diff --git a/.lock b/.lock
new file mode 100644
index 0000000..e69de29
diff --git a/_service b/_service
index cce4794..113c0f1 100644
--- a/_service
+++ b/_service
@@ -1,5 +1,16 @@
-
+
+ https://github.com/ergochat/ergo
+ git
+ @PARENT_TAG@+@TAG_OFFSET@
+ enable
+
+
+ *.tar
+ gz
+
+
+
diff --git a/_servicedata b/_servicedata
new file mode 100644
index 0000000..5778976
--- /dev/null
+++ b/_servicedata
@@ -0,0 +1,4 @@
+
+
+ https://github.com/ergochat/ergo
+ 99a48496fa95ea2765850b1a308b171827e6eb81
\ No newline at end of file
diff --git a/default.yaml b/default.yaml
new file mode 100644
index 0000000..e493f92
--- /dev/null
+++ b/default.yaml
@@ -0,0 +1,980 @@
+#####
+#
+# This is the default config file for the Ergo RPM packge.
+# It contains the same default settings as the default.yaml file shipped with Ergo,
+# except for disabled additional languages, but comes with adjusted paths to ensure a smooth installation.
+# Packaging date of this config: 04/06/2021 with package version: ergo-2.7.0_x86_64
+# NOTE: An existing /etc/ergo/ircd.yaml file will NOT be touched if you decide to reinstall or upgrade Ergo using the RPM package.
+# If new config options are implemented, you either have to add them manually after the upgrade, or delete/move this file before the upgrade.
+#
+#####
+# This is the default config file for Ergo.
+# It contains recommended defaults for all settings, including some behaviors
+# that differ from conventional ircd+services setups. See traditional.yaml
+# for a config with more "mainstream" behavior.
+#
+# If you are setting up a new Ergo server, you should copy this file
+# to a new one named 'ircd.yaml', then read the whole file to see which
+# settings you want to customize. If you don't understand a setting, or
+# aren't sure what behavior you want, most of the defaults are fine
+# to start with (you can change them later, even on a running server).
+# However, there are a few that you should probably change up front:
+# 1. network.name (a human-readable name that identifies your network,
+# no spaces or special characters) and server.name (consider using the
+# domain name of your server)
+# 2. if you have valid TLS certificates (for example, from letsencrypt.org),
+# you should enable them in server.listeners in place of the default
+# self-signed certificates
+# 3. the operator password in the 'opers' section
+# 4. by default, message history is enabled, using in-memory history storage
+# and with messages expiring after 7 days. depending on your needs, you may
+# want to disable history entirely, remove the expiration time, switch to
+# persistent history stored in MySQL, or do something else entirely. See
+# the 'history' section of the config.
+
+# network configuration
+network:
+ # name of the network
+ name: ErgoTestRPM
+
+# server configuration
+server:
+ # server name
+ name: ergo.test
+
+ # addresses to listen on
+ listeners:
+ # The standard plaintext port for IRC is 6667. Allowing plaintext over the
+ # public Internet poses serious security and privacy issues. Accordingly,
+ # we recommend using plaintext only on local (loopback) interfaces:
+ "127.0.0.1:6667": # (loopback ipv4, localhost-only)
+ "[::1]:6667": # (loopback ipv6, localhost-only)
+ # If you need to serve plaintext on public interfaces, comment out the above
+ # two lines and uncomment the line below (which listens on all interfaces):
+ # ":6667":
+ # Alternately, if you have a TLS certificate issued by a recognized CA,
+ # you can configure port 6667 as an STS-only listener that only serves
+ # "redirects" to the TLS port, but doesn't allow chat. See the manual
+ # for details.
+
+ # The standard SSL/TLS port for IRC is 6697. This will listen on all interfaces:
+ ":6697":
+ # this is a standard TLS configuration with a single certificate;
+ # see the manual for instructions on how to configure SNI
+ tls:
+ cert: /etc/ergo/.sec/fullchain.pem
+ key: /etc/ergo/.sec/privkey.pem
+ # 'proxy' should typically be false. It's for cloud load balancers that
+ # always send a PROXY protocol header ahead of the connection. See the
+ # manual ("Reverse proxies") for more details.
+ proxy: false
+ # set the minimum TLS version:
+ min-tls-version: 1.2
+
+ # Example of a Unix domain socket for proxying:
+ # "/tmp/ergo_sock":
+
+ # Example of a Tor listener: any connection that comes in on this listener will
+ # be considered a Tor connection. It is strongly recommended that this listener
+ # *not* be on a public interface --- it should be on 127.0.0.0/8 or unix domain:
+ # "/hidden_service_sockets/ergo_tor_sock":
+ # tor: true
+
+ # Example of a WebSocket listener:
+ # ":8097":
+ # websocket: true
+ # tls:
+ # cert: fullchain.pem
+ # key: privkey.pem
+
+ # sets the permissions for Unix listen sockets. on a typical Linux system,
+ # the default is 0775 or 0755, which prevents other users/groups from connecting
+ # to the socket. With 0777, it behaves like a normal TCP socket
+ # where anyone can connect.
+ unix-bind-mode: 0777
+
+ # configure the behavior of Tor listeners (ignored if you didn't enable any):
+ tor-listeners:
+ # if this is true, connections from Tor must authenticate with SASL
+ require-sasl: false
+
+ # what hostname should be displayed for Tor connections?
+ vhost: "tor-network.onion"
+
+ # allow at most this many connections at once (0 for no limit):
+ max-connections: 64
+
+ # connection throttling (limit how many connection attempts are allowed at once):
+ throttle-duration: 10m
+ # set to 0 to disable throttling:
+ max-connections-per-duration: 64
+
+ # strict transport security, to get clients to automagically use TLS
+ sts:
+ # whether to advertise STS
+ #
+ # to stop advertising STS, leave this enabled and set 'duration' below to "0". this will
+ # advertise to connecting users that the STS policy they have saved is no longer valid
+ enabled: false
+
+ # how long clients should be forced to use TLS for.
+ # setting this to a too-long time will mean bad things if you later remove your TLS.
+ # the default duration below is 1 month, 2 days and 5 minutes.
+ duration: 1mo2d5m
+
+ # tls port - you should be listening on this port above
+ port: 6697
+
+ # should clients include this STS policy when they ship their inbuilt preload lists?
