James Lu
6d6606900e
relay: coerse "/" to "|" in nicks if "/" isn't present in the separator
...
a.k.a. make J*anus* happy :)
2015-09-01 09:56:28 -07:00
James Lu
9f0f4cb124
relay: burst the right set of modes
...
It's moments like this where I wonder what I'm even doing with my life...
2015-08-31 09:28:14 -07:00
James Lu
51389b96e2
relay: LINKACL command ( Closes #88 )
2015-08-25 20:18:14 -07:00
James Lu
713ba1469b
relay: log blocked KILLs/KICKs ( Closes #95 )
2015-08-22 21:43:25 -07:00
James Lu
20474dabac
relay: fix many bugs with nick collision handling, and add flood prevention for fixing nicks
...
Closes #85 . Nick collisions caused by internal clients are handled fine now, including the following cases:
- Abusing spawnClient to create a user with the same nick as a relay client, but with a lower TS.
- When both an UID (e.g. 42XAAAAAA) and a tagged UID (_42XAAAAAA) exist on the same network (the two will both try to take the same nick of _42XAAAAAA/net over the relay).
The case where changing NICK from a long cut-off nick to another long cut-off nick is also mitigated. somelongnick/net won't show nick changes to somelongnic//net if the old and new nicks have give the same normalized relay nick.
This introduces a new dependency, expiringdict, from https://pypi.python.org/pypi/expiringdict/1.1.2 , which is used as a cache for flood prevention.
2015-08-22 21:01:51 -07:00
James Lu
c1d98838d7
plugins/admin: allow sending KICK from servers ( #90 )
2015-08-21 00:39:58 -07:00
James Lu
bd2bd55e89
relay: fix mode relaying when sender is a client but isn't in any shared channels
2015-08-20 22:13:28 -07:00
James Lu
dde9539e77
relay: fix incorrect logging in normalizeNick
2015-08-20 03:04:40 -07:00
James Lu
821f546f12
Make sure the PyLink client rejoins all relay channels on KILL
...
This adds a new internal hook, 'PYLINK_SPAWNMAIN', which is triggered whenever Irc().spawnMain() is called.
2015-08-18 05:44:36 -07:00
James Lu
f93349ae1f
relay: when restoring a user after KICK, join them to the *right* channel
2015-08-18 02:59:56 -07:00
James Lu
5704fddfb4
relay: ignore internal clients for CLAIM checks
2015-08-18 02:57:40 -07:00
James Lu
0d2fbc330d
relay: fix "Left all shared channels" quits for KICK handling
2015-08-18 02:44:27 -07:00
James Lu
d6e6e56e03
relay: hotfix to fix KILL handling of relay clients
2015-08-17 21:15:44 -07:00
James Lu
de36c7a62a
Merge branch 'wip/admin-commands-loopback' into devel
...
Conflicts:
plugins/relay.py
2015-08-17 07:52:45 -07:00
James Lu
e7f187c672
relay: send modes once at init, not on every JOIN
2015-08-15 23:31:54 -07:00
James Lu
3b83c3d567
relay: fix TOPIC relaying when the source and target channels have different names
2015-08-15 23:05:09 -07:00
James Lu
4352a68357
Check for TS changes on SJOIN (both incoming and outgoing)
...
Restore relay to the devel branch; TS bursts shouldn't be handled there, but in the protocol modules.
TODO: fix prefixmodes being cleared after BURST, and never being reset?
2015-08-15 19:53:09 -07:00
James Lu
0d41e35d9c
Merge branch 'devel' into wip/handle-ts-bursts
...
Conflicts:
plugins/relay.py
2015-08-15 19:28:49 -07:00
James Lu
aec29d2aae
relay: continue, not return
...
(fix SQUIT not rejoining relay users properly)
2015-08-15 19:23:41 -07:00
James Lu
043a4bc27a
Merge branch 'devel' into wip/admin-commands-loopback
...
Conflicts:
plugins/relay.py
2015-08-15 19:21:38 -07:00
James Lu
dd91b7e5a0
relay: more efficient getLocalUser
...
Set the .remote attribute of each relay client to the original netname, user pair.
2015-08-15 19:18:04 -07:00
James Lu
a1db4932e1
relay: Don't allow kicks/parts to the PyLink client to be relayed.
2015-08-15 06:05:12 -07:00
James Lu
6ebe6e7867
relay: check for whether clients are relay clients, instead of just internal clients
...
This prevents things like non-relay PyLink clients being quit for "Left all shared channels", and allows kicks between internal clients to relay properly.
