
if (bss_info.mfpr && !info.mfpc)
goto not_supported;
build_ie:
/* RSN takes priority */
if (bss->rsne) {
ap_ie = bss->rsne;
ie_build_rsne(&info, rsne_buf);
} else if (bss->wpa) {
ap_ie = bss->wpa;
ie_build_wpa(&info, rsne_buf);
} else if (bss->osen) {
ap_ie = bss->osen;
ie_build_osen(&info, rsne_buf);
} else
goto not_supported;
if (!handshake_state_set_authenticator_ie(hs, ap_ie))
goto not_supported;
if (!handshake_state_set_supplicant_ie(hs, rsne_buf))
goto not_supported;
if (IE_AKM_IS_FT(info.akm_suites))
add_mde = true;
open_network:
if (security == SECURITY_NONE)
/* Perform FT association if available */
add_mde = bss->mde_present;
if (add_mde) {
uint8_t mde[5];
/* The MDE advertised by the BSS must be passed verbatim */
mde[0] = IE_TYPE_MOBILITY_DOMAIN;
mde[1] = 3;
memcpy(mde + 2, bss->mde, 3);
handshake_state_set_mde(hs, mde);
}
return 0;
not_supported:
return -ENOTSUP;
}
static struct handshake_state *station_handshake_setup(struct station *station,
struct network *network,
struct scan_bss *bss)
{
struct wiphy *wiphy = station->wiphy;
struct handshake_state *hs;
hs = netdev_handshake_state_new(station->netdev);
handshake_state_set_event_func(hs, station_handshake_event, station);
if (station_build_handshake_rsn(hs, wiphy, network, bss) < 0)
goto not_supported;
if (network_handshake_setup(network, hs) < 0)
goto not_supported;
/*
* If FILS was chosen, the ERP cache has been verified to exist. We
* wait to get it until here because at this point so there are no
* failure paths before fils_sm_new
*/
if (hs->akm_suite & (IE_RSN_AKM_SUITE_FILS_SHA256 |
IE_RSN_AKM_SUITE_FILS_SHA384 |
IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA256 |
IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384))
hs->erp_cache = erp_cache_get(network_get_ssid(network));
return hs;
not_supported:
handshake_state_free(hs);
return NULL;
}
static bool new_scan_results(int err, struct l_queue *bss_list,
const struct scan_freq_set *freqs,
void *userdata)
{
struct station *station = userdata;
bool autoconnect;
station_property_set_scanning(station, false);
if (err)
return false;
autoconnect = station_is_autoconnecting(station);
station_set_scan_results(station, bss_list, freqs, autoconnect);
return true;
}
static void periodic_scan_trigger(int err, void *user_data)
{
struct station *station = user_data;
station_property_set_scanning(station, true);
}
static void periodic_scan_stop(struct station *station)
{
uint64_t id = netdev_get_wdev_id(station->netdev);
if (scan_periodic_stop(id))
station_property_set_scanning(station, false);
}
2019-03-22 22:17:40 +01:00
static bool station_needs_hidden_network_scan(struct station *station)
{
if (!known_networks_has_hidden())
return false;
if (station_is_autoconnecting(station))
return true;
return !l_queue_isempty(station->hidden_bss_list_sorted);
2019-03-22 22:17:40 +01:00
}
static uint32_t station_scan_trigger(struct station *station,
struct scan_freq_set *freqs,
scan_trigger_func_t triggered,
scan_notify_func_t notify,
scan_destroy_func_t destroy)
{
uint64_t id = netdev_get_wdev_id(station->netdev);
2021-02-03 16:16:56 +01:00
struct scan_parameters params;
memset(&params, 0, sizeof(params));
params.flush = true;
params.freqs = freqs;
2019-03-22 22:17:40 +01:00
if (wiphy_can_randomize_mac_addr(station->wiphy) ||
station->connected_bss ||
station_needs_hidden_network_scan(station)) {
2019-03-22 22:17:40 +01:00
/* If we're connected, HW cannot randomize our MAC */
if (!station->connected_bss)
params.randomize_mac_addr_hint = true;
return scan_active_full(id, &params, triggered, notify,
station, destroy);
2019-03-22 22:17:40 +01:00
}
2021-02-03 16:16:56 +01:00
return scan_passive_full(id, &params, triggered, notify,
station, destroy);
2019-03-22 22:17:40 +01:00
}
static bool station_quick_scan_results(int err, struct l_queue *bss_list,
const struct scan_freq_set *freqs,
void *userdata)
{
struct station *station = userdata;
bool autoconnect;
station_property_set_scanning(station, false);
if (err)
goto done;
autoconnect = station_is_autoconnecting(station);
station_set_scan_results(station, bss_list, freqs, autoconnect);
done:
if (station->state == STATION_STATE_AUTOCONNECT_QUICK)
/*
* If we're still in AUTOCONNECT_QUICK state, then autoconnect
* failed to find any candidates. Transition to AUTOCONNECT_FULL
*/
station_enter_state(station, STATION_STATE_AUTOCONNECT_FULL);
return err == 0;
}
static void station_quick_scan_triggered(int err, void *user_data)
{
struct station *station = user_data;
if (err < 0) {
l_debug("Quick scan trigger failed: %i", err);
station_enter_state(station, STATION_STATE_AUTOCONNECT_FULL);
return;
}
l_debug("Quick scan triggered for %s",
netdev_get_name(station->netdev));
station_property_set_scanning(station, true);
}
static void station_quick_scan_destroy(void *userdata)
{
struct station *station = userdata;
station->quick_scan_id = 0;
}
static int station_quick_scan_trigger(struct station *station)
{
struct scan_freq_set *known_freq_set;
known_freq_set = known_networks_get_recent_frequencies(5);
if (!known_freq_set)
return -ENODATA;
if (!wiphy_constrain_freq_set(station->wiphy, known_freq_set)) {
scan_freq_set_free(known_freq_set);
return -ENOTSUP;
}
station->quick_scan_id = station_scan_trigger(station,
known_freq_set,
station_quick_scan_triggered,
station_quick_scan_results,
station_quick_scan_destroy);
scan_freq_set_free(known_freq_set);
if (!station->quick_scan_id)
return -EIO;
return 0;
}
static const char *station_state_to_string(enum station_state state)
{
switch (state) {
case STATION_STATE_DISCONNECTED:
return "disconnected";
case STATION_STATE_AUTOCONNECT_QUICK:
return "autoconnect_quick";
case STATION_STATE_AUTOCONNECT_FULL:
return "autoconnect_full";
case STATION_STATE_CONNECTING:
return "connecting";
case STATION_STATE_CONNECTING_AUTO:
return "connecting (auto)";
case STATION_STATE_CONNECTED:
return "connected";
case STATION_STATE_DISCONNECTING:
return "disconnecting";
case STATION_STATE_ROAMING:
return "roaming";
}
return "invalid";
}
static void station_enter_state(struct station *station,
enum station_state state)
{
uint64_t id = netdev_get_wdev_id(station->netdev);
struct l_dbus *dbus = dbus_get_bus();
bool disconnected;
l_debug("Old State: %s, new state: %s",
station_state_to_string(station->state),
station_state_to_string(state));
disconnected = !station_is_busy(station);
if ((disconnected && state > STATION_STATE_AUTOCONNECT_FULL) ||
(!disconnected && state != station->state))
l_dbus_property_changed(dbus, netdev_get_path(station->netdev),
IWD_STATION_INTERFACE, "State");
station->state = state;
switch (state) {
case STATION_STATE_AUTOCONNECT_QUICK:
if (!station_quick_scan_trigger(station))
break;
station->state = STATION_STATE_AUTOCONNECT_FULL;
/* Fall through */
case STATION_STATE_AUTOCONNECT_FULL:
scan_periodic_start(id, periodic_scan_trigger,
new_scan_results, station);
break;
case STATION_STATE_CONNECTING:
case STATION_STATE_CONNECTING_AUTO:
/* Refresh the ordered network list */
network_rank_update(station->connected_network, true);
l_queue_remove(station->networks_sorted, station->connected_network);
l_queue_insert(station->networks_sorted, station->connected_network,
network_rank_compare, NULL);
l_dbus_property_changed(dbus, netdev_get_path(station->netdev),
IWD_STATION_INTERFACE, "ConnectedNetwork");
l_dbus_property_changed(dbus,
network_get_path(station->connected_network),
IWD_NETWORK_INTERFACE, "Connected");
periodic_scan_stop(station);
break;
case STATION_STATE_DISCONNECTED:
periodic_scan_stop(station);
break;
case STATION_STATE_CONNECTED:
l_dbus_object_add_interface(dbus,
netdev_get_path(station->netdev),
IWD_STATION_DIAGNOSTIC_INTERFACE,
station);
periodic_scan_stop(station);
break;
case STATION_STATE_DISCONNECTING:
break;
case STATION_STATE_ROAMING:
break;
}
WATCHLIST_NOTIFY(&station->state_watches,
station_state_watch_func_t, station->state);
}
enum station_state station_get_state(struct station *station)
{
return station->state;
}
uint32_t station_add_state_watch(struct station *station,
station_state_watch_func_t func,
void *user_data,
station_destroy_func_t destroy)
{
return watchlist_add(&station->state_watches, func, user_data, destroy);
}
bool station_remove_state_watch(struct station *station, uint32_t id)
{
return watchlist_remove(&station->state_watches, id);
}
uint32_t station_add_anqp_watch(station_anqp_watch_func_t func,
void *user_data,
station_destroy_func_t destroy)
{
return watchlist_add(&anqp_watches, func, user_data, destroy);
}
void station_remove_anqp_watch(uint32_t id)
{
watchlist_remove(&anqp_watches, id);
}
bool station_set_autoconnect(struct station *station, bool autoconnect)
{
if (station->autoconnect == autoconnect)
return true;
station->autoconnect = autoconnect;
if (station->state == STATION_STATE_DISCONNECTED && autoconnect)
station_enter_state(station, STATION_STATE_AUTOCONNECT_QUICK);
if (station_is_autoconnecting(station) && !autoconnect)
station_enter_state(station, STATION_STATE_DISCONNECTED);
return true;
}
static void station_roam_state_clear(struct station *station)
{
l_timeout_remove(station->roam_trigger_timeout);
station->roam_trigger_timeout = NULL;
station->preparing_roam = false;
station->roam_scan_full = false;
station->signal_low = false;
station->roam_min_time.tv_sec = 0;
if (station->roam_scan_id)
scan_cancel(netdev_get_wdev_id(station->netdev),
station->roam_scan_id);
if (station->roam_freqs) {
scan_freq_set_free(station->roam_freqs);
station->roam_freqs = NULL;
}
}
static void station_reset_connection_state(struct station *station)
{
struct network *network = station->connected_network;
struct l_dbus *dbus = dbus_get_bus();
if (!network)
return;
if (station->state == STATION_STATE_CONNECTED ||
station->state == STATION_STATE_CONNECTING ||
station->state == STATION_STATE_CONNECTING_AUTO ||
station->state == STATION_STATE_ROAMING)
network_disconnected(network);
station_roam_state_clear(station);
/* Refresh the ordered network list */
network_rank_update(station->connected_network, false);
l_queue_remove(station->networks_sorted, station->connected_network);
l_queue_insert(station->networks_sorted, station->connected_network,
network_rank_compare, NULL);
station->connected_bss = NULL;
station->connected_network = NULL;
l_dbus_property_changed(dbus, netdev_get_path(station->netdev),
IWD_STATION_INTERFACE, "ConnectedNetwork");
l_dbus_property_changed(dbus, network_get_path(network),
IWD_NETWORK_INTERFACE, "Connected");
l_dbus_object_remove_interface(dbus, netdev_get_path(station->netdev),
IWD_STATION_DIAGNOSTIC_INTERFACE);
}
static void station_disassociated(struct station *station)
{
l_debug("%u", netdev_get_ifindex(station->netdev));
if (station->netconfig)
netconfig_reset(station->netconfig);
station_reset_connection_state(station);
station_enter_state(station, STATION_STATE_DISCONNECTED);
if (station->autoconnect)
station_enter_state(station, STATION_STATE_AUTOCONNECT_QUICK);
}
static void station_roam_timeout_rearm(struct station *station, int seconds);
static int station_roam_scan(struct station *station,
struct scan_freq_set *freq_set);
static uint32_t station_freq_from_neighbor_report(const uint8_t *country,
struct ie_neighbor_report_info *info, enum scan_band *out_band)
{
enum scan_band band;
uint32_t freq;
if (info->oper_class == 0) {
/*
* Some Cisco APs report all operating class values as 0
* in the Neighbor Report Responses. Work around this by
* using the most likely operating class for the channel
* number as the 2.4GHz and 5GHz bands happen to mostly
* use channels in two disjoint ranges.