+ preload: false
+
+ websockets:
+ # Restrict the origin of WebSocket connections by matching the "Origin" HTTP
+ # header. This setting causes ergo to reject websocket connections unless
+ # they originate from a page on one of the whitelisted websites in this list.
+ # This prevents malicious websites from making their visitors connect to your
+ # ergo instance without their knowledge. An empty list means there are no
+ # restrictions.
+ allowed-origins:
+ # - "https://ergo.chat"
+ # - "https://*.ergo.chat"
+
+ # casemapping controls what kinds of strings are permitted as identifiers (nicknames,
+ # channel names, account names, etc.), and how they are normalized for case.
+ # with the recommended default of 'precis', UTF8 identifiers that are "sane"
+ # (according to RFC 8265) are allowed, and the server additionally tries to protect
+ # against confusable characters ("homoglyph attacks").
+ # the other options are 'ascii' (traditional ASCII-only identifiers), and 'permissive',
+ # which allows identifiers to contain unusual characters like emoji, but makes users
+ # vulnerable to homoglyph attacks. unless you're really confident in your decision,
+ # we recommend leaving this value at its default (changing it once the network is
+ # already up and running is problematic).
+ casemapping: "precis"
+
+ # enforce-utf8 controls whether the server will preemptively discard non-UTF8
+ # messages (since they cannot be relayed to websocket clients), or will allow
+ # them and relay them to non-websocket clients (as in traditional IRC).
+ enforce-utf8: true
+
+ # whether to look up user hostnames with reverse DNS. there are 3 possibilities:
+ # 1. lookup-hostnames enabled, IP cloaking disabled; users will see each other's hostnames
+ # 2. lookup-hostnames disabled, IP cloaking disabled; users will see each other's numeric IPs
+ # 3. [the default] IP cloaking enabled; users will see cloaked hostnames
+ lookup-hostnames: false
+ # whether to confirm hostname lookups using "forward-confirmed reverse DNS", i.e., for
+ # any hostname returned from reverse DNS, resolve it back to an IP address and reject it
+ # unless it matches the connecting IP
+ forward-confirm-hostnames: true
+
+ # use ident protocol to get usernames
+ check-ident: false
+
+ # ignore the supplied user/ident string from the USER command, always setting user/ident
+ # to the following literal value; this can potentially reduce confusion and simplify bans.
+ # the value must begin with a '~' character. comment out / omit to disable:
+ coerce-ident: '~u'
+
+ # password to login to the server, generated using `ergo genpasswd`:
+ #password: "$2a$04$0123456789abcdef0123456789abcdef0123456789abcdef01234"
+
+ # motd filename
+ # if you change the motd, you should move it to ircd.motd
+ motd: ergo.motd
+
+ # motd formatting codes
+ # if this is true, the motd is escaped using formatting codes like $c, $b, and $i
+ motd-formatting: true
+
+ # relaying using the RELAYMSG command
+ relaymsg:
+ # is relaymsg enabled at all?
+ enabled: true
+
+ # which character(s) are reserved for relayed nicks?
+ separators: "/"
+
+ # can channel operators use RELAYMSG in their channels?
+ # our implementation of RELAYMSG makes it safe for chanops to use without the
+ # possibility of real users being silently spoofed
+ available-to-chanops: true
+
+ # IPs/CIDRs the PROXY command can be used from
+ # This should be restricted to localhost (127.0.0.1/8, ::1/128, and unix sockets).
+ # Unless you have a good reason. you should also add these addresses to the
+ # connection limits and throttling exemption lists.
+ proxy-allowed-from:
+ - localhost
+ # - "192.168.1.1"
+ # - "192.168.10.1/24"
+
+ # controls the use of the WEBIRC command (by IRC<->web interfaces, bouncers and similar)
+ webirc:
+ # one webirc block -- should correspond to one set of gateways
+ -
+ # SHA-256 fingerprint of the TLS certificate the gateway must use to connect
+ # (comment this out to use passwords only)
+ certfp: "abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789"
+
+ # password the gateway uses to connect, made with `ergo genpasswd`
+ password: "$2a$04$abcdef0123456789abcdef0123456789abcdef0123456789abcde"
+
+ # IPs/CIDRs that can use this webirc command
+ # you should also add these addresses to the connection limits and throttling exemption lists
+ hosts:
+ - localhost
+ # - "192.168.1.1"
+ # - "192.168.10.1/24"
+
+ # allow use of the RESUME extension over plaintext connections:
+ # do not enable this unless the ircd is only accessible over internal networks
+ allow-plaintext-resume: false
+
+ # maximum length of clients' sendQ in bytes
+ # this should be big enough to hold bursts of channel/direct messages
+ max-sendq: 96k
+
+ # compatibility with legacy clients
+ compatibility:
+ # many clients require that the final parameter of certain messages be an
+ # RFC1459 trailing parameter, i.e., prefixed with :, whether or not this is
+ # actually required. this forces Ergo to send those parameters
+ # as trailings. this is recommended unless you're testing clients for conformance;
+ # defaults to true when unset for that reason.
+ force-trailing: true
+
+ # some clients (ZNC 1.6.x and lower, Pidgin 2.12 and lower) do not
+ # respond correctly to SASL messages with the server name as a prefix:
+ # https://github.com/znc/znc/issues/1212
+ # this works around that bug, allowing them to use SASL.
+ send-unprefixed-sasl: true
+
+ # traditionally, IRC servers will truncate and send messages that are
+ # too long to be relayed intact. this behavior can be disabled by setting
+ # allow-truncation to false, in which case Ergo will reject the message
+ # and return an error to the client. (note that this option defaults to true
+ # when unset.)
+ allow-truncation: false
+
+ # IP-based DoS protection
+ ip-limits:
+ # whether to limit the total number of concurrent connections per IP/CIDR
+ count: true
+ # maximum concurrent connections per IP/CIDR
+ max-concurrent-connections: 16
+
+ # whether to restrict the rate of new connections per IP/CIDR
+ throttle: true
+ # how long to keep track of connections for
+ window: 10m
+ # maximum number of new connections per IP/CIDR within the given duration
+ max-connections-per-window: 32
+
+ # how wide the CIDR should be for IPv4 (a /32 is a fully specified IPv4 address)
+ cidr-len-ipv4: 32
+ # how wide the CIDR should be for IPv6 (a /64 is the typical prefix assigned
+ # by an ISP to an individual customer for their LAN)
+ cidr-len-ipv6: 64
+
+ # IPs/networks which are exempted from connection limits
+ exempted:
+ - "localhost"
+ # - "192.168.1.1"
+ # - "2001:0db8::/32"
+
+ # custom connection limits for certain IPs/networks.
