3114 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
James Lu	d01b9aaa23	relay: improve fallback KNOCK notices ... - Show the network that the /knock originated from (it is *not* obvious when we have a user with no relay client) - Specifically hint that users with no relay client cannot be invited directly because there is no client to actually /invite! - Prefer sending the notice to %#channel when halfops are available, as they usually have the power to /invite	2017-12-21 01:57:43 -08:00
James Lu	f64976b1ed	p10: implement outgoing knock() as a wrapper over NOTICE	2017-12-21 01:53:41 -08:00
James Lu	2df608307d	relay: block sending STATUSMSG messages to IRCds not supporting them	2017-12-21 01:41:01 -08:00
James Lu	16b491fdab	ts6_common, p10: declare protocol cap has-statusmsg	2017-12-21 01:34:41 -08:00
James Lu	d81a9cd5c3	relay: differentiate between PRIVMSG vs. NOTICE via a blacklist ... This is so that P10 WALL* commands are forwarded correctly as notices instead of privmsgs.	2017-12-21 01:27:34 -08:00
James Lu	20e730ba2b	p10: add inbound handlers for WALLCHOPS/WALLHOPS/WALLVOICES ... This essentially finishes off STATUSMSG support on P10.	2017-12-21 01:27:19 -08:00
James Lu	2cc1195ff9	p10: refactor message() to send @%+#channel messages correctly	2017-12-21 01:20:08 -08:00
James Lu	63f3cdaea8	relay: add knock forwarding support	2017-12-21 00:19:09 -08:00
James Lu	454539185e	Move knock handling to ts6_common ... This adds support for (reasonless) KNOCK on TS6.	2017-12-21 00:04:55 -08:00
James Lu	2245af1dba	Revert "ts6: handle ChatIRCd ENCAP USERMODE" ... This reverts commit 785fc8d2d2. This feature isn't actually used yet and is relatively non-standard. Aside from that, the biggest issue so far is that ENCAP USERMODE doesn't give servers a way to explicitly acknowledge or reject(ignore) the mode change, which can lead to desyncs.	2017-12-18 17:20:37 -08:00
James Lu	ab91acb2f7	relay_clientbot: rename isRelayClient => is_relay_client()	2017-12-18 13:23:53 -08:00
James Lu	954f4f9886	relay: capitalize constants related to modes	2017-12-18 13:23:16 -08:00
James Lu	0104462782	relay: whitelist cmodes kicknorejoin, kicknorejoin_insp, repeat, repeat_insp ... Closes #559.	2017-12-18 13:17:05 -08:00
James Lu	ec3b230eab	inspircd: move definitions for cmodes +J and +E to kicknorejoin_insp and repeat_insp ... These use InspIRCd specific arguments which don't map cleanly to other IRCds. #559	2017-12-18 13:10:48 -08:00
James Lu	6c65d5523e	IRCNetwork: potentially fix queue thread shutdowns (#558) ... Replace unreliable appendleft() usage with replacing the first element (or adding None if the queue is empty).	2017-12-17 01:01:21 -08:00
James Lu	9a5072824d	relay: stop lowercasing modedelta args, as that can break things like unreal +f	2017-12-14 13:40:47 -08:00
James Lu	f908e407d4	relay: also ignore clientbot networks in modedelta ... TODO: abstract all these checks out!	2017-12-14 13:26:43 -08:00
James Lu	923795719f	relay: drop all list and prefix modes in modedelta	2017-12-14 13:07:00 -08:00
James Lu	57a2132d5d	relay: always enforce modedelta modes, and prevent them from being unset	2017-12-14 12:46:25 -08:00
James Lu	b2270ca3eb	relay: move claim enforcement routines outside the mode/kick loops ... This prevents claim responses from being sent multiple times.	2017-12-14 12:15:19 -08:00
James Lu	59c12ff354	relay: merge in modedelta branch, port to latest 2.x relay ... Merge remote-tracking branch 'origin/wip/relay-modedelta' into devel Conflicts: plugins/relay.py	2017-12-14 11:56:41 -08:00
James Lu	8490bee634	handlers: pick the highest prefix when displaying status in WHOIS ... This fixes a regression from aa44bc15a3	2017-12-12 12:46:43 -08:00
James Lu	9dfa0a478e	classes: fix inverted order in get_prefix_modes() description ... No, no, no. Nobody sorts modes that way!	2017-12-07 12:07:08 -08:00
James Lu	d54bf0d06c	relay: also log the extban prefix strings being readded	2017-12-07 11:38:27 -08:00