*/
if (info->channel_num >= 1 && info->channel_num <= 14)
band = SCAN_BAND_2_4_GHZ;
else if (info->channel_num >= 36 && info->channel_num <= 169)
band = SCAN_BAND_5_GHZ;
else {
l_debug("Ignored: 0 oper class with an unusual "
"channel number");
return 0;
}
} else {
band = scan_oper_class_to_band(country, info->oper_class);
if (!band) {
l_debug("Ignored: unsupported oper class");
return 0;
}
}
freq = scan_channel_to_freq(info->channel_num, band);
if (!freq) {
l_debug("Ignored: unsupported channel");
return 0;
}
if (out_band)
*out_band = band;
return freq;
}
static void parse_neighbor_report(struct station *station,
const uint8_t *reports,
size_t reports_len,
struct scan_freq_set **set)
{
struct ie_tlv_iter iter;
int count_md = 0, count_no_md = 0;
struct scan_freq_set *freq_set_md, *freq_set_no_md;
uint32_t current_freq = 0;
struct handshake_state *hs = netdev_get_handshake(station->netdev);
freq_set_md = scan_freq_set_new();
freq_set_no_md = scan_freq_set_new();
ie_tlv_iter_init(&iter, reports, reports_len);
/* First see if any of the reports contain the MD bit set */
while (ie_tlv_iter_next(&iter)) {
struct ie_neighbor_report_info info;
uint32_t freq;
enum scan_band band;
const uint8_t *cc = NULL;
if (ie_tlv_iter_get_tag(&iter) != IE_TYPE_NEIGHBOR_REPORT)
continue;
if (ie_parse_neighbor_report(&iter, &info) < 0)
continue;
l_debug("Neighbor report received for %s: ch %i "
"(oper class %i), %s",
util_address_to_string(info.addr),
(int) info.channel_num, (int) info.oper_class,
info.md ? "MD set" : "MD not set");
if (station->connected_bss->cc_present)
cc = station->connected_bss->cc;
freq = station_freq_from_neighbor_report(cc, &info, &band);
if (!freq)
continue;
/* Skip if the band is not supported */
if (!(band & wiphy_get_supported_bands(station->wiphy)))
continue;
if (!memcmp(info.addr,
station->connected_bss->addr, ETH_ALEN)) {
/*
* If this report is for the current AP, don't add
* it to any of the lists yet. We will need to scan
* its channel because it may still be the best ranked
* or the only visible AP.
*/
current_freq = freq;
continue;
}
/* Add the frequency to one of the lists */
if (info.md && hs->mde) {
scan_freq_set_add(freq_set_md, freq);
count_md += 1;
} else {
scan_freq_set_add(freq_set_no_md, freq);
count_no_md += 1;
}
}
if (!current_freq)
current_freq = station->connected_bss->frequency;
/*
* If there are neighbor reports with the MD bit set then the bit
* is probably valid so scan only the frequencies of the neighbors
* with that bit set, which will allow us to use Fast Transition.
* Some APs, such as those based on hostapd do not set the MD bit
* even if the neighbor is within the MD.
*
* In any case we only select the frequencies here and will check
* the IEs in the scan results as the authoritative information
* on whether we can use Fast Transition, and rank BSSes based on
* that.
*
* TODO: possibly save the neighbors from outside the MD and if
* none of the ones in the MD end up working, try a non-FT
* transition to those neighbors. We should be using a
* blacklisting mechanism (for both initial connection and
* transitions) so that cound_md would not count the
* BSSes already used and when it goes down to 0 we'd
* automatically fall back to the non-FT candidates and then to
* full scan.
*/
if (count_md) {
scan_freq_set_add(freq_set_md, current_freq);
*set = freq_set_md;
scan_freq_set_free(freq_set_no_md);
} else if (count_no_md) {
scan_freq_set_add(freq_set_no_md, current_freq);
*set = freq_set_no_md;
scan_freq_set_free(freq_set_md);
} else {
scan_freq_set_free(freq_set_no_md);
scan_freq_set_free(freq_set_md);
*set = NULL;
}
}
static void station_early_neighbor_report_cb(struct netdev *netdev, int err,
const uint8_t *reports,
size_t reports_len,
void *user_data)
{
struct station *station = user_data;
l_debug("ifindex: %u, error: %d(%s)",
netdev_get_ifindex(station->netdev),
err, err < 0 ? strerror(-err) : "");
if (!reports || err)
return;
parse_neighbor_report(station, reports, reports_len,
&station->roam_freqs);
}
static void station_roamed(struct station *station)
{
station->roam_scan_full = false;
/*
* Schedule another roaming attempt in case the signal continues to
* remain low. A subsequent high signal notification will cancel it.
*/
if (station->signal_low)
2021-01-22 14:37:01 +01:00
station_roam_timeout_rearm(station, roam_retry_interval);
if (station->netconfig)
netconfig_reconfigure(station->netconfig);
if (station->roam_freqs) {
scan_freq_set_free(station->roam_freqs);
station->roam_freqs = NULL;
}
if (station->connected_bss->cap_rm_neighbor_report) {
if (netdev_neighbor_report_req(station->netdev,
station_early_neighbor_report_cb) < 0)
l_warn("Could not request neighbor report");
}
station_enter_state(station, STATION_STATE_CONNECTED);
}
static void station_roam_retry(struct station *station)
{
/*
* If we're still connected to the old BSS, only clear preparing_roam
* and reattempt in 60 seconds if signal level is still low at that
* time.
*/
station->preparing_roam = false;
station->roam_scan_full = false;
station->ap_directed_roaming = false;
if (station->signal_low)
station_roam_timeout_rearm(station, roam_retry_interval);
}
static void station_roam_failed(struct station *station)
{
l_debug("%u", netdev_get_ifindex(station->netdev));
/*
* If we attempted a reassociation or a fast transition, and ended up
* here then we are now disconnected.
*/
if (station->state == STATION_STATE_ROAMING) {
station_disassociated(station);
return;
}
/*
* We were told by the AP to roam, but failed. Try ourselves or
* wait for the AP to tell us to roam again
*/
if (station->ap_directed_roaming)
goto delayed_retry;
/*
* If we tried a limited scan, failed and the signal is still low,
* repeat with a full scan right away
*/
station: Make sure roam_scan_id is always canceled Under very rare circumstances the roaming scan triggered might not be canceled properly. This is because we issue the roam scan recursively from within a scan callback and re-use the id of the scan for the subsequent request. The destroy callback is invoked right after the callback and resets the id. This leads to the scan not being canceled properly in roam_state_clear(). src/netdev.c:netdev_mlme_notify() MLME notification Notify CQM(64) src/station.c:station_roam_trigger_cb() 37 src/station.c:station_roam_scan() ifindex: 37 src/station.c:station_roam_trigger_cb() Using cached neighbor report for roam ... src/scan.c:get_scan_done() get_scan_done src/station.c:station_roam_failed() 37 src/station.c:station_roam_scan() ifindex: 37 src/scan.c:scan_request_triggered() Active scan triggered for wdev 22 ^CTerminate src/netdev.c:netdev_free() Freeing netdev wlan0[37] src/device.c:device_free() src/station.c:station_free() ... Removing scan context for wdev 22 src/scan.c:scan_context_free() sc: 0x4a362a0 src/wiphy.c:wiphy_radio_work_done() Work item 14 done ==19542== Invalid write of size 4 ==19542== at 0x411500: station_roam_scan_destroy (station.c:2010) ==19542== by 0x420B5B: scan_request_free (scan.c:156) ==19542== by 0x410BAC: destroy_work (wiphy.c:294) ==19542== by 0x410BAC: wiphy_radio_work_done (wiphy.c:1613) ==19542== by 0x46C66E: l_queue_clear (queue.c:107) ==19542== by 0x46C6B8: l_queue_destroy (queue.c:82) ==19542== by 0x420BAE: scan_context_free (scan.c:205) ==19542== by 0x424135: scan_wdev_remove (scan.c:2272) ==19542== by 0x408754: netdev_free (netdev.c:847) ==19542== by 0x40E18C: netdev_shutdown (netdev.c:5773) ==19542== by 0x404756: iwd_shutdown (main.c:78) ==19542== by 0x404756: iwd_shutdown (main.c:65) ==19542== by 0x470E21: handle_callback (signal.c:78) ==19542== by 0x470E21: signalfd_read_cb (signal.c:104) ==19542== by 0x47166B: io_callback (io.c:120) ==19542== Address 0x4d81f98 is 200 bytes inside a block of size 288 free'd ==19542== at 0x48399CB: free (vg_replace_malloc.c:538) ==19542== by 0x47F3E5: interface_instance_free (dbus-service.c:510) ==19542== by 0x481DEA: _dbus_object_tree_remove_interface (dbus-service.c:1694) ==19542== by 0x481F1C: _dbus_object_tree_object_destroy (dbus-service.c:795) ==19542== by 0x40894F: netdev_free (netdev.c:844) ==19542== by 0x40E18C: netdev_shutdown (netdev.c:5773) ==19542== by 0x404756: iwd_shutdown (main.c:78) ==19542== by 0x404756: iwd_shutdown (main.c:65) ==19542== by 0x470E21: handle_callback (signal.c:78) ==19542== by 0x470E21: signalfd_read_cb (signal.c:104) ==19542== by 0x47166B: io_callback (io.c:120) ==19542== by 0x47088C: l_main_iterate (main.c:478) ==19542== by 0x47095B: l_main_run (main.c:525) ==19542== by 0x47095B: l_main_run (main.c:507) ==19542== by 0x470B6B: l_main_run_with_signal (main.c:647) ==19542== Block was alloc'd at ==19542== at 0x483879F: malloc (vg_replace_malloc.c:307) ==19542== by 0x46AB2D: l_malloc (util.c:62) ==19542== by 0x416599: station_create (station.c:3448) ==19542== by 0x406D55: netdev_newlink_notify (netdev.c:5324) ==19542== by 0x46D4BC: l_hashmap_foreach (hashmap.c:612) ==19542== by 0x472F46: process_broadcast (netlink.c:158) ==19542== by 0x472F46: can_read_data (netlink.c:279) ==19542== by 0x47166B: io_callback (io.c:120) ==19542== by 0x47088C: l_main_iterate (main.c:478) ==19542== by 0x47095B: l_main_run (main.c:525) ==19542== by 0x47095B: l_main_run (main.c:507) ==19542== by 0x470B6B: l_main_run_with_signal (main.c:647) ==19542== by 0x403EDB: main (main.c:490) ==19542==