+ custom-limits:
+ #"irccloud":
+ # nets:
+ # - "192.184.9.108" # highgate.irccloud.com
+ # - "192.184.9.110" # ealing.irccloud.com
+ # - "192.184.9.112" # charlton.irccloud.com
+ # - "192.184.10.118" # brockwell.irccloud.com
+ # - "192.184.10.9" # tooting.irccloud.com
+ # - "192.184.8.73" # hathersage.irccloud.com
+ # - "192.184.8.103" # stonehaven.irccloud.com
+ # - "5.254.36.57" # tinside.irccloud.com
+ # - "5.254.36.56/29" # additional ipv4 net
+ # - "2001:67c:2f08::/48"
+ # - "2a03:5180:f::/64"
+ # max-concurrent-connections: 2048
+ # max-connections-per-window: 2048
+
+ # pluggable IP ban mechanism, via subprocess invocation
+ # this can be used to check new connections against a DNSBL, for example
+ # see the manual for details on how to write an IP ban checking script
+ ip-check-script:
+ enabled: false
+ command: "/usr/local/bin/check-ip-ban"
+ # constant list of args to pass to the command; the actual query
+ # and result are transmitted over stdin/stdout:
+ args: []
+ # timeout for process execution, after which we send a SIGTERM:
+ timeout: 9s
+ # how long after the SIGTERM before we follow up with a SIGKILL:
+ kill-timeout: 1s
+ # how many scripts are allowed to run at once? 0 for no limit:
+ max-concurrency: 64
+
+ # IP cloaking hides users' IP addresses from other users and from channel admins
+ # (but not from server admins), while still allowing channel admins to ban
+ # offending IP addresses or networks. In place of hostnames derived from reverse
+ # DNS, users see fake domain names like pwbs2ui4377257x8.irc. These names are
+ # generated deterministically from the underlying IP address, but if the underlying
+ # IP is not already known, it is infeasible to recover it from the cloaked name.
+ # If you disable this, you should probably enable lookup-hostnames in its place.
+ ip-cloaking:
+ # whether to enable IP cloaking
+ enabled: true
+
+ # whether to use these cloak settings (specifically, `netname` and `num-bits`)
+ # to produce unique hostnames for always-on clients. you can enable this even if
+ # you disabled IP cloaking for normal clients above. if this is disabled,
+ # always-on clients will all have an identical hostname (the server name).
+ enabled-for-always-on: true
+
+ # fake TLD at the end of the hostname, e.g., pwbs2ui4377257x8.irc
+ # you may want to use your network name here
+ netname: "irc"
+
+ # the cloaked hostname is derived only from the CIDR (most significant bits
+ # of the IP address), up to a configurable number of bits. this is the
+ # granularity at which bans will take effect for IPv4. Note that changing
+ # this value will invalidate any stored bans.
+ cidr-len-ipv4: 32
+
+ # analogous granularity for IPv6
+ cidr-len-ipv6: 64
+
+ # number of bits of hash output to include in the cloaked hostname.
+ # more bits means less likelihood of distinct IPs colliding,
+ # at the cost of a longer cloaked hostname. if this value is set to 0,
+ # all users will receive simply `netname` as their cloaked hostname.
+ num-bits: 64
+
+ # secure-nets identifies IPs and CIDRs which are secure at layer 3,
+ # for example, because they are on a trusted internal LAN or a VPN.
+ # plaintext connections from these IPs and CIDRs will be considered
+ # secure (clients will receive the +Z mode and be allowed to resume
+ # or reattach to secure connections). note that loopback IPs are always
+ # considered secure:
+ secure-nets:
+ # - "10.0.0.0/8"
+
+ # Ergo will write files to disk under certain circumstances, e.g.,
+ # CPU profiling or data export. by default, these files will be written
+ # to the working directory. set this to customize:
+ #output-path: "/home/ergo/out"
+
+ # the hostname used by "services", e.g., NickServ, defaults to "localhost",
+ # e.g., `NickServ!NickServ@localhost`. uncomment this to override:
+ #override-services-hostname: "example.network"
+
+ # in a "closed-loop" system where you control the server and all the clients,
+ # you may want to increase the maximum (non-tag) length of an IRC line from
+ # the default value of 512. DO NOT change this on a public server:
+ # max-line-len: 512
+
+# account options
+accounts:
+ # is account authentication enabled, i.e., can users log into existing accounts?
+ authentication-enabled: true
+
+ # account registration
+ registration:
+ # can users register new accounts for themselves? if this is false, operators with
+ # the `accreg` capability can still create accounts with `/NICKSERV SAREGISTER`
+ enabled: true
+
+ # can users use the REGISTER command to register before fully connecting?
+ allow-before-connect: true
+
+ # global throttle on new account creation
+ throttling:
+ enabled: true
+ # window
+ duration: 10m
+ # number of attempts allowed within the window
+ max-attempts: 30
+
+ # this is the bcrypt cost we'll use for account passwords
+ # (note that 4 is the lowest value allowed by the bcrypt library)
+ bcrypt-cost: 4
+
+ # length of time a user has to verify their account before it can be re-registered
+ verify-timeout: "32h"
+
+ # options for email verification of account registrations
+ email-verification:
+ enabled: false
+ sender: "admin@my.network"
+ require-tls: true
+ helo-domain: "my.network" # defaults to server name if unset
+ # options to enable DKIM signing of outgoing emails (recommended, but
+ # requires creating a DNS entry for the public key):
+ # dkim:
+ # domain: "my.network"
+ # selector: "20200229"
+ # key-file: "dkim.pem"
+ # to use an MTA/smarthost instead of sending email directly:
+ # mta:
+ # server: localhost
+ # port: 25
+ # username: "admin"
+ # password: "hunter2"
+ blacklist-regexes:
+ # - ".*@mailinator.com"
+
+ # throttle account login attempts (to prevent either password guessing, or DoS
+ # attacks on the server aimed at forcing repeated expensive bcrypt computations)
+ login-throttling:
+ enabled: true
+
+ # window
+ duration: 1m
+
+ # number of attempts allowed within the window
+ max-attempts: 3
+
+ # some clients (notably Pidgin and Hexchat) offer only a single password field,
+ # which makes it impossible to specify a separate server password (for the PASS
+ # command) and SASL password. if this option is set to true, a client that
+ # successfully authenticates with SASL will not be required to send
+ # PASS as well, so it can be configured to authenticate with SASL only.