James Lu	a2cb4daa46	relay: mangle the mode name when forwarding extban->cmode so that +b syntax filters don't trigger ... This should allow bidirectional forwarding between UnrealIRCd +b ~T:block:<glob> and InspIRCd +g <glob> to work. (#557)	2017-12-07 11:26:16 -08:00
James Lu	8fcb5f9df0	relay: ignore static extbans when looking up dynamic extban prefixes ... This fixes #560, which was caused by relay confusing ban_all_registered ($a) with ban_account ($a:), since $a:account also starts with $a.	2017-12-07 11:05:39 -08:00
James Lu	6adeada598	relay: add more complete debug logging in extban handlers	2017-12-07 11:04:26 -08:00
James Lu	a0c57d0a5a	unreal: register ~T extbans as filter and filter_censor (#557) ... This doesn't work in relay yet because of #560 (as well as a restriction where acting extbans must match n!u@h...)	2017-12-07 00:36:38 -08:00
James Lu	bd2cd90957	modelists/channel-modes: add inspircd +D definition ... [skip ci]	2017-12-05 12:04:35 -08:00
James Lu	d30eca77e9	relay: add more channel modes to the whitelist ... * blockcaps: inspircd +B, elemental-ircd +G * exemptchanops: inspircd +X * filter: inspircd +g * hidequits: nefarious +Q, snircd +u * history: inspircd +H * largebanlist: ts6 +L * noamsg: snircd/nefarious +T	2017-12-05 12:01:57 -08:00
James Lu	80ef2ca788	hybrid: remove slash-in-hosts as it is not supported	2017-12-03 18:56:43 -08:00
James Lu	2fc5d32e3f	NetworkCore: don't clear state on disconnect ... This is already reset on connect, so doing it here too is a bit pointless.	2017-12-03 18:56:39 -08:00
James Lu	bebdf2e4ff	IRCNetwork: avoid sending multiple disconnect hooks for one disconnection	2017-12-03 17:46:45 -08:00
James Lu	8b62d6d458	modelists: resort data by ircd names defined in protocol modules	2017-11-21 07:39:45 -08:00
James Lu	52f40ad7a2	networks.remote: don't clobber command switches for other commands ... This also moves the --service argument to before the network name to prevent ambiguity with argparse.REMAINDER. Closes #538.	2017-11-14 18:14:23 -08:00
James Lu	f969197436	Convert protocol-modules graphic to a .svg	2017-11-12 12:07:08 -08:00
James Lu	bff53c6e69	Remove .codeclimate.yml, practically unused ... This reverts commit 3869c06991.	2017-11-12 12:03:25 -08:00
James Lu	03e02dda51	relay: replace garbage locking code with proper filtering in relay_joins ... I'm not even going to start on how much time I spent working on this... Closes #548, #529	2017-11-12 11:58:36 -08:00
James Lu	d4cbf1d2af	services_support: fix rejoin-on-kill to the main service bot ... Clear the irc.pseudoclient state on kill as the respawning code will check for it first and reuse UIDs even if they don't exist.	2017-11-12 10:54:30 -08:00
James Lu	847854aac3	Merge branch 'master' into devel ... Conflicts: README.md	2017-11-07 19:19:52 -08:00
James Lu	48ea58c1fb	bots: remove use of deprecated utils.isNick()	2017-11-07 19:19:11 -08:00
James Lu	c35c8cd4aa	FAQ updates [skip ci] ... - add answers for "services bots not spawning" and "inconsistent config spacing causing errors" - reword the connection troubleshooting section slightly - mention using 'showchan' to help determine the cause of missing user issues	2017-11-07 09:59:37 -08:00
James Lu	15a231a371	global: ignore empty "global:" configuration blocks	2017-11-06 12:07:33 -08:00
James Lu	b6af6dddc5	relay: fix RuntimeError on handle_part for clientbot networks	2017-11-05 01:18:42 -08:00
James Lu	509c2e52c4	clientbot: fix KeyError when there are still queued outgoing messages to a channel we just left	2017-11-05 01:17:59 -08:00
James Lu	62cef5c3f5	classes: clarify comments on mode-related functions	2017-11-03 23:40:11 -07:00
James Lu	b366aa8d61	Merge branch 'wip/ts6-updates' into devel	2017-10-27 06:50:37 -07:00
James Lu	544e078512	clientbot: treat 0 as an empty account name (for WHOX) ... This fixes incorrect "X is logged in (on somenet) as 0" messages in WHOIS.	2017-10-25 16:01:10 -07:00
James Lu	c974ee9b44	hybrid: various cleanup	2017-10-22 01:19:38 -07:00
James Lu	c636e064e7	ts6: remove SAVE from required capabs ... We don't actually send SAVE out to any IRCd, so we don't need to demand that it's supported. Closes #545.	2017-10-22 01:08:30 -07:00