2021-04-28 19:55:56 +02:00
if (station->signal_low && !station->roam_scan_full) {
/*
* Since we're re-using roam_scan_id, explicitly cancel
* the scan here, so that the destroy callback is not called
* after the return of this function
*/
scan_cancel(netdev_get_wdev_id(station->netdev),
station->roam_scan_id);
if (!station_roam_scan(station, NULL))
return;
}
delayed_retry:
station_roam_retry(station);
}
static void station_netconfig_event_handler(enum netconfig_event event,
void *user_data)
{
struct station *station = user_data;
switch (event) {
case NETCONFIG_EVENT_CONNECTED:
station_enter_state(station, STATION_STATE_CONNECTED);
break;
default:
l_error("station: Unsupported netconfig event: %d.", event);
break;
}
}
static void station_reassociate_cb(struct netdev *netdev,
enum netdev_result result,
void *event_data,
void *user_data)
{
struct station *station = user_data;
l_debug("%u, result: %d", netdev_get_ifindex(station->netdev), result);
if (station->state != STATION_STATE_ROAMING)
return;
if (result == NETDEV_RESULT_OK)
station_roamed(station);
else
station_roam_failed(station);
}
static void station_fast_transition_cb(struct netdev *netdev,
enum netdev_result result,
void *event_data,
void *user_data)
{
struct station *station = user_data;
l_debug("%u, result: %d", netdev_get_ifindex(station->netdev), result);
if (station->state != STATION_STATE_ROAMING)
return;
if (result == NETDEV_RESULT_OK)
station_roamed(station);
else
station_roam_failed(station);
}
static void station_netdev_event(struct netdev *netdev, enum netdev_event event,
void *event_data, void *user_data);
static void station_transition_reassociate(struct station *station,
struct scan_bss *bss,
struct handshake_state *new_hs)
{
if (netdev_reassociate(station->netdev, bss, station->connected_bss,
new_hs, station_netdev_event,
station_reassociate_cb, station) < 0) {
handshake_state_free(new_hs);
station_roam_failed(station);
return;
}
station->connected_bss = bss;
station->preparing_roam = false;
station_enter_state(station, STATION_STATE_ROAMING);
}
static bool bss_match_bssid(const void *a, const void *b)
{
const struct scan_bss *bss = a;
const uint8_t *bssid = b;
return !memcmp(bss->addr, bssid, sizeof(bss->addr));
}
static void station_preauthenticate_cb(struct netdev *netdev,
enum netdev_result result,
const uint8_t *pmk, void *user_data)
{
struct station *station = user_data;
struct network *connected = station->connected_network;
struct scan_bss *bss;
struct handshake_state *new_hs;
l_debug("%u, result: %d", netdev_get_ifindex(station->netdev), result);
if (!station->preparing_roam || result == NETDEV_RESULT_ABORTED)
return;
bss = l_queue_find(station->bss_list, bss_match_bssid,
station->preauth_bssid);
if (!bss) {
l_error("Roam target BSS not found");
station_roam_failed(station);
return;
}
new_hs = station_handshake_setup(station, connected, bss);
if (!new_hs) {
l_error("station_handshake_setup failed");
station_roam_failed(station);
return;
}
if (result == NETDEV_RESULT_OK) {
uint8_t pmkid[16];
uint8_t rsne_buf[300];
struct ie_rsn_info rsn_info;
handshake_state_set_pmk(new_hs, pmk, 32);
handshake_state_set_authenticator_address(new_hs,
station->preauth_bssid);
handshake_state_set_supplicant_address(new_hs,
netdev_get_address(station->netdev));
/*
* Rebuild the RSNE to include the negotiated PMKID. Note
* supplicant_ie can't be a WPA IE here, including because
* the WPA IE doesn't have a capabilities field and
* target_rsne->preauthentication would have been false in
* station_transition_start.
*/
ie_parse_rsne_from_data(new_hs->supplicant_ie,
new_hs->supplicant_ie[1] + 2,
&rsn_info);
handshake_state_get_pmkid(new_hs, pmkid);
rsn_info.num_pmkids = 1;
rsn_info.pmkids = pmkid;
ie_build_rsne(&rsn_info, rsne_buf);
handshake_state_set_supplicant_ie(new_hs, rsne_buf);
}
station_transition_reassociate(station, bss, new_hs);
}
static bool station_can_fast_transition(struct handshake_state *hs,
struct scan_bss *bss)
{
uint16_t mdid;
if (!hs->mde)
return false;
if (ie_parse_mobility_domain_from_data(hs->mde, hs->mde[1] + 2,
&mdid, NULL, NULL) < 0)
return false;
if (!(bss->mde_present && l_get_le16(bss->mde) == mdid))
return false;
if (hs->supplicant_ie != NULL) {
struct ie_rsn_info rsn_info;
if (!IE_AKM_IS_FT(hs->akm_suite))
return false;
if (scan_bss_get_rsn_info(bss, &rsn_info) < 0)
return false;
if (!IE_AKM_IS_FT(rsn_info.akm_suites))
return false;
}
return true;
}
static void station_transition_start(struct station *station,
struct scan_bss *bss)
{
struct handshake_state *hs = netdev_get_handshake(station->netdev);
struct network *connected = station->connected_network;
enum security security = network_get_security(connected);
struct handshake_state *new_hs;
struct ie_rsn_info cur_rsne, target_rsne;
int ret;
l_debug("%u, target %s", netdev_get_ifindex(station->netdev),
util_address_to_string(bss->addr));
/* Reset AP roam flag, at this point the roaming behaves the same */
station->ap_directed_roaming = false;
/* Can we use Fast Transition? */
if (station_can_fast_transition(hs, bss)) {
/* Rebuild handshake RSN for target AP */
if (station_build_handshake_rsn(hs, station->wiphy,
station->connected_network, bss) < 0) {
l_error("rebuilding handshake rsne failed");
station_roam_failed(station);
return;
}
/* FT-over-DS can be better suited for these situations */
if ((hs->mde[4] & 1) && station->signal_low) {
ret = netdev_fast_transition_over_ds(station->netdev,
bss, station_fast_transition_cb);
/* No action responses from this BSS, try over air */
if (ret == -ENOENT)
goto try_over_air;
else if (ret < 0) {
/*
* If we are here FT-over-air will not work
* either (identical checks) so try again later.
*/
station_roam_retry(station);
return;
}
} else {
try_over_air:
if (netdev_fast_transition(station->netdev, bss,
station_fast_transition_cb) < 0) {
station_roam_failed(station);
return;
}
}
station->connected_bss = bss;
station->preparing_roam = false;
station_enter_state(station, STATION_STATE_ROAMING);
return;
}
/* Non-FT transition */
/*
* FT not available, we can try preauthentication if available.
* 802.11-2012 section 11.5.9.2:
* "A STA shall not use preauthentication within the same mobility
* domain if AKM suite type 00-0F-AC:3 or 00-0F-AC:4 is used in
* the current association."
*/
if (security == SECURITY_8021X &&
scan_bss_get_rsn_info(station->connected_bss,
&cur_rsne) >= 0 &&
scan_bss_get_rsn_info(bss, &target_rsne) >= 0 &&
cur_rsne.preauthentication &&
target_rsne.preauthentication) {
/*
* Both the current and the target AP support
* pre-authentication and we're using 8021x authentication so
* attempt to pre-authenticate and reassociate afterwards.
* If the pre-authentication fails or times out we simply
* won't supply any PMKID when reassociating.
* Remain in the preparing_roam state.
*/
memcpy(station->preauth_bssid, bss->addr, ETH_ALEN);
if (netdev_preauthenticate(station->netdev, bss,
station_preauthenticate_cb,
station) >= 0)
return;
}
new_hs = station_handshake_setup(station, connected, bss);
if (!new_hs) {
l_error("station_handshake_setup failed in reassociation");
station_roam_failed(station);
return;
}
station_transition_reassociate(station, bss, new_hs);
}
static void station_roam_scan_triggered(int err, void *user_data)
{
struct station *station = user_data;
if (err) {
station_roam_failed(station);
return;
}
/*
* Do not update the Scanning property as we won't be updating the
* list of networks.
*/
}
static bool station_roam_scan_notify(int err, struct l_queue *bss_list,
const struct scan_freq_set *freqs,
void *userdata)
{
struct station *station = userdata;
struct network *network = station->connected_network;
struct handshake_state *hs = netdev_get_handshake(station->netdev);
struct scan_bss *bss;
struct scan_bss *best_bss = NULL;
double best_bss_rank = 0.0;
static const double RANK_FT_FACTOR = 1.3;
uint16_t mdid;
enum security orig_security, security;
bool seen = false;
bool fils_hint = network_has_erp_identity(network);
if (err) {
station_roam_failed(station);
return false;
}
/*
* Do not call station_set_scan_results because this may have been
* a partial scan. We could at most update the current networks' BSS
* list in its station->networks entry.
*/
orig_security = network_get_security(network);
if (hs->mde)
ie_parse_mobility_domain_from_data(hs->mde, hs->mde[1] + 2,
&mdid, NULL, NULL);
/*
* BSSes in the bss_list come already ranked with their initial
* association preference rank value. We only need to add preference
* for BSSes that are within the FT Mobility Domain so as to favor
* Fast Roaming, if it is supported.