+ skip-server-password: false
+
+ # enable login to accounts via the PASS command, e.g., PASS account:password
+ # this is useful for compatibility with old clients that don't support SASL
+ login-via-pass-command: true
+
+ # require-sasl controls whether clients are required to have accounts
+ # (and sign into them using SASL) to connect to the server
+ require-sasl:
+ # if this is enabled, all clients must authenticate with SASL while connecting.
+ # WARNING: for a private server, you MUST set accounts.registration.enabled
+ # to false as well, in order to prevent non-administrators from registering
+ # accounts.
+ enabled: false
+
+ # IPs/CIDRs which are exempted from the account requirement
+ exempted:
+ - "localhost"
+ # - '10.10.0.0/16'
+
+ # nick-reservation controls how, and whether, nicknames are linked to accounts
+ nick-reservation:
+ # is there any enforcement of reserved nicknames?
+ enabled: true
+
+ # how many nicknames, in addition to the account name, can be reserved?
+ # (note that additional nicks are unusable under force-nick-equals-account
+ # or if the client is always-on)
+ additional-nick-limit: 0
+
+ # method describes how nickname reservation is handled
+ # strict: users must already be logged in to their account (via
+ # SASL, PASS account:password, or /NickServ IDENTIFY)
+ # in order to use their reserved nickname(s)
+ # optional: no enforcement by default, but allow users to opt in to
+ # the enforcement level of their choice
+ method: strict
+
+ # allow users to set their own nickname enforcement status, e.g.,
+ # to opt out of strict enforcement
+ allow-custom-enforcement: false
+
+ # format for guest nicknames:
+ # 1. these nicknames cannot be registered or reserved
+ # 2. if a client is automatically renamed by the server,
+ # this is the template that will be used (e.g., Guest-nccj6rgmt97cg)
+ # 3. if enforce-guest-format (see below) is enabled, clients without
+ # a registered account will have this template applied to their
+ # nicknames (e.g., 'katie' will become 'Guest-katie')
+ guest-nickname-format: "Guest-*"
+
+ # when enabled, forces users not logged into an account to use
+ # a nickname matching the guest template. a caveat: this may prevent
+ # users from choosing nicknames in scripts different from the guest
+ # nickname format.
+ force-guest-format: false
+
+ # when enabled, forces users logged into an account to use the
+ # account name as their nickname. when combined with strict nickname
+ # enforcement, this lets users treat nicknames and account names
+ # as equivalent for the purpose of ban/invite/exception lists.
+ force-nick-equals-account: true
+
+ # parallel setting to force-nick-equals-account: if true, this forbids
+ # anonymous users (i.e., users not logged into an account) to change their
+ # nickname after the initial connection is complete
+ forbid-anonymous-nick-changes: false
+
+ # multiclient controls whether Ergo allows multiple connections to
+ # attach to the same client/nickname identity; this is part of the
+ # functionality traditionally provided by a bouncer like ZNC
+ multiclient:
+ # when disabled, each connection must use a separate nickname (as is the
+ # typical behavior of IRC servers). when enabled, a new connection that
+ # has authenticated with SASL can associate itself with an existing
+ # client
+ enabled: true
+
+ # if this is disabled, clients have to opt in to bouncer functionality
+ # using nickserv or the cap system. if it's enabled, they can opt out
+ # via nickserv
+ allowed-by-default: true
+
+ # whether to allow clients that remain on the server even
+ # when they have no active connections. The possible values are:
+ # "disabled", "opt-in", "opt-out", or "mandatory".
+ always-on: "opt-in"
+
+ # whether to mark always-on clients away when they have no active connections:
+ auto-away: "opt-in"
+
+ # QUIT always-on clients from the server if they go this long without connecting
+ # (use 0 or omit for no expiration):
+ #always-on-expiration: 90d
+
+ # vhosts controls the assignment of vhosts (strings displayed in place of the user's
+ # hostname/IP) by the HostServ service
+ vhosts:
+ # are vhosts enabled at all?
+ enabled: true
+
+ # maximum length of a vhost
+ max-length: 64
+
+ # regexp for testing the validity of a vhost
+ # (make sure any changes you make here are RFC-compliant)
+ valid-regexp: '^[0-9A-Za-z.\-_/]+$'
+
+ # modes that are set by default when a user connects
+ # if unset, no user modes will be set by default
+ # +i is invisible (a user's channels are hidden from whois replies)
+ # see /QUOTE HELP umodes for more user modes
+ default-user-modes: +i
+
+ # pluggable authentication mechanism, via subprocess invocation
+ # see the manual for details on how to write an authentication plugin script
+ auth-script:
+ enabled: false
+ command: "/usr/local/bin/authenticate-irc-user"
+ # constant list of args to pass to the command; the actual authentication
+ # data is transmitted over stdin/stdout:
+ args: []
+ # should we automatically create users if the plugin returns success?
+ autocreate: true
+ # timeout for process execution, after which we send a SIGTERM:
+ timeout: 9s
+ # how long after the SIGTERM before we follow up with a SIGKILL:
+ kill-timeout: 1s
+ # how many scripts are allowed to run at once? 0 for no limit:
+ max-concurrency: 64
+
+# channel options
+channels:
+ # modes that are set when new channels are created
+ # +n is no-external-messages and +t is op-only-topic
+ # see /QUOTE HELP cmodes for more channel modes
+ default-modes: +nt
+
+ # how many channels can a client be in at once?
+ max-channels-per-client: 100
+
+ # if this is true, new channels can only be created by operators with the
+ # `chanreg` operator capability
+ operator-only-creation: false
+
+ # channel registration - requires an account
+ registration:
+ # can users register new channels?
+ enabled: true
+
+ # restrict new channel registrations to operators only?
+ # (operators can then transfer channels to regular users using /CS TRANSFER)
+ operator-only: false
+
+ # how many channels can each account register?
+ max-channels-per-account: 15
+
+ # as a crude countermeasure against spambots, anonymous connections younger
+ # than this value will get an empty response to /LIST (a time period of 0 disables)
+ list-delay: 0s
+
+ # INVITE to an invite-only channel expires after this amount of time
+ # (0 or omit for no expiration):
+ invite-expiration: 24h
+
+# operator classes
+oper-classes:
+ # chat moderator: can ban/unban users from the server, join channels,
+ # fix mode issues and sort out vhosts.