2015-08-15 05:54:18 -07:00
James Lu
f63d17f945
relay: don't relay kicks if the target has no client on the remote network?
2015-08-15 05:54:05 -07:00
James Lu
cc7e52a190
relayJoins: remove check for whether the sender internal client
...
This is already done by the .remote attribute check.
2015-08-15 05:20:17 -07:00
James Lu
b2e1f9678f
plugins/admin: make command sending loop via hooks
...
This should allow plugins like relay to relay messages, kicks, etc. sent from these admin commands to actually work, preventing desyncs.
2015-08-15 05:12:49 -07:00
James Lu
d3ee7ed918
plugins/admin: fix command help for 'mode'
2015-08-15 05:12:20 -07:00
James Lu
f53e818438
plugins/admin: add 'msg' command ( #90 )
2015-08-15 04:51:32 -07:00
James Lu
5daf38d880
relay: restore ability to message @#channels across the relay ( #91 )
2015-08-15 00:12:30 -07:00
James Lu
4382b22138
relay: warn users when messaging channels they aren't in / remote users w/o sharing a channel
...
Some refactoring of relay's PRIVMSG handling is done here:
- Messages to channels the sender isn't in are dropped, with a notice warning sent.
- Messaging a remote user without sharing a channel with them raises an error, and is dropped.
Closes #91 .
2015-08-15 00:02:46 -07:00
James Lu
e5c7d438b1
relay: in handle_kick, only remove the target from the user cache after the kick has been relayed to all networks
2015-08-14 19:05:07 -07:00
James Lu
13b5377102
relay: Fix check for whether target user is on our target channel
...
Really closes #71 ; can I sleep now...
2015-08-14 19:02:51 -07:00
James Lu
65b8c9db8a
relay: attempt to fix race conditions in getRemoteUser calls ( #92 )
2015-08-14 08:52:09 -07:00
James Lu
27edc81894
relay: fix error message when DELINK is called on a relay's origin network without arguments
...
tl;dr I'm a terrible writer
2015-08-12 07:03:49 -07:00
James Lu
3ee10a5d1e
relay: also propagate AWAY status when spawning users
2015-08-12 04:40:49 -07:00
James Lu
486b56e255
relay: relay AWAY statuses
2015-08-12 04:18:20 -07:00
James Lu
b3c8929d17
relay: make logging less spammy
2015-08-12 01:20:32 -07:00
James Lu
14435f8f55
relay: run getLocalUser BEFORE quitting the user (in removeChannel)
...
This prevents KeyErrors from showing up on DELINK.
2015-08-12 01:19:30 -07:00
James Lu
cdb0bb6707
relay: fix some dumb typos
2015-08-07 17:57:37 -07:00
James Lu
d23d1c3987
relay: don't wait for irc.connected anymoree
...
Not needed, as nick length is a config value now.
2015-08-05 21:56:52 -07:00
James Lu
bf3116d704
First attempt at handling channel TS @ burst ( #93 )
...
Doesn't quite work yet, more testing needed.
2015-08-05 06:14:34 -07:00
James Lu
411b6c4702
relay: allow opers to run SAVE too
2015-08-05 06:10:55 -07:00
James Lu
4d55c8ce73
relay: announce KILL blocks once, and only once
2015-08-05 05:43:31 -07:00
James Lu
f61ecf6d68
relay: only call initializeAll on ENDBURST for the uplink
...
This prevents unnecessary bursts being sent every time a server is introduced on any network.
2015-08-04 05:13:44 -07:00
James Lu
3f98af6f96
relay: a few bugfixes
...
- Only send messages for blocked kicks if the sender is a user
- getRemoteUser: only set the .remote attribute when spawning a new user (prevents KeyErrors)
- Kick handling: Check for +y too when checking whether the kicker has ops
2015-08-03 23:22:13 -07:00
James Lu
f786242730
Support loading different config files from the command line
...
Closes #84 . Logs, PID files, and relay DBs will name themselves differently for every instance, to prevent conflicts. The default is always config.yml.
2015-08-03 19:27:19 -07:00
James Lu
55a4fcd8be
Merge branch 'devel' of github.com:GLolol/PyLink into devel
2015-08-03 04:42:09 -07:00
James Lu
58e84a654c
relay: prevent RuntimeError on handle_quit
2015-08-02 19:46:19 -07:00
James Lu
880b59c2c1
utils.isOper: check for both umode +o and login status
...
Also, make commands.status show this isOper result.
2015-08-02 19:41:40 -07:00
James Lu
3646930d34
relay: disable "you must in a share channel" messages; they're buggy
2015-07-29 04:02:45 -07:00