*/
while ((bss = l_queue_pop_head(bss_list))) {
double rank;
struct ie_rsn_info info;
int r;
/* Skip the BSS we are connected to if doing an AP roam */
if (station->ap_directed_roaming && !memcmp(bss->addr,
station->connected_bss->addr, 6))
goto next;
/* Skip result if it is not part of the ESS */
if (bss->ssid_len != hs->ssid_len ||
memcmp(bss->ssid, hs->ssid, hs->ssid_len))
goto next;
memset(&info, 0, sizeof(info));
r = scan_bss_get_rsn_info(bss, &info);
if (r < 0) {
if (r != -ENOENT)
goto next;
security = security_determine(bss->capability, NULL);
} else
security = security_determine(bss->capability, &info);
if (security != orig_security)
goto next;
seen = true;
if (!wiphy_can_connect(station->wiphy, bss, fils_hint))
goto next;
if (blacklist_contains_bss(bss->addr))
goto next;
rank = bss->rank;
if (hs->mde && bss->mde_present && l_get_le16(bss->mde) == mdid)
rank *= RANK_FT_FACTOR;
if (rank > best_bss_rank) {
if (best_bss)
scan_bss_free(best_bss);
best_bss = bss;
best_bss_rank = rank;
continue;
}
next:
scan_bss_free(bss);
}
l_queue_destroy(bss_list, NULL);
if (!seen)
goto fail_free_bss;
/* See if we have anywhere to roam to */
if (!best_bss || scan_bss_addr_eq(best_bss, station->connected_bss))
goto fail_free_bss;
bss = network_bss_find_by_addr(network, best_bss->addr);
if (bss) {
scan_bss_free(best_bss);
best_bss = bss;
} else {
network_bss_add(network, best_bss);
l_queue_push_tail(station->bss_list, best_bss);
}
station_transition_start(station, best_bss);
return true;
fail_free_bss:
if (best_bss)
scan_bss_free(best_bss);
station_roam_failed(station);
return true;
}
static void station_roam_scan_destroy(void *userdata)
{
struct station *station = userdata;
station->roam_scan_id = 0;
}
static int station_roam_scan(struct station *station,
struct scan_freq_set *freq_set)
{
struct scan_parameters params = { .freqs = freq_set, .flush = true };
l_debug("ifindex: %u", netdev_get_ifindex(station->netdev));
if (station->connected_network)
/* Use direct probe request */
params.ssid = network_get_ssid(station->connected_network);
if (!freq_set)
station->roam_scan_full = true;
station->roam_scan_id =
scan_active_full(netdev_get_wdev_id(station->netdev), &params,
station_roam_scan_triggered,
station_roam_scan_notify, station,
station_roam_scan_destroy);
if (!station->roam_scan_id)
return -EIO;
return 0;
}
static int station_roam_scan_known_freqs(struct station *station)
{
const struct network_info *info = network_get_info(
station->connected_network);
struct scan_freq_set *freqs = network_info_get_roam_frequencies(info,
station->connected_bss->frequency, 5);
int r;
if (!freqs)
return -ENODATA;
r = station_roam_scan(station, freqs);
scan_freq_set_free(freqs);
return r;
}
static void station_neighbor_report_cb(struct netdev *netdev, int err,
const uint8_t *reports,
size_t reports_len, void *user_data)
{
struct station *station = user_data;
struct scan_freq_set *freq_set;
int r;
l_debug("ifindex: %u, error: %d(%s)",
netdev_get_ifindex(station->netdev),
err, err < 0 ? strerror(-err) : "");
/*
* Check if we're still attempting to roam -- if dbus Disconnect
* had been called in the meantime we just abort the attempt.
*/
if (!station->preparing_roam || err == -ENODEV)
return;
if (!reports || err) {
r = station_roam_scan_known_freqs(station);
if (r == -ENODATA)
l_debug("no neighbor report results or known freqs");
if (r < 0)
station_roam_failed(station);
return;
}
parse_neighbor_report(station, reports, reports_len, &freq_set);
r = station_roam_scan(station, freq_set);
if (freq_set)
scan_freq_set_free(freq_set);
if (r < 0)
station_roam_failed(station);
}
static void station_roam_trigger_cb(struct l_timeout *timeout, void *user_data)
{
struct station *station = user_data;
int r;
l_debug("%u", netdev_get_ifindex(station->netdev));
l_timeout_remove(station->roam_trigger_timeout);
station->roam_trigger_timeout = NULL;
station->preparing_roam = true;
/*
* If current BSS supports Neighbor Reports, narrow the scan down
* to channels occupied by known neighbors in the ESS. If no neighbor
* report was obtained upon connection, request one now. This isn't
* 100% reliable as the neighbor lists are not required to be
* complete or current. It is likely still better than doing a
* full scan. 10.11.10.1: "A neighbor report may not be exhaustive
* either by choice, or due to the fact that there may be neighbor
* APs not known to the AP."
*/
if (station->roam_freqs) {
if (station_roam_scan(station, station->roam_freqs) == 0) {
l_debug("Using cached neighbor report for roam");
return;
}
} else if (station->connected_bss->cap_rm_neighbor_report) {
if (netdev_neighbor_report_req(station->netdev,
station_neighbor_report_cb) == 0) {
l_debug("Requesting neighbor report for roam");
return;
}
}
r = station_roam_scan_known_freqs(station);
if (r == -ENODATA)
l_debug("No neighbor report or known frequencies, roam failed");
if (r < 0)
station_roam_failed(station);
}
static void station_roam_timeout_rearm(struct station *station, int seconds)
{
struct timespec now, min_timeout;
clock_gettime(CLOCK_MONOTONIC, &now);
min_timeout = now;
min_timeout.tv_sec += seconds;
if (station->roam_min_time.tv_sec < min_timeout.tv_sec ||
(station->roam_min_time.tv_sec == min_timeout.tv_sec &&
station->roam_min_time.tv_nsec < min_timeout.tv_nsec))
station->roam_min_time = min_timeout;
seconds = station->roam_min_time.tv_sec - now.tv_sec +
(station->roam_min_time.tv_nsec > now.tv_nsec ? 1 : 0);
station->roam_trigger_timeout =
l_timeout_create(seconds, station_roam_trigger_cb,
station, NULL);
}
2019-04-02 01:23:02 +02:00
static bool station_cannot_roam(struct station *station)
{
const struct l_settings *config = iwd_get_config();
bool disabled;
/*
* Disable roaming with hardware that can roam automatically. Note this
* is now required for recent kernels which have CQM event support on
* this type of hardware (e.g. brcmfmac).
*/
if (wiphy_supports_firmware_roam(station->wiphy))
return true;
if (!l_settings_get_bool(config, "Scan", "DisableRoamingScan",
2019-04-02 01:23:02 +02:00
&disabled))
disabled = false;
return disabled || station->preparing_roam ||
station->state == STATION_STATE_ROAMING;
}
#define WNM_REQUEST_MODE_PREFERRED_CANDIDATE_LIST (1 << 0)
#define WNM_REQUEST_MODE_TERMINATION_IMMINENT (1 << 3)
#define WNM_REQUEST_MODE_ESS_DISASSOCIATION_IMMINENT (1 << 4)
static void station_ap_directed_roam(struct station *station,
const struct mmpdu_header *hdr,
const void *body, size_t body_len)
{
uint32_t pos = 0;
uint8_t req_mode;
uint16_t dtimer;
uint8_t valid_interval;
l_debug("ifindex: %u", netdev_get_ifindex(station->netdev));
2019-04-02 01:23:02 +02:00
if (station_cannot_roam(station))
return;
if (body_len < 7)
goto format_error;
/*
* First two bytes are checked by the frame watch (WNM category and
* WNM action). The third is the dialog token which is not relevant
* because we did not send a BSS transition query -- so skip these
* first three bytes.
*/
pos += 3;
req_mode = l_get_u8(body + pos);
pos++;
/*
* TODO: Disassociation timer and validity interval are currently not
* used since the BSS transition request is being handled immediately.
*/
dtimer = l_get_le16(body + pos);
pos += 2;
valid_interval = l_get_u8(body + pos);
pos++;
l_debug("roam: BSS transition received from AP: "
"Disassociation Time: %u, "
"Validity interval: %u", dtimer, valid_interval);
/* check req_mode for optional values */
if (req_mode & WNM_REQUEST_MODE_TERMINATION_IMMINENT) {
if (pos + 12 > body_len)
goto format_error;
pos += 12;
}
if (req_mode & WNM_REQUEST_MODE_ESS_DISASSOCIATION_IMMINENT ) {
uint8_t url_len;
if (pos + 1 > body_len)
goto format_error;
url_len = l_get_u8(body + pos);
pos++;
if (pos + url_len > body_len)
goto format_error;
pos += url_len;
}
station->ap_directed_roaming = true;
station->preparing_roam = true;
l_timeout_remove(station->roam_trigger_timeout);
station->roam_trigger_timeout = NULL;
if (req_mode & WNM_REQUEST_MODE_PREFERRED_CANDIDATE_LIST) {
2020-01-21 07:21:38 +01:00
l_debug("roam: AP sent a preferred candidate list");
station_neighbor_report_cb(station->netdev, 0, body + pos,
body_len - pos,station);
} else {
l_debug("roam: AP did not include a preferred candidate list");
if (station_roam_scan(station, NULL) < 0)
station_roam_failed(station);
}
return;
format_error:
l_debug("bad AP roam frame formatting");
}
static void station_low_rssi(struct station *station)
{
if (station->signal_low)
return;
station->signal_low = true;
2019-04-02 01:23:02 +02:00
if (station_cannot_roam(station))
return;
/* Set a 5-second initial timeout */
station_roam_timeout_rearm(station, 5);
}
static void station_ok_rssi(struct station *station)
{
l_timeout_remove(station->roam_trigger_timeout);
station->roam_trigger_timeout = NULL;
station->signal_low = false;
station->roam_min_time.tv_sec = 0;
}
static void station_event_roamed(struct station *station, struct scan_bss *new)
{
struct scan_bss *stale;
network_bss_update(station->connected_network, new);
/* Remove new BSS if it exists in past scan results */
stale = l_queue_remove_if(station->bss_list, bss_match_bssid,
new->addr);
if (stale)
scan_bss_free(stale);
station->connected_bss = new;
l_queue_insert(station->bss_list, new, scan_bss_rank_compare, NULL);
station_roamed(station);
}
static void station_event_channel_switched(struct station *station,
const uint32_t freq)
{
struct network *network = station->connected_network;
station->connected_bss->frequency = freq;
network_bss_update(network, station->connected_bss);
}
static void station_rssi_level_changed(struct station *station,
uint8_t level_idx);
static bool station_try_next_bss(struct station *station)
{
struct scan_bss *next;
int ret;
next = network_bss_select(station->connected_network, false);
if (!next)
return false;
ret = __station_connect_network(station, station->connected_network,
next);
if (ret < 0)
return false;
l_debug("Attempting to connect to next BSS "MAC, MAC_STR(next->addr));
return true;
}
static bool station_retry_with_reason(struct station *station,
uint16_t reason_code)
{
/*
2020-01-21 07:21:38 +01:00
* We don't want to cause a retry and blacklist if the password was
* incorrect. Otherwise we would just continue to fail.
*
* Other reason codes can be added here if its decided we want to
* fail in those cases.
*/
if (reason_code == MMPDU_REASON_CODE_PREV_AUTH_NOT_VALID ||
reason_code == MMPDU_REASON_CODE_IEEE8021X_FAILED)
return false;
blacklist_add_bss(station->connected_bss->addr);
return station_try_next_bss(station);
}
2020-07-31 03:31:27 +02:00
/* A bit more concise for trying to fit these into 80 characters */
#define IS_TEMPORARY_STATUS(code) \
((code) == MMPDU_STATUS_CODE_DENIED_UNSUFFICIENT_BANDWIDTH || \
(code) == MMPDU_STATUS_CODE_DENIED_POOR_CHAN_CONDITIONS || \
(code) == MMPDU_STATUS_CODE_REJECTED_WITH_SUGG_BSS_TRANS || \
(code) == MMPDU_STATUS_CODE_DENIED_NO_MORE_STAS)
static bool station_retry_with_status(struct station *station,
uint16_t status_code)
{
/*
* Certain Auth/Assoc failures should not cause a timeout blacklist.