+ "chat-moderator":
+ # title shown in WHOIS
+ title: Chat Moderator
+
+ # capability names
+ capabilities:
+ - "kill"
+ - "ban"
+ - "nofakelag"
+ - "roleplay"
+ - "relaymsg"
+ - "vhosts"
+ - "sajoin"
+ - "samode"
+ - "snomasks"
+
+ # server admin: has full control of the ircd, including nickname and
+ # channel registrations
+ "server-admin":
+ # title shown in WHOIS
+ title: Server Admin
+
+ # oper class this extends from
+ extends: "chat-moderator"
+
+ # capability names
+ capabilities:
+ - "rehash"
+ - "accreg"
+ - "chanreg"
+ - "history"
+ - "defcon"
+ - "massmessage"
+
+# ircd operators
+opers:
+ # default operator named 'admin'; log in with /OPER admin
+ admin:
+ # which capabilities this oper has access to
+ class: "server-admin"
+
+ # custom whois line
+ whois-line: is the server administrator
+
+ # custom hostname
+ vhost: "staff"
+
+ # normally, operator status is visible to unprivileged users in WHO and WHOIS
+ # responses. this can be disabled with 'hidden'. ('hidden' also causes the
+ # 'vhost' line above to be ignored.)
+ hidden: false
+
+ # modes are modes to auto-set upon opering-up. uncomment this to automatically
+ # enable snomasks ("server notification masks" that alert you to server events;
+ # see `/quote help snomasks` while opered-up for more information):
+ #modes: +is acjknoqtuxv
+
+ # operators can be authenticated either by password (with the /OPER command),
+ # or by certificate fingerprint, or both. if a password hash is set, then a
+ # password is required to oper up (e.g., /OPER dan mypassword). to generate
+ # the hash, use `ergo genpasswd`.
+ password: "$2a$04$0123456789abcdef0123456789abcdef0123456789abcdef01234"
+
+ # if a SHA-256 certificate fingerprint is configured here, then it will be
+ # required to /OPER. if you comment out the password hash above, then you can
+ # /OPER without a password.
+ #certfp: "abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789"
+ # if 'auto' is set (and no password hash is set), operator permissions will be
+ # granted automatically as soon as you connect with the right fingerprint.
+ #auto: true
+
+ # example of a moderator named 'alice'
+ # (log in with /OPER alice ):
+ #alice:
+ # class: "chat-moderator"
+ # whois-line: "can help with moderation issues!"
+ # password: "$2a$04$0123456789abcdef0123456789abcdef0123456789abcdef01234"
+
+# logging, takes inspiration from Insp
+logging:
+ -
+ # how to log these messages
+ #
+ # file log to a file
+ # stdout log to stdout
+ # stderr log to stderr
+ # (you can specify multiple methods, e.g., to log to both stderr and a file)
+ method: stderr
+
+ # filename to log to, if file method is selected
+ # filename: ircd.log
+
+ # type(s) of logs to keep here. you can use - to exclude those types
+ #
+ # exclusions take precedent over inclusions, so if you exclude a type it will NEVER
+ # be logged, even if you explicitly include it
+ #
+ # useful types include:
+ # * everything (usually used with exclusing some types below)
+ # server server startup, rehash, and shutdown events
+ # accounts account registration and authentication
+ # channels channel creation and operations
+ # opers oper actions, authentication, etc
+ # services actions related to NickServ, ChanServ, etc.
+ # internal unexpected runtime behavior, including potential bugs
+ # userinput raw lines sent by users
+ # useroutput raw lines sent to users
+ type: "* -userinput -useroutput"
+
+ # one of: debug info warn error
+ level: info
+ #-
+ # # example of a file log that avoids logging IP addresses
+ # method: file
+ # filename: ircd.log
+ # type: "* -userinput -useroutput -connect-ip"
+ # level: debug
+
+# debug options
+debug:
+ # when enabled, Ergo will attempt to recover from certain kinds of
+ # client-triggered runtime errors that would normally crash the server.
+ # this makes the server more resilient to DoS, but could result in incorrect
+ # behavior. deployments that would prefer to "start from scratch", e.g., by
+ # letting the process crash and auto-restarting it with systemd, can set
+ # this to false.
+ recover-from-errors: true
+
+ # optionally expose a pprof http endpoint: https://golang.org/pkg/net/http/pprof/
+ # it is strongly recommended that you don't expose this on a public interface;
+ # if you need to access it remotely, you can use an SSH tunnel.
+ # set to `null`, "", leave blank, or omit to disable
+ # pprof-listener: "localhost:6060"
+
+# datastore configuration
+datastore:
+ # path to the datastore
+ path: /etc/ergo/ircd.db
+
+ # if the database schema requires an upgrade, `autoupgrade` will attempt to
+ # perform it automatically on startup. the database will be backed
+ # up, and if the upgrade fails, the original database will be restored.
+ autoupgrade: true
+
+ # connection information for MySQL (currently only used for persistent history):
+ mysql:
+ enabled: false
+ host: "localhost"
+ port: 3306
+ # if socket-path is set, it will be used instead of host:port
+ #socket-path: "/var/run/mysqld/mysqld.sock"
+ user: "ergo"
+ password: "hunter2"
+ history-database: "ergo_history"
+ timeout: 3s
+ max-conns: 4
+ # this may be necessary to prevent middleware from closing your connections:
+ #conn-max-lifetime: 180s
+
+# languages config
+languages:
+ # whether to load languages
+ enabled: false
+
+ # default language to use for new clients
+ # 'en' is the default English language in the code
+ default: en
+
+ # which directory contains our language files
+ path: /etc/ergo/languages
+
+# limits - these need to be the same across the network
+limits:
+ # nicklen is the max nick length allowed
+ nicklen: 32
+
+ # identlen is the max ident length allowed
+ identlen: 20
+
+ # channellen is the max channel length allowed
+ channellen: 64
+
+ # awaylen is the maximum length of an away message
+ awaylen: 390
+
+ # kicklen is the maximum length of a kick message
+ kicklen: 390
+
+ # topiclen is the maximum length of a channel topic
+ topiclen: 390
+
+ # maximum number of monitor entries a client can have
+ monitor-entries: 100
+
+ # whowas entries to store
+ whowas-entries: 100
+
+ # maximum length of channel lists (beI modes)
+ chan-list-modes: 60
+
+ # maximum number of messages to accept during registration (prevents
+ # DoS / resource exhaustion attacks):
+ registration-messages: 1024
+
+ # message length limits for the new multiline cap
+ multiline:
+ max-bytes: 4096 # 0 means disabled
+ max-lines: 100 # 0 means no limit
+
+# fakelag: prevents clients from spamming commands too rapidly
+fakelag:
+ # whether to enforce fakelag
+ enabled: true
+
+ # time unit for counting command rates
+ window: 1s
+
+ # clients can send this many commands without fakelag being imposed
+ burst-limit: 5
+
+ # once clients have exceeded their burst allowance, they can send only
+ # this many commands per `window`:
+ messages-per-window: 2
+
+ # client status resets to the default state if they go this long without
+ # sending any commands:
+ cooldown: 2s
+
+# the roleplay commands are semi-standardized extensions to IRC that allow
+# sending and receiving messages from pseudo-nicknames. this can be used either
+# for actual roleplaying, or for bridging IRC with other protocols.