* In these cases we want to only temporarily blacklist the BSS until
* the connection is complete.
*
* TODO: The WITH_SUGG_BSS_TRANS case should also include a neighbor
* report IE in the frame. This would allow us to target a
* specific BSS on our next attempt. There is currently no way to
* obtain that IE, but this should be done in the future.
*/
if (IS_TEMPORARY_STATUS(status_code))
network_blacklist_add(station->connected_network,
station->connected_bss);
else
blacklist_add_bss(station->connected_bss->addr);
return station_try_next_bss(station);
}
static void station_ft_ds_action_start(struct station *station, uint16_t mdid)
{
const struct l_queue_entry *entry;
struct scan_bss *bss;
struct ie_rsn_info rsn_info;
for (entry = network_bss_list_get_entries(station->connected_network);
entry; entry = entry->next) {
bss = entry->data;
if (bss == station->connected_bss)
continue;
if (mdid != l_get_le16(bss->mde))
continue;
if (scan_bss_get_rsn_info(bss, &rsn_info) < 0)
continue;
if (!IE_AKM_IS_FT(rsn_info.akm_suites))
continue;
/*
* Fire and forget. Netdev will maintain a cache of responses and
* when the time comes these can be referenced for a roam
*/
netdev_fast_transition_over_ds_action(station->netdev, bss);
}
}
static void station_connect_ok(struct station *station)
{
struct handshake_state *hs = netdev_get_handshake(station->netdev);
l_debug("");
if (station->connect_pending) {
struct l_dbus_message *reply =
l_dbus_message_new_method_return(
station->connect_pending);
dbus_pending_reply(&station->connect_pending, reply);
}
/*
* Get a neighbor report now so future roams can avoid waiting for
* a report at that time
*/
if (station->connected_bss->cap_rm_neighbor_report) {
if (netdev_neighbor_report_req(station->netdev,
station_early_neighbor_report_cb) < 0)
l_warn("Could not request neighbor report");
}
/*
* If this network supports FT-over-DS send initial action frames now
* to prepare for future roams.
*/
if (station_can_fast_transition(hs, station->connected_bss) &&
(hs->mde[4] & 1)) {
uint16_t mdid;
if (ie_parse_mobility_domain_from_data(hs->mde, hs->mde[1] + 2,
&mdid, NULL, NULL) < 0)
return;
station_ft_ds_action_start(station, mdid);
}
network_connected(station->connected_network);
if (station->netconfig)
netconfig_configure(station->netconfig,
network_get_settings(
station->connected_network),
netdev_get_address(station->netdev),
station_netconfig_event_handler,
station);
else
station_enter_state(station, STATION_STATE_CONNECTED);
}
static void station_connect_cb(struct netdev *netdev, enum netdev_result result,
void *event_data, void *user_data)
{
struct station *station = user_data;
bool continue_autoconnect;
l_debug("%u, result: %d", netdev_get_ifindex(station->netdev), result);
switch (result) {
case NETDEV_RESULT_OK:
blacklist_remove_bss(station->connected_bss->addr);
station_connect_ok(station);
return;
case NETDEV_RESULT_HANDSHAKE_FAILED:
/* reason code in this case */
if (station_retry_with_reason(station, l_get_u16(event_data)))
return;
break;
case NETDEV_RESULT_AUTHENTICATION_FAILED:
case NETDEV_RESULT_ASSOCIATION_FAILED:
/* status code in this case */
if (station_retry_with_status(station, l_get_u16(event_data)))
return;
break;
default:
break;
}
if (station->connect_pending) {
struct l_dbus_message *reply;
if (result == NETDEV_RESULT_ABORTED)
reply = dbus_error_aborted(station->connect_pending);
else
reply = dbus_error_failed(station->connect_pending);
dbus_pending_reply(&station->connect_pending, reply);
}
if (result == NETDEV_RESULT_ABORTED)
return;
continue_autoconnect = station->state == STATION_STATE_CONNECTING_AUTO;
if (station->state == STATION_STATE_CONNECTING) {
bool during_eapol = result == NETDEV_RESULT_HANDSHAKE_FAILED;
network_connect_failed(station->connected_network,
during_eapol);
}
station_reset_connection_state(station);
station_enter_state(station, STATION_STATE_DISCONNECTED);
if (continue_autoconnect) {
if (station_autoconnect_next(station) < 0) {
l_debug("Nothing left on autoconnect list");
station_enter_state(station,
STATION_STATE_AUTOCONNECT_FULL);
}
return;
}
if (station->autoconnect)
station_enter_state(station, STATION_STATE_AUTOCONNECT_QUICK);
}
static void station_disconnect_event(struct station *station, void *event_data)
{
l_debug("%u", netdev_get_ifindex(station->netdev));
/*
* If we're connecting, AP deauthenticated us, most likely because
* we provided the wrong password or otherwise failed authentication
* during the handshaking phase. Treat this as a connection failure
*/
switch (station->state) {
case STATION_STATE_CONNECTING:
case STATION_STATE_CONNECTING_AUTO:
station_connect_cb(station->netdev,
NETDEV_RESULT_HANDSHAKE_FAILED,
event_data, station);
return;
case STATION_STATE_CONNECTED:
station_disassociated(station);
return;
default:
break;
}
l_warn("Unexpected disconnect event");
}
static void station_netdev_event(struct netdev *netdev, enum netdev_event event,
void *event_data, void *user_data)
{
struct station *station = user_data;
switch (event) {
case NETDEV_EVENT_AUTHENTICATING:
l_debug("Authenticating");
break;
case NETDEV_EVENT_ASSOCIATING:
l_debug("Associating");
break;
case NETDEV_EVENT_DISCONNECT_BY_AP:
case NETDEV_EVENT_DISCONNECT_BY_SME:
station_disconnect_event(station, event_data);
break;
case NETDEV_EVENT_RSSI_THRESHOLD_LOW:
station_low_rssi(station);
break;
case NETDEV_EVENT_RSSI_THRESHOLD_HIGH:
station_ok_rssi(station);
break;
case NETDEV_EVENT_RSSI_LEVEL_NOTIFY:
station_rssi_level_changed(station, l_get_u8(event_data));
break;
case NETDEV_EVENT_ROAMING:
station_enter_state(station, STATION_STATE_ROAMING);
break;
case NETDEV_EVENT_ROAMED:
station_event_roamed(station, (struct scan_bss *) event_data);
break;
case NETDEV_EVENT_CHANNEL_SWITCHED:
station_event_channel_switched(station, l_get_u32(event_data));
break;
}
}
int __station_connect_network(struct station *station, struct network *network,
struct scan_bss *bss)
{
const struct iovec *extra_ies;
size_t iov_elems = 0;
struct handshake_state *hs;
int r;
hs = station_handshake_setup(station, network, bss);
if (!hs)
return -ENOTSUP;
extra_ies = network_get_extra_ies(network, &iov_elems);
r = netdev_connect(station->netdev, bss, hs, extra_ies,
iov_elems, station_netdev_event,
station_connect_cb, station);
if (r < 0) {
handshake_state_free(hs);
return r;
}
l_debug("connecting to BSS "MAC, MAC_STR(bss->addr));
station->connected_bss = bss;
station->connected_network = network;
return 0;
}
static void station_disconnect_onconnect_cb(struct netdev *netdev, bool success,
void *user_data)
{
struct station *station = user_data;
int err;
station_enter_state(station, STATION_STATE_DISCONNECTED);
err = __station_connect_network(station,
station->connect_pending_network,
station->connect_pending_bss);
station->connect_pending_network = NULL;
station->connect_pending_bss = NULL;
if (err < 0) {
dbus_pending_reply(&station->connect_pending,
dbus_error_from_errno(err,
station->connect_pending));
return;
}
station_enter_state(station, STATION_STATE_CONNECTING);
}
static void station_disconnect_onconnect(struct station *station,
struct network *network,
struct scan_bss *bss,
struct l_dbus_message *message)
{
if (netdev_disconnect(station->netdev, station_disconnect_onconnect_cb,
station) < 0) {
l_dbus_send(dbus_get_bus(),
dbus_error_from_errno(-EIO, message));
return;
}
if (station->netconfig)
netconfig_reset(station->netconfig);
station_reset_connection_state(station);
station_enter_state(station, STATION_STATE_DISCONNECTING);
station->connect_pending_network = network;
station->connect_pending_bss = bss;
station->connect_pending = l_dbus_message_ref(message);
}
void station_connect_network(struct station *station, struct network *network,
struct scan_bss *bss,
struct l_dbus_message *message)
{
struct l_dbus *dbus = dbus_get_bus();
int err;
/*
* If a hidden scan is not completed, station_is_busy would not
* indicate anything is going on so we need to cancel the scan and
* fail the connection now.
*/
if (station->hidden_network_scan_id) {
scan_cancel(netdev_get_wdev_id(station->netdev),
station->hidden_network_scan_id);
dbus_pending_reply(&station->hidden_pending,
dbus_error_failed(station->hidden_pending));
}
if (station->quick_scan_id) {
scan_cancel(netdev_get_wdev_id(station->netdev),
station->quick_scan_id);
station->quick_scan_id = 0;
station_property_set_scanning(station, false);
}
if (station_is_busy(station)) {
station_disconnect_onconnect(station, network, bss, message);
return;
}
err = __station_connect_network(station, network, bss);
if (err < 0)
goto error;
station_enter_state(station, STATION_STATE_CONNECTING);
station->connect_pending = l_dbus_message_ref(message);
station->autoconnect = true;
return;
error:
l_dbus_send(dbus, dbus_error_from_errno(err, message));
}
static void station_hidden_network_scan_triggered(int err, void *user_data)
{
struct station *station = user_data;
l_debug("");
if (!err)
return;
dbus_pending_reply(&station->hidden_pending,
dbus_error_failed(station->hidden_pending));
}
static bool station_hidden_network_scan_results(int err,
struct l_queue *bss_list,
const struct scan_freq_set *freqs,
void *userdata)
{
struct station *station = userdata;
struct network *network_psk;
struct network *network_open;
const char *ssid;
uint8_t ssid_len;
struct l_dbus_message *msg;
struct l_dbus_message *error;
struct scan_bss *bss;
l_debug("");
msg = station->hidden_pending;
station->hidden_pending = NULL;
/* Zero this now so station_connect_network knows the scan is done */
station->hidden_network_scan_id = 0;
if (err) {
dbus_pending_reply(&msg, dbus_error_failed(msg));
return false;
}
if (!l_dbus_message_get_arguments(msg, "s", &ssid)) {
dbus_pending_reply(&msg, dbus_error_invalid_args(msg));
return false;
}
ssid_len = strlen(ssid);
while ((bss = l_queue_pop_head(bss_list))) {
if (bss->ssid_len != ssid_len ||
memcmp(bss->ssid, ssid, ssid_len))
goto next;
/*
* Override time_stamp so that this entry is removed on
* the next scan
*/
bss->time_stamp = 0;
if (station_add_seen_bss(station, bss)) {
l_queue_push_tail(station->bss_list, bss);
continue;
}
next:
scan_bss_free(bss);
}
l_queue_destroy(bss_list, NULL);
network_psk = station_network_find(station, ssid, SECURITY_PSK);
network_open = station_network_find(station, ssid, SECURITY_NONE);
if (!network_psk && !network_open) {
dbus_pending_reply(&msg, dbus_error_not_found(msg));
return true;
}
if (network_psk && network_open) {
dbus_pending_reply(&msg, dbus_error_service_set_overlap(msg));
return true;
}
error = network_connect_new_hidden_network(network_psk ?: network_open,
msg);
if (error)
dbus_pending_reply(&msg, error);
else
l_dbus_message_unref(msg);
return true;
}
static void station_hidden_network_scan_destroy(void *userdata)
{
struct station *station = userdata;
station->hidden_network_scan_id = 0;
}
static struct l_dbus_message *station_dbus_connect_hidden_network(
struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
uint64_t id = netdev_get_wdev_id(station->netdev);
struct scan_parameters params = {
.flush = true,
.randomize_mac_addr_hint = false,
};
const char *ssid;
struct network *network;
l_debug("");
if (station->hidden_pending)
return dbus_error_busy(message);
if (!l_dbus_message_get_arguments(message, "s", &ssid))
return dbus_error_invalid_args(message);
if (strlen(ssid) > 32)
return dbus_error_invalid_args(message);
if (known_networks_find(ssid, SECURITY_PSK) ||
known_networks_find(ssid, SECURITY_NONE))
return dbus_error_already_provisioned(message);
network = station_network_find(station, ssid, SECURITY_PSK);
if (!network)
network = station_network_find(station, ssid, SECURITY_NONE);
/*
* This checks for a corner case where the hidden network was already
* found and is in our scan results, but the initial connection failed.
* For example, the password was given incorrectly. In this case the
* entry will also be found on the hidden bss list.
*/
if (network) {
const struct l_queue_entry *entry =
l_queue_get_entries(station->hidden_bss_list_sorted);
struct scan_bss *target = network_bss_select(network, true);
for (; entry; entry = entry->next) {
struct scan_bss *bss = entry->data;
if (!scan_bss_addr_eq(target, bss))
continue;
/* We can skip the scan and try to connect right away */
return network_connect_new_hidden_network(network,
message);
}
return dbus_error_not_hidden(message);
}
params.ssid = ssid;
/* HW cannot randomize our MAC if connected */
if (!station->connected_bss)
params.randomize_mac_addr_hint = true;
station->hidden_network_scan_id = scan_active_full(id, &params,
station_hidden_network_scan_triggered,
station_hidden_network_scan_results,
station, station_hidden_network_scan_destroy);
if (!station->hidden_network_scan_id)
return dbus_error_failed(message);
station->hidden_pending = l_dbus_message_ref(message);
return NULL;
}
static void station_disconnect_reconnect_cb(struct netdev *netdev, bool success,
void *user_data)
{
struct station *station = user_data;
if (__station_connect_network(station, station->connected_network,
station->connected_bss) < 0)
station_disassociated(station);
}
static void station_reconnect(struct station *station)
{
/*
* Rather than doing 4 or so state changes, lets just go into
* roaming for the duration of this reconnect.
*/
station_enter_state(station, STATION_STATE_ROAMING);
netdev_disconnect(station->netdev, station_disconnect_reconnect_cb,
station);
}
static void station_disconnect_cb(struct netdev *netdev, bool success,
void *user_data)
{
struct station *station = user_data;
l_debug("%u, success: %d",
netdev_get_ifindex(station->netdev), success);
if (station->disconnect_pending) {
struct l_dbus_message *reply;
if (success) {
reply = l_dbus_message_new_method_return(
station->disconnect_pending);
l_dbus_message_set_arguments(reply, "");
} else
reply = dbus_error_failed(station->disconnect_pending);
dbus_pending_reply(&station->disconnect_pending, reply);
}
station_enter_state(station, STATION_STATE_DISCONNECTED);
if (station->autoconnect)
station_enter_state(station, STATION_STATE_AUTOCONNECT_QUICK);
}
int station_disconnect(struct station *station)
{
if (station->state == STATION_STATE_DISCONNECTING)
return -EBUSY;
if (!station->connected_bss)
return -ENOTCONN;
if (station->netconfig)
netconfig_reset(station->netconfig);
/*
* If the disconnect somehow fails we won't know if we're still
* connected so we may as well indicate now that we're no longer
* connected.
*/
station_reset_connection_state(station);
station_enter_state(station, STATION_STATE_DISCONNECTING);
if (netdev_disconnect(station->netdev,
station_disconnect_cb, station) < 0)
return -EIO;
return 0;
}
2018-09-15 04:17:57 +02:00
static struct l_dbus_message *station_dbus_disconnect(struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
int result;
l_debug("");
/*
* Disconnect was triggered by the user, don't autoconnect. Wait for
* the user's explicit instructions to scan and connect to the network
*/
station_set_autoconnect(station, false);
if (station->hidden_network_scan_id) {
scan_cancel(netdev_get_wdev_id(station->netdev),
station->hidden_network_scan_id);
dbus_pending_reply(&station->hidden_pending,
dbus_error_aborted(station->hidden_pending));
return l_dbus_message_new_method_return(message);
}
if (!station_is_busy(station))
return l_dbus_message_new_method_return(message);
result = station_disconnect(station);
if (result < 0)
return dbus_error_from_errno(result, message);
station->disconnect_pending = l_dbus_message_ref(message);
return NULL;
}
static struct l_dbus_message *station_dbus_get_networks(struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
struct l_dbus_message *reply =
l_dbus_message_new_method_return(message);
struct l_dbus_message_builder *builder =
l_dbus_message_builder_new(reply);
struct l_queue *sorted = station->networks_sorted;
const struct l_queue_entry *entry;
l_dbus_message_builder_enter_array(builder, "(on)");
for (entry = l_queue_get_entries(sorted); entry; entry = entry->next) {
const struct network *network = entry->data;
int16_t signal_strength = network_get_signal_strength(network);
l_dbus_message_builder_enter_struct(builder, "on");
l_dbus_message_builder_append_basic(builder, 'o',
network_get_path(network));
l_dbus_message_builder_append_basic(builder, 'n',
&signal_strength);
l_dbus_message_builder_leave_struct(builder);
}
l_dbus_message_builder_leave_array(builder);
l_dbus_message_builder_finalize(builder);
l_dbus_message_builder_destroy(builder);
return reply;
}
static struct l_dbus_message *station_dbus_get_hidden_access_points(
struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
struct l_dbus_message *reply =
l_dbus_message_new_method_return(message);
struct l_dbus_message_builder *builder =
l_dbus_message_builder_new(reply);
const struct l_queue_entry *entry;
l_dbus_message_builder_enter_array(builder, "(sns)");
for (entry = l_queue_get_entries(station->hidden_bss_list_sorted);
entry; entry = entry->next) {
struct scan_bss *bss = entry->data;
int16_t signal_strength = bss->signal_strength;
struct ie_rsn_info info;
enum security security;
int r;
memset(&info, 0, sizeof(info));
r = scan_bss_get_rsn_info(bss, &info);
if (r < 0) {
if (r != -ENOENT)
continue;
security = security_determine(bss->capability, NULL);
} else {
security = security_determine(bss->capability, &info);
}
l_dbus_message_builder_enter_struct(builder, "sns");
l_dbus_message_builder_append_basic(builder, 's',
util_address_to_string(bss->addr));
l_dbus_message_builder_append_basic(builder, 'n',
&signal_strength);
l_dbus_message_builder_append_basic(builder, 's',
security_to_str(security));
l_dbus_message_builder_leave_struct(builder);
}
l_dbus_message_builder_leave_array(builder);
l_dbus_message_builder_finalize(builder);
l_dbus_message_builder_destroy(builder);
return reply;
}
static void station_dbus_scan_done(struct station *station)
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
{
station->dbus_scan_id = 0;
station_property_set_scanning(station, false);
}
static void station_dbus_scan_triggered(int err, void *user_data)
{
struct station *station = user_data;
struct l_dbus_message *reply;
l_debug("station_scan_triggered: %i", err);
if (err < 0) {
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
if (station->scan_pending) {
reply = dbus_error_from_errno(err,
station->scan_pending);
dbus_pending_reply(&station->scan_pending, reply);
}
station_dbus_scan_done(station);
return;
}
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
l_debug("Scan triggered for %s subset %i",
netdev_get_name(station->netdev),
station->dbus_scan_subset_idx);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
if (station->scan_pending) {
reply = l_dbus_message_new_method_return(station->scan_pending);
l_dbus_message_set_arguments(reply, "");
dbus_pending_reply(&station->scan_pending, reply);
}
station_property_set_scanning(station, true);
}
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
static bool station_dbus_scan_subset(struct station *station);
static bool station_dbus_scan_results(int err, struct l_queue *bss_list,
const struct scan_freq_set *freqs,
void *userdata)
{
struct station *station = userdata;
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
unsigned int next_idx = station->dbus_scan_subset_idx + 1;
bool autoconnect;
bool last_subset;
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
if (err) {
station_dbus_scan_done(station);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
return false;
}
autoconnect = station_is_autoconnecting(station);
station_set_scan_results(station, bss_list, freqs, autoconnect);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
last_subset = next_idx >= L_ARRAY_SIZE(station->scan_freqs_order) ||
station->scan_freqs_order[next_idx] == NULL;
station->dbus_scan_subset_idx = next_idx;
if (last_subset || !station_dbus_scan_subset(station))
station_dbus_scan_done(station);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
return true;
}
static bool station_dbus_scan_subset(struct station *station)
{
unsigned int idx = station->dbus_scan_subset_idx;
station->dbus_scan_id = station_scan_trigger(station,
station->scan_freqs_order[idx],
station_dbus_scan_triggered,
station_dbus_scan_results,
NULL);
return station->dbus_scan_id != 0;
}
2018-09-15 04:21:47 +02:00
static struct l_dbus_message *station_dbus_scan(struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
l_debug("Scan called from DBus");
if (station->dbus_scan_id)
return dbus_error_busy(message);
if (station->state == STATION_STATE_CONNECTING ||
station->state == STATION_STATE_CONNECTING_AUTO)
return dbus_error_busy(message);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
station->dbus_scan_subset_idx = 0;
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
if (!station_dbus_scan_subset(station))
return dbus_error_failed(message);
station->scan_pending = l_dbus_message_ref(message);
return NULL;
}
struct signal_agent {
char *owner;
char *path;
unsigned int disconnect_watch;
};
static void station_signal_agent_notify(struct signal_agent *agent,
const char *device_path, uint8_t level)
{
struct l_dbus_message *msg;
msg = l_dbus_message_new_method_call(dbus_get_bus(),
agent->owner, agent->path,
IWD_SIGNAL_AGENT_INTERFACE,
"Changed");
l_dbus_message_set_arguments(msg, "oy", device_path, level);
l_dbus_message_set_no_reply(msg, true);
l_dbus_send(dbus_get_bus(), msg);
}
static void station_rssi_level_changed(struct station *station,
uint8_t level_idx)
{
struct netdev *netdev = station->netdev;
if (!station->signal_agent)
return;
station_signal_agent_notify(station->signal_agent,
netdev_get_path(netdev), level_idx);
}
static void station_signal_agent_release(struct signal_agent *agent,
const char *device_path)
{
struct l_dbus_message *msg;
msg = l_dbus_message_new_method_call(dbus_get_bus(),
agent->owner, agent->path,
IWD_SIGNAL_AGENT_INTERFACE,
"Release");
l_dbus_message_set_arguments(msg, "o", device_path);
l_dbus_message_set_no_reply(msg, true);
l_dbus_send(dbus_get_bus(), msg);
}
static void signal_agent_free(void *data)
{
struct signal_agent *agent = data;
l_free(agent->owner);
l_free(agent->path);
l_dbus_remove_watch(dbus_get_bus(), agent->disconnect_watch);
l_free(agent);
}
static void signal_agent_disconnect(struct l_dbus *dbus, void *user_data)
{
struct station *station = user_data;
l_debug("signal_agent %s disconnected", station->signal_agent->owner);
l_idle_oneshot(signal_agent_free, station->signal_agent, NULL);
station->signal_agent = NULL;
netdev_set_rssi_report_levels(station->netdev, NULL, 0);
}
static struct l_dbus_message *station_dbus_signal_agent_register(
struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
const char *path, *sender;
struct l_dbus_message_iter level_iter;
int8_t levels[16];
int err;
int16_t val;
size_t count = 0;
if (station->signal_agent)
return dbus_error_already_exists(message);
l_debug("signal agent register called");
if (!l_dbus_message_get_arguments(message, "oan", &path, &level_iter))
return dbus_error_invalid_args(message);
while (l_dbus_message_iter_next_entry(&level_iter, &val)) {
if (count >= L_ARRAY_SIZE(levels) || val > 127 || val < -127)
return dbus_error_invalid_args(message);
levels[count++] = val;
}
if (count < 1)
return dbus_error_invalid_args(message);
err = netdev_set_rssi_report_levels(station->netdev, levels, count);
if (err == -ENOTSUP)
return dbus_error_not_supported(message);
else if (err < 0)
return dbus_error_failed(message);
sender = l_dbus_message_get_sender(message);
station->signal_agent = l_new(struct signal_agent, 1);
station->signal_agent->owner = l_strdup(sender);
station->signal_agent->path = l_strdup(path);
station->signal_agent->disconnect_watch =
l_dbus_add_disconnect_watch(dbus, sender,
signal_agent_disconnect,
station, NULL);
l_debug("agent %s path %s", sender, path);
/*
* TODO: send an initial notification in a oneshot idle callback,
* if state is connected.