+roleplay:
+ # are roleplay commands enabled at all? (channels and clients still have to
+ # opt in individually with the +E mode)
+ enabled: false
+
+ # require the "roleplay" oper capability to send roleplay messages?
+ require-oper: false
+
+ # require channel operator permissions to send roleplay messages?
+ require-chanops: false
+
+ # add the real nickname, in parentheses, to the end of every roleplay message?
+ add-suffix: true
+
+# external services can integrate with the ircd using JSON Web Tokens (https://jwt.io).
+# in effect, the server can sign a token attesting that the client is present on
+# the server, is a member of a particular channel, etc.
+extjwt:
+ # # default service config (for `EXTJWT #channel`).
+ # # expiration time for the token:
+ # expiration: 45s
+ # # you can configure tokens to be signed either with HMAC and a symmetric secret:
+ # secret: "65PHvk0K1_sM-raTsCEhatVkER_QD8a0zVV8gG2EWcI"
+ # # or with an RSA private key:
+ # #rsa-private-key-file: "extjwt.pem"
+
+ # # named services (for `EXTJWT #channel service_name`):
+ # services:
+ # "jitsi":
+ # expiration: 30s
+ # secret: "qmamLKDuOzIzlO8XqsGGewei_At11lewh6jtKfSTbkg"
+
+# history message storage: this is used by CHATHISTORY, HISTORY, znc.in/playback,
+# various autoreplay features, and the resume extension
+history:
+ # should we store messages for later playback?
+ # by default, messages are stored in RAM only; they do not persist
+ # across server restarts. however, you may want to understand how message
+ # history interacts with the GDPR and/or any data privacy laws that apply
+ # in your country and the countries of your users.
+ enabled: true
+
+ # how many channel-specific events (messages, joins, parts) should be tracked per channel?
+ channel-length: 2048
+
+ # how many direct messages and notices should be tracked per user?
+ client-length: 256
+
+ # how long should we try to preserve messages?
+ # if `autoresize-window` is 0, the in-memory message buffers are preallocated to
+ # their maximum length. if it is nonzero, the buffers are initially small and
+ # are dynamically expanded up to the maximum length. if the buffer is full
+ # and the oldest message is older than `autoresize-window`, then it will overwrite
+ # the oldest message rather than resize; otherwise, it will expand if possible.
+ autoresize-window: 3d
+
+ # number of messages to automatically play back on channel join (0 to disable):
+ autoreplay-on-join: 0
+
+ # maximum number of CHATHISTORY messages that can be
+ # requested at once (0 disables support for CHATHISTORY)
+ chathistory-maxmessages: 100
+
+ # maximum number of messages that can be replayed at once during znc emulation
+ # (znc.in/playback, or automatic replay on initial reattach to a persistent client):
+ znc-maxmessages: 2048
+
+ # options to delete old messages, or prevent them from being retrieved
+ restrictions:
+ # if this is set, messages older than this cannot be retrieved by anyone
+ # (and will eventually be deleted from persistent storage, if that's enabled)
+ expire-time: 1w
+
+ # this restricts access to channel history (it can be overridden by channel
+ # owners). options are: 'none' (no restrictions), 'registration-time'
+ # (logged-in users cannot retrieve messages older than their account
+ # registration date, and anonymous users cannot retrieve messages older than
+ # their sign-on time, modulo the grace-period described below), and
+ # 'join-time' (users cannot retrieve messages older than the time they
+ # joined the channel, so only always-on clients can view history).
+ query-cutoff: 'none'
+
+ # if query-cutoff is set to 'registration-time', this allows retrieval
+ # of messages that are up to 'grace-period' older than the above cutoff.
+ # if you use 'registration-time', this is recommended to allow logged-out
+ # users to query history after disconnections.
+ grace-period: 1h
+
+ # options to store history messages in a persistent database (currently only MySQL).
+ # in order to enable any of this functionality, you must configure a MySQL server
+ # in the `datastore.mysql` section.
+ persistent:
+ enabled: false
+
+ # store unregistered channel messages in the persistent database?
+ unregistered-channels: false
+
+ # for a registered channel, the channel owner can potentially customize
+ # the history storage setting. as the server operator, your options are
+ # 'disabled' (no persistent storage, regardless of per-channel setting),
+ # 'opt-in', 'opt-out', and 'mandatory' (force persistent storage, ignoring
+ # per-channel setting):
+ registered-channels: "opt-out"
+
+ # direct messages are only stored in the database for logged-in clients;
+ # you can control how they are stored here (same options as above).
+ # if you enable this, strict nickname reservation is strongly recommended
+ # as well.
+ direct-messages: "opt-out"
+
+ # options to control how messages are stored and deleted:
+ retention:
+ # allow users to delete their own messages from history?
+ allow-individual-delete: false
+
+ # if persistent history is enabled, create additional index tables,
+ # allowing deletion of JSON export of an account's messages. this
+ # may be needed for compliance with data privacy regulations.
+ enable-account-indexing: false
+
+ # options to control storage of TAGMSG
+ tagmsg-storage:
+ # by default, should TAGMSG be stored?
+ default: false
+
+ # if `default` is false, store TAGMSG containing any of these tags:
+ whitelist:
+ - "+draft/react"
+ - "react"
+
+ # if `default` is true, don't store TAGMSG containing any of these tags:
+ #blacklist:
+ # - "+draft/typing"
+ # - "typing"
+
+# whether to allow customization of the config at runtime using environment variables,
+# e.g., ERGO__SERVER__MAX_SENDQ=128k. see the manual for more details.