*/
return l_dbus_message_new_method_return(message);
}
static struct l_dbus_message *station_dbus_signal_agent_unregister(
struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
const char *path, *sender;
if (!station->signal_agent)
return dbus_error_failed(message);
l_debug("signal agent unregister");
if (!l_dbus_message_get_arguments(message, "o", &path))
return dbus_error_invalid_args(message);
if (strcmp(station->signal_agent->path, path))
return dbus_error_not_found(message);
sender = l_dbus_message_get_sender(message);
if (strcmp(station->signal_agent->owner, sender))
return dbus_error_not_found(message);
signal_agent_free(station->signal_agent);
station->signal_agent = NULL;
netdev_set_rssi_report_levels(station->netdev, NULL, 0);
return l_dbus_message_new_method_return(message);
}
static bool station_property_get_connected_network(struct l_dbus *dbus,
struct l_dbus_message *message,
struct l_dbus_message_builder *builder,
void *user_data)
{
struct station *station = user_data;
if (!station->connected_network)
return false;
l_dbus_message_builder_append_basic(builder, 'o',
network_get_path(station->connected_network));
return true;
}
static bool station_property_get_scanning(struct l_dbus *dbus,
struct l_dbus_message *message,
struct l_dbus_message_builder *builder,
void *user_data)
{
struct station *station = user_data;
bool scanning = station->scanning;
l_dbus_message_builder_append_basic(builder, 'b', &scanning);
return true;
}
static bool station_property_get_state(struct l_dbus *dbus,
struct l_dbus_message *message,
struct l_dbus_message_builder *builder,
void *user_data)
{
struct station *station = user_data;
const char *statestr = "invalid";
switch (station->state) {
case STATION_STATE_AUTOCONNECT_QUICK:
case STATION_STATE_AUTOCONNECT_FULL:
case STATION_STATE_DISCONNECTED:
statestr = "disconnected";
break;
case STATION_STATE_CONNECTING:
case STATION_STATE_CONNECTING_AUTO:
statestr = "connecting";
break;
case STATION_STATE_CONNECTED:
statestr = "connected";
break;
case STATION_STATE_DISCONNECTING:
statestr = "disconnecting";
break;
case STATION_STATE_ROAMING:
statestr = "roaming";
break;
}
l_dbus_message_builder_append_basic(builder, 's', statestr);
return true;
}
void station_foreach(station_foreach_func_t func, void *user_data)
{
const struct l_queue_entry *entry;
for (entry = l_queue_get_entries(station_list); entry;
entry = entry->next) {
struct station *station = entry->data;
func(station, user_data);
}
}
2018-09-03 05:15:41 +02:00
struct station *station_find(uint32_t ifindex)
{
const struct l_queue_entry *entry;
for (entry = l_queue_get_entries(station_list); entry;
entry = entry->next) {
struct station *station = entry->data;
if (netdev_get_ifindex(station->netdev) == ifindex)
return station;
}
return NULL;
}
struct network_foreach_data {
station_network_foreach_func_t func;
void *user_data;
};
static void network_foreach(const void *key, void *value, void *user_data)
{
struct network_foreach_data *data = user_data;
struct network *network = value;
data->func(network, data->user_data);
}
void station_network_foreach(struct station *station,
station_network_foreach_func_t func,
void *user_data)
{
struct network_foreach_data data = {
.func = func,
.user_data = user_data,
};
l_hashmap_foreach(station->networks, network_foreach, &data);
}
struct l_queue *station_get_bss_list(struct station *station)
{
return station->bss_list;
}
struct scan_bss *station_get_connected_bss(struct station *station)
{
return station->connected_bss;
}
int station_hide_network(struct station *station, struct network *network)
{
const char *path = network_get_path(network);
struct scan_bss *bss;
l_debug("%s", path);
if (station->connected_network == network)
return -EBUSY;
if (!l_hashmap_lookup(station->networks, path))
return -ENOENT;
l_queue_remove(station->networks_sorted, network);
l_hashmap_remove(station->networks, path);
while ((bss = network_bss_list_pop(network))) {
memset(bss->ssid, 0, bss->ssid_len);
l_queue_remove_if(station->hidden_bss_list_sorted,
bss_match_bssid, bss->addr);
l_queue_insert(station->hidden_bss_list_sorted, bss,
bss_signal_strength_compare, NULL);
}
network_remove(network, -ESRCH);
return 0;
}
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
static void station_add_one_freq(uint32_t freq, void *user_data)
{
struct station *station = user_data;
if (freq > 3000)
scan_freq_set_add(station->scan_freqs_order[1], freq);
else if (!scan_freq_set_contains(station->scan_freqs_order[0], freq))
scan_freq_set_add(station->scan_freqs_order[2], freq);
}
static void station_fill_scan_freq_subsets(struct station *station)
{
const struct scan_freq_set *supported =
wiphy_get_supported_freqs(station->wiphy);
/*
* Scan the 2.4GHz "social channels" first, 5GHz second, if supported,
* all other 2.4GHz channels last. To be refined as needed.
*/
station->scan_freqs_order[0] = scan_freq_set_new();
scan_freq_set_add(station->scan_freqs_order[0], 2412);
scan_freq_set_add(station->scan_freqs_order[0], 2437);
scan_freq_set_add(station->scan_freqs_order[0], 2462);
station->scan_freqs_order[1] = scan_freq_set_new();
station->scan_freqs_order[2] = scan_freq_set_new();
scan_freq_set_foreach(supported, station_add_one_freq, station);
if (scan_freq_set_isempty(station->scan_freqs_order[1])) {
scan_freq_set_free(station->scan_freqs_order[1]);
station->scan_freqs_order[1] = station->scan_freqs_order[2];
station->scan_freqs_order[2] = NULL;
}
}
static struct station *station_create(struct netdev *netdev)
2018-08-31 20:24:26 +02:00
{
struct station *station;
struct l_dbus *dbus = dbus_get_bus();
2018-08-31 20:24:26 +02:00
station = l_new(struct station, 1);
watchlist_init(&station->state_watches, NULL);
2018-08-31 20:24:26 +02:00
station->bss_list = l_queue_new();
station->hidden_bss_list_sorted = l_queue_new();
station->networks = l_hashmap_new();
l_hashmap_set_hash_function(station->networks, l_str_hash);
l_hashmap_set_compare_function(station->networks,
(l_hashmap_compare_func_t) strcmp);
station->networks_sorted = l_queue_new();
station->wiphy = netdev_get_wiphy(netdev);
2018-08-31 20:24:26 +02:00
station->netdev = netdev;
l_queue_push_head(station_list, station);
station_set_autoconnect(station, true);
l_dbus_object_add_interface(dbus, netdev_get_path(netdev),
IWD_STATION_INTERFACE, station);
if (netconfig_enabled)
station->netconfig = netconfig_new(netdev_get_ifindex(netdev));
station->anqp_pending = l_queue_new();
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
station_fill_scan_freq_subsets(station);
2018-08-31 20:24:26 +02:00
return station;
}
static void station_free(struct station *station)
2018-08-31 20:24:26 +02:00
{
l_debug("");
if (!l_queue_remove(station_list, station))
return;
l_dbus_object_remove_interface(dbus_get_bus(),
netdev_get_path(station->netdev),
IWD_STATION_DIAGNOSTIC_INTERFACE);
if (station->netconfig) {
netconfig_destroy(station->netconfig);
station->netconfig = NULL;
}
periodic_scan_stop(station);
if (station->signal_agent) {
station_signal_agent_release(station->signal_agent,
netdev_get_path(station->netdev));
signal_agent_free(station->signal_agent);
}
if (station->connect_pending)
dbus_pending_reply(&station->connect_pending,
dbus_error_aborted(station->connect_pending));
if (station->hidden_pending)
dbus_pending_reply(&station->hidden_pending,
dbus_error_aborted(station->hidden_pending));
if (station->disconnect_pending)
dbus_pending_reply(&station->disconnect_pending,
dbus_error_aborted(station->disconnect_pending));
if (station->scan_pending)
dbus_pending_reply(&station->scan_pending,
dbus_error_aborted(station->scan_pending));
if (station->dbus_scan_id)
scan_cancel(netdev_get_wdev_id(station->netdev),
station->dbus_scan_id);
if (station->quick_scan_id)
scan_cancel(netdev_get_wdev_id(station->netdev),
station->quick_scan_id);
if (station->hidden_network_scan_id)
scan_cancel(netdev_get_wdev_id(station->netdev),
station->hidden_network_scan_id);
station_roam_state_clear(station);
l_queue_destroy(station->networks_sorted, NULL);
l_hashmap_destroy(station->networks, network_free);
l_queue_destroy(station->bss_list, bss_free);
l_queue_destroy(station->hidden_bss_list_sorted, NULL);
l_queue_destroy(station->autoconnect_list, NULL);
watchlist_destroy(&station->state_watches);
l_queue_destroy(station->anqp_pending, remove_anqp);
station: Split DBus scans into 3 frequency subsets A scan normally takes about 2 seconds on my dual-band wifi adapter when connected. The drivers will normally probe on each supported channel in some unspecified order and will have new partial results after each step but the kernel sends NL80211_CMD_NEW_SCAN_RESULTS only when the full scan request finishes, and for segmented scans we will wait for all segments to finish before calling back from scan_active() or scan_passive(). To improve user experience define our own channel order favouring the 2.4 channels 1, 6 and 11 and probe those as an individual scan request so we can update most our DBus org.connman.iwd.Network objects more quickly, before continuing with 5GHz band channels, updating DBus objects again and finally the other 2.4GHz band channels. The overall DBus-triggered scan on my wifi adapter takes about the same time but my measurements were not very strict, and were not very consistent with and without this change. With the change most Network objects are updated after about 200ms though, meaning that I get most of the network updates in the nm-applet UI 200ms from opening the network list. The 5GHz band channels take another 1 to 1.5s to scan and remaining 2.4GHz band channels another ~300ms. Hopefully this is similar when using other drivers although I can easily imagine a driver that parallelizes 2.4GHz and 5GHz channel probing using two radios, or uses 2, 4 or another number of dual-band radios to probe 2, 4, ... channels simultanously. We'd then lose some of the performance benefit. The faster scan results may be worth the longer overall scan time anyway. I'm also assuming that the wiphy's supported frequency list is exactly what was scanned when we passed no frequency list to NL80211_CMD_TRIGGER_SCAN and we won't get errors for passing some frequency that shouldn't have been scanned.
2020-12-17 02:28:58 +01:00
scan_freq_set_free(station->scan_freqs_order[0]);
scan_freq_set_free(station->scan_freqs_order[1]);
if (station->scan_freqs_order[2])
scan_freq_set_free(station->scan_freqs_order[2]);
2018-08-31 20:24:26 +02:00
l_free(station);
}
static void station_setup_interface(struct l_dbus_interface *interface)
{
l_dbus_interface_method(interface, "ConnectHiddenNetwork", 0,
station_dbus_connect_hidden_network,
"", "s", "name");
l_dbus_interface_method(interface, "Disconnect", 0,
station_dbus_disconnect, "", "");
l_dbus_interface_method(interface, "GetOrderedNetworks", 0,
station_dbus_get_networks, "a(on)", "",
"networks");
l_dbus_interface_method(interface, "GetHiddenAccessPoints", 0,
station_dbus_get_hidden_access_points,
"a(sns)", "",
"accesspoints");
l_dbus_interface_method(interface, "Scan", 0,
station_dbus_scan, "", "");
l_dbus_interface_method(interface, "RegisterSignalLevelAgent", 0,
station_dbus_signal_agent_register,
"", "oan", "path", "levels");
l_dbus_interface_method(interface, "UnregisterSignalLevelAgent", 0,
station_dbus_signal_agent_unregister,
"", "o", "path");
l_dbus_interface_property(interface, "ConnectedNetwork", 0, "o",
station_property_get_connected_network,
NULL);
l_dbus_interface_property(interface, "Scanning", 0, "b",
station_property_get_scanning, NULL);
l_dbus_interface_property(interface, "State", 0, "s",
station_property_get_state, NULL);
}
static void station_destroy_interface(void *user_data)
{
struct station *station = user_data;
station_free(station);
}
static void station_get_diagnostic_cb(
const struct diagnostic_station_info *info,
void *user_data)
{
struct station *station = user_data;
struct l_dbus_message *reply;
struct l_dbus_message_builder *builder;
struct handshake_state *hs = netdev_get_handshake(station->netdev);
if (!info) {
reply = dbus_error_aborted(station->get_station_pending);
goto done;
}
reply = l_dbus_message_new_method_return(station->get_station_pending);
builder = l_dbus_message_builder_new(reply);
l_dbus_message_builder_enter_array(builder, "{sv}");
dbus_append_dict_basic(builder, "ConnectedBss", 's',
util_address_to_string(info->addr));
dbus_append_dict_basic(builder, "Frequency", 'u',
&station->connected_bss->frequency);
dbus_append_dict_basic(builder, "Security", 's',
diagnostic_akm_suite_to_security(hs->akm_suite,
hs->wpa_ie));
diagnostic_info_to_dict(info, builder);
l_dbus_message_builder_leave_array(builder);
l_dbus_message_builder_finalize(builder);
l_dbus_message_builder_destroy(builder);
done:
dbus_pending_reply(&station->get_station_pending, reply);
}
static void station_get_diagnostic_destroy(void *user_data)
{
struct station *station = user_data;
struct l_dbus_message *reply;
if (station->get_station_pending) {
reply = dbus_error_aborted(station->get_station_pending);
dbus_pending_reply(&station->get_station_pending, reply);
}
}
static struct l_dbus_message *station_get_diagnostics(struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
int ret;
if (station->get_station_pending)
return dbus_error_busy(message);
ret = netdev_get_current_station(station->netdev,
station_get_diagnostic_cb, station,
station_get_diagnostic_destroy);
if (ret < 0)
return dbus_error_from_errno(ret, message);
station->get_station_pending = l_dbus_message_ref(message);
return NULL;
}
static struct l_dbus_message *station_force_roam(struct l_dbus *dbus,
struct l_dbus_message *message,
void *user_data)
{
struct station *station = user_data;
struct scan_bss *target;
struct l_dbus_message_iter iter;
uint8_t *mac;
uint32_t mac_len;
if (!l_dbus_message_get_arguments(message, "ay", &iter))
goto invalid_args;
if (!l_dbus_message_iter_get_fixed_array(&iter, &mac, &mac_len))
goto invalid_args;
if (mac_len != 6)
return dbus_error_invalid_args(message);
target = network_bss_find_by_addr(station->connected_network, mac);
if (!target || target == station->connected_bss)
return dbus_error_invalid_args(message);
l_debug("Attempting forced roam to BSS "MAC, MAC_STR(mac));
station_transition_start(station, target);
return l_dbus_message_new_method_return(message);
invalid_args:
return dbus_error_invalid_args(message);
}
static void station_setup_diagnostic_interface(
struct l_dbus_interface *interface)
{
l_dbus_interface_method(interface, "GetDiagnostics", 0,
station_get_diagnostics, "a{sv}", "",
"diagnostics");
if (iwd_is_developer_mode())
l_dbus_interface_method(interface, "Roam", 0,
station_force_roam, "", "ay", "mac");
}
static void station_destroy_diagnostic_interface(void *user_data)
{
}
static void ap_roam_frame_event(const struct mmpdu_header *hdr,
const void *body, size_t body_len,
int rssi, void *user_data)
{
uint32_t ifindex = L_PTR_TO_UINT(user_data);
struct station *station = station_find(ifindex);
if (!station)
return;
station_ap_directed_roam(station, hdr, body, body_len);
}
static void add_frame_watches(struct netdev *netdev)
{
static const uint8_t action_ap_roam_prefix[2] = { 0x0a, 0x07 };
/*
* register for AP roam transition watch
*/
frame_watch_add(netdev_get_wdev_id(netdev), 0, 0x00d0,
action_ap_roam_prefix, sizeof(action_ap_roam_prefix),
ap_roam_frame_event,
L_UINT_TO_PTR(netdev_get_ifindex(netdev)), NULL);
}
static void station_netdev_watch(struct netdev *netdev,
enum netdev_watch_event event, void *userdata)
{
switch (event) {
case NETDEV_WATCH_EVENT_NEW:
if (netdev_get_iftype(netdev) == NETDEV_IFTYPE_STATION) {
add_frame_watches(netdev);
if (netdev_get_is_up(netdev))
station_create(netdev);
}
break;
case NETDEV_WATCH_EVENT_UP:
if (netdev_get_iftype(netdev) == NETDEV_IFTYPE_STATION)
station_create(netdev);
break;
case NETDEV_WATCH_EVENT_DOWN:
case NETDEV_WATCH_EVENT_DEL:
l_dbus_object_remove_interface(dbus_get_bus(),
netdev_get_path(netdev),
IWD_STATION_INTERFACE);
break;
case NETDEV_WATCH_EVENT_IFTYPE_CHANGE:
if (netdev_get_iftype(netdev) == NETDEV_IFTYPE_STATION)
add_frame_watches(netdev);
break;
default:
break;
}
}
2019-05-22 17:05:45 +02:00
static int station_init(void)
2018-08-31 20:24:26 +02:00
{
station_list = l_queue_new();
netdev_watch = netdev_watch_add(station_netdev_watch, NULL, NULL);
l_dbus_register_interface(dbus_get_bus(), IWD_STATION_INTERFACE,
station_setup_interface,
station_destroy_interface, false);
l_dbus_register_interface(dbus_get_bus(),
IWD_STATION_DIAGNOSTIC_INTERFACE,
station_setup_diagnostic_interface,
station_destroy_diagnostic_interface,
false);
2019-10-25 04:15:17 +02:00
if (!l_settings_get_uint(iwd_get_config(), "General",
"ManagementFrameProtection",
&mfp_setting))
mfp_setting = 1;
if (mfp_setting > 2) {
l_error("Invalid [General].ManagementFrameProtection value: %d,"
" using default of 1", mfp_setting);
mfp_setting = 1;
}
2021-01-22 14:37:01 +01:00
if (!l_settings_get_uint(iwd_get_config(), "General",
"RoamRetryInterval",
&roam_retry_interval))
roam_retry_interval = 60;
if (roam_retry_interval > INT_MAX)
roam_retry_interval = INT_MAX;
if (!l_settings_get_bool(iwd_get_config(), "General", "DisableANQP",
&anqp_disabled))
anqp_disabled = true;
if (!l_settings_get_bool(iwd_get_config(), "General",
"EnableNetworkConfiguration",
&netconfig_enabled))
netconfig_enabled = false;
if (!netconfig_enabled)
l_info("station: Network configuration is disabled.");
watchlist_init(&anqp_watches, NULL);
2020-04-17 19:20:53 +02:00
return 0;
2018-08-31 20:24:26 +02:00
}
2019-05-22 17:05:45 +02:00
static void station_exit(void)
2018-08-31 20:24:26 +02:00
{
l_dbus_unregister_interface(dbus_get_bus(),
IWD_STATION_DIAGNOSTIC_INTERFACE);
l_dbus_unregister_interface(dbus_get_bus(), IWD_STATION_INTERFACE);
netdev_watch_remove(netdev_watch);
2018-08-31 20:24:26 +02:00
l_queue_destroy(station_list, NULL);
station_list = NULL;
watchlist_destroy(&anqp_watches);
2018-08-31 20:24:26 +02:00
}
2019-05-22 17:05:45 +02:00
IWD_MODULE(station, station_init, station_exit)
IWD_MODULE_DEPENDS(station, netdev);
IWD_MODULE_DEPENDS(station, netconfig)