+allow-environment-overrides: true
diff --git a/default.yaml.patch b/default.yaml.patch
new file mode 100644
index 0000000..f85e61b
--- /dev/null
+++ b/default.yaml.patch
@@ -0,0 +1,62 @@
+--- ergo/default.yaml 2021-06-07 00:02:36.842375692 +0200
++++ default.yaml 2021-06-04 11:19:52.133542516 +0200
+@@ -1,3 +1,13 @@
++#####
++#
++# This is the default config file for the Ergo RPM packge.
++# It contains the same default settings as the default.yaml file shipped with Ergo,
++# except for disabled additional languages, but comes with adjusted paths to ensure a smooth installation.
++# Packaging date of this config: 04/06/2021 with package version: ergo-2.7.0_x86_64
++# NOTE: An existing /etc/ergo/ircd.yaml file will NOT be touched if you decide to reinstall or upgrade Ergo using the RPM package.
++# If new config options are implemented, you either have to add them manually after the upgrade, or delete/move this file before the upgrade.
++#
++#####
+ # This is the default config file for Ergo.
+ # It contains recommended defaults for all settings, including some behaviors
+ # that differ from conventional ircd+services setups. See traditional.yaml
+@@ -25,7 +35,7 @@
+ # network configuration
+ network:
+ # name of the network
+- name: ErgoTest
++ name: ErgoTestRPM
+
+ # server configuration
+ server:
+@@ -52,8 +62,8 @@
+ # this is a standard TLS configuration with a single certificate;
+ # see the manual for instructions on how to configure SNI
+ tls:
+- cert: fullchain.pem
+- key: privkey.pem
++ cert: /etc/ergo/.sec/fullchain.pem
++ key: /etc/ergo/.sec/privkey.pem
+ # 'proxy' should typically be false. It's for cloud load balancers that
+ # always send a PROXY protocol header ahead of the connection. See the
+ # manual ("Reverse proxies") for more details.
+@@ -736,7 +746,7 @@
+ # datastore configuration
+ datastore:
+ # path to the datastore
+- path: ircd.db
++ path: /etc/ergo/ircd.db
+
+ # if the database schema requires an upgrade, `autoupgrade` will attempt to
+ # perform it automatically on startup. the database will be backed
+@@ -761,14 +771,14 @@
+ # languages config
+ languages:
+ # whether to load languages
+- enabled: true
++ enabled: false
+
+ # default language to use for new clients
+ # 'en' is the default English language in the code
+ default: en
+
+ # which directory contains our language files
+- path: languages
++ path: /etc/ergo/languages
+
+ # limits - these need to be the same across the network
+ limits:
diff --git a/ergo-2.7.0.tar.gz b/ergo-2.7.0.tar.gz
deleted file mode 100644
index 627d50f..0000000
Binary files a/ergo-2.7.0.tar.gz and /dev/null differ
diff --git a/ergo-v2.7.0rc1+2.obscpio b/ergo-v2.7.0rc1+2.obscpio
new file mode 100644
index 0000000..a79ebfc
Binary files /dev/null and b/ergo-v2.7.0rc1+2.obscpio differ
diff --git a/ergo.obsinfo b/ergo.obsinfo
new file mode 100644
index 0000000..c83a941
--- /dev/null
+++ b/ergo.obsinfo
@@ -0,0 +1,5 @@
+name: ergo
+version: v2.7.0rc1+2
+mtime: 1622738473
+commit: 36703580fc460ec254f7dbfb0c86bc5c05395c0f
+
diff --git a/ergo.service b/ergo.service
new file mode 100644
index 0000000..e56070a
--- /dev/null
+++ b/ergo.service
@@ -0,0 +1,23 @@
+[Unit]
+Description=ergo
+After=network.target
+# If you are using MySQL for history storage, comment out the above line
+# and uncomment these two instead (you must independently install and configure
+# MySQL for your system):
+# Wants=mysql.service
+# After=network.target mysql.service
+
+[Service]
+Type=simple
+User=ergo
+Group=ergo
+WorkingDirectory=/etc/ergo
+ExecStart=/usr/bin/ergo run --conf /etc/ergo/ircd.yaml
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=on-failure
+LimitNOFILE=1048576
+# Uncomment this for a hidden service:
+# PrivateNetwork=true
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ergo.service.patch b/ergo.service.patch
new file mode 100644
index 0000000..a169608
--- /dev/null
+++ b/ergo.service.patch
@@ -0,0 +1,14 @@
+--- ergo/distrib/systemd/ergo.service 2021-06-07 00:02:36.842375692 +0200
++++ ergo.service 2021-06-04 11:14:19.195888633 +0200
+@@ -10,8 +10,9 @@
+ [Service]
+ Type=simple
+ User=ergo
+-WorkingDirectory=/home/ergo
+-ExecStart=/home/ergo/ergo run --conf /home/ergo/ircd.yaml
++Group=ergo
++WorkingDirectory=/etc/ergo
++ExecStart=/usr/bin/ergo run --conf /etc/ergo/ircd.yaml
+ ExecReload=/bin/kill -HUP $MAINPID
+ Restart=on-failure
+ LimitNOFILE=1048576
diff --git a/ergo.spec b/ergo.spec
index 6eeb6c7..eb1fe7f 100644
--- a/ergo.spec
+++ b/ergo.spec
@@ -1,6 +1,6 @@
Name: ergo
-Version: 2.7.0
-Release: 1
+Version: v2.7.0rc1+2
+Release: 0
Group: Productivity/Networking/IRC
Summary: IRCv3 Server
License: MIT
@@ -11,59 +11,50 @@ URL: https://oragono.io
Source0: %{name}-%{version}.tar.gz
#Go source:
Source1: vendor.tar.gz
-###
-# Dependencies for openSUSE
-###
+Patch0: default.yaml.patch
+Patch1: ergo.service.patch
+
+# Dependencies for openSUSE:
%if 0%{?suse_version}
BuildRequires: go >= 1.16
BuildRequires: golang-packaging systemd-rpm-macros systemd fdupes
Requires(pre): /usr/sbin/useradd, /usr/bin/getent
%endif
-###
-###
-# Dependencies for Fedora
-###
+# Dependencies for Fedora:
%if 0%{?fedora}
BuildRequires: golang go-rpm-macros systemd systemd-rpm-macros fdupes
Requires(pre): /usr/sbin/useradd, /usr/bin/getent
%endif
-###
%define __arch_install_post export NO_BRP_STRIP_DEBUG=true
%global provider_prefix github.com/ergochat/ergo
%global import_path %{provider_prefix}
-###
# Make go-rpm-macros happy!
-###
%if 0%{?fedora}
%global goipath github.com/ergochat/ergo
%global debug_package %{nil}
%endif
-###
# Okay openSUSE, let's stretch first!
-###
%if 0%{?suse_version}
%{go_nostrip}
%{go_provides}
%endif
-###
# Come on Fedora, you go along!
-###
%if 0%{?fedora}
%gopkg
%endif
%description
-Oragono is a modern IRC server written in Go.
+Ergo is a modern IRC server written in Go.
#A pretty cool one, that is!
%pre
-#Introducing Ms. Oragono!
+# Introducing Ms. Oragono!
/usr/bin/getent group ergo || /usr/sbin/groupadd -r ergo
/usr/bin/getent passwd ergo || /usr/sbin/useradd -r -g ergo -d /etc/ergo -s /sbin/nologin ergo
%if 0%{?suse_version}
@@ -71,33 +62,27 @@ Oragono is a modern IRC server written in Go.
%endif
%prep
-###
# Alright openSUSE, here we go!
-###
%setup -q -n %{name}-%{version}
-###
+%patch0 -p1
+%patch1 -p1
+
# Oh Fedora, you having bit of an headstart, eh?
-###
%if 0%{?fedora}
%goprep
%endif
%setup -q -T -D -a 1
-
%build
export GOFLAGS="-mod=vendor"
-###
# "I'm prepping too now!! Don't rush me!", shouts openSUSE
-###
%if 0%{?suse_version}
%goprep %{import_path}
%gobuild .
%endif
-###
# S'ok! I've got some extra work here...
-###
%if 0%{?fedora}
rm -rf "%{_builddir}/%{extractdir0}/_build/src/github.com/ergochat/ergo"
ln -s "%{_builddir}/%{name}-%{version}" "%{_builddir}/%{extractdir0}/_build/src/github.com/ergochat/ergo"
@@ -105,35 +90,27 @@ ln -s "%{_builddir}/%{name}-%{version}" "%{_builddir}/%{extractdir0}/_build/src/
%endif
%install
-###
# And.. installaction!
-###
%if 0%{?suse_version}
%goinstall
%gosrc
%endif
-###
# "Lame", moans Fedora, "I'm lifting some extra weights, not use some weird macro for my copyjobs!"
-###
%if 0%{?fedora}
install -m 0755 -vd %{buildroot}%{_bindir}
install -m 0755 -vp %{gobuilddir}/bin/* %{buildroot}%{_bindir}/
%endif
-###
# However after a short fight between the two, they continue doing some tasks in common, and achieve great teamwork.
-###
install -d -m 700 %{buildroot}%{_sysconfdir}/%{name}
-install -D -m 600 %{_builddir}/%{name}-%{version}/rpm/default.yaml %{buildroot}%{_sysconfdir}/%{name}/ircd.yaml
-install -D -m 644 %{_builddir}/%{name}-%{version}/rpm/%{name}.service %{buildroot}%{_unitdir}/%{name}.service
+install -D -m 600 %{_builddir}/%{name}-%{version}/default.yaml %{buildroot}%{_sysconfdir}/%{name}/ircd.yaml
+install -D -m 644 %{_builddir}/%{name}-%{version}/distrib/systemd/%{name}.service %{buildroot}%{_unitdir}/%{name}.service
install -d -m 755 %{buildroot}%{_sbindir}
ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rc%{name}
%check
-###
# Let's see who made their job well...
-###
%if 0%{?suse_version}
%gotest %{import_path}
%endif
@@ -142,21 +119,15 @@ ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rc%{name}
%gocheck
%endif
-###
# Alright, time to sum things up!!
-###
-###
# "Hah, I have a nice filelist ready to go!"
-###
%if 0%{?suse_version}
%gofilelist
%files -f file.lst
%endif
-###
# "Says the one WHO NEEDS a filelist!"
-###
%if 0%{?fedora}
%files
%endif
@@ -170,9 +141,7 @@ ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rc%{name}
%{_sbindir}/rc%{name}
%post
-###
# Some finishing touches, Fedora and openSUSE walk hand in hand, through filesystem's wonderland!
-###
%if 0%{?suse_version}
%service_add_post ergo.service
%endif
@@ -186,9 +155,7 @@ chown ergo:ergo %{_sysconfdir}/%{name}/.sec/fullchain.pem
chown ergo:ergo %{_sysconfdir}/%{name}/.sec/privkey.pem
chown ergo:ergo %{_sysconfdir}/%{name}/ircd.db
chmod 600 %{_sysconfdir}/%{name}/ircd.db
-###
# Nice! All the distros cheer in excitement about the newly installed package!
-###
echo "Welcome to Ergo!"
echo "To enable the service (auto-start): sudo systemctl enable ergo"
echo "To start the service now: sudo systemctl start ergo"
@@ -211,9 +178,13 @@ echo "The configuration is located in /etc/ergo/ircd.yaml"
%endif
echo "NOTE - The ergo.service does NOT restart automatically."
-###
# Rants from some h00man
-###
%changelog
+* Sun Jun 06 2021 Georg Pfuetzenreuter - 2.7.0-3
+- Removing CentOS blocks due to unresolved incompatibilities.
+* Sun Jun 06 2021 Georg Pfuetzenreuter - 2.7.0-2
+- Removing some empty comment lines which looked nice initially, but made the file very long.
+- Added debugpackage workaround to (hopefully) solve compatibility with CentOS.
+- Changed description from Oragono to Ergo.
* Sun Mar 07 2021 Georg Pfuetzenreuter - 2.7.0-1
- Initial release of the Ergo v2.7.0 RPM package (deprecating the Oragono package)
diff --git a/v2.7.0.tar.gz b/v2.7.0.tar.gz
deleted file mode 100644
index a5dff8d..0000000
Binary files a/v2.7.0.tar.gz and /dev/null differ
diff --git a/vendor.tar.gz b/vendor.tar.gz
index 5c73d69..f3c3592 100644
Binary files a/vendor.tar.gz and b/vendor.tar.gz